A short video showing how I fixed my vice to my workbench to make sure it is secure and safe to use.
I used basic stainless steel construction washers and M16 bolts to fix the vice to the top of the workbench. Once the holes were drilled and I had let in the washers, I used M14 bolts to fix the vice down, and a square washer and nut under the worktop to keep the fixing secure. Below are some links to some items we used:
Coach bolts amzn.to/3dULi7L
Draper soft jaws for vice - amzn.to/3cn5E9p
Record engineering vice - amzn.to/3blHydY
Makita combi drill and impact driver set - amzn.to/3fB7CFf
Square washers amzn.to/3bEkIy7
Please support us by subscribing to this channel!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting The Restoration Hut so we can continue to provide you with free content!
Негізгі бет Fitting a Vice to a Workbench | ENGINEERING VICE | TIMBER WORKBENCH
No video
Пікірлер: 3