Blog post on this solution: bit.ly/36MR6C2 Check out my video on Bobcat Miner 300 Unboxing & How to Setup: kzitem.info/news/bejne/z31p2Z18a4qgY4I Check out MNTD Helium Miners: link.tariosultan.com/mntd (*Use this coupon to get an extra 10% OFF: TARIO) Antenna Upgrade Options: link.tariosultan.com/rakwireless
@chicagoground
3 жыл бұрын
Hello my friend can you please help me out if you can, I followed all steps port forwarded activated DMZ I'm online my inbound has a check mark but outbound has a red X how to fix the outbound?
@chicagoground
3 жыл бұрын
@@ia6980 if you find out let me know please trying to figure this out myself. I heard port one and Dmz the other
@moonrigh2770
3 жыл бұрын
@@ia6980 i have the same exact problem
@czero18
3 жыл бұрын
Excellent video. Ty. Sub'd
@izumitk9210
3 жыл бұрын
why 44158?
@martinmacdonald5773
2 жыл бұрын
My hotspot has been relaying for last few days despite troubleshooting with helium guidance. Then followed steps in this video and it stopped relaying first go! Great explanation now even a pleb like myself can fix it Thank you 🙏
@tariosultan
2 жыл бұрын
Thanks for sharing
@lemmeseeit2
2 жыл бұрын
Phenomenal explanation. I was able to open up the port. Thank you. I will now wait 8-10 hours as you suggested to see if the relayed problem goes away. The only thing that I would add, that was not necessary for the routers you showed, is that some people need to add an external IP address (their router's public IP address) in addition to the local IP address (the helium hotspot) when setting up the port forwarding.
@tariosultan
2 жыл бұрын
Thanks for the info.
@Trefuckor963
2 жыл бұрын
How do i do it if i dont have a IP address of my router
@jeffusmc6205
2 жыл бұрын
I have watched many, many videos on how to fix this, but I was unable to be successful until I followed your video. It may have been the disabling of the UPnP that finally did it for me. Now my port is open and I await the network to recognize it. Thanks again
@tariosultan
2 жыл бұрын
You're welcome! Give it some time, hopefully network will update your miner soon!
@LoveNrgy
2 жыл бұрын
THIS IS THE BEST EXPLANATION I'VE SEEN YET ON THIS ISSUE . YOU HAVE HELPED ME TREMENDOUSLY!!
@tariosultan
2 жыл бұрын
Most welcome! Thanks for the kind words.
@tiith
2 жыл бұрын
Dropping a comment to show some love and appreciation - after following your clear and concise guidelines, I now get the message that my port 44158 is open. Will give Bobcat Miner some hours hopefully the Relayed message will now disappear. Many thanks Tario!!
@digsy23
2 жыл бұрын
I followed the instructions and it worked perfectly. I had to adjust the steps a little based on my specific router but other that that the video was spot on. Thank you!
@tariosultan
2 жыл бұрын
Amazing! Glad it worked for you!
@droneographyfromthegroundu8653
2 жыл бұрын
6 hours later, videos, comments, going into attic, i was able to get it to say Port OPEN! thank you so much for the video!!
@tariosultan
2 жыл бұрын
I’m glad it worked out for you!
@chuck6897
3 жыл бұрын
Hey Tario…thank you for all the clear and concise information, no fluff. Subscribed 🙏
@tariosultan
3 жыл бұрын
Thank you Chuck! Means a lot!
@italodelcol3241
2 жыл бұрын
Going to apply your video on my relayed issue with my Syncrobit Miner Again really appreciate the discord group & your assisstance with this easy step by step video.
@tariosultan
2 жыл бұрын
Any time!
@JoyfullyThrifted
2 жыл бұрын
Ty for this video!! This was the easiest tutorial to follow I have found so far ! I have a relayed bobcat I need to fix through a friends router and was not understanding the process. You made it very easy to follow.
@tariosultan
2 жыл бұрын
So glad to hear that Andrea! Enjoy the mining!
@Mywhtjp
2 жыл бұрын
Same here. Thanx and very clear. It was connected previously on my other satellite dish Internet but I have recently changed to starlink.
@DrewDown
2 жыл бұрын
Dude you are the man!!!!!! I did everything you did and I’m set up with open port 44158!! If you’re reading this. This is the way to handle the relay troubles. Thank you Bratha! I am in great debt to you and I’ll let everyone know to check you out Bratha!
@tariosultan
2 жыл бұрын
Most welcome Andrew! Glad you figured it out!
@leijin4765
2 жыл бұрын
Very detailed instructions! Just finished set up and waiting for changes. Thanks a lot.
@tariosultan
2 жыл бұрын
Most welcome!
@jackirigoni2152
2 жыл бұрын
Thank you! I've been putting off trying to figure this out. I was able to set it up and see that the port is open in Port Checker. Now waiting 8-10 hours to see if that "Relayed" status goes away. Thanks again.
@tariosultan
2 жыл бұрын
Glad I could help!
@blue-ld4eo
2 жыл бұрын
did it work?
@miketran3356
2 жыл бұрын
Love the "second case study", it's easy and straight forward. Thanks for your sharing. BTW, I subscribed your channel
@tariosultan
2 жыл бұрын
Most welcome Mike! Thanks for the feedback!
@BlissfulMusicStudio
3 жыл бұрын
My Bobcat 300 is connected via Ethernet and this isn’t working. Does this only work on WiFi?
@tariosultan
3 жыл бұрын
works for both wifi and ethernet.
@HNTHub
3 жыл бұрын
I already know how, but thank you so much for making this awesome video on how to port forward for 44158. Great job.
@tariosultan
3 жыл бұрын
You’re very welcome!
@McZoo2000
2 жыл бұрын
Thank you!!! Life saver! Do you do TCP and UDP or just TCP in port forwarding?
@tariosultan
2 жыл бұрын
TCP
@Crixus187
3 жыл бұрын
You are a legened for this. Explained so nicely, i managed to sort it all in 5 min. Thank you!
@tariosultan
3 жыл бұрын
Glad it helped!
@tonyhero1628
2 жыл бұрын
Thanx Tario, so nice that You are on this abode and alive :) I really mean it.
@tariosultan
2 жыл бұрын
Thank you Tony! Means a lot and comment like yours keeps me going!
@tonyhero1628
2 жыл бұрын
@@tariosultan Thank You I did a new ping test on Helium Status cos my bobcat was offline status today. It fixed the not synced offline status and see there the relayed sign is gone- all clear. :)
@archillominadze3055
3 жыл бұрын
Great jon indeed! One question, if I am using the ethernet cable should I enter ethernet-MAC instead of WI-FI MAC?
@tariosultan
3 жыл бұрын
Correct.
@joetographer
2 жыл бұрын
Great Video! Extra helpful for those fellow Canadians using the same provider. Thank you
@tariosultan
2 жыл бұрын
Awesome! Glad you found some value!
@johnr9454
2 жыл бұрын
Great video, going to try this with my MNTD miner.
@tariosultan
2 жыл бұрын
Thank you!
@jeckm5471
2 жыл бұрын
You've done a great job showing steps to get rid of relayed status. Thank you!
@tariosultan
2 жыл бұрын
Thanks for watching!
@lucillemorse1005
3 жыл бұрын
Awesome, video!! This helped us so much. I really appreciate the time and effort you put into breaking all this stuff down.💜💜💜
@tariosultan
3 жыл бұрын
You’re very welcome Lucille! It brings joy and fulfilment when I see comments like yours!
@Ronal_d
2 жыл бұрын
Thank you so much for this great video for dummies like me. Did this a few hours ago and I'm reading it can take 48 hours for the relayed issues to go away. lets hope it worked.
@dvancamp6710
2 жыл бұрын
Great video! I was wondering, though, since this is not mentioned in the setup, is this something that should be done for every hotspot during setup or should we wait to see if 'relayed' pops up to address it? Thanks for all of your very well-done videos!
@tariosultan
2 жыл бұрын
It should be done on every hotspot during setup.
@dvancamp6710
2 жыл бұрын
@@tariosultan OK, so now I'm trying. Unfortnately I just found out that my ISP won't allow residential customers to set static IPs or do port forwarding. I'm going to be looking into changing ISPs or trying to hook a second router to this network (not sure if that will work or not).
@tariosultan
2 жыл бұрын
Best of luck! Hopefully get it fixed soon!
@dvancamp6710
2 жыл бұрын
I purchased a Netgear Nighthawk cable modem router and have successfully assigned a static IP and opened port 44158 (checked with Portchecker). My miner, however, is still showing a yellow light (I can ping it locally) and the Helium website shows 'relayed' and syncing. I am not unable to run Diagnostics with the app (shows the miner but then errors out when trying to access it; rebooted many times). I apologize for bothering you here but I am unable to get on Discord to ask any questions (my phone is associated with some phantom account). Any suggestions? BTW, I do have a second, brand-new miner but I was planning to use it in another location. If I were to use it here, would I be able to move either one to another location later and reconfigure it a second time for the new location?
@tariosultan
2 жыл бұрын
Have you tried a power cycle? Unplug it, wait for a few mins then plug it back? You can reinsert location any time you want, the fee is $10.
@ThedDomingo16
2 жыл бұрын
do you have any advice for having "relayed" and "need attention" status?
@tariosultan
2 жыл бұрын
This video is my advice. :)
@bolojow
3 жыл бұрын
Great video - my situation is a bit more complex. I have a base router/modem from the ISP but the signal was weak. So I added two routers in different rooms and then connected the miner. Done port forwarding in the base router/modem from the ISP but the miner still says Hotspot is being relayed. Must I do a port forwarding on each of the two added routers as well and exactly how.
@jacobkimble857
2 жыл бұрын
hey I see you posted this 3 months ago and I am in the same situation as you. If you figured this out can you tell me how because the last 3 days I cant get the relay to go away
@ChiMontana
2 жыл бұрын
Thanks bro I actually found almost everything. The only difference was I had att which was a little confusing but I was able to find everything
@tariosultan
2 жыл бұрын
Glad you sorted it out!
@keruvin2526
3 жыл бұрын
Hi Tario! Great video, was able to open the port, however, my helium still says relayed. Do you know how long should I wait or if there is anything else I should try? Thanks!
@tariosultan
3 жыл бұрын
one of my miners took 8-10hrs, the other one 2hrs, so really depends, I'd say leave it for up to 24 hours to get the update.
@joey9808
2 жыл бұрын
comments are spot on, after tons of videos this one was the best and most helpful, thank you and good luck mining!
@tariosultan
2 жыл бұрын
Thank you Joey! Means a lot!
@janosa82
2 жыл бұрын
Hey Tario, I followed all steps as mentioned in the video. I even disabled the UPnP but I am still getting port is closed when I check at portchecker. Do you have any other suggestion? Could it be the ISP blocking this port? Do I need to request for a static IP from my ISP to solve this issue? Thanks, Jean
@collineisenbarth8220
2 жыл бұрын
Having the same issue
@JamesHayek
2 жыл бұрын
Won’t matter after the 19th
@Заработувајдодекаспиеш
2 жыл бұрын
Hi Jean, I'm facing same problem. Did You solve it?
@janosa82
2 жыл бұрын
@@Заработувајдодекаспиеш yes I requested a static ip from my local operator.
@MattR151
3 жыл бұрын
I have Telus and did the port forward and DHCP reservation but it was still relayed.. Then I disabled the UPnP and rebooted and presto its no longer relayed! Thanks so much!
@tariosultan
3 жыл бұрын
Awesome! Glad you figured it out!
@stormcrow3096
2 жыл бұрын
What a truly amazing guide, thorough and well paced for beginners. Thanks so much.
@tariosultan
2 жыл бұрын
Thank you for the kind words. Means a lot!
@Panther-
3 жыл бұрын
Thank youths was the final video I watched that helped me get rid of the issue, and it went away literally 3 hours after doing what u said thank you.
@tariosultan
3 жыл бұрын
Awesome! Glad I could help!
@NewEdge04GT
3 жыл бұрын
Hi Tario, I was able to get the port open during syncing (when I got the relayed message). I left it overnight and the next morning, the port is closed and I did the same setup but port remains closed. Any thoughts why?
@tariosultan
3 жыл бұрын
Did the relayed status go away at all?
@Kassack
2 жыл бұрын
Best guide which i seen for relayed hnt , thks a lot
@tariosultan
2 жыл бұрын
Thank you!
@RafaelMartinez-in8iz
3 жыл бұрын
Probably one of the best videos regarding this fix, i have tried everything and still no luck, it went off relayed and then after a while back again, could it be the NAT type, as everything else seems correct, and in this case i cannot change it from my settings, should i contact my ISP to open the port for me? thanks again for the amazing video
@tariosultan
3 жыл бұрын
You’re welcome! Glad it’s helpful. I have one miner that had similar issue like yours. The relayed came back after a week or so. Here are a few points you can consider: 1. Firewall security: I set to NAT only. 2. IPv6 Firewall security level: off 3. DMZ hosting enabled and added bobcat miner in the setting. Give them a try. Best of luck!
@SpinatasLT
3 жыл бұрын
@@tariosultan How much time need to wait, after router settings was changed
@littlezeek
3 жыл бұрын
I just follwed all steps still in relay but hands down the best video explaining how.
@tariosultan
3 жыл бұрын
I waited for like 8-10 hours, some times could be less than that.
@tariosultan
3 жыл бұрын
Thank you Jason!
@aditya-garg
2 жыл бұрын
Thanks for the video! I assume if I have AP configured to work with helium and it has DHCP disabled(using main router IP) ,does this setting need to be applied on this AP as well or just the main router?
@michaelbyf4979
3 жыл бұрын
Hi , thanks for the detailed guide! I saw this "For support and firmware updates, we will need ports 22 and 443 open Outbound" How do I do that? Is it the same process as port forwarding?
@tariosultan
3 жыл бұрын
Those two ports should be open by default. Get 44158 open and keep an eye on your miner status.
@dataape8071
2 жыл бұрын
It worked, thanks! Now all I have to do is wait 8-10 hours
@tariosultan
2 жыл бұрын
Glad it worked out!
@anthonyspano3568
3 жыл бұрын
after you complete all these items does the app stay in "relaying"mode for the 8-10 hours before mapping over to the correct mode?
@tariosultan
3 жыл бұрын
It will stay for a bit then clear out. (Usually within 24hours)
@ovangal3852
3 жыл бұрын
This is the best fix for this RELAY problem. U R the best Tario S!!!
@tariosultan
3 жыл бұрын
You're welcome! Glad it's helpful!
@dvancamp6710
2 жыл бұрын
Tario, thank you for all the help you've been! Great videos! I do have a problem I need help with and that is removing one of my miners from my hex. I asserted them both at the same location to allow Bobcat to update the software from 2019 to current. That took over a month! Now, both are online and working but they are impacting each other (transmit scale .43) and I need to remove one of them but have only seen how to re-assert at another location. I don't have another location and just need to "de-assert" one of them! Any suggestions? I would be asking on Discord but my account was mistakenly shutdown and I'm waiting for Discord to re-enable it :-( Thanks so much!
@tariosultan
2 жыл бұрын
Things to consider: 1. move one of the miner to ideal location. 2. connect it to the new location wifi (or ethernet) 3. go to helium app 4. choose the miner, top right corner you'll see a gear icon (⚙️) 5. Update Hotspot 6. Update Location -> Change Location
@kevinbaker2470
2 жыл бұрын
To assert to a new location you're going to need 10.00 USD worth of HNT. First times free, just like crack, but you'll have to pony up to move again
@ryantan2492
3 жыл бұрын
Thanks for the video.. very clear.. i am still having trouble getting the port open even though port forwarding has been set up.. do you have experience with Bell Canada? I heard that we need static ip for forwarding and bell only offers it for business acc…
@tariosultan
3 жыл бұрын
I'm not too familiar with bell since I'm with telus. but you can join helium discord group and pop your question there, someone has the same router carrier will give you a hand.
@grimgetmune
2 жыл бұрын
The port is open but it’s still relayed so you think it matters
@tariosultan
2 жыл бұрын
Patiently wait it out.
@onesourcemedia9479
2 жыл бұрын
Takes 12 to 30 hours from my experience
@digsy23
2 жыл бұрын
Opened my port and it took a little over 24 hours for the status to update
@grimgetmune
2 жыл бұрын
@@digsy23 it’s open now if you have a motem and router open ports on the router admin settings and then port forward the router in your modem settings that is what opened up the port for me
@calinflorin8790
2 жыл бұрын
Thanks a lot! The issue was solved. Nat_type was symetric instead of none, in my case. Great tutorial!
@tariosultan
2 жыл бұрын
Glad it helped!
@itsmikebauer
3 жыл бұрын
Thank you I was sitting waiting for status to change untill I watched ur video I’m gonna go to sleep and check on it in the morning you definitely saved me time I hope it works I’ll get back to ya definitely subscribing
@itsmikebauer
3 жыл бұрын
Just an update I use optimum fiber optic 1000 mbps this actually worked for me thank you so much
@tariosultan
3 жыл бұрын
Glad you sorted it out!
@unpluggedfreedom1
2 жыл бұрын
Man thank you so much for this. My Bobcat miners have relayed issue and your video is super easy to follow thank you so much!
@soothingsoundforyou
3 жыл бұрын
Most helpful and in depth video on how to fix this issue. Thank you.
@tariosultan
3 жыл бұрын
You’re very welcome!
@harlemespanol
2 жыл бұрын
Hey Tario. Great video! Should I configure these settings ISP modem or my TP Link router?
@Tinyman.
2 жыл бұрын
IT BLOODY WORKS! why didnt i just follow the guide before posting my previous comment. outbound and inbound both active. lets see if its the case in a couple hours. fingers crossed.
@oscarsanmiguelgomez
3 жыл бұрын
Still waiting for mine but good to know in advance some troubleshooting. Huge thanks.
@tariosultan
3 жыл бұрын
You’re welcome Oscar!
@coldzeroh1
2 жыл бұрын
tried the port forwarding and DHCP reservation , and when i am checking the the port on checker port , it shows 44158 is still closed . need advice
@delicio
2 жыл бұрын
Thanks for posting this video; it's really informative. I use an AirPort Base Station and am having difficulty configuring port forwarding. Wondering if you have any advice...
@rodrobinson6111
2 жыл бұрын
Thanks for the video. I have a question for u. I have my miner on my Orbi Router. When I did the Diagnostic Report, the IP address was different on the report from the Orbi Router. Is this a problem?
@tariosultan
2 жыл бұрын
You want to go with the IP on diagnostic report.
@ropblu3
2 жыл бұрын
love the video but I just have a question. what is your internet service provider ? or do you have a list of services providers that works good well with the bobcat miner. Thanks
@tariosultan
2 жыл бұрын
All internet providers should work with Bobcat, it's all about you login to your router and do the port forwarding properly.
@ropblu3
2 жыл бұрын
@@tariosultan yeah I don’t think with t mobile lol
@pedromurillo8964
3 жыл бұрын
Hey great video👍 I do have 2 questions. 1st Question is concerning the Firewall DHCP area. So for the Mac address, I noticed you selected WiFi Mac Address. I'm using Ethernet and not the wifi, do I select the Ethernet Mac Address or do I still choose WiFi Mac Address??? Would be greatly appreciated 👌 2nd Question is: Do I wait for my Bobcat 300 to sync first even though its Relayed or do I do it now. I just got my Bobcat yesterday so I was trying to finish the whole process. Thanks so much!!
@tariosultan
3 жыл бұрын
1. Select Ethernet Mac address if you're running it with ethernet. 2. You can do the port forwarding at the setup, don't have to wait for the full sync.
@pedromurillo8964
3 жыл бұрын
Thanks again, really. This video helped me out like you can't imagine. Keep up the awesome work 👏🖖
@tariosultan
3 жыл бұрын
Very glad it's helpful! Thank you for sharing Pedro!
@pparsi
2 жыл бұрын
this video was great, helped me to open the 44158 port in my telus router. great video, thx
@tariosultan
2 жыл бұрын
Most welcome!
@robertwalker3947
3 жыл бұрын
how long before the relayed alert goes away? I followed your instructions and opened the 44158 port. Instructions worked great.
@tariosultan
3 жыл бұрын
Use port checker to see if it's open, if it is, then give it up to 24 hours I'd say.
@paulrussell4697
3 жыл бұрын
I really appreciate this Video I tried firstly without disabling the UPnP but this didn't work but I went back in and after I disabled it, I havent had any issues so far.
@tariosultan
3 жыл бұрын
that's amazing! thanks for sharing Paul!
@thomasfox4835
2 жыл бұрын
Used this aid to sort this issue with my Rak miner I'm the U.K. I have BT WiFi and could make sense of this OK. Thanks
@tariosultan
2 жыл бұрын
Welcome!
@chubritsa9255
3 жыл бұрын
Thank you very much! I just did it and I am hoping that the relayed status would go away soon.
@tariosultan
3 жыл бұрын
Awesome!
@PetePineda
3 жыл бұрын
A very well done instructional video. I am glad I watched. Explained thoroughly.
@tariosultan
3 жыл бұрын
Glad it was helpful!
@simplerecipes1800
3 жыл бұрын
Thanks for the video. One big question for me is.. How would you manage the syncing issue if you are in another country? If you have hotspots away from you. Somebody needs to connect to your helium app? It would be great to manage all completely remote way. Thanks for the suggestions.
@tariosultan
3 жыл бұрын
You setup the miners with the app and you can manage and monitor all miners with 1 app. Now if you want to remotely control the miner, that's a different story, there're some brands out there allow you to do that.
@simplerecipes1800
3 жыл бұрын
@@tariosultan thanks for the feedback Tario, which brand / system do that?
@playerdamian7974
3 жыл бұрын
Very detailed and helped me out a lot. Now all that’s left is the waiting game 😊
@tariosultan
3 жыл бұрын
Glad it helped! Enjoy the mining!
@IanSmithhypnosis
2 жыл бұрын
Hi Tario. Excellent video. I would like to ask a question. After turning on my Helium miner Bobcat 300 it initially paired. using the BT button. I was just about to finish the setup when the red light came on and it's no longer paired. The BT button now does not work. Any advice would be appreciated.
@Gooostavooo
2 жыл бұрын
Still didn’t try - but do far the only truly clearing video I’ve seen
@nikkifryn411
2 жыл бұрын
Thanks for showing this in so much detail and with two different router admin panels. Made it easy to understand and translate to my own router admin panel.
@tariosultan
2 жыл бұрын
Glad it was helpful!
@hrvojelovric963
3 жыл бұрын
how much time is needed to remove relayed status after doing this fix? great video man!
@tariosultan
3 жыл бұрын
A few hours up to a day.
@rigger88
2 жыл бұрын
Great tutorial video, thanks! Can I use a ethernet splitter before plugging-in Bobcat?
@teslapool3165
2 жыл бұрын
Very good easy to understand video tutorial! Keep up the amazing help and videos 🤩🙌🏻👌🏻
@tariosultan
2 жыл бұрын
Thank you!
@diogovitorino2613
3 жыл бұрын
Hey man thank you very much for putting the work to make this video. Helps out a lot. Cheers from Portugal
@darenazzopardi5589
2 жыл бұрын
Thanks Tario. I followed the instructions and it worked for me.
@tariosultan
2 жыл бұрын
Great to hear!
@taahakhann
3 жыл бұрын
Does it cost money to add a static up address? Also does using Ethernet get rid of the relayed status?
@Sebastian-zl6qs
3 жыл бұрын
Thanks for video! I have xfinity and I was able to login to my account online added the port forwarding address and it instantly removed the relay status! Thank again!
@tariosultan
3 жыл бұрын
Amazing! Thanks for sharing!
@khadafi1183
3 жыл бұрын
How did you do it through xfinity?
@davidyewtube
3 жыл бұрын
Thanks for all the great info! Would the port checker show that 44158 is open, when you check on your computer? Is it port open only for the miner that you specified?
@tariosultan
3 жыл бұрын
As long as you did the steps correctly. If it shows open, it means the wifi router 44158 is open which means your miner port is open (because you entered miner IP for port forwarding)
@RJ-je7so
2 жыл бұрын
Your video was great. Have the exact same Telus router and in the video and the 44158 port still shows closed and I’m still relayed, any advice.
@kinanalhassan1790
2 жыл бұрын
Hey bro thx for the great video. I would like to ask you now that I got my new miner, can I do these settings from the beginning before it even starts mining. Or I must wait until it is syncing with the network and then if I get the relayed message then apply those settings?
@tariosultan
2 жыл бұрын
You can do it any time, I usually do it during set up of the miner. There's no rule says you have to do port forwarding before setting up the miner, so you're all good.
@sonnyphammanivanh2121
2 жыл бұрын
Coming back to this video to comment, since this video is what helped most for previous problems. My bobcat has been offline for a few days now. Problem is when I run a diagnosis, the IP address provided from bobcat isn’t working when I am trying to add it into my router for port forwarding. What used to be IP : 192 is now 169… Router is saying that IP is invalid
@tariosultan
2 жыл бұрын
What’s the connection type? Wifi or Ethernet?
@jackfrost7786
2 жыл бұрын
Hey Tario, thanks for the video . Do you have any info on the Finestra Miner? I’m having the same “relayed” issue but on a Finestra miner.
@alexiomilion
2 жыл бұрын
Hey, this video helps very well to remove Relayed status.
@tariosultan
2 жыл бұрын
Thank you Alexio. Much appreciated!
@bryanlipsky5305
3 жыл бұрын
Thanks Tario for a concise video on fixing relayed Helium Hotspots. Already liked and subscribed. 🎈
@tariosultan
3 жыл бұрын
Awesome! Thx for the sub!
@isaiahvasquez8983
3 жыл бұрын
THANK YOU!!! finally got it figured out thanks to this video.
@tariosultan
3 жыл бұрын
You’re welcome!
@Healitnow
3 жыл бұрын
I really would like to do this but was lost at the 4 min mark on the video. Which is the best video set to watch the learn the basics. I have no idea on wallets or mining. This is new but seems profitable.
@tariosultan
3 жыл бұрын
What part you don’t understand?
@MashupKingMusic
3 жыл бұрын
I did my 44158 Port and it’s all good but for some reason my 22 and 443 isn’t enabled so do I create a separate rule with the bobcat just for those ports or how would I do it?
@kadenduncan9519
3 жыл бұрын
Awesome video. If i have it connected using ethernet do i put in the ethernet MAC address? or still use the wifi MAC address? thanks!
@tariosultan
3 жыл бұрын
Ethernet MAC address.
@michaelpayne3058
3 жыл бұрын
Thorough instructions and very informative. Great video!
@tariosultan
3 жыл бұрын
Thank you Michael!
@sumeraghani3014
2 жыл бұрын
Thank you so much. Very details video . I will try and hopefully i do not get any problems with my bobcat 👍🏻
@tariosultan
2 жыл бұрын
Best of luck!
@syncedsatoshi
3 жыл бұрын
Hi. Great video. I had a relayed miner. I have done both configured port and disabled Uphp. Will doing both effect the miner?
@tariosultan
3 жыл бұрын
You can only do one per location. So best to not set two together. Separate them apart.
@syncedsatoshi
3 жыл бұрын
@@tariosultan sorry let me clarify. I have one miner but configured port forwarding and disabled uphp.
@patrickheersche9056
2 жыл бұрын
I did not have any luck until I setup the DHCP and fixed the IP address for the Bobcat, took about 15 hours to cycle through before it stopped relaying. This was after port forwarding.
@jonathanpatterson9979
3 жыл бұрын
Thanks for the info Tario! I watched the video a few times and I was able to get the Green open!! Thanks Again!
@tariosultan
3 жыл бұрын
You’re welcome Jonathan!
@jonathanpatterson9979
3 жыл бұрын
Because I watched your video, I’m up and running perfectly!
@anaselmorabit3062
3 жыл бұрын
thank you for the great video. I just discovered your channel and I subscribed because you have great content. Quick question, Yesterday I set up my device and two hours after I saw that it was relayed. this morning I checked again and it has disappeared. Can this happen or do I still have to do fix it as you show in the video?
@tariosultan
3 жыл бұрын
Did you do the port forwarding or not?
@anaselmorabit3062
3 жыл бұрын
@@tariosultan I did not do anything. Yesterday it showed in the app and the helium explorer that it was relayed and this warning it disappeared from both. Can this happen?
@tariosultan
3 жыл бұрын
Use port checker (link in description) to see if the port is open.
@arthurmkheyan6487
3 жыл бұрын
Helpful video thank you. Every time you diagnose Bobcat miner it gives you different IP address
@tariosultan
3 жыл бұрын
Welcome! Mind gave me same IP when I do diagnose.
@alialibraheemi9566
2 жыл бұрын
What do you do when you follow all steps and the port still says closed?
@lmkiyd
3 жыл бұрын
This just boosted my earning by a lot. Thank you
@tariosultan
3 жыл бұрын
That’s awesome! Glad to hear that!
@lmkiyd
3 жыл бұрын
@@tariosultan actually it did but I still have status of relayed and as well as “Your hotspot has a different listen address than the one listed in the Helium API.” It’s been over 12 hours does it sometimes take over days?
@Irocnrollz
2 жыл бұрын
So I have exhausted pretty much all my options at this point, I even have Bobcat Engineering team "Monitoring" my hotspot . My question is, do you know of any issues that keeps the bobcat from going offline/unsyncing itself ? I have done the 44158 port forwarding, the miner sees 100mbs download and 10mbs upload as its hardwired, its not over heating. It just random unsyncs after 6 - 24hrs of being sync'd. im about to throw this damn thing in the trash lol. Please if you know anything could you share it.
@tariosultan
2 жыл бұрын
Yes, I was gonna make a video about this. I had a bobcat kept sync and unsync for 3 month, never had any earning. The issue could be the RAM size, what worked for me is to switch it to Ethernet connection with ethernet cable. That fixed the issue for me.
@Irocnrollz
2 жыл бұрын
@@tariosultan cool deal. Yea mine is the new upgraded 2gb model (received in on December 5th) and it's hardwired currently. Very weird indeed, thank you for the reply.
@mustachess
2 жыл бұрын
Not sure if you have knowledge or time to make a comment on my issue, but I will ask anyways:). I had to add additional routers (2x linksys Velop) to extend the signal strength and push the wifi out of the house (ethernet is not an option). Then set both port forwarding and static ip on the NAT modem and on the one of the Velop routers. My question is if should I set it only on the main router or on both? After testing with “port checker” port 44158 remains closed and my hotspot related :/
@andreheard5646
2 жыл бұрын
Hi Tario, great video. One question, I attempt to do the Port Forwarding process but my internet provider says that my bobcat miner's IP address is "out of subnet range". What should I do? Thank you.
Пікірлер: 1 М.