Nice job keeping the camera rolling every time you ran into a tough part. I hate videos that cut away at the first sign of trouble, and next thing you know, the problem part is magically off! 😂
@jonck146
Жыл бұрын
I’ve been giving my 05 mdx some well deserved love this year after 250000 milesNew valve cover gasket and new pcv valve as it was leaking engine oil too. I also did a valve adjustment while doing all that. Put new control arms in the front and new tie rods, all 4 sway bar links, 2 struts in the back. My next job I’ll take care of the spots in the video as they leaking pretty bad. I also have a minor transmission leak that I can’t find the source. I’ll give that some attention too and clean the shift solenoids on top of the transmission and do a 3/3 flush. Shifting from 2 to 3 is a bit harsh. If you have a high mileage mdx or a pilot don’t forget to change your differential fluid and the transfer case fluid. Awesome video.
@hexZ06
6 ай бұрын
Nice! Did you do the valve adjustment yourself??
@jonck146
6 ай бұрын
@@hexZ06 it only needed one at 220k that I had a local shop do for me for about 500$.
@bcw686
Жыл бұрын
I am about to do this to my 2004 Acura TL this weekend, didn't even know this had an O ring. I got a quote from local Pep Boys and they wanted 2k saying everything was leaking. Doing the valve cover gaskets, vtec solenoid, now I will look at this one as well
@mrc79
Жыл бұрын
Great video on Leaks and common areas for the V6.
@bobhale3902
6 ай бұрын
Those cam thrust covers install a lot easier if you put the new o-ring on them and then put the assembly in the freezer for about 90 minutes. Did this and it popped right in. It's pretty easy to damage the new o-ring if it doesn't go straight in.
@twtw9589
Ай бұрын
Thank you for your How To repair videos! They are extremely helpful and insightful making problem solving, repair, and maintenance so much easier for the DYIer.
@digitalbreakthroughs
2 жыл бұрын
I’m still driving my 1989 Honda Accord. It has 282,000 miles with same engine and transmission. I took care of her. It has an oil leak, and I know I’d be foolish to put thousands into fixing it. But I don’t want to give it up. (Just bought a second car after 33 years driving my Honda.)
@carljohnson4996
Жыл бұрын
You wouldn’t be foolish at all putting money into a car you had for that long of anything that’s pretty cool I’d definitely keep taking care of her after it took care of me for that long especially on its original drivetrain
@jaywinters2483
Жыл бұрын
take care of her. I had a Volvo 850 with 380K when the odometer quit working and drove it for over 10 years daily after odometer quit. Back and forth to FL, ME all over. Keep taking care of her.
@Nicedesk
3 ай бұрын
Like that magnet strapped to the oil filter!
@andyhamilton8940
2 жыл бұрын
07 pilot. My Vtek solenoid on rear cylinder head up top near fire wall leaked where the two halves mated. I was able to remove it and split the two parts and re seal with honda bond. No o ring available for this. They do sell the one where it mates to the head if your is leaking there.
@benporter6576
Жыл бұрын
I was coming here to mention this leak! This one gets it bad because the oil doesn't drain away where these surfaces meet inside the v-tec housing. If you've tried everything else and you're still stumped, this is the culprit!
@hugo5086
2 жыл бұрын
Great technique man how you "get oil" on the cam o ring. 👍
@furryp2402
3 жыл бұрын
I was nervous about removing that cap on the front head. I wasn't sure what was underneath given it's the cylinder head
@robertgary3561
Жыл бұрын
Rear cam leaks more. Just changed mine. Honda also made that 3.5L for saturn in the Vue.
@carljohnson4996
Жыл бұрын
That’s true same engine that’s in the Honda pilot or any other j35 Honda that crazy I didn’t know that! Thanks for this info!
@EdgarfloresA
6 ай бұрын
Thanks for showing the leaks,I did the filter housing I’ll be doing the cam cover next.
@SilkCityOG
Жыл бұрын
So that's where the leak is! I kept wiping and wiping and couldn't find the leak but would see the oil on top of the transmission! Thanks a lot bro👍🏽
@Mr_BUSINESS_24_7
Ай бұрын
at 300k.... ~ valve adjustment ~ valve cover gaskets ~ lower intake manifold gaskets ~ knock sensor (NTK or Beck Arnley brand) ~ water pipe reseal ~ crossover pipe reseal ~ thermostat replacement (TAMA Brand, gets done every 100k miles) ~ cam cap o-rings ~clean EGR ports ~ clean EGR valve pintle and seat ~replace PCV valve and possibly the hose (Sankei brand Made in Japan) ~ replace IAT (Intake Air Temperature Sensor) will usually have engine oil inside the connector (NTK or Beck Arnley brand) ~ replace spark plugs (NGK iridium) ~ Replace ignition coils (Denso) ~ replace (6) fuel injectors with remanufactured Khein fuel injectors ~ reseal complete upper intake plenum (Apex brand gasket kit) ~ remove throttle body, clean throttle body ~ remove IAC (Idle Air Control) valve from the throttle body and clean IAC with brake clean and toothbrush ~ replace IAC gasket ~ reseal throttle body ~ replace ECT (Engine Coolant Temperature) sensor on crossover pipe ~ consider replacing tiny heater bypass hoses going to transmission cooler and throttle body ~ consider replacing valve seals this is about 12 hours of work but will completely refresh the top half of your high mileage J-series engine.
@louisben4510
Жыл бұрын
Very nice information about the valve cover gasket and other seals minor leaking after not long so I should have known to change brands, and basically every single thing that you said might be leaking is leaking on my Ridgeline, LOL
@Mr_BUSINESS_24_7
Ай бұрын
You forgot to mention the leaky oil pump o-ring gasket and rear main seal
@nahumhernandez7865
4 ай бұрын
@Bundysgarage where is the leak coming from at the start of the video ? Between trans and engine.
@8657lou
3 жыл бұрын
What was the year and model that you replaced the cam shaft thrust plate? Do you have a video for the rear one also?
@carljohnson4996
Жыл бұрын
It’s a j35 engine doesn’t matter if it’s a Acura MDX the parts will still fit because the engines the same I do this all the time when I can’t find parts for my Acura cl I just use the parts off a tl type s of the same year
@midnightfarmer382
Жыл бұрын
Cam plug seals should be replaced when the timing belt is replaced, 7yrs or every 100k miles at the latest, most techs including my self only replace the cam plug seal if there leaking, from my experience they normally start leaking when the 2nd timing belt is due that’s 200k miles.
@SilkCityOG
Жыл бұрын
I never had mine changed. Never knew about it. I changed the EGR valve and seen the oil on the cover but didn't know there was an O ring there. I'm at 298k on my 2000 Accord V6 so at 300k I'll get the timing belt and water pump done along with that O ring 👍🏽
@Mr_BUSINESS_24_7
Ай бұрын
Stone or Ishino brand valve cover gaskets. Made in Japan
@maxe.1204
9 ай бұрын
Hi great video as always, question what brand/model pry tool (looks as a giant pick) you used in the video to pry the cap off with?
@MrRockman890
2 жыл бұрын
what about front main seal? I have a 2011 honda odyssey. Is this a common area for an oil leak?
@IndianaTom
2 жыл бұрын
camshaft seal - I screwed up and didn't use enough oil on the oring and it SHEARED - both of them did. The second time I used a waterproof grease. I think I got it this time.
@elperrocovero
2 жыл бұрын
Is that what he replacing?
@carljohnson4996
Жыл бұрын
@@elperrocoveroyea at the end when he is tapping it and doing all that looks kinda annoying to work on compared to the rest of the stuff he replaced
@pragmaticoptimist46
Жыл бұрын
How often does rear main seal leak on an odyssey? I have a ‘12 with about 175,000 miles. A shop told the rear main seal is leaking, but I’m not sure. There is a thin coating of oil on the transmission and it drips every other day. It’s not transmission fluid…I did confirm that.
@bundysgarage
Жыл бұрын
Not often, especially if you have done oil changes on a regular basis. Have you checked your valve covers?
@pragmaticoptimist46
Жыл бұрын
@@bundysgarage I’ve changed valve cover gasket and a ignition coil seal a couple of years ago.
@pragmaticoptimist46
Жыл бұрын
@@bundysgarage a mechanic friend told me it could be the oil pan gasket, but I haven’t popped the bolts on the oil pan to check. There’s no oil around the oil pan.
@bundysgarage
Жыл бұрын
Check out this video: kzitem.info/news/bejne/sm-Yr2GskZWKf44
@justingotto5871
Жыл бұрын
Where is the link to repair the oil filter housing gaskets I can't find the link you said you posted
@keithm7022
3 жыл бұрын
Any o-rings to replace for a pesky transmission drip?
@BraveHelios
Жыл бұрын
Hi, great video! How can you tell if it is the oil pump that is leaking or the oil filter housing that is leaking? I have a 2007 RL and I can see oil leaking from the oil filter housing area but not 100% sure if it is not really the oil pump that is leaking. Actually... thinking about this a bit and if the oil pump was leaking, wouldn't the timing belt become oil drenched as well whereas, if it were the oil filter housing that was leaking, the timing belt would be dry? I have my timing belt exposed as I am in the midst of changing the timing belt and W/P and it looks bone dry; old but bone dry. So I think that would make me think the leak is from the oil filter housing and not the from the oil pump. Does that make any sense?
@unabonger777
7 ай бұрын
I think it makes sense. I am in the opposite situation. Oil filter plate looks dry but has oil collecting on top edge of the pan near the crank pulley, dripping down to bottom of pan. I suspect it's the oil pump seal but have not removed timing cover to inspect belt.
@jamesguralski5156
Ай бұрын
Awesome thanks 👍
@hadoken4769
Жыл бұрын
Question I got a Honda accord 07 leaking from close to the first top pulley
@sexygranny2240
2 жыл бұрын
Slowly losing oil. No oil on ground. Oil changes every 2 months depends on mileage
@bundysgarage
2 жыл бұрын
What’s the year make and model of your car?
@adsosa2414
Жыл бұрын
Could be burning oil.
@Smedley61
Жыл бұрын
Could this be the VCM thing with the six cylinders?
@havenocat
Жыл бұрын
I have small pools of oil around the mounting bolt inside the upper intake (I hope I'm describing this right - Beneath the ant farm egr cover). Is this normal or is it because of a leak?
@JhonGomz
5 ай бұрын
Hey, what about the other side? Thanks.
@bundysgarage
5 ай бұрын
You can do the other side, it's a little bit of a PITA but it can be done.
@petertirone7078
Ай бұрын
those cam cover o rings are a bitch, order at least 1 extra, it took me two trys to get it to "pop" in just right as it's a tight seal. There is the spool valves and another cam cover plate on the back side of the engine drivers side, also leaks like a sieve.
@martinkoche4375
Жыл бұрын
Thank you sir. Appreciate your help 👍👍
@enelnelson
Жыл бұрын
Great job bud! Very helpful video.
@jayngo23
2 жыл бұрын
I have a 2012 Acura TL. The last guy who did my oil said my car is leaking oil. But whenever I check my ground I don’t see any leaks. Anyway cheap way to fix this ?
@majist0
3 жыл бұрын
Where is the rear cam seal cover?
@vladimirilich4991
7 ай бұрын
tHANKS MY FRIEND.
@kevin2jzzzz203
3 жыл бұрын
If the rear is not leaking do you recomend changing ?
@bundysgarage
3 жыл бұрын
No leave it alone if it’s not leaking.
@kevin2jzzzz203
3 жыл бұрын
@@bundysgarage thanks man
@die-eggocamaney6967
3 жыл бұрын
The nastiest drop is the oil pump.
@glasser2819
2 жыл бұрын
that is for sure! Fix that major leak with the "TIMING BELT" job at 130kMi to save on duplicate labor. Honda OEM T. belts are rock solid, 130kMi interval NO Problem!.
@practicolingo6621
3 жыл бұрын
Hello! Thank you for the video. I click on the link to buy valve cover gasket but Amazon says it doesn't fit my odyssey 2011. Do happen to have an affiliate link for the odyssey. I rather support channels like yours. Let me know. Thanks. Have a great day 👍🚘👨🔧
@bundysgarage
3 жыл бұрын
Thanks for letting me know. As long as you click on the link that I have and your buy something from Amazon I will get the credit cause I directed you there. Thanks for the support!
@maxdiputs2863
3 жыл бұрын
How cheap do you have to be to repair an oil filter? I mean the owner of that vehicle can't spend $5 for a new filter?
@jacobross2895
3 жыл бұрын
Sorry for the tough words, but if you can't spend $5 on a new filter than how do you even afford to keep and maintain a vehicle?
@bundysgarage
2 жыл бұрын
Finally someone who knows that there talking about! If they think I’m fixing an oil filter, I don’t think they should Be working on their own cars. Leave that to professionals!
@shawnwright240
3 жыл бұрын
Okay so I have a 2011 Acura v6 MDX - it is leaking oil and I am going to do all of these. Are they the same on my car? Also- is it possible the so called “Rear main seal” or front one is leaking on my car and not just these ones you pointed out? Thanks for such great help.
@kchardway4629
3 жыл бұрын
Yes it is possible but the rear main seal is a pain in the butt to do. If you’ve done all these and you still get oil from under kinda near the “heart”/ middle of the engine. That could be your problem.
@RadialPen6262
3 жыл бұрын
I've had luck getting at the rear main by "pac manning" the engine and transmission. I just remove all lower bell housing bolts. Before removing them, however I replace the upper 2 or 3 bell housing bolts with long high grade steel bolts. The point of all this is to open the engine and trans from the bottom like a clamshell. You can sometimes get the converter and flywheel out in this way so you can get at the seal. Avoiding complete transmission removal. Any way hope this helps
@bundysgarage
3 жыл бұрын
How do you remove the seal and how do you install it correctly? Sounds very interesting. Also the trans and engine will separate enough to sneak them out?
@RadialPen6262
3 жыл бұрын
@@bundysgarage never replaced rear main seal this way. Only a bad torque converter on an older camry when I worked for Latoya. On that particular model there wasn't room enough to completely separate trans from engine without pulling engine/trans assembly. On bottom the cradle would have been a pain in the butt to manouver around. I just tilted engine trans down on the transmission side and used a screw jack to to tilt the trans back up and snuck the converter out. Book time was like 6 or 7 hours but doing it this way only took 4
@RadialPen6262
3 жыл бұрын
@@bundysgarage Toyota* that was weird Latoya??
@BennyParcher
2 жыл бұрын
So on the side of my valve cover there's a bolt with oil around it. Would that still be an oil tube seal?
@clack185
Жыл бұрын
Probably your bolt grommet
@fatguyfriday
3 жыл бұрын
I have a bad oil leak left corner more towards firewall side. Could the o ring on the cam plug leak major or am I looking at some rear pressure switch?
@bundysgarage
3 жыл бұрын
Driver or Passenger side? Oil leak up high on the engine or down low?
@@bundysgarage no change after replacing the valve cover gasket. I guess it may be more in the middle high because it’s definitely dripping on the exhaust
@jayquinty
3 жыл бұрын
@@fatguyfriday May be your spool valve gasket. It's on the firewall side (rear), right if you're standing in front of the car facing the engine. Look for video by MrRangerz1 (I believe that's his channel). Very straightforward instructions. Make sure you get the dorman gasket set (amazon) because I bought another chinese version and the gasket is thinner and leaked.
@Jimmydafreak
3 жыл бұрын
I just resealed the oil pump on an 2008 MDX with 286k miles. The oil pump seal, water pump and hydraulic tensioner were all leaking and replaced. After reassembly, I have an oil leak dripping from the back lower bolt on the back timing belt cover. Did not notice a leak from the front camshaft seal when I had it apart, but that seems like the only logical point of failure, as the leak originates from above the oil pump. Does this leak sound familiar?
@Jimmydafreak
3 жыл бұрын
Determined that the vehicle had a clogged PCV valve and a collapsed hose. Not sure if that rectified the leak completely, but it definitely mitigated it significantly.
@mrc79
Жыл бұрын
@@Jimmydafreakhow to remedy clogged pcv? Just replace ?
@waholoopesorry74
3 жыл бұрын
I've seen people say that you need to put hondabond on the surfaces before reinstalling otherwise you will get a leak again. What are your thoughts on that?
@Catpanl
2 жыл бұрын
Don’t do it. Leave the o rings as they are. Rubber Seals harden because of infrequent oil changes or poor quality oil. Over time it’s expected.
@glasser2819
2 жыл бұрын
my neighbor uses Hondabond on his spark plugs... LOL. On the oil pan, you have to.
@ganeshnarayan5505
3 жыл бұрын
Great video Bundy, i have 2006 honda odyssey it has 199765 miles i did a leak down test and cylinder #2 exhaust has a leak and cylinder #5 exhaust has a leak. my question is . is it a good idea buying a rebuilt heads form E-bay. i have seen some for $1100.00 dollars.
@StephenBrewer89
3 жыл бұрын
If you can afford down time, and doing the work yourself, for that price you can save money by taking the heads to the machine shop. Have a valve job done and call it good.
@ganeshnarayan5505
3 жыл бұрын
@@StephenBrewer89 thanks that's exactly what I did saved good chunk of money.
@shadowedemotions1287
2 жыл бұрын
I have a 2004 Honda Pilot with @ 289000 miles. I parked and noticed a small amount of oil on the ground. I check my fluids daily and they measure fine. I know I need a oil change will that help the issue? Thanks
@carljohnson4996
Жыл бұрын
Definitely not lol it’s leaking oil slowly overtime you’ll see the difference
@shadowedemotions1287
Жыл бұрын
@@carljohnson4996 So what do I do about it? It's driving me nuts! 😅
@mrc79
11 ай бұрын
Mines completely stuck😢
@reallyhappenings5597
11 ай бұрын
Dude. Are you sublbc? You sound just like him.
@asj12
2 жыл бұрын
2008 accord coupe v6 6mt. 158k No leaks on ground. Can smell oil leaking onto exhaust manifold after long drives. Losing about qt 1000. Gonna try the valve cover gaskets and the thrust seal.
@Catpanl
2 жыл бұрын
Did you check the v tech solenoid seal? That’s where the filter is attached. Any leaks there?
@robb1865
3 жыл бұрын
so of the leak is on the passenger side it's safe to say it's probably the solenoid gasket?
@Catpanl
2 жыл бұрын
Probably a good place to start looking. Clean that area with water hose or degreaser and see if it comes back.
@gr2262
8 ай бұрын
Did u seriously pour oil on the cap and all over your engine bay?!?!? Gotta say, great job pointing out the areas but poor way to show others how to lubricate jaja
@coffeeroaster4747
Жыл бұрын
Too many commercials on KZitem now , I’m going to stop using KZitem
@soniavalenzuela5253
10 ай бұрын
HA!
@BraveHelios
Жыл бұрын
Hi, great video! How can you tell if it is the oil pump that is leaking or the oil filter housing that is leaking? I have a 2007 RL and I can see oil leaking from the oil filter housing area but not 100% sure if it is not really the oil pump that is leaking. Actually... thinking about this a bit and if the oil pump was leaking, wouldn't the timing belt become oil drenched as well whereas, if it were the oil filter housing that was leaking, the timing belt would be dry? I have my timing belt exposed as I am in the midst of changing the timing belt and W/P and it looks bone dry; old but bone dry. So I think that would make me think the leak is from the oil filter housing and not the from the oil pump. Does that make any sense?
@ganeshnarayan5505
3 жыл бұрын
Great video Bundy, I have 2006 honda odyssey it has 199765 miles on it. I did a leak down test and #2 exhaust valve has a leak and #5 exhaust valve has a leak. my question is. is it a good idea buying a rebuild heads form E-bay. I have seen some for $1100.00 dollars.
@bundysgarage
3 жыл бұрын
I can't really speak on that. I have never bought anything off of Ebay and have no experience with it. I have heard horror stories about buying used parts off of ebay. Again I have heard of people finding really good deals. I guess if the seller has a good rating. But I can't tell you yes or no. Why not just have your head rebuilt? most likely is a bad valve. Or do you know the head is cracked?
Пікірлер: 110