Buy an inexpensive set of monitor adjustment tools here: amzn.to/2u39J1M ANYTHING! you buy on Amazon after clicking that link doesn't raise your prices but gives us a referral tip, thank you!
@jamesdye4603
4 жыл бұрын
This just reminded me that when I was 18 I worked on the assembly line at a small computer company and one of the jobs I had was aligning the picture with one of these tools and putting on the back cover. This was in 1985.
@LyonsArcade
4 жыл бұрын
@@jamesdye4603 Very cool! Did you get 'bit' a little bit from time to time?
@jamesdye4603
4 жыл бұрын
@@LyonsArcade I don't think so, but that was a lifetime ago.
@fuckyomamafuckyosisterfuck6136
4 жыл бұрын
What is you have a pre-update screen adjustment tips? I cant see my sores/highscore!
@nensondubois
4 жыл бұрын
Looks like an asteroid smashed into the board.
@LyonsArcade
4 жыл бұрын
maybe one got out of the CRT somehow!
@gorillaau
4 жыл бұрын
@@LyonsArcade Buffer overflow in the code?
@flyingtrap4169
4 жыл бұрын
The irony
@aaronbrandenburg2441
4 жыл бұрын
@@LyonsArcade lol.
@aaronbrandenburg2441
4 жыл бұрын
@@gorillaau dido lol.
@Siminfrance
4 жыл бұрын
I don't have a clue what's going on, but I love watching those classic repair videos, thanks for sharing :)
@LyonsArcade
4 жыл бұрын
If you keep watching you'll be a PRO at this stuff soon enough :)
@jamesdenney9653
4 жыл бұрын
I've seen this done before, and I've done one myself. Cut out the burnt section, cut a chunk of single-side to replace it, lay out the traces with a sharpie, etch, drill, epoxy it in, bridge the connections with copper braid and solder. It looks ugly as homemade sin, but it doesn't alter the board. Mine really looked bloody awful cuz it was blue fiberglass patched into an old-school brown phenolic board.
@Wizardofgosz
4 жыл бұрын
That's what I was thinking.
@rich1051414
4 жыл бұрын
I take side cutters to the old board, then use protoboard to patch back in what was taken out. Works perfectly fine for old single sided boards, but yeah, it's ugly.
@macfixer01
4 жыл бұрын
Think I would have just cut a small piece of perforated board and attached it over the hole using 5 minute epoxy or RTV silicone. Just for the support and holes to slide components through.
@NipkowDisk
4 жыл бұрын
My cousin was married to the late Jerry Logg, the father of Ed Logg who created Asteroids. I met Ed many years ago-
@LyonsArcade
4 жыл бұрын
Very cool! He made a real classic, what a game!
@daishi5571
4 жыл бұрын
This game came out when I was 8. I use to go to the local arcade all the time (sometimes just to hang out) But I was there so often the owner made me a wooden step stool so I could reach the controls better without being stretched to the max (I have always been short)
@LyonsArcade
4 жыл бұрын
That's really cool, that owner was a cool dude or he really wanted those quarters :)
@dirkkrohn1907
2 жыл бұрын
You may have been 8 when Asteroids came out, but me myself, I was born that year so I'm the same age as the game.
@allnewepisodes2000
4 жыл бұрын
This is incredible, man. Truly incredible. I’m going to college for computer engineering and programming and in the fall I will be learning this kind of stuff. AC and DC circuits and digital electronics, and I can’t wait. This is all so fascinating to me!
@LyonsArcade
4 жыл бұрын
Very cool man, glad you enjoyed it!
@keithnoneya6730
5 ай бұрын
Board is actually fixable. You cut the burned part out and groove the edge. Then make a fiberglass patch the same size, groove the edge then epoxy it in. You can etch the runs in before you epoxy it in, then solder copper patch runs in the breaks where the old an new boards meet. Been there done that. Nice work around repair Joe. Best Wishes n Blessings. Keith Noneya.
@tourstagez101
4 жыл бұрын
Chunk of the board gone and you still get it to work! Dude your genius! Never have worked with electronics but I love watching these videos!
@LyonsArcade
4 жыл бұрын
Thanks tourstagez, we appreciate you checking us out :)
@Michigan_Tactical
4 жыл бұрын
When I do resistors in series like that, I use heat shrink, or keep the leads just long enough to solder to avoid shorting.
@RalonsoF1
4 жыл бұрын
This game fascinates me still as it did when I played it back in 1979 as a kid in Italy! Incredible piece of video game history! Awesome restoration work!! Simply great!! Congrats!
@LyonsArcade
4 жыл бұрын
It's a very well designed game, just the concept of it is great. Thank you for watching Ralonso, we'll see you on the next video!
@CrimFerret
4 жыл бұрын
Part of the reason for the speedup board is that it makes the strategy of getting down to one small asteroid and hunting the small UFO ship unusable. People who could do that could roll the game over on a single quarter which wasn't profitable for the arcades.
@LyonsArcade
4 жыл бұрын
That makes sense!
@1yobrevef
4 жыл бұрын
Could also have been to end your game sooner so as to squeeze more quarters out of you in less time. But I don't really know
@gorillaau
4 жыл бұрын
@@1yobrevef I remember reading an arcade strategy guide on asteroid: The take away, reduce the asteroids down on large one at a time, before moving to the next big one. The smaller asteroid move faster. The high scoring strategy is to reduce the playfield to one large asteroid and the wait for the ufo before picking off the ufo. Speeding up the game means you are less likely to hit the correct target.
@billmarsh1971
4 жыл бұрын
I never played one with this hack/mod. I could put 10 pence in and play for hours. Even handed the game to anyone waiting if I had to be somewhere else. Memories ♥️ Cool vid.
@Foxonian
4 жыл бұрын
I remember that. We used to call it playing "ships" . You could spend hours on one quarter that way.
@lepterfirefall
3 жыл бұрын
Makes you appreciate 2 things. The skill and ingenuity of the original designers and builders of these machines....and the ongoing skill of those who understand it and keep them working. Hats off to you.
@LyonsArcade
3 жыл бұрын
Thanks Peter, we appreciate you watching!
@chrismayer3919
Жыл бұрын
My bud,James just LOVED asteroids! It was never fast enough. But even he would be wondering how much LSD that game was dropping to be super mega ultimate turbo speed!
@rustyrepairs2565
3 жыл бұрын
This is so cool! You've kept a piece of history intact for us old timers to relive our youth. I spent most of my high school years at the local arcade. I actually became good enough at pinball I could play all night on a buck. Cost me a ton to get there though!! Lol
@LyonsArcade
3 жыл бұрын
Very cool man, thank you for watching and see you on the next one Rusty!
@andybaldman
4 жыл бұрын
*There's also a simpler version of the speed hack, which doesn't require a daughterboard. That's an older method, before a better one was found. You can just clip or lift the inputs to the 161 at C5 (pins 3, 4, 5, and 6). (Socketing that chip lets you do either.) Depending on which you lift, you'll get faster or slower play. There are 16 combos, and 5 or 6 of them will give faster play at different speeds, while the others are either slower, or they are too fast and cause the board to hang.*
@phuketmusicscene9008
4 жыл бұрын
Great job, I worked on these type of video games back in the 70’s ! This really takes me back 👌
@LyonsArcade
4 жыл бұрын
Thanks for watching Dale, glad you enjoyed it!
@DarkVoidIII
4 жыл бұрын
I played a lot of arcade video games back when I was younger and these were some that I remember that were out back then, in no particular order: Asteroids, Defender, Space Invaders, Bubble Bobble, Moon Patrol, and countless others I can barely remember! Even in 2020 old video games like this bring back the nostalgia I experienced as a teenager or young adult. :D Thank you very much for making this channel what it is, and please don't worry too much about people trying to correct you or whatever, that is just how people are! Reply to anything replyable if it's not a troll post.
@LyonsArcade
4 жыл бұрын
Thank you for the kind words DarkVoid, I'm glad you found our channel and we'll see you on the next video!
@ian_b
4 жыл бұрын
Maybe it's my age, but the electronics of this period (when I was a young teenager) feels much more miraculous to me.
@LyonsArcade
4 жыл бұрын
Back then most of it was done with hardware, now most of it is done with software. There's a lot of miraculous stuff still going on (just running KZitem is pretty amazing), but it's all software that you can't see, where this hardware stuff is something you can hold and touch, it just looks so impressive.
@ian_b
4 жыл бұрын
@@LyonsArcade Sure, I mean show me or anyone else a smartphone back then and it would've been literally something from science fiction. But maybe the whole point is this stuff was cutting edge then and required all this hardware, it verges on mad scientist stuff when you look in the back of something that played an asteroids game :D And maybe now we're spoiled. Back then the electronics in most homes consisted of just a TV, record player and a transistor radio or two. And thanks for these videos I am much enjoying watching them. I'm just about halfway through where you've found the op amp transimpedance amplifier connected to the DAC outputs :D
4 жыл бұрын
Have my respect. Is not dificult restoring , but today one guy interest ins restauration old pieces like this, is honorable!
4 жыл бұрын
gained a subscriber!
@LyonsArcade
4 жыл бұрын
Thanks for checking us out Colecao, we appreciate you watching!
@blueribb99
4 жыл бұрын
I repaired TV's from the 60's until 2000. We did many repairs like that. I remember the name Wells Gardner too. I'm not sure but I think they also made bowling alley monitors back in the day. We had a contract to do their repairs.
@LyonsArcade
4 жыл бұрын
You're correct Glenn, Wells Gardner made the bowling alley monitors! I didn't realize it until I was operating some games in a bowling alley, and the tech in the back told me about it. Thank you for watching, see you on the next video!
@mmaranta785
3 жыл бұрын
I was a video game tech in the 90’s and most of them used Wells Gardner CRT monitors from Chicago
@anthonypresley5593
Жыл бұрын
I’ve had an asteroids for 20 years and it has ran great, never had a single problem with it.
@sublimationman
4 жыл бұрын
I owned and operated a few of these back in the day. Worked for an old operator and became the lead tech for 15 years before moving on to slot machine repairs. Now I work for myself from home.
@LyonsArcade
4 жыл бұрын
Very cool, you know how it is then, you run into weird stuff!
@sublimationman
4 жыл бұрын
@@LyonsArcade Yup, the worst is working on something that someone else "fixed"...
@gorillaau
4 жыл бұрын
@@sublimationman TV techs have the same lament.
@melanatedprose9134
4 жыл бұрын
Your process makes sense. No need to show every millisecond of "experimentation." Another great video!
@LyonsArcade
4 жыл бұрын
Thanks Melanated prose we appreciate it as always :)
@rsmrsm2000
4 жыл бұрын
Incredible - this machine was one of the foundations of my personality
@LyonsArcade
4 жыл бұрын
It certainly was a great game!
@simondempsey1
4 жыл бұрын
Great video as usual. I can remember playing these machines back in the late 70's in the local arcades in the UK. I've learn't a hell of a lot watching you videos on repairing boards etc. Keep em coming Thanks.
@LyonsArcade
4 жыл бұрын
Thanks Simon I appreciate you watching us! I'll keep 'em coming :)
@diddrumdontdrum
3 жыл бұрын
Loved watching this vid I have a real affection for this particular game. Thanks for bringing back the memories. Still looking forward to a Phoenix, scramble or a Battle Zone repair! I always look forward to your vids.
@justanotherstarwarscollect7577
4 жыл бұрын
WOW! This game brings back so many fond memories. Than you so much for sharing and restoring such a remarkable piece of gaming history.
@LyonsArcade
4 жыл бұрын
Thanks Star Wars Collector, glad you found the video :) See you on the next one!
@naytch2003
2 жыл бұрын
It's over Anakin...I have the high ground!!!!😆
@wildatom669
4 жыл бұрын
Nice video for a rainy Carolina day.
@LyonsArcade
4 жыл бұрын
Thanks Dad we appreciate you watching!
@jackjacke4654
3 жыл бұрын
Its an authentic asteroid board now. An asteroid exploded right there. : )
@LyonsArcade
3 жыл бұрын
Somebody else mentioned that possibility haha
@OneSwitch
4 жыл бұрын
Great job bringing back that mess from the dead. Love the look and sound of Asteroids. Designed to instil panic.
@LyonsArcade
4 жыл бұрын
Yeah, they did a fantastic job designing it.
@TheStuffMade
4 жыл бұрын
Nice repair, good to see it fully working again. I remember playing this some time back in the 80s.
@LyonsArcade
4 жыл бұрын
Thank you for watching, I'm glad we got it up and running :)
@Cheva-Pate
4 жыл бұрын
You bring back a lot of memory, i have like a billion game’s on Asteroids!😁
@LyonsArcade
4 жыл бұрын
This might have been one of the ones you played :)
@Cheva-Pate
4 жыл бұрын
No sir, i live i Sweden! Always wonder about the speed, suddenly the game was faster 😁 the ”feeling” when you control the ship was like driving a small howercraft, a friend had one! Asteroids, Defender, love those games, i diddent have the right age to go to a bar, but pinnball place with the arcademacine and mayby a girl to and the evening was great, it was so easy then!
@gregorychoquette7632
4 жыл бұрын
Keep up the great work joe These games are classics and need to be brought back🤗
@LyonsArcade
4 жыл бұрын
Thanks Gregory, we appreciate the kind words :)
@N7DRONES
4 жыл бұрын
just love vector games, can not be emulated by any means, a TRUE VECTOR CRT is amazing, and I so want one !
@LyonsArcade
4 жыл бұрын
There are a couple guys actually making replacement Color Vector monitor boards now, you still need a used crt but there's a ton of those in old junk t.v.'s.... so the Vectors are going to survive at least for the foreseeable future!
@getyerspn
4 жыл бұрын
agreed..... and I used to think that till I very recently saw a emulation system on a 65" microled tv...no back light and a smaller pixel than the old shadow masks on CRT's will I think make these a damn good replacement for vector CRT's...probably cheaper to fix an old vector monitor at the moment though....but it offers hope for the future of old games... Couple that with the Sinden Light gun that's in development and some damn good emulation systems are in the future... I can't afford a micro led tv/monitor so I'll live with imperfect impersonation for now.
@michaelmcclelland2080
4 жыл бұрын
Normandy is that similar to the old Vextrex? May have spelled that wrong
@N7DRONES
4 жыл бұрын
@@michaelmcclelland2080 yes same tech.
@N7DRONES
4 жыл бұрын
@@LyonsArcade love to see a video on a colour one .
@rickspillane357
2 жыл бұрын
Played this arcade in a local pharmacy back in 1980. Great game and floored by its graphics and sounds. Heck a lot better than my Radio Shack pong game at home! One thing I remember was a dial controller to turn the ship and two buttons for fire and thrust. This console in your video was a different one. Maybe I played a first generation Asteroid console? Anyway, very entertaining how to troubleshoot the technical issues! Can’t wait to watch more of yours!
@itwasnottheboots
Жыл бұрын
I have an Asteroid cocktail table with a similar garbled display issue so I really appreciate watching you troubleshoot this. Hopefully it's the same issue when I get around to working on it.
@trs-80fanclub12
4 жыл бұрын
So when I was little, this was the very game that made me realize what a rich neighbor was. I never new anyone who would have a full size arcade machine in their house. Enter the rich kid in the neighborhood, man did I love playing that game in his house for free!
@LyonsArcade
4 жыл бұрын
It reminds me of that show Silver Spoons :)
@zerobyte802
4 жыл бұрын
@@LyonsArcade - Man, I was SO jealous of Ricky Schroeder. I would've given my eye teeth to have an arcade machine at my house.
@ScottyPinball
4 жыл бұрын
Thanks Joe! My Asteroids is now up and running.
@LyonsArcade
4 жыл бұрын
Very cool, glad to hear it!
@GabrielKleinCH
4 жыл бұрын
It's really impressive how you fixed it! Thank you for sharing your experience. I love when repair manuals are included too. I would have used a raspberry with an emulator (mame) :) but it's a totally different approach.
@LyonsArcade
4 жыл бұрын
I've never Maimed any cabinets LOL Just kidding, the MAME stuff is actually how we fix all ours because it contains all the original rom codes. Whatever gets them going again is fine with me.
@Globeglider
2 жыл бұрын
Thanks for this video. I like how you showed all the mistakes post solution. As that is usually how my repairs go.
@billkeithchannel
Жыл бұрын
I had screwed up my Robotron monitor by moving those beam adjustment tabs. The problem was that they would stick so you try to move one and another would move too. I had got it close using their crosshatch test mode but not back to how it was. So I swapped the monitor with a better one that was the same model. I then put a flat panel in the game I took the replacement from. I had to buy a converter board so I could use the VGA connector on the computer monitor. Since it had a normal on/off button I just kept it on then tied the power to the game so it would fire up when the game was turned on.
@LyonsArcade
Жыл бұрын
Yeah those alignment adjustments aren't bad at all on a black and white, but on a color it's a whole other story, I never converge them on a color monitor because of what you ran into it's almost impossible!
@wiidlbeetle3857
4 жыл бұрын
I LOVE Joe’s videos! Looks like a fun and often frustrating job lol
@LyonsArcade
4 жыл бұрын
That's a good way of putting it :)
@2.88milemushroom7
4 жыл бұрын
Those vector graphics are beautiful. They kinda shimmer like Moon light, luv it.
@LyonsArcade
4 жыл бұрын
Yeah, nothing quite like it!
@naytch2003
3 жыл бұрын
Are you sure Hank done it this way?🤣
@LyonsArcade
3 жыл бұрын
Tell me one more gen, just so's I'll understand....
@Audit-The-Auditors-UK
Ай бұрын
It has an analog synth that generates all the sounds using 4 or 5 oscillator circuits 👍 Great video
@rickpontificates3406
3 жыл бұрын
Noice! Pretty ballsy plugging in that burned chassis. I like your “just plug it in and see what happens” attitude.
@LyonsArcade
3 жыл бұрын
Thank you Rick!
@Columbiastargazer
3 жыл бұрын
we had a saying when blue smoke would come out of servers and boards looked like that "Better Put Some Peanut Butter & Jam In The Case Because It' s Toast!"
@LyonsArcade
3 жыл бұрын
hahaha Thanks BC stargazer....
@Wizardofgosz
4 жыл бұрын
Also, a little shrink on that series 1.5 meg resistor would have been a good idea.
@LyonsArcade
4 жыл бұрын
I think you're right!
@emprsnm9903
4 жыл бұрын
As a personal preference; on the removed and jumpered 3.9 Ohm resister, I'd have run the jumper wire straight between the two points. In the very unlikely case of wire insulation melt, it couldn't short to anything under it. Just an OCD paranoia thing. Pretty good work in the board reconstruction. Fun fact; in the 50's vacuum tube era, passive components were straddled in air between connection points (typically tube sockets, and terminal blocks). So that work is kind of a call back to methods of old, pre-pcb.
@jagc1969
4 жыл бұрын
A very interesting video. Thanks for sharing it. I like to watch how classic arcades are being repaired. It is like magic.
@LyonsArcade
4 жыл бұрын
Thanks for watching Juan, we appreciate it! See you on the next video.....
@128MrRon
Жыл бұрын
Thanks for putting the module back in and trying it out so we can see what happens.It def sped the game play up…
@LyonsArcade
Жыл бұрын
Thank you for watching MrRon!
@jimmyjones6298
2 жыл бұрын
This video finally confirms what I figured out at age 14, which the video repair guy was evasive about, or pretended it was a glitch he'd look into (I knew it, they added the board!) *'The speed up board'* We got so good at the game that when it came time to empty the coins out there weren't many, compared to normally being full. One quarter and we could play all day. We'd operate the buttons and joy stick like a professional piano player. Sometimes I'd collect so many extra ships they'd line the top of the screen and I'd end giving away the game to someone watching because I'd have to go home. Back then I had the idea of letting kids play contests of these games and the best players could operate remote military equipment. Looks like we're not too far off from that being reality. Drones.
@andybaldman
4 жыл бұрын
*Regarding your position issues, in the future, probe the output of the first TL082's after the DACs, with an xy scope. You can get an image there (which you can't do directly from the DAC output, as it's a current signal and not a voltage signal, so you have to go through the first TL082 to get a voltage signal.) If you get a good picture with those two points, you know the issue is downstream from there. Analog issues are common with these.*
@LyonsArcade
4 жыл бұрын
Thanks Andy when I break out the scope i'll check that out!
@ddbrink663
3 жыл бұрын
i put enough quarters in asteriods machines when i was a kid to own several of them. still looks fun
@hydorah
4 жыл бұрын
"Good lord! This thing is on crack!" Thanks for the LOL
@LyonsArcade
4 жыл бұрын
Haha thanks hydorah, we appreciate you watching :)
@Mekazas
Жыл бұрын
What a great job you have! I'd love to work on old arcade games. Have fun!
@ryanmacewen511
4 жыл бұрын
The screen looked dimmer when the speed mod thingy was turned to the right. Mute point now, Cool as hell video! ;) Looks amazing! LCD is so flat compared to CRT. (No pun intended)
@LyonsArcade
4 жыл бұрын
Thanks Ryan, we appreciate you watching.... yes I think that pot was a voltage thing like people have been saying...
@Fangel090
2 жыл бұрын
lol was watching and you said going to tell you the kicker and I already knew the answer lol. nice work.
@Dragonblaster1
4 жыл бұрын
The good old days with mile-wide traces and at most double-layer boards.
@LyonsArcade
4 жыл бұрын
Yeah it's all we work on :)
@gorillaau
4 жыл бұрын
The old days when double sided boards was expensive and cheaper to have multiple jumpers on a single sided board than spring the cash for double sided boards. Good old days? Personally I love being able to get a plated through double sided board with all the bells and whistles for just a few dollars.
@darktechinetwork
4 жыл бұрын
If this type of thing was made today. You'd get no documentation and the company would tell you that you'll need to replace the board or have to send it in
@LyonsArcade
4 жыл бұрын
Definitely.... if you think about modern LED monitors that's how they are, no documentation and they don't want you even opening it :)
@darktechinetwork
4 жыл бұрын
@@LyonsArcade kinda sad how things have changed from being able to fix it yourself to not being able to do a damn thing to it
@pogostix6097
4 жыл бұрын
As someone who's bad at Asteroids, that speed hack seems like a dirty way to swindle kids out of quarters e__e Great repair job! My brother loves tech gore so I sent him the video, he about died at the thumbnail hahaha.
@LyonsArcade
4 жыл бұрын
Very cool Pogostix and I agree with you the absolute ONLY reason they made that hack was to get more quarters quicker!
@Robert-Wilson
3 жыл бұрын
First video game I ever played but not in arcade. My grandfather neighbor son had an ATARI 2600 with this game. Would play it every chance I got. We literally burned out the power supply for his 2600 playing it one weekend. Turns out I can’t play the arcade version do to my vision the way it is. The arcade one being just faint outlines I can’t focus on. Where the 2600 version are solid colors I can see well enough. It great seeing you fixing this stuff. I’ve always been fascinated in electronics. Sadly my eyes prevent me from messing with it anymore but still enjoy seeing stuff fixed.
@robj7481
4 жыл бұрын
When I worked on arcade games, I hated Atari’s power supply with the giant filter cap. What a piece of unreliable garbage that was. Edge board connectors were another big problem. And those XY “quadrascan” monitors with the TO-3 transistors mounted to the metal chassis with lousy mica insulators. Yikes! Hint: if the red LED is lit on the monitor, it means the electron beam has gone static and the beam is blanked to prevent a hole from burning on the phosphor screen in the tube. Also, you can set an oscilloscope to channel 1 = X and channel 2 = Y and watch asteroids play on a scope screen.
@patrickp.1998
4 жыл бұрын
I can hear you smiling, while playing the game ^^
@LyonsArcade
4 жыл бұрын
I'm a positive type of person :)
@alunroberts1439
4 жыл бұрын
I do like the way the bullets shot all the way round space and come back
@LyonsArcade
4 жыл бұрын
Very strong "pew pew" 'ers on those old ships :)
@kevinjbakertribe
2 жыл бұрын
I suspect the speed up board used the start LEDs to run at normal speed when in attract mode, so the game didn't look "too fast" until it had your coins!
@SuperAgentman007
4 жыл бұрын
I have a arcade astroids game and I looked at my deflection board and I got the two big resistors still on mine I also have all the manuals with it and the technical schematics to they came in handy a couple of times when I had to fix it
@LyonsArcade
4 жыл бұрын
Very cool man! If yours is working I probably wouldn't mess with it but if it ever breaks I'd lose those resistors :)
@megaglowz8540
4 жыл бұрын
You could get the vinyl, then trim it to but up against the original. Just a thought. Great video!!!
@megaglowz8540
4 жыл бұрын
@@shawbros Yep. Right now he has black paint.......and????
@adambaker5729
4 жыл бұрын
Great video! And you're local to me! Will definitely have to try stopping by next time i'm down in Rock Hill.
@LyonsArcade
4 жыл бұрын
Come on down, Adam!
@trumpingtonfanhurst694
3 жыл бұрын
There were about 3 months of my childhood where I loved this game more than anything
@ericlizotte1123
4 жыл бұрын
Now that's a nice looking Asteroids! Just don't look inside at that board though lol Anyway nice to see you got this working again!
@LyonsArcade
4 жыл бұрын
Believe it or not, the part of the board that got burnt is the absolute hardest part of any board in the whole game to see :)
@corywagner46
4 жыл бұрын
CW2B-1R500J CW2B1R500J 5905-01-208-6316 Resistor, Fixed, Wire Wound Body Length: 0.560 inches nominal Reliability Indicator: Established Electrical Resistance: 1.500 ohms Vishay Dale Electronics Inc. (91637)
@ryanbarker5217
4 жыл бұрын
all i need now is a repair video on an original upright 'star wars' arcade game and a degree in electronics.
@LyonsArcade
4 жыл бұрын
We will be doing a Star Wars repair video soon, it's broke, it's here, I just have to fix it and film it :) I don't have a degree in electronics, though, ask the commenters below they'll assure you I don't know what I'm doing, HA!
@ryanbarker5217
4 жыл бұрын
@@LyonsArcade lol, you seem to have a handle on things.
@pigknickers2975
4 жыл бұрын
The rich irony of the resistor replacement is not wasted on me. I fix things for a living and it's weird how many times this kind of ironic outcome happens. Once fixed something where a pound coin (I"m in UK) had got in a unit and shorted some main supply line. I removed it and then bought a new fuse that it needed using the very same coin. Always something like this going on - and yes there is a God and we are in his world.
@LyonsArcade
4 жыл бұрын
It does seem that way. I see strange things like that all the time, too perfect to be random in my opinion. If there is a God, he seems to have a very good sense of humor.
@paulrbruce
4 жыл бұрын
Used to get over a MILLION points on this game. You can get points but leaving one slow rock and hunting the little ship. I miss this game. I used to work in arcades.
@LyonsArcade
4 жыл бұрын
I"m going to try that hunting strategy one of these days and see if I can get my points up, thanks :)
@Maxxarcade
4 жыл бұрын
I think those resistors may have been running just a bit warm LOL. That game probably had a nice smell before it went totally out! I don't think I've ever seen one of those burn that bad before.
@LyonsArcade
4 жыл бұрын
Yeah that's about the worst I've seen!
@BeautifulAngelBlossom
4 жыл бұрын
Miss your videos sir hope you been well
@RobertBullock
4 жыл бұрын
At 12:49 you have a long jumper wire in place of that resistor. Protip: desoldering braid is straight, and coppery, and will carry a lot of current. It's a straight shot across those contacts and you don't need to insulate it. Cut the braid, solder it in place, voila...heavy trace created that will carry plenty of current....more than the traces on this board will. Want even more current capacity? Fill the braid with solder. I used to save the used braid bits and use them for trace replacement.
@LyonsArcade
4 жыл бұрын
I've never used that stuff much but I'll have to pick some up, that's a good idea :)
@RobertBullock
4 жыл бұрын
@@LyonsArcade Yup. I used it before I got a desoldering station. But generally, I don't like components of any sort over others unless they are very secure. At least shorten the wire where it can't roam around and rub etc....like the carnie fix did.
@davesherman74
2 жыл бұрын
I can smell that burned board from here!
@LyonsArcade
2 жыл бұрын
Smells like Money!
@RS2000XPACK
3 жыл бұрын
People forget how cool these games play and how additive there are !
@bobmonzo3137
4 жыл бұрын
Saved another classic. Awesome job again
@LyonsArcade
4 жыл бұрын
Thanks Bob, we appreciate it!
@mrhands6949
4 жыл бұрын
Lol That spicy music after he called that guy a moron for tying two cinderblocks onto something that could have been jumped
@LyonsArcade
4 жыл бұрын
Everytime I call somebody something I end up having to do the same thing, LOL
@MattMcIrvin
4 жыл бұрын
Whenever the foreshadowing music plays you know it's going to be good.
@runnerba
3 жыл бұрын
OMG.... I've played this a lot in the 80s.
@LyonsArcade
3 жыл бұрын
This might be the same one you played, did you mess up the monitor!!????!!!1 Thanks for watching Runnerba!
@geofftaylor8913
4 жыл бұрын
The speed up board was a mod used to speed up the game play and the rate it ate quarters in the day. Thought about installing one in our arcade in the 80’s.
@LyonsArcade
4 жыл бұрын
Thanks for the info Geoff!
@gcpowersify
4 жыл бұрын
Great video as always! The pot on that speedup hack looked like it may change the vector brightness of the asteroids. Since it also causes them to blink it would make some sense.
@LyonsArcade
4 жыл бұрын
I'm not sure but it was a pretty cool little hack!
@mp3ste1
4 жыл бұрын
nice to see i used to play this cabinet back in 1982 i always remember the volume being reallly loud and when the little ufos's came it shit the hell out of you
@LyonsArcade
4 жыл бұрын
Yeah the sound on these early games was really simple but it really worked with the gameplay! Space Invaders was another one like that....
@PlumGurly
Жыл бұрын
NMI means "non-maskable interrupt." There are regular interrupts that cause the CPU to run code to service them and then return to where it was. There is a line for those, and those interrupts can be disabled ("masked out") by software. However, most CPUs also have a non-maskable interrupt line. That is for serious trouble with the system and things like that. So that is an extra critical set of interrupts that cannot be turned off. As for how it works here, I have no idea.
@yuwish6320
4 жыл бұрын
I wish you luck on this repair. In the future, if you're worried about bare wires like how those two resistors were soldered in, just use some heat shrink next time.
@LyonsArcade
4 жыл бұрын
Thank you Yu Wish!
@dnbreyen
2 жыл бұрын
Great save Ron!!!
@LyonsArcade
2 жыл бұрын
Thank you Dan!
@pauldzim
2 жыл бұрын
The trails left behind when the images move is because of the long-persistence phosphors used in vector display tubes. It's definitely real and not just in your eyes!
@LyonsArcade
2 жыл бұрын
Thank you pauldzim!
@Stubbies2003
3 жыл бұрын
That pot on the add on board looked like it adjusted the brightness of the game to me. When you did your first adjustment test it looked a hell of a lot nicer/brighter and turning it down made it look like it did prior to testing. Very dim.
@LyonsArcade
3 жыл бұрын
Could have been... thank you for watching!
@djplays324
4 жыл бұрын
I don't know how you repairmen put up with the junk people do to their arcade machines. By the way new subscriber here :). Just watched you fix a joust arcade. Good job
@LyonsArcade
4 жыл бұрын
Thanks for watching David :) Basically we know when we buy them there's going to be issues, lol
@Lumibear.
4 жыл бұрын
Beautiful. I have this game on my Vectrex but this looks sooo different.
@LyonsArcade
4 жыл бұрын
You should see it in person!
@stoneyswolf
3 жыл бұрын
I would have loved the speed hack back when I was a kid and played this game. After you beat it and the score turns over it goes to zero score and your at level one again. It's so slow feeling when your good.
@LyonsArcade
3 жыл бұрын
I wouldn't know about that, haha Thank you for watching Pixelated!
@Skeemaster
4 жыл бұрын
Love it .. fixed another classic =)
@LyonsArcade
4 жыл бұрын
That's what WE DO! Thanks for watching OnefoYo.
@flightofapaullo72
4 жыл бұрын
That move at 39:12 was awesome lol! Great video once again! Happy New Year!
@LyonsArcade
4 жыл бұрын
I meant to do that :)
@flightofapaullo72
4 жыл бұрын
@@LyonsArcade Lol!👍
@rgeller56
3 жыл бұрын
Joe what up long time hope you are good this video pop up on my KZitem class to see your still upright and breathing always your fan RG
@LyonsArcade
3 жыл бұрын
Hey Randy! How you been man? Thanks for watching!
@wilder9777
3 жыл бұрын
good work Joe´s classic
@LyonsArcade
3 жыл бұрын
Thank you Wilder!
@thevintageaudiolife
3 жыл бұрын
Thank you, very interesting and informative, loved your videos! thank you
@LyonsArcade
3 жыл бұрын
Thank you Vintage Audio Life, we appreciate it!
@foreverendeavors6210
3 жыл бұрын
I own an appliance repair company, if appliances came with that much comprehensive information every technician would recommend that appliance to the customer, but instead we get a partial tech sheet with some vague information if we are lucky.
@LyonsArcade
3 жыл бұрын
Yeah it's really a bunch of crap, they don't want you fixing anything, back in the day they'd explain exactly how these things worked down to the resistor! You've probably heard before though, when the Model T car was around they actually gave you a bag of tools with the car when you bought it new so you could fix it.
@jackmehoff1565
4 жыл бұрын
Nice fix
@LyonsArcade
4 жыл бұрын
Thanks again, Tony.
@chetpomeroy1399
4 жыл бұрын
I remember playing those Asteroids arcade games, primarily in the local shopping malls, beginning about 1979-80. I sure had a ton of fun and put *a lot* of quarters in them back then!
@LyonsArcade
4 жыл бұрын
I'll bet they made a fortune for the first year or so!
@TenchiJeff
4 жыл бұрын
I remember when there was an arcade game setup in the middle of the mall for a couple weeks whe I was 5 years old. It was like magic super technology.
Пікірлер: 713