I just got accepted for my first plumbing apprenticeship, been watching your videos non-stop. Thank you!
@RogerWakefield
Жыл бұрын
Great job! Congratulations!
@michaelribbins5708
4 ай бұрын
My issue was the fill valve. I saw 5 videos on how to replace it but this was the first showing how to take it apart and clean it. Thank you!
@RogerWakefield
4 ай бұрын
Well I'm glad the 6th video worked out for you!
@MrEugeneleo
21 күн бұрын
probably the best video so far
@michaelj6392
8 күн бұрын
Hello sir, Just wanted to say thank you for the video! This is my first time dealing with one of these canister style toilets. Per your recommendation, I checked the seal and it had an obvious tear in it. I replaced that for $8 and she seems good as new now, no more running! Appreciate the video!
@Jemmeh
10 ай бұрын
Thanks Roger. Spent $10 and fixed it myself in about 10 minutes. Saved me a lot of hassle!
@RogerWakefield
10 ай бұрын
Glad it helped
@z0ld0r
2 ай бұрын
You just saved me $$ from having to replace two leaking toilets. Thank you!
@craiggeorge2775
27 күн бұрын
Thank you! Brand new toilet was "leaking" after a couple flushes Took apart the diaphragm, reassembled and now it's fine.
@RonWadlinger
4 ай бұрын
Thank you so much for posting this video. I have very little plumbing knowledge and was nearing my wit’s end trying to fix my toilet. After watching this video, I was able to quickly and easily diagnose the issue (a faulty fill valve) and get it fixed. Much appreciated!
@donovanmorgan9896
4 ай бұрын
Thank you for the video sir. I could not have done the job without it!
@mikeeiffert
6 ай бұрын
Very helpful. Canister style drain is new to me. Didn't know I could unscrew to clean or replace gasket. Thank you.
@RogerWakefield
6 ай бұрын
You bet!
@DownSouthSlots504
Жыл бұрын
Thanks for all the help with knowledge
@RogerWakefield
Жыл бұрын
You bet!
@jeffkessel3318
Жыл бұрын
Thanks Roger. My canister seems to close immediately after releasing the handle and I get a low volume flush. Is there an adjustment I am missing or does the unit need to be replaced?
@whitters1211
4 ай бұрын
So helpful! Thank you!
@RogerWakefield
4 ай бұрын
You're so welcome! What made it helpful for you?
@nathanh.6827
Жыл бұрын
If everyone knew of Roger, the whole world would wanna be a plumber
@UltimateDiyer
5 ай бұрын
Another great video Roger
@RogerWakefield
5 ай бұрын
Glad you enjoyed it
@markwittick2592
5 күн бұрын
I have the same Kohler canister mechanism. After a weeks worth of flushing the canister will have rotated 90 degrees clockwise and the chain will no longer be pulling straight up and will start to bind. Any ideas as to the solution? Thanks:)
@benkenobi9930
Жыл бұрын
Hey I have an union pipefitter interview tomorrow and I’m wondering what kind of questions do you think they will ask me ?
@JenPerry-y2u
Ай бұрын
But you didn't cover if the actual base is the problem and if you need to replace the base which covers the large hole where the water leaves. That was my problem and it turns out the three prongs which hold the base were broken and the whole base needed to be replaced. I couldn't figure out how to secure it because it was so hard to twist under the ceramic so the whole thing didn't move. Any tips there??? I finally got it but it was so hard.
@jakelilevjen9766
Жыл бұрын
Great video! Thanks for the tips!
@RogerWakefield
Жыл бұрын
No problem!
@igenjenco2181
5 ай бұрын
I just installed one of these styles toilets but the floater is getting stuck at the bottom I have to tap the floater with my finger then it will work any input or advice
@kolohe0782
10 ай бұрын
Excellent 👍 Thank You
@RogerWakefield
10 ай бұрын
Our pleasure!
@NoNeedtoknow-o2c
2 ай бұрын
My problem is that the canister will NOT "unlock". The stem will not disengage, no matter whether I try from the top or try turning from the bottom. I'm afraid if I try too hard I will completely break the piece, but can find nothing online to advise. Cannot get the canister off to replace a simple seal.
@MrEugeneleo
21 күн бұрын
can the bottom gasket also rotten causing leak?
@RogerWakefield
21 күн бұрын
If it's rotten, it could
@UgochukwuIfejika
8 ай бұрын
I'm like your ball valve wc tank
@brianpite0893
Жыл бұрын
Very informative Roger. I have this Kohler toilet that needs a flapper . It has a pull mechanism through lid. I can't imagine how to get the lid off let alone adjusting the chain!
@RogerWakefield
Жыл бұрын
This is interesting . You should post some pictures on my Reddit group. www.reddit.com/r/RogerWakefieldPosts
@UgochukwuIfejika
8 ай бұрын
Nice wast pipe i love it
@AndrewGenovese-lo3kw
Жыл бұрын
The Kohler Aquapiston is better than a flapper flappers are still good
@subliminal-damage
Жыл бұрын
Thought the title was "DIY Toilet Paper" and Roger posing with a giant blender and had a double take.
@Rajuuutube
3 ай бұрын
👏👏👏👏
@Jay-ws7tv
10 ай бұрын
THe black hose in mine keeps popping out, is that normal?
@beverlyannsjoblom
9 ай бұрын
Great info but PLEASE turn off the music or at least turn it down so we are not distracted by it. Thank you!
@RogerWakefield
9 ай бұрын
👍
@CTanasa
Ай бұрын
Thank you very much Sir. Very useful.
@dannylopez8513
Ай бұрын
My seal had cut. Easily replaced. Thank you
@chrisliles1668
2 ай бұрын
why are there 4 holes in the canister
@WillFixThat
Жыл бұрын
I’ll have to make sure Matt watches this or else we need a plumber soon! I hear him tinkering with his bathroom toilet ! 😂
@RogerWakefield
Жыл бұрын
🤣 let me know!
@suzyhawkins912
Ай бұрын
Thank you so much for your video! I'm a single Mom & homeowner who tries to tackle repair jobs myself when possible. I had two issues, fill valve wouldn't stop filling after flushing, & when cutting the water off, all of the water would drain out of the back of the tank . After your video, I was able to fix both issues with replacing the diaphragm seal in the fill valve & the cannister flush valve seal. It was very easy and cost me less than $10! THANKS!!!
@dianafedosoff9618
5 ай бұрын
I have the same exact one but the yellow circular piece attached to the hose broke off and flies out of the canister part when flushed and then keeps running. Do I have to replace the whole canister part?
@HoraceGorman
5 ай бұрын
The base for the canister is my Kohler came out of the toilet. That is, when turning the canister instead of the upper portion releasing, the lower portion including the thick rubber ring came out. It appears that to replace that lower part, one has to press very hard while turning so that the tangs fit under the rubber ring holding against the bottom of the tank. Is that correct?
@cassgil8448
Жыл бұрын
Hey Roger (or anyone in the community with Water Heater experience), I would love your personal opinion. I just noticed that my Gas Water Heater has a small leak (for now). The two options I was deciding between, are to replace it with another Gas Water Heater or maybe trying a Heat pump version. Do you have a preference?? I looked but haven't seen you do a comparison yet. I'm early in the trades and do have 1 year experience in HVAC, and with time I'm sure ill be able to work on it. Any advice would be greatly appreciated. Thank you. as-well as anyone else. About me, I have a 3bed 2 bath, its just my Fiance and myself right now w/ some visitors who stay over throughout the year. My WH now is a 40 gal 38k btu. I do live in CA, so there are rebates for the heat pumps.
@Arctisity
5 ай бұрын
Opened the back and it confused the heck out if me. Was able to fix it. Thanks!
@UgochukwuIfejika
8 ай бұрын
God will give you long life year job enter my heart and head
@l.l.e.7104
8 ай бұрын
I've never in 50 years seen a cannister style.
@anonuser
9 ай бұрын
You don't describe how to adjust the fill valve. Turning it right or left, what each does. Also the color is significant. Yellow is a slow fill, red is a fast fill and I have no idea what black is. Sick of this Kohler crap.
Пікірлер: 59