Is this Samsung fridge one of the black stainless fridges? Mine has a thin dark film on the stainless and I’m worried pulling the dent could tear the dark wrap. Any input?
@DYNABIKE1
2 жыл бұрын
Why didn't You finish with the mallet and those hard rubber pieces ?? You can smooth out that last ripple there by light tapping the area.
@richardboag8827
2 жыл бұрын
Agreed, that mallet with tips is for tapping down that high spot. Just got a dent puller for my fridge today
@amf9354
2 ай бұрын
Does this work on an lg stainless fridge?
@eddiemac1987
2 жыл бұрын
Did you try this on a black stainless appliance? Was wondering about pulling the finish off.
@dgoulian
2 жыл бұрын
It is a black stainless appliance. Does not hurt finish at all..
@drip_17
8 ай бұрын
How to get the dent out without buying any?
@727ads4
2 жыл бұрын
I totally agree it looks better if you stand back further away from it, just like my ex.🤪😜🤪😜
@seatime674
Жыл бұрын
🤣🤣🤣
@dan5660
10 ай бұрын
LMAO !😁
@stevenc8140
7 ай бұрын
That’s Too funny! Did your ex buy the refrigerator? I thought so….gag!
@Alleycat1921
5 ай бұрын
😂😂😂😂
@melinageofashion
2 жыл бұрын
I think your problem is that super glossy stainless looks an shows all details you did good job just next time don’t buy glossy ones
@monitomic
2 жыл бұрын
Magnet it is for me 🤣
@B__C
Жыл бұрын
I bought the same exact kit for a dent in my fridge. Is there any way to make it as good as knew or will you always be able to see some sort of dent left. My thought is that once the steel is bent, it's either impossible or super difficult to make it perfectly smooth again.
@rando6836
Жыл бұрын
Heat gun maybe. Researching this myself.
@anthonyrojas6303
Жыл бұрын
You can buy a new door but the dent will never come out fully to original form
@testingrighttesting8719
8 ай бұрын
@anthonyrojas6303 I'm here because I got pissed off a couple years ago when I was younger and punched a dent into the fridge. Now I hope I can get ride of it as much as possible
@dontump2286
8 ай бұрын
you could probably use a mixture of the dent remover plus a heat gun to smooth it out after
@PastorIhaza
7 ай бұрын
Thanks... 👍🏾
@MatthewBrandon1
11 ай бұрын
Nice. Hot glue melts with heat so it just hit it with a heat gun to get it off.
@sumairkhan6330
Жыл бұрын
Sir pls tell me why the fridge showing moisture out sides of body , fridge picture -->🖼️ freezer sides out sides sign area please how to solve the problem and reason very humble request in front of you im waiting
@avantoniova
2 жыл бұрын
I have been trying the same on my refrigerator and don’t need to use the scraper. Just let the alcohol work more time and the glue will come off very easily.
@steveee1972
2 жыл бұрын
It work on your refrigerator?
@avantoniova
2 жыл бұрын
@@steveee1972 it is working. I am not sure to keep on trying or not, but it is better now.
@Mike-jh7zh
2 жыл бұрын
That's why they always made fridges in white. You don't really see the dents. Darker colours show up all the scratches and dents and dust. Cars are the same.
@newbiekhyber
9 ай бұрын
Even after this effort, it does not come back to its original form. An easier way would be to just cover the dent with a nice fridge magnet.
@ExacoMvm
Ай бұрын
Or simply buy new door, magnet deco would look odd at the bottom. Or at very least you can also buy the metal part itself, but you would have to disassemble the door and replace it.
@ysi34rt67kii
10 ай бұрын
Hello Rick, You could have returned to Samsung refrigerator dented during transport. Samsung stores promptly accepts replacement.
@dgoulian
9 ай бұрын
Nice to know.
@ryjay1989
2 ай бұрын
Me and my wife purchased a new fridge and within a couple weeks we had a few dents. The kids didnt do it so once again the ghosts in my house is the real problem. How to get rid of ghosts?
@DioSuonatore
Ай бұрын
😂😂😂
@GeneralCliff
2 жыл бұрын
I think it looks better before the "repair" lmao.
@markbirtles7066
Жыл бұрын
It looks crap
@ozzstars_cars
3 ай бұрын
Looks like dookie
@faridjahed
10 ай бұрын
I think heat gun will do a better job
@dgoulian
9 ай бұрын
Sometimes. In my case it didnt.
@seatime674
Жыл бұрын
The ding never fully comes out there's always a little crease. I've always said if you get any kind of ding in stainless steel it's completely done the front's ruined, always new fridge time
@muffinz699
Жыл бұрын
Yeah I mean bc a month after spending $2,000.00 on a refrigerator that has a cosmetic flaw, go spend another $2,000.00 especially if you have children and bills bc who needs to actually eat and we can all spend $2,000.00 every month for a fridge makes sense
@charisma-hornum-fries
5 ай бұрын
That's insanely wasteful.
@DilbiWilber
5 ай бұрын
No doubt a Biden voter.@@charisma-hornum-fries
@Brancaalice
Ай бұрын
Don't buy this kind stainless refrigerator, it worth in kitchen that lot shore to do there. Force the fabricant change for something better.
@justinmassie2235
Жыл бұрын
Praise Be to You Lord Jesus Christ! In Jesus Name i pray! Come Holy Spirit God! Amen ❤️🙏📖
@SilverDog-zl9wm
8 ай бұрын
I tried this kit and did not find it successful. There are no instructions so figuring out which plastic pieces is trial and error. Also the black glue stick kept detecting from the blue connector and the stainless steel fridge surface. I witched to the light colored stick. Adhesion was a little better. However in the end after 10 attempts and no results, I gave up.
@gmtbird677
3 ай бұрын
I had this kit as well and tried it on the lower freezer door of my French door Whirlpool refrigerator. I could not get the glue to adhere the blue plastic piece. I figured it was because the door was too cool for the hot glue to sufficiently adhere. You seem to have had the same issue. What is the "light colored stick" to which you refer?
Пікірлер: 46