Definitely a chassis system to consider if you’re running a cz457! It comes with everything you might need 👍
@tomaszazarz3781
2 ай бұрын
Dziękuje za prezentację . Pozdrawiam z Polski.
@JonCresswellUk
2 ай бұрын
You’re welcome ☺️ greetings from England
@plinkspot8750
Жыл бұрын
Went with a EC Tuner and small suppressor today. I was skeptical to say the least. After a bit of tuning it made remarkable changes to my groupings. Went from .6 at 50m to .25 - .35. Not just 1 group. I shot 12 groups to make sure it was repeatable. Very impressed
@JonCresswellUk
Жыл бұрын
That’s great 😃 sounds like you found the sweet spot
@martinclark5267
Жыл бұрын
Looking forward to range testing. Keep up the good work
@JonCresswellUk
Жыл бұрын
Me too 😁 gotta love range days. Thanks 😊
@MarcGoossen
7 ай бұрын
Good afternoon. Thank you for this really great video. May I ask one question, please ? How do you proceed when you want to clean your rifle, do you have to unscrew the entire butt to be able to access the barrel and properly clean it with a rod, please ?
@JonCresswellUk
7 ай бұрын
No, there is an Allen key grub screw on the right hand side of the stock that releases the cheek pad so you can clean it
@MarcGoossen
7 ай бұрын
Thank you for your helpful response@@JonCresswellUk
@JonCresswellUk
7 ай бұрын
@user-sq8yb1mv4u if you look on my Instagram I’ve put a picture up in my story and circled the screw.
@TMFShooting
Жыл бұрын
Another Great Video 💯 Thanks Jon 💥💥💥💥💥💥💥💥💥💥💥💥💥💥
@JonCresswellUk
Жыл бұрын
Thanks for your support 👍👍
@Dayattherange
Жыл бұрын
Love it Jon -- I hope you are going to enter that thing in the Dayattherange Z Challenge or either the Dayattherange Smallest Group Challenge.
@JonCresswellUk
Жыл бұрын
Not seen these challenges before, but just googled them 😊 there are some real tight groups in the rankings.
@Dayattherange
Жыл бұрын
@@JonCresswellUk and I think you can be right up there.
@JonCresswellUk
Жыл бұрын
Thank you 🙏 I’ll see how I get on, hopefully luck will be in my side.
@andycarless9069
Жыл бұрын
Very Nice Jon 👌Great Review Cheers.
@JonCresswellUk
Жыл бұрын
More of a user guide than a review I guess, but I think it’s a good contender if someone is after a chassis system.
@wyles965
Жыл бұрын
That is very nice! Good video as always Jon.
@JonCresswellUk
Жыл бұрын
Thanks 😊 do you have a chassis on yours?
@wyles965
Жыл бұрын
@@JonCresswellUk Still waiting for my license but shoot CZ 457s at the club most weeks. Will definitely be putting this on my list of future buys 🤣
@JonCresswellUk
Жыл бұрын
The CZ is a good solid platform and I think that ROME make some great chassis options (they do a tactical version too)
@wyles965
Жыл бұрын
@@JonCresswellUk I've not been able to find a UK retailer for the chassis on a quick Google search, are you buying directly from ROME?
@JonCresswellUk
Жыл бұрын
The UK distributor is instagram.com/victrixuk?igshid=YmMyMTA2M2Y=. Ping Gary a message and say I sent you 👍👍. I don’t get commission or anything, but it’s good for them to know who signposted you to him 😊🤙
@wellsgb1957
Жыл бұрын
Nice 👍🏻👍🏻
@JonCresswellUk
Жыл бұрын
It’s a nice chassis, I’m happy with it
@FS-dc3tk
Жыл бұрын
Thank you Jon- I bought a ROME Chassis Lorica for my CZ457 last autumn. So as with all CZ457 stocks, there should be a flat surface in front of the front action screw for the action to rest on. On the LORICA chassis, there was not this bedding surface and the action was in contact with the chassis over its entire length. I therefore had to manually rework the chassis by installing an aluminum block. How is the bedding for the front screw solved on the MOTUS?
@JonCresswellUk
Жыл бұрын
Just dropped a picture for you on my KZitem community chat so you can see it.
@PassionforRifles
Жыл бұрын
Nice chassis Jon. Did it improved the accuracy as well? I tested same rifle with the original stock, accuracy was not top on.
@JonCresswellUk
Жыл бұрын
I’ve yet to test that at the range. It will certainly allow me to add accessories like bipods, tripods, weights etc easer. It also allows for tool less adjustments to make the rifle fit. At the end of the day it’s still the same barrel and action, but having a sturdier chassis may help. Proof will be on the range
@hanszarkov7807
Жыл бұрын
Hi Jon, I would like to switch from the Tikka stock to a chassis system for my Tikka T3x Super Varmint in .308 Win. After extensive internet research, I think the Rome Motus chassis would be a good choice. Can you agree with this? Where I am still a little skeptical is the buttstock. Here I fear that the butt stock could wobble a bit. What is your experience with the Rome chassis for your CZ 457? Many greetings from Austria, Hans
@JonCresswellUk
Жыл бұрын
The butt stock is solid! It’s held in by 4 bolts. I’ve taken it to the range but not used it at a comp yet. I’m impressed so far as it has everything you need in the box 📦 you have a couple of options for the Tikka T3: the www.romeaccessories.it/en/prodotto/chassis-lorica-r-per-tikka-t3-2/ (which gives it the look and feel of the Gladio rifle - like the one I have in .308), and www.romeaccessories.it/en/prodotto/chassis-motus-m-per-tikka-t3-2/. Both are nice chassis, ones a tactical style and one is more sports/PRS style chassis.
@gauthierpeel5620
9 ай бұрын
very nice prez ! what's the global weight after upgrade ?
@JonCresswellUk
9 ай бұрын
I’ll weigh it when I next grab it out the cabinet, but my calculations so far are: CZ barrelled action - ??? Scope rings - ??? Strike Eagle - 1.9 lb / 30.4 oz ROME Chassis - 4.85 lb / 77.6 oz Bipod - 1.14 lb / 18.16 oz Coletac backbone - 0.31 lb / 5 oz Coletac flat bag - 0.79 lbs / 12.68 oz Total 8.99 lb / 143.84 oz (minus the barrelled action and scope rings)
@gauthierpeel5620
9 ай бұрын
@@JonCresswellUk thanks for your detailed answer !
@castolin7850
Жыл бұрын
Hy, it is possible to remove the cheek piece to clean the barrel? THX
@JonCresswellUk
Жыл бұрын
Hi, not that I am aware of. I remove from the chassis to clean 👍
@alextalis-hn9mp
Жыл бұрын
Very cool chassis. Is it available in US.
@JonCresswellUk
Жыл бұрын
Yes, on the website the importer is: VICTRIX USA LLC 100 Beiersdorf Drive Rutherford College, NC 28671 Importer of Firearms www.victrixarmaments-usa.com
@alextalis-hn9mp
Жыл бұрын
@@JonCresswellUk their website is down
@JonCresswellUk
Жыл бұрын
Just googled it - looks like they have a phone number if that helps +1 828-874-8560
@ianlarman3641
10 ай бұрын
Trying to source one. Where can I buy? Thanks
@JonCresswellUk
10 ай бұрын
This is where I bought mine www.romeaccessories.it/en/prodotto/chassis-motus-per-cz457-2/
@rudolphferdinand3634
Жыл бұрын
A competition 22LR if you have the strength brain-wise, do it! Go ALL out, the high-priced 22LR ammunition, why hold back? Enjoy the sport. But with rifle scopes, I'll push TRACT Toric line: 4-20x50mm30mmT, 4.5-30x56mm34T, and Tract's new 4-25x50mm34T with a 47 elevation Mrad.
@JonCresswellUk
Жыл бұрын
I’ve not looked through a Tract, do you run one on yours?
@rudolphferdinand3634
Жыл бұрын
To start with, I bought somewhat cheap rifle scopes, but I desired a quality rifle scope; Tract Toric 4-20x50mm cost me USD 1000 with German Schott HT glass. The purchase is from Tract Optics direct to the buyer; cost savings no middleman. The Tract is mounted on a bolt gun in 6.5 Creedmoor.
@rudolphferdinand3634
Жыл бұрын
@@JonCresswellUk, a KZitem “Pursuit of Accuracy” all 22LR rifles installed with Tract optics.
@JonCresswellUk
Жыл бұрын
Sounds good 👌 I bet the 6.5 is a tack driver 😎
@plinkspot8750
Жыл бұрын
I could be wrong, but I think you are supposed to always torque the rear 1st. Also considering a chassis for my LRP. Is very difficult to get enough weight in the front for NRL/PRS with the standard stock
@JonCresswellUk
Жыл бұрын
Thanks - I’m not sure it makes a difference 🤷♂️. I wanted a full length chassis with mlok to give me that option too 👍, it’s got a nice feel to the chassis. I’ll see how I go at my next PR 22 match (like PRS/NRL).
Пікірлер: 53