Today in this video, we are going to fix the MAX30100 Sensor error and learn to DIY Pulse Oximeter using Arduino. You might have faced no red led light working even after following proper pin connection and program code. or you might have faced “Initializing pulse oximeter…FAILED” or “Initializing… MAX30100 was not found. Please check the wiring/power“. If you see these errors on the serial monitor and want to learn how to fix them, then you are at the right place. So, here we will fix MAX30100 sensor issues and DIY pulse oximeter using an Arduino microcontroller.
***************************************
Get 1-2 Layer PCBs only at $5
www.pcbway.com/?from=theiotpr...
Build Time: Only 24 hour
Gerber File of this project: iotprojectsideas.com/fix-max3...
***************************************
Project Description:
Fix MAX30100 Sensor and DIY Pulse Oximeter using Arduino || MAX30100 Troubleshooting
The pulse oximeter is used for measuring the heart rate and Sp02 level. So, today we will DIY Pulse Oximeter using Arduino, MAX30100 sensor, and 0.96″ SSD1306 OLED Display. To make this project compact, we are using the Arduino Nano microcontroller. But, before getting started with this project, let’s learn more about this MAX30100 pulse oximeter sensor, Its error, and ways to fix them.
***************************************
Fix MAX30100 Sensor & DIY Pulse Oximeter using Arduino
► Project Schematics + Source Code: iotprojectsideas.com/fix-max3...
***************************************
#max30100 #pulseoximeter #arduino #max30100oximeter #heartrate #sp02 #oximitersensor #diypulseoximeter
***************************************
Components Required:
1. Arduino ► amzn.to/3vN4ZHu
2. MAX30100 Oximeter Sensor ► amzn.to/3hdjkt2
3. DHT22 Temperature & Humidity Sensor ► amzn.to/32VEw1X
4. 0.96" I2C OLED Display ► amzn.to/3kvENyc
5. Arduino Nano ► amzn.to/3Hf7zvN
6. Few jumpers wires ► amzn.to/3klh0A4
7. Breadboard ► amzn.to/3H2tbeQ
***************************************
**************Some MAX30100 based Projects**************
► ESP8266 based Patient Health Monitoring System
• ESP8266/ESP32 based Pa...
► ESP32 based MAX30100 Pulse Oximeter Webserver
• ESP32 based MAX30100 P...
► Indoor Air Quality Monitoring with BME680, ESP8266 Webserver, and OLED Display
► • Indoor Air Quality Mon...
► Fingerprint Door Lock System using Arduino and Smartphone
► • Fingerprint Door Lock ...
► ESP8266 based MAX30100 Pulse Oximeter Webserver
► • MAX30100 Pulse Oximete...
►IoT based Temperature Controlled Automatic Fan using ESP8266 & Blynk
► • IoT based Temperature ...
► IoT Based Indoor Air Quality Monitoring Using BME680 and ESP8266
► • IoT Based Indoor Air Q...
********************************************
Chapters:
00:01 Overview: Troubleshooting MAX30100 Pulse Oximeter Sensor
00:53 Channel Intro
01:00 Circuit Assembly & PCB Ordering Online
01:50 Identifying MAX30100 Sensor Error
03:18 Finding Solution
03:31 Method 1
04:01 Method 2
04:18 Circuit Diagram
04:30 Source/Program Code:
05:00 Testing Arduino Based Pulse Oximeter using MAX30100
06:10 Conclusion
***********************
***********************
Follow us on Social Media:
► Facebook: / iotprojectsideas
► Twitter: / theiotprojects2
► Website URL: iotprojectsideas.com
************************
Please Subscribe to this Channel and Never Miss any Future Projects
► Channel Link: / @iotprojectsideas
Thank You for Watching
~-~~-~~~-~~-~
Please watch: "Relay Control with Arduino & DWIN HMI Display"
• Relay Control with Ard...
~-~~-~~~-~~-~
Негізгі бет Ғылым және технология Fix MAX30100 Sensor and DIY Pulse Oximeter using Arduino || MAX30100 Troubleshooting
Пікірлер: 3