Watch this kzitem.info/news/bejne/uIeDuYeEfKyddH4 Amazon: Home printer rex.red/home-printer-all-in-one * Printer Ink rex.red/printer-ink * Printer paper rex.red/printer-paper * Wireless Printer rex.red/inkjet-printers-all-in-one-wireless * Laser printer rex.red/laser-printer-all-in-one * We earn money from qualifying purchases using our affiliate links. As an Amazon Associate I earn from qualifying purchases. Affiliate links are marked with a star. * SHARE this video with your friends + LIKE + Comment + Subscribe to BOTH our channels: rex.red/diro rex.red/rno Thanks to Matt Graham, another tip: When doing this, open the back of the printer so it’s easier.
@aloysscholl6074
5 жыл бұрын
Revised procedure: USE MICROFIBER CLEANING CLOTH WITH GLAS WINDOW CLEANER. 1) Cut microfiber kitchen cleaning cloth into A4 size. 2) On one rub the window cleaner into the area, were the paper feeder role touches the cloth. 3) Put 20 sheets of A4 paper into the paper tray 4) Put the cleaning cloth on one A4 plastic sheet and put it on top of the 20 sheets into the tray 5) Run at least 5 printing jobs (you always have to reset and restart the printing job.) 6) Turn the cloth with A4 paper 180 degree and run one print job for drying the role. 7) Now… your printer should work again !!
@ferencfromhungary6723
3 жыл бұрын
Thanks for the idea. I have used similar double sided tape as in the video, but hasn't risked to let it go through the printer. Instead I cleaned the rollers without turning the printer on. I have attached a piece if tape at the middle of the shorter edge of an A4 paper and moved it a bit back and for in the normal loaded position by hand. It cleaned the rollers gradually. Now my printer feeds perfectly. Thanks again. :-)
@IONHowTo
3 жыл бұрын
@@ferencfromhungary6723 works great like this with a ruler! I might make a video using a ruler. That's safer but might need to repeat it few times.
@smandrew9526
3 жыл бұрын
This guy seems to have a really close and caring relationship with his printer.
@fahmiralfan4033
3 жыл бұрын
Huhuhuhu
@agyepongfranklin
3 жыл бұрын
Lol when you work more with them, you will appreciate printers.
@MoAli72
3 жыл бұрын
Still a better love story than Twilight.
@jeffreygriffith9852
3 жыл бұрын
@@MoAli72 lmao.
@ninafedevilla5905
3 жыл бұрын
HAHAHAHAHAHAAH
@darinfinley
5 жыл бұрын
Thanks for the tip! I was actually able to reach my printer's rollers with a q tip and some alcohol. I wiped them for a couple minutes, let the alcohol dry for about ten minutes, and it started printing just fine!
@squirrel3244
4 жыл бұрын
the alcohol will dry out the rubber on the rollers with time. condition with a" LITTLE" coconut oil and feed a few pages threw to make sure all the access oil is off the rollers
@anomalyp8584
6 ай бұрын
@@squirrel3244 silicon oil i think
@cujoedaman
4 ай бұрын
@@squirrel3244 Denatured alcohol should be ok too, it's not supposed to dry out rubber
@AdamsSIMporium
3 жыл бұрын
EASY METHOD... Few sheets of paper, spray the end with Isopropyl Alcohol, the run roller cleaner (hold stop for 7 flashes). As rollers go, help paper in a bit if need be, but then hold it in place so rollers spin over the alcohol. Do it a couple of times if needs be. Easy, no mess and the cogs don't go mad clicking like crazy.
@beachvalleymedia6801
Жыл бұрын
THANK YOU, Liked and Subscribed, thank you, I used some duck taped taped to a ruler upside down and it worked!!! Got the ruler under the rollers and it got the dirt off.
@arlenebrown2184
5 жыл бұрын
OMG, this really worked!!! I was so frustrated!! If you already are on your last nerve, just fast forward to 4:30 minutes in. First I had a paper jam, then the printer just kept mangling each subsequent page ... DO THIS ... Use one piece of card stock paper and a couple strips of small double-sided tape on the card stock. This is the best part ... LOL ... jam this paper in and out to relieve tension (if you were frustrated like me, haha) and the dirt on the inside roller comes off on the tape and then the roller has traction again!!!!! It literally takes 20 seconds (unless you have a ton of frustration to get out!!!!!) FYI DO NOT put that sticky paper on the floor if you have nosy cats .... yep, mine stepped RIGHT ON IT before entry!! Thank you so much for saving the printer from the trash and me from angina!!!
@tabascopopcorn
4 жыл бұрын
great to see those close-up images of the rollers. thank you!
@akizaizayoi4763
5 жыл бұрын
Thanks man! I didn't try your method since double tape isn't available but it was urgent for me to clean the rollers. With your video, I suddenly got an idea. What I did was: I made the end of a blank paper a little bit wet with water and a bit of alcohol. Just some drops of water on my fingers then spread it on the end. I saw some dirt that the wet end of the paper managed to remove. Then I decided that I should still clean it more, so I put some alcohol on my fingers and slightly wet the ends of another paper. And more dirt removed. The result: feeder roller became more smooth. I don't have to put only one paper one by one whenever I need to print many pages or copies. :)
@Weekndwook92
4 жыл бұрын
It’s 2020 and this still works, had my crappy work one break and then my home printer had THE SAME EXACT ISSUE. Not only was HPs help video worthless, this video saved me from throwing my printers out a window. I used a lint roller sheet and it was perfect. Thank you so much for this!
@MrMick560
5 жыл бұрын
you can make the double sided tape less sticky by repeatedly pressing some material like denim (jeans) on it, or some cloth that doesn't leave bits of fluff.
@ej822co
10 ай бұрын
6 years later and you're still helping people solving this problem. I didn't have double-sided, so used regular scotch tape and taped several pieces together facing up and then taped them down to the paper on the edges with another piece facing down. It took several passes, but now my printer pulls paper in like it should. Thank you!
@IONHowTo
10 ай бұрын
Thanks for watching!
@cathen6759
4 жыл бұрын
Truly a life saver. I had an emergency this morning to print my kids’ test papers. This post solved the problem. Many thanks!
@MrDazFlash
2 жыл бұрын
Great video, just like to add a tip, check for obstruction say for example a pen lid🤣 found a stray one in mine causing havoc couldn’t see until I pulled it apart a bit. But might have come out easily if I had turned it upside down. All good now👍
@IONHowTo
2 жыл бұрын
Great tip!
@_sharleen
6 жыл бұрын
I used my ruler and tape the ruler with a normal tape because I didnt had a double sided tape and cleaned the roller, and it worked. MAY GOD BLESS YOU!
@IONHowTo
6 жыл бұрын
Great idea! Thank you so much! Really helps us to see super positive comments like yours. May God bless you! 🤗
@norfadilahtasya6510
5 жыл бұрын
Its work with ruler!!! Thankyou!!
@chaishiliang9687
5 жыл бұрын
Hi, sharleen Id , Can I know that you did this with printer off or on ?
@TheWasteOspace
4 жыл бұрын
I never write comments...never...but this saved my life. God bless.
@doomsdaydragonsproductions2801
4 жыл бұрын
wait how?
@nickyangel1763
Жыл бұрын
Paper Feed Issue resolved: Canon MX 472 Should work well for other similar printers. This KZitem video made me take the risk below. I was hoping it would work or throw out printer. Previously used Rubber Rejuvenator, alcohol, water. No luck. This worked. I had to junk 2 printers that I got for free before I did this. My Steps: Took basic file folder and cut to 8.5* 11 similar to basic standard printer paper. Took Product: Touch ‘n Stick Spray Construction Adhesive Professional All Purpose Formula that I had in my shop for many years but can still buy doing an Internet search. Sprayed about ¼ from of the top of the cut file folder. Waved in air for about 5 seconds. Pushed the top of sprayed cut file folder into input tray so that it would move the pick-up roller back and forth about 10 times smoothly and fairly quickly. Do not let the folder just sit touching the pickup roller or bottom of area pickup roller sits, keep on moving back and forth and then pull the cut folder out and away from the printer and into the trash. Walked away for ½ hr. Took my paper feed just fine. After a week still working. Feeding paper and printing. This is my first post to KZitem because I share everyone’s pain and expense.
@paula7084
2 жыл бұрын
Update 2022 . Your tip is still working . Just fixed my Pixma paper feed . I am very grateful to you . Thanks again .
@johnnorton9565
6 жыл бұрын
Brilliant ! A simple fix just as the printer was about to go out of the window !!
@IONHowTo
6 жыл бұрын
Enjoy it! 👻
@aloysscholl6074
5 жыл бұрын
Hello, I had the same problem and tried sand-paper.... don't do it !!! I FOND A SOLUTION USIGN MICROFIBER CLEANING CLOTH WITH WATER AND DISH WASHING DETERGENT.. 1) Cut microfiber kitchen cleaning cloth into A4 size. 2) On one side make it wet were were the paper feeder role will touche the cloth. 3) Rub a drop of detergent into the wet area on the cleaning cloth. 4) Put the cleaning cloth on one A4 page and put it into the paper tray of the printer. 5) Run at least 5 printing jobs (you always hav to reset and restart the printing job.) 6) Turn the cloth with A4 paper 180 degree and run one print job for drying the role. 7) Now… your printer should work again !!
@IONHowTo
5 жыл бұрын
No sand paper for sure 😅 If you can remove the rollers, best thing to do is replace the actual rubber on them and they will be like new.
@mauriciomagnani1
5 жыл бұрын
Actually I had good results with a 550 grit sandpaper. Thanks for the tip!
@jamesdurham4778
5 жыл бұрын
Thanks! Cleaning the rollers is the definitely the way to go. I used a metal ruler with double sided sellotape and with the printer turned off I pushed it back and forth under the rollers. With your other hand use a long flat headed screwdriver to hold down the mechanism which holds the rollers (basically like an aircraft undercarriage) to ensure you get a tight fit when you squeeze the ruler between the platform below and the rollers. Worked for me and no risk to printer.
@alvinopedrosaferreira5407
5 жыл бұрын
Yeah, my problem is that my printer's roller has ink on it, which gets in the paper before the actual printing... I'll try your method as it may work in my case!
@ysmn129
3 жыл бұрын
thank you for this!!! i just did mine. metal ruler with tape. printing smoothly now!
@a8a999
2 жыл бұрын
This method works like a charm. Thanks! Of cause thanks to @ION How to who gave us the inspiration.
@mshakthivel1859
6 жыл бұрын
Works 100% fine. Cleaning with double tape won't damage your printer. what I did: take a thin cardboard (cornflakes box) (cauz paper might tear and jam in printer) apply double tape in the end only (horizontally) let it in and out of the paper tray manually (keep printer off) You can see the dirt in the tape. repeat above step until the roller is clean. and your printer is ready to rock and 'roll'. thank you so much for the video.
@IONHowTo
6 жыл бұрын
This sound good too! 👻 Thank you 🙂
@ErikKater
6 жыл бұрын
This worked for me as well, I didn't dare feed the printer automatically with double sided tape on paper and this manual method is totally safe! (The tape i had at hand is very sticky, meant for carpets)
@marekbrandys5607
5 жыл бұрын
It worked :D
@monicahorn1
5 жыл бұрын
Shakthi Vel Thanks soooo much for this tip! Worked like a charm. I've been dealing with this problem for a while and I was ready to toss my printer and get a new one.
@retroflics
3 жыл бұрын
I used a piece of lint roller that I use to collect pet hair. Some rollers have removable sticky layers whichs are less strong than double sided bands. Staple the sticky paper on a sheet and get a hold of it to prevent it to be taken into the printer. It worked for me.
@mikehampshire5242
3 жыл бұрын
About to buy replacement printer found your video ordered Amazon Prime- 24 hour delivery -double side tape 2inch-cut A4 size small box cardboard sheet stuck length of tape sticky side up on the leading edge-to the edge-then with printer off pushed the cleaning board in and out a few times felt like an inch or so,-easy in tougher out then turned printer on with maybe 30 sheets or so in the loader and Bingo no issue the first sheet went straight in! Job done thanks to you,much appreciated well done! Mike
@arpadmohos7772
4 жыл бұрын
The double-sided adhesive tore from the center of the sheet, wrapped around the large transfer roller, so tightly that I couldn’t even cut it. Service does not improve, the solution did not help me. I do not recommend!
@zinesfiery
2 жыл бұрын
Going crazy this morning thinking about wth is wrong with my printer! and finally stumbled into this video. The problem is only one side of the roller is taking the paper. Tried the cardboard and the double-sided tape but to no avail, it still not feeding. Until I checked the inside and lift the feeder until I saw a Crayola crayon inside! lol, So my advice is also to check inside, check everything! wasted my time the whole morning trying to figure out whats wrong! . haha
@daejavue69
3 ай бұрын
Thanks for your comment 😅 did make us smile , very good tip 👍
@Juppie902
4 жыл бұрын
instructions not clear , tape glue too strong and now paper is glued to feeding rollers. How to remove the plastic covers to reach the feeding rollers ? need to manually clean them.
@IONHowTo
4 жыл бұрын
There is a back removable cover on 99% printers, remove it and see. Best is to pull the paper out from the front. Could use rubber safe cleaning pads for the rollers.
Someone suggested pushing through a piece of cardboard, scary. I cleaned it with a qtip right now, got some oily mess and now it's working again. Thank you mate.
@chainsmokersrn3215
2 жыл бұрын
Wow It worked for me thank you so much 😊 . My printer was troubling me for many days finally i searched on KZitem your printer looked similar to my printer so I watched your video 1st . No wasting of time watching other videos😄
@margruber
3 жыл бұрын
Unglaublich !! Das funktioniert zu 100 %. Danke Dragons ION. Thank you.
@khong3222
5 жыл бұрын
works for my E560 !!! thank you so much sir !! but i don't think i will ever get another Canon printer in future
@meh3803
2 жыл бұрын
I love how all of the comments here are as useful as the video. Thank you for ypur tips! I'm having the same issue on my own printer. Hope this video and/or one of the comments here will help me fix my printer 🤞
@victorloureiro144
4 жыл бұрын
Usei uma régua, durex, um cotonete e álcool. Preguei o cotonete na régua com durex e molhei a cabeça do cotonete com álcool. Depois, enfiei a régua pela parte da frente da impressora, até aqueles rolinhos que puxam o papel pra dentro, e consegui limpar a poeira que estava acumulada lá. Depois disso, funcionou perfeitamente :) Thanks for video!
@Nish2.0
3 жыл бұрын
This totally work!!! Paper was stuck in my printer from the back and I was panicking and searching at the same time for a KZitem video that could help me...Then I found you :)
@HansjeVdTillaert
6 жыл бұрын
I wanted to almost throw my printer out of the window until I saw this video. It worked for me. The printer occasionally clicks a bit hard but now he takes the paper. Thanks for sharing.
@IONHowTo
6 жыл бұрын
Great! Another printer saved 👻
@Utamaindra
5 жыл бұрын
Sept, 2019, still workkingg. thanks so much!
@MarkLouisSmit
3 жыл бұрын
The method really works! I used regular one-sided tape, taped down using margins on the sides. I had to pass the paper a few times before it started to work (so probably regular tape is not sticky enough), but after that it correctly fed paper like before.
@dlima36
Жыл бұрын
Thank you so much for this video, I was so focused on trying to reset it and get rid of the error rather than trying to solve the issue at hand. I almost destroyed this printer out of frustration, but this video saved me so much time and gave me such relief. I tried putting the cardboard in and then printing it out and once I did that the cardboard came through and with it included a piece of a sticky note that was jamming it! And afterwards it printed smoothly and perfectly. I cannot express enough gratitude for this video! I have a Canon Inkjet MG2522.
@XxToltecPhantomxX
Жыл бұрын
Yay this actually worked!! I tried another cleaning hack first with isopropyl alcohol on a wipe taped to a piece of card and that didn't work...so I repeated that with this method, double sided tape over a piece of cardboard, and it picked up some hair (I didn't run it through, I pushed it back and forward whilst it was trying to print a test page). It's just a central roller on a Pixma MG4250, I was so skeptical - it works! It's even picking up my thick cardstock by itself, thank you!
@peskypinto
6 жыл бұрын
Just tried the double back tape method & it worked great. I lined up 3/4" strips about 4' long to align with the rollers & ran it through the printer numerous times. After that, I lightly wet the strips and paper along the roller path to help remove remaining dust followed by new, dry paper to remove remaining water, it worked great...printer takes paper perfectly now, thanks for your great suggestion.
@leahb1586
Жыл бұрын
Amazing! Thank you! Used a bit of lint roller paper. Got stuck a little, but came out with a ruler. Great solution that none of the experts suggested.
@edizzle4shizz
8 ай бұрын
Please tell me how you used the lint roller paper....its my last resort. I tried alcohol, scotch tape it fed one time. Then I was back to force feeding with my hand. Thanks in advance.
@kellyjarvis5330
2 жыл бұрын
Thank you so much! I didn't have any double sided tape so did as someone in the comments suggested and used a sheet from my lint roller. I stuck it on to a piece of paper with sticky tape and fed it through the printer just once and it's now working great. Amazing how much dust and fluff came out on the sticky paper!
@josemartinsernavaldeolivar7188
6 ай бұрын
your solution sounds great, I'm gonna try fix my printer with a sheet from my lint roller as you suggest, I'm sure it'll work properly, thanks a lot
@weiqunmi
4 жыл бұрын
Thank you so much for the tip ! Instead of using double-sided tape, I used a sheet from a lint roller. Stuck it to the top of an envelope and pushed it under the rollers a few times. And then it just started working again.
@DgM70
2 жыл бұрын
Thank you so much for this video! We were about to give up and buy another printer! My husband did exactly as you said, with double sided tape, and it worked like a charm!!! Amazing!
@GismoGR
5 жыл бұрын
WORKS 100% Thank you very much,mate. It really works just fine. The printer does not have any issue malfunctioning or something, you just need to be a little careful during the process of inporting the double tape-paper. Thank you again. P.S. Canon Pixma MG3150
@IONHowTo
5 жыл бұрын
Nice 👻
@alexzaretskiy2902
Жыл бұрын
you're the best man, thanks, the printer feeds the paper.🤝🤝🤝🤝🤝
@b.walker5955
Жыл бұрын
Unbeknownst to me at the time, my paper feed actuator arm jumped the printer frame /base when I removed the tray to refill. So when I went to reinsert the tray, something was stopping the paper tray from re-insertion. I got impatient and SHOVED the tray back in. I KNEW I broke everything the crunching noise was horrific. Flipped it upside down and found the arm had in fact over extended and came out too far. I was able to assist it to return to normal up and beyond the base and get it back into position. STILL didn't fix it. After I jabbed the print button again, the Paper continued to jam. Just about to toss it out the window and stick my head in the oven-I watched this video. My method: Took a paper towel, folded and drenched in alcohol (rubbing, not vodka 🤣or scotch). and pulled it under the rollers twice...EUREKA! The results? One sheet, One successful print, and no temper tantrum from this hot head. THANK YOU IONHowTo! XO
@mossmiller
2 жыл бұрын
On my Pixma MG3100, took a brown interoffice mail envelope and placed the sticky tracks from a post it note under where the pickup rollers are located. Used shipping tape to hold the sticky tracks in place. Made two passes of the brown envelope, cut to 8-1/2 x 11" size and it now the pickup rollers work again. Great printer but they should have better access to these rollers. On the HP commercial units they are easily replaceable. Incidentally, HP printers are often made by Canon.
@DougHinVA
3 жыл бұрын
My HP laser printer (ML-1710 model) would not feed paper. So I removed the paper tray and sat the printer on my lap and powered it up. The 2 small rubber wheels that feed paper in turned and I used fine grit *(180-220 grit) paper to press against each roller for 10-15 seconds to take off the glaze that builds up on the small rollers ... Feeds paper OK now.
@nigeljones4290
4 жыл бұрын
OMGoodness...... this technique just pushed out a piece of cardboard half the size of my hand. It was definetly not the uncoloured piece I pushed in as shown and got my TS3160 printing..... how the heck did the coloured carboard get into my printer..no idea ... All good now .. thankyou :)
@rainbowcloset2874
3 жыл бұрын
Thanks for saving my life its already 12am ! 2020 and it's really working!
@zukushishiromulo9019
4 жыл бұрын
Help! i have canon ip2770. when printing, the paper keeps printing on the right side, tendency it gets crumpled. the paper does not align properly.
@sameomeow
4 жыл бұрын
this is happening to my canon g4210
@zukushishiromulo9019
4 жыл бұрын
Shadowolff03 my concern is resolved already. there’s something accidentally stuck in my printer. Just check if something is inside the printer that’s not supposed to be there
@sameomeow
4 жыл бұрын
@@zukushishiromulo9019 I actually just fixed it too, there wasn't something stuck. I just tried to feed in card stock and it wasn't fragile enough to get bent so it fixed my problem
@zukushishiromulo9019
4 жыл бұрын
Shadowolff03 what kind of card?
@sameomeow
4 жыл бұрын
@@zukushishiromulo9019 card stock, harder and thicker paper
@PanyangFernandez2416
2 ай бұрын
I had the same issue today. So I opened my printer and I had to try different things to get the feeder rolling! I folded my bond paper in half, printed til it jammed and pulled the paper out only to realize that there's a CORD WINDER stuck between the last two rollers and we couldn't see it because it's black! 😂😂😂
@davestennes305
3 жыл бұрын
Have an old Pixma IP1600 - this is an old-style top feeder. The right side roller slipping and sheets either don't feed at all go into printer cockeyed and chew up paper. Tried roller cleaning, no luck. About 5 shts of soaking paper with alcohol, still no luck. Light spray of adhesive spray on paper, started getting better, so did about 10 shts of light adhesive spray, each time got a little better. Now all good.
@caroleanngough691
2 жыл бұрын
Workaround....cut A4 sheet from cereal packet...cut 3" square from top edge (middle)..to avoid pickup rollers..place in tray...place paper sheet above..bingo!!
@Freakmeal
4 жыл бұрын
I had a different model, but your video helped me find the catch in the back panel.
@michaelioannidis2013
3 жыл бұрын
I have a similar Canon multifunction printer and am very disappointed. I can hardly read the LCD, wich is not back-lit, inks are very expensive, the firmware is very basic (you cannot know if the printer is connected to Wifi or lost connection, the led is always On), the finally the paper feed problems.
@lorentart
2 жыл бұрын
You are genius man...it´s works!...But i did different, i put some paper (sticker letter paper) and put litle talcum powder to reduce the glue and put off the mashine and then i introduce the paper one and other time, maybe 4 times, for the wheels tuch well the paper and fix the problem! Thank you very much!
@xTHETRINCHOx
3 жыл бұрын
Dude... You sabe my POOR pandemic a$$ !!! ♡(ӦvӦ。)
@miguel-1178
3 жыл бұрын
Nice!, please, remember clean all printer of dust and or do not use old recycled paper, thats is my problem with my printer canon pixma MG6650, i clean with cotton buds and a little water. Perfect!. Greets.
@Czelaya1
4 жыл бұрын
Super helpful but you definitely could have eliminated 50% of this video by just getting to the point...I really didn’t want to watch and listen to your rollers doing the exact same thing that I’ve been watching my printer do for the last 30 minutes.
@valentgarde7025
3 жыл бұрын
This Cannon Pixma is the worst printer I have ever used in every way, buy your double sided tape has fixed the roller problem thank you, I would recommend an HP printer if you want to my quality and reliability though.
@wadniemodwi8661
2 жыл бұрын
I had the same problem with my Canon MF3010. I used a wet cloth to clean the feeder roller and its working after that. Just using finger or dry cloth didnt work.
@OsoOzeki3
Жыл бұрын
Hello, great feedback, I have the same problem and was thinking about disassembly my printer for cleaning, but this could be a huge mistake, thank you for review
@michelleduminie8448
4 жыл бұрын
Thank you! Tired of buying printers every time they don’t work right! We appreciate you!
@juliebourne522
3 жыл бұрын
Can you please help me, I havea Cannon Pixma MX439 printer, scanner copier, fax and the paper feeds in but jams coming out. Help please
@Noaxe_Tegrinde
Жыл бұрын
Thank you very much for that. Very interesting. I might try and 'de-tack' some double sided tape..thanks for the warning. 👍
@noon_fourteen3200
2 жыл бұрын
3:03 ohh🥺 the printer she can’t work without u 😭💔 that so saaaaddddddd .. kidding i try to clean her 🥲🥲🥲🥲 if i can open the printer the cleaning will be easier 🥲🥲🥲🥲🥲🥲
@austus1982
3 жыл бұрын
This video gave me ideas so I appreciate it. I ended up using a pencil, taped a q-tip to it, wrapped tape around the end of the q-tip and ran it across the rollers a few times and that worked for mine!
@markemmer4371
Ай бұрын
A piece of thin brass sheet with a clothes lint roller sheet Scotch-taped over the end worked for me on an Epson ESP-5250. Thanks for the tip.
@furilefurile6087
2 жыл бұрын
My rollers were dried out and looked greyish with small cracks all over. So I tried to feed it very fine sanding paper, that did not work. A shame that these rollers are inaccessible. So what i did was taping a small piece of lead to the left side of the roller assembly with double sided tape.. This can be done from the front with some tools. The lead gives the rollers some more push on the paper so it can grip it better. That did the job.
@Rayshader
4 жыл бұрын
You can try taping only the bottom edge instead, stack 10sheets of paper and manually slip in and out without powering on. Works for my hp.
@andrewwilson4585
4 жыл бұрын
I looked few video but this one gives me the answer for my question @:):)
@Aboabdo-uf3zs
4 жыл бұрын
If there is a solution to the problem of an egg paper stuck inside the printer and cannot see it, how can I see it? The printer Canon MX 475 👍👍👍👍
@wavyks2159
11 ай бұрын
What worked for me is cleaning the rollers with alcohol and then applying a little bit of gel (in this case I used nail product gel, but any gel should work).
@jamaljamal6169
4 жыл бұрын
Man that worked incredibly easy. I was about to throw my printer away and order another one. Thanks.
@vr4051
Жыл бұрын
Hi, this did work on mine. However, I used sticker paper and when it get stucked. I pulled it and got a 5 peso coin haha. Thank you!
@gyamtsoprod2245
3 жыл бұрын
Thanks a lot for your precious help ! I used the double site tape carefuly and it worked very well 👍 Chris from France 🇫🇷
@farahiyahhanimoe6527
Жыл бұрын
so overall the cause of cannot detect the paper is because the dust on feeder roller. i did folllow this method to clean my printer but i am too clumsy that the paper rolled into printing part and got stuck (yeah, with lint roller and some tapes under is). i didnt thought i still need to hold it while its rolling and ended up like that lol but after i read further comments, i think rubbing it with alcohol or use rubbing alcohol is the safest way. it just matter that the dust on roller need to be removed
@cujoedaman
4 ай бұрын
I dabbed my rollers with alcohol on a Q-tip, made sure to dry them off at the end, everything works fine now.
@EnuelZ
2 жыл бұрын
Thank you, I have to used the tape way and still working... like 70%
@martinsaunders9636
4 жыл бұрын
Many thanks for the tip - I was just about to follow your method when I thought of using a vacuum cleaner to clear dust - and this worked!
@depenguin8295
4 жыл бұрын
Wow thanks so much!! You saved us hundreds of dollars with a simple peice of tape. Thanks to you we don’t have to buy a new printer
@bluemush86
Жыл бұрын
Lol printers are funny. I shall try to clean the rollers in similar method but without sticky tape, thanks for sharing.
@saadia4009
3 жыл бұрын
so this video is basically how not to clean printer
@nellhenderson1207
Жыл бұрын
Yesssssss thank you so much it worked my printer is working now thanks to your video I appreciate you so much!!!!
@SlaYeR-nw5bm
Жыл бұрын
Thanks , i can confirm that the ploblem was the dirt on the paper rollers , i've cleaned them and its working.
@nicolasmartin5298
Жыл бұрын
Just used a flat ruller, on which I fixed with an elastic on one end, a computer wipe. I put then some hydroalcoholic gel (for hands cleaning) on the wipe, to have it more wet. Then I placed the wipe juste below the 2 transport wheels, and using the ruller, I forced the wheels upwards. Then I start a print (copy), the transport wheels turn a bit then stop with the "no paper" sound. I click "Ok" on printer, and then several times again, to force the little transport wheels to turn on the wipe, with ruller still in place and pushing the wipe upwards on the wheels. After 5 or 6 times, I felt the little wheels were drawing more onto the wipe and ruller, so I stopped and waited 10 minutes to dry completly. Then I tried with paper sheets, and the transport wheels were working perfectly as new :) ! Thanks for the idea of doing that, I was about to brick that 8 years MX535, but now it is working yet as new :D
@IONHowTo
Жыл бұрын
Great idea! Thanks for watching!
@salimmetin
10 ай бұрын
Instead of double sided tape you can use mini cleaning towels with alcohol, to clean the rubber rolllers.
@darellmorrison
6 жыл бұрын
Make life really easy - open back - take sheet of lint roller - rub sticky side on rollers. Whoola - works
@darellmorrison
6 жыл бұрын
Only worked for few pages so best follow instructions using tape.
@rigolonzinbrin
Жыл бұрын
Maladie habituelle es imprimantes Canon dont beaucoup de personnes se plaignent. Cela s'appelle de l'obsolescence programmée. J'ai eu un cas aussi avec une HP et en fait le prblème était dû à une puce insidieusement placée pour faire tomber la machine en panne au bout d'un certain temps ou nombre de copies... Un ingénieur russe a trouvé un logiciel popur réparer et remettre cette puce -compteuse à zero et mon HP a refonctionné comme par "miracle". Hélas, j'ai perdu le lien du site de ce génial ingénieur.
@bitezumm
6 жыл бұрын
Thanks, this helped me, too! Before this video i did not even imagine to check if the rollers are rolling. Once i figured they are, i took a 30 cm ruler and stuck some wide tape around it, sticky side out, and cleaned the rollers with that, further i wrapped that same ruler in an old tshirt that i moistened up and again cleaned the rollers. Seems to be working at least for now, and so happy i dont have to immediately cash out on a new one.
@IONHowTo
6 жыл бұрын
Nice! Enjoy it! :)
@kennyrosenkrans6100
4 жыл бұрын
I had a paper jam, got the paper out, but now on forms, the lines don't print straight and I have tried doing all the head adjustment and roller cleaning as described in the printer maintenance. Do you have any videos to help figure out how to fix that? I have a Canon MG 3122
@IONHowTo
4 жыл бұрын
No videos but you could try to also remove the cartridges and reinstall them and then do the print head alignment. If still no luck, something is very wrong with it.
@rebarofficial185
10 ай бұрын
I have opened the behind and put the rolls in the Same way its works 😀Ty but without double tape 😀
@teacherazrinah2565
3 жыл бұрын
Hi. Why my pickup roller is not spinning at all after I replaced with the new one?
@tesej-rosecusdjist4404
5 ай бұрын
Thank you very much! I tried a variation of the dubble sided tape: I glued a sheet of sticky notes upside down on a normal paper. The glue on the sticky notes did the job after a few repetitions.
@IONHowTo
5 ай бұрын
Nice work!
@steve6375
3 жыл бұрын
Thanks for the tip. I was worried about getting the rollers stuck, so instead I squirted some isopropyl alcohol on the paper A4 sheet to wet it and then pushed it through but grabbed the top of the sheet so that the rollers just spun on the wet paper. This did the trick and now it picks up OK.
@lazyoldmanathome7699
Жыл бұрын
My similar printer, the Canon MG3650, has a roller self-cleaning mode. Look under maintenance in the software that came with it. However, although this did remove some dirt, I still had the problem. Then I cleaned the rollers by rubbing them with a Q-Tip, taped on the end of a wooden coffee spatula, dipped in some IPA. (Iso-Propyl Alcohol) This worked, until the next time of course.
@MegaHellstrike
3 жыл бұрын
Had to try out the sticky tape idea out of curiosity, never gonna do that again haha! If there's at least any convenience to the Pixma MG3500 it's that the rollers are somewhat easy to reach from the back, after I got the paper with the tape out of the printer again I just wiped them with alcohol which worked a bit better.
@michason
2 жыл бұрын
I had already tried cleaning the feeders on the paper side, then I saw him trying to force the paper through and tried that. When I did a piece of moss popped out from deep inside the feeding mechanism o.0 Solved my problem in less than 5 mins and I didn't even have to watch the whole video ^^
@IONHowTo
2 жыл бұрын
In general, you should watch howto videos without skipping so you don't miss any important information. Great way to get it fixed! Enjoy it!
@soleilcruz9995
2 жыл бұрын
YOU DA REAL MVP 100% Thank You! (Btw I blue painting tape on printer paper and ran it a couple of times top/bottom roller cleaning options, it took awhile before it started actually getting stuck lol)
Пікірлер: 538