This guy knows his craft. Thanks for the expertise without forcing me to hear all the blah blah rhetoric or talk show style presentations. By the way you look like Mitchell Hooper 2023 Worlds Strongest Man.
@CityscapeBrewing
Жыл бұрын
Thanks Haha... 🤔I'll have to check it out.
@chrisobrien2528
Жыл бұрын
Will definitely keep this tip in mind, thanks!
@CityscapeBrewing
Жыл бұрын
You're welcome! It works great!
@stickler5150
11 ай бұрын
What a cool trick, this actually works haha. Genius. Thanks mate. For anyone trying this I wouldn't do bursts of anymore than 3 - 5 seconds at a time and work from there. Cheers 🍻
@CityscapeBrewing
11 ай бұрын
💯🤘
@trichard5106
Ай бұрын
Thanks !!
@John-lc2lz
Жыл бұрын
Another keg of beer was saved because of this video. Thanks from 🇨🇦
@CityscapeBrewing
Жыл бұрын
Haha glad to save every pint I can! Glad it worked! 🍻
@barneyroybal1406
Жыл бұрын
Your video was a beer life saver. After 3 years of kegging, I finally had a over carbonated beer on my hands and trying to figure out how to fix the problem was a journey to say the least. After trying several tips from youtubers that didn't help, I happened upon your video. My problem was very similar to what you were showing on your video. I gave it a try and, Voile, It worked beautifully and on the first attempt. Thanks again for what you do. Keep up the great videos. Peace.
@CityscapeBrewing
Жыл бұрын
You're welcome! Glad to help! 🍻
@will5430
Жыл бұрын
Great tip!
@CityscapeBrewing
Жыл бұрын
Thanks! It works well! 🍻
@barry1903
Жыл бұрын
Great tip Dennis! Putting the keg in a 5gal bucket keeps the process clean too.
@CityscapeBrewing
Жыл бұрын
Yep. I've had some that don't foam that much and some that make a mess. Depends on how much beer is in the keg and how over carbonated it is.
@rlgriffis
Жыл бұрын
Interesting. Never heard of this method. Will try it next time.
@CityscapeBrewing
Жыл бұрын
💯 works great!
@RobTalksBeer
Жыл бұрын
Great tip for anyone who has ever over carbed a keg, and who hasn't at least once.
@CityscapeBrewing
Жыл бұрын
Right!? If you haven't done that, I'd argue you haven't brewed enough haha.
@matex118
2 ай бұрын
Thank's man, it worked perfectly! I had set 10 Psi too much to carbonate my keg, and I realized it today while I have an event tomorrow. It really saved my day!
@CityscapeBrewing
2 ай бұрын
That's awesome! Glad to help! I've definitely been there before. Hope your event goes well. 🍻
@LordKorea1510
Жыл бұрын
I'm so thankful for this video. Did my very first forced carbonated beer in a keg and obviously I messed up... Only thing I got into my glass was foam. Followed your instruction using ~12 psi and now it's almost perfect, maybe even slightly undercarbonated after repeating the "blow off" 5 times. But it will recarbonate over time and is drinkable now. You, Sir, deserve a medal for saving 20 liters of beer! Cheers!
@CityscapeBrewing
Жыл бұрын
You're absolutely welcome! This is the whole reason why I started the channel, to help other brewers. It took me a long time to learn and I had to pull it from 100 different places when I got started. 🍻 I hope the beer is delicious!
@LordKorea1510
Жыл бұрын
@@CityscapeBrewing The beer is delicious! Thanks again, mate! Greetings from Munich, Germany!
@bryanlane267
Жыл бұрын
Update: THANK YOU! I replaced the liquid connector with the gas line connector. Left the original gas port without a connection. Then followed your directions on purging, the foam purged out of the gas port. 5 minutes later, I was done. Now I am pouring perfect beer. Thanks again
@CityscapeBrewing
Жыл бұрын
Awesome! I'm glad that worked! 🍺
@bryand8581
Жыл бұрын
Good video!
@CityscapeBrewing
Жыл бұрын
Thanks!! Glad you liked it!! 🍻
@seewaage
8 ай бұрын
I have a tendency to over carbonate my beers so thanks for the ideas!
@CityscapeBrewing
8 ай бұрын
You're welcome 🍻
@codebowl
Жыл бұрын
Nice tip, I will have to try that next time I get an over carbonated beer :)
@CityscapeBrewing
Жыл бұрын
Yeah I've had a LOT of people reach out to me about this. They hook up gas at 30 psi and then forget it for 4 days haha. It works!
@chrisobrien2528
Жыл бұрын
@@CityscapeBrewing I just recently moved to pressure fermentation for my last two brews, and it looks like my days of forced pressure carbonation may be over! I was able to source out the parts for my homemade spunding valves between my homebrew shop, a local hardware store, and a big-box hardware store (known for their blue buckets)😆 for a few of the remaining fittings. Along with installing a floating dip tube in the kegs, I ferment/naturally carbonate/dispense right from the same vessel. This might be a great video idea down the road!
@CityscapeBrewing
Жыл бұрын
Good idea! May have to look into that.
@codebowl
Жыл бұрын
I as well went to pressure with the fermzilla and love it
@bryanlane267
Жыл бұрын
thanks for the video. I'm currently dealing with an over carbonated commercial keg. It's driving me crazy. I've followed all the steps to clean the system, and still similar to your first pour. Then I used a picnic tap, still foamy, so it isn't my system. I'm going to try your method, I will reply back with results. Thanks
@CityscapeBrewing
Жыл бұрын
I'm not sure if this will work with a commercial keg. It depends on if they're dip tube goes all the way down to the bottom or not. This only works when the dip dube from the serving line can go all the way down and pull out the CO2. Another suggestion is to use a longer serving line for the picnic tap... That will give it some resistance and friction and should slow down the beer and not be as foamy
@bryanlane267
Жыл бұрын
@@CityscapeBrewing thanks for the suggestion. The other problem is I can't open the keg, so there would be no place for the foam to be expelled. I'm back to the beginning again.
@CityscapeBrewing
Жыл бұрын
Yeah, a longer tap line might be your only choice.... You don't want to pump new CO2 in there or else it will get worse. Another choice is to just keep drinking it without it hooked to CO2 at all... But the pressure release by creating more headspace when the beer empties
@bryanlane267
Жыл бұрын
@@CityscapeBrewing a thought, I swap the gas and serving line connectors on the commercial tap. Push gas down the serving line, and keep the gas line (that is now the serving line) open to let liquid out. My question is will foam/beer be expelled out of the commercial tap via the gas line?
@swish4866
Жыл бұрын
Are you using serving PSI (10-12) during the process to remove excess carbonation?
@CityscapeBrewing
Жыл бұрын
Yes. I don't change the pressure.
@sangofficial2455
Жыл бұрын
How i do it with coupler S ? My beer is too much foam .
@CityscapeBrewing
Жыл бұрын
Not sure how to help you there. You need the gas to go through the bottom dip tube
@edmunddavis2585
Жыл бұрын
I did what you said...both techniques and I still have foam bombs. My other tap pours fine so it is not a line length issue and both are cold. Annoying.
@CityscapeBrewing
Жыл бұрын
Have you tried switching the kegs to the one that pours fine and see?
@XkannsenX
Жыл бұрын
white connectors usualy connect well in the beer side
@CityscapeBrewing
Жыл бұрын
Yeah I've used them before but I also had one stick on so bad that I had to break the connector to get it off. So now I just tell people to switch them quick so they don't have that problem. 🍻
@barneyroybal1406
Жыл бұрын
Sorry. I haven't found that to be the case!
@andrewtitcombe8378
Жыл бұрын
And there is me trying to use this method to quick carbonate my kegs, seems i am making things worse? I Also use a carbonation stone on the end of a flexible line on the Co2 side of a keg to fast carbonate soda water. And this works , so why does this work to un-carbonate an over carbonated beer ?
@CityscapeBrewing
Жыл бұрын
Because the CO2 comes from the bottom of the keg on the dispensing line and the CO2 pulls the smaller bubbles in the beer to decarbonate while you are pulling the pressure relief valve.
@Alchemy_Anarchy
Жыл бұрын
Will this work if you have a floating dip tube?
@CityscapeBrewing
Жыл бұрын
No. The CO2 needs to come up through the beer from the bottom, pulling out the carbonation.
@michaelpeslow2839
4 ай бұрын
loud background music.
@estoware
Жыл бұрын
Honestly, you went from a nice foamy pour to a flat pour. The one you call perfect , I would reject. 1-1.5 inches of foam is the norm. You also wasted a lot of beer (foam is beer too).
@CityscapeBrewing
Жыл бұрын
When I first poured the beer I had about an inch of beer at the bottom of the glass and the rest was foam. Even if the beer ends up under carbonated, it will recarbonate by sitting at normal serving pressure. I agree you want 1-1.5 inches of head, and it will end up that way even if you let out more carbonation with this process. The point of the video was to show people how to get carbonation out of their beer when it is very over carbonated. Sometimes this is the only way to do it, even if you lose a pint in foam.
Пікірлер: 56