Glad to hear you take a moment to talk about safety. Everyone thinks hydraulics are slow and that they'll have time to get out of the way. But a leaky cylinder is quiet and comes down with great force, so you don't know it's coming until it's too late. I have a relative who was killed working alone on his forklift, and now his baby daughter will grow up without her daddy. Hydraulics are serious business, so always, always, use a safety bar or chain.
@mybrotherdonnie
4 жыл бұрын
I try to be extremely cautious around that kind of stuff knowing that you do not have no control over it
@reginaldzachariah4365
2 жыл бұрын
i guess Im asking the wrong place but does someone know a way to log back into an Instagram account..? I was dumb lost my login password. I love any help you can offer me
@tristanpeter296
2 жыл бұрын
@Reginald Zachariah Instablaster ;)
@reginaldzachariah4365
2 жыл бұрын
@Tristan Peter i really appreciate your reply. I got to the site through google and im waiting for the hacking stuff atm. Seems to take a while so I will reply here later with my results.
@reginaldzachariah4365
2 жыл бұрын
@Tristan Peter it worked and I now got access to my account again. I'm so happy! Thanks so much you saved my ass !
@johnnycotrel7413
2 жыл бұрын
Hi Donnie. i have a chevy 3500 i believe and it has the electric pump lift similar to yours.I just put a new pump unit on it and it lifts it up but when you stop it slowly lowers.Kind of like the cylinder might be letting fluid pass by or basically not holding pressure.Just wondering if you had an idea.Thanks and great video.Glad it was an easy fix
@mybrotherdonnie
2 жыл бұрын
If you put the pump assembly on it I assume it come with new solenoids so it would probably be the cylinder bypassing You could try to make sure if it’s gravity down that you didn’t have a wire putting low-voltage to the solenoid for the down side
@johnnycotrel7413
2 жыл бұрын
@@mybrotherdonnie Hi Donnie.Its power down also,just has the up and down button and you have to use both when lifting or lowering.I believe your right,the cylinder isn't holding.When you get it raised say half way up and you stop you can actually watch it slowly come back down.Thanks for the help i greatly appreciate it.
@SpecialK323
Жыл бұрын
My truck bed works sometimes and sometimes not. If I take my pocket knife and touch it to the solenoids the bed comes down, always have used this trick. But, it’s completely stopped now. Any suggestions please.
@mybrotherdonnie
Жыл бұрын
Check and see if you get power back there
@carlosbanegas45
2 ай бұрын
When you say you put a screwdriver and jumped across the two terminals to get bed down? 4:31 Can you explain how you did that?
@mybrotherdonnie
2 ай бұрын
Jump across the terminal use the metal screwdriver handle as the fuse
@davidshugars3178
Жыл бұрын
I can’t wait to get that nice blue 150 in the back ground . We buy all the old equipment
@mybrotherdonnie
Жыл бұрын
.
@franciscoquinonez1602
2 жыл бұрын
Bro am having same issue but I have full power pressure I installed a new pump thinking it was bad the system goes up but it won’t come down it’s sounds like there’s something inside the piston wont let it come down
@mybrotherdonnie
2 жыл бұрын
There’s a little Pressure release that does not have power on it
@Athefleetmechanic
4 ай бұрын
Brightview, Me and someone else control all their fleets In the Bay Area and All around. 5 Branchea in Total, not to mention they fired me after they bought the company I was working for.
@mybrotherdonnie
4 ай бұрын
Good company
@Athefleetmechanic
3 ай бұрын
Good company but not the best management, Branch manager yelled In my face told me "To do my job right or start looking for a new job" Theres a reason why my fleet of 15 groups over 40 vehicles of all medium duty trucks wood chippers and a bunch of equipment was running for the last 5 years I was there with my one mechanic. I did my job right but sometimes short people feel the need to talk to people stupid.
@heatzz-fw8hg
2 ай бұрын
My transit tipper is going up but not down we’re can I find the solenoid to try this to get it down
@mybrotherdonnie
2 ай бұрын
Solenoid is usually strapped on the top of the starter
@mybrotherdonnie
2 ай бұрын
Just about all of those dump beds and tailgate lifts all them use regular starters as the motor 90% of the time they’ve got a hose clamp on them and get them tied to the actual starter themselves
@nickh9632
3 ай бұрын
I have same hoist on my 450, the pump just died and won’t raise. It came down fine but won’t raise. How can I lift the bed to replace the pump without removing the bed?
@mybrotherdonnie
3 ай бұрын
Take both of the hoses off and pull it up
@nickh9632
3 ай бұрын
I should have known better lol, undid the lines and the tractor lifted it right up. Thank you man. Pump has been replaced
@ChakaLove
3 жыл бұрын
Mines was having the same problem so yesterday I went and bought a new fuse put it on and it started working ... this morning I go and check and it’s not working anymore... any idea on what it can be???
@mybrotherdonnie
3 жыл бұрын
Go to the other end of the powerline on the pump and make sure it is tight make sure the pump also has a good ground there’s gonna be three little wires on (solenoid) or block on what looks to be a starter motor if it’s just clicking a lot of times the The little wires are bad or do not have a good connection but make sure that pump in the back has a good ground and a good hot wire going to it
@ChakaLove
3 жыл бұрын
@@mybrotherdonnie thank you I finally fixed it had a bad wire connection
@CristinaDelgado-ff5pe
Жыл бұрын
where did you get it
@mybrotherdonnie
Жыл бұрын
Napa
@fanningconstruction2050
2 жыл бұрын
Absolutely use the safety stop every time, and wedge 6x6 wood blocks on each side please.. just had a bed blow a line, and it was in the air. Not fun.
@mybrotherdonnie
2 жыл бұрын
Yep No reason to get hurt it only takes a few seconds
@fanningconstruction2050
2 жыл бұрын
@@mybrotherdonnie I'm glad I was able to react fast and back off and just held lower while the bed was lowering. Blew its line right after it dumped the load.
@josmarthetreeguy4966
Жыл бұрын
I need your help brother my dump just go’s up but not down I press the button it go’s down but then goes up again but it self what can I do any idea
@mybrotherdonnie
Жыл бұрын
You’ve got power on the up solenoid you need to look and see where the powers coming from it’s probably your button
@josmarthetreeguy4966
Жыл бұрын
@@mybrotherdonnie yes I think it was the button I took the wire off to cut the power off and then I put it back on again and it worked out 💪 thank you brother for answered right away to me I really appreciate it thanks and have a great weekend
@CristinaDelgado-ff5pe
Жыл бұрын
what fuse it
@mybrotherdonnie
Жыл бұрын
Hundred amp
@arealmaintenanceandrepairl1103
Жыл бұрын
on my ddump trailer seems to over extend and when i call it to lower it doesnt when i leave the driveway the back will slide on the cement then i can lower it seems to get wedged out idk why
@mybrotherdonnie
Жыл бұрын
Some of them do not have power down so if the backside of the trailer is waited heavier than the front it will not come down so say you back down a hill and dump it makes it a lot harder for it to come down because it’s just gravity pulling it down and pushing the fluid out of the cylinder if you don’t hear it whining you got a gravity down system
@arealmaintenanceandrepairl1103
Жыл бұрын
@@mybrotherdonnie yeah its gravity down so its past its leverage makes sense
@cdldriver94
2 жыл бұрын
I need you help sir
@mybrotherdonnie
2 жыл бұрын
What do you need
@richardarant428
2 жыл бұрын
My pump works going up but not going down bed is stuck in up position how can I get it down
Пікірлер: 52