I decided to make a fixed Z probe on my DIY CNC. I added Home switches that also work as limit switches. The Zprobe i made of a push button and some 3D printing. In this tutorial I show you how to setup the settings for fixed probe on the DDCS V3.1
00:00 Introduction
01:15 Setup the DDCS V3.1
08:00 Demonstrate the settings.
12:30 Probe the corner G54
15:35 Run the G-code
Негізгі бет Тәжірибелік нұсқаулар және стиль Fixed Z probe position with the DDCS V3.1 offline controller.
Пікірлер: 29