I can't thank you enough for this. The amount of time I lost trying to fix this issue is crazy. This finally sorted it out and everything works perfectly again.
@kurtandrew03
2 жыл бұрын
It worked!!! Thank you so much for sharing the additional driver to help fix this problem. I'm using Windows 11. Yes, I was kind of worried about the download link for the USB audio driver not coming from the Behringer website, but I was more desperate to make my UCA222 work. So, I checked with another video just to confirm the file type to download and created a RESTORE Point just in case anything goes wrong and scanned the files twice while zipped and unzipped just to be sure. Then proceeded to install.
@PossibilityFilmsCanada
5 жыл бұрын
This is fantastic! Thank you so much. I've been struggling for months to figure out why I was not recording full stereo through my Behringer UFO202 and installing this older driver records clear, stereo sound now. Had to find a different site to download the driver, though; watch out for the ads and just click on the zip file name "BEHRINGER_2902_X64_2.8.40.zip" (download.driverguide.com/driver/BEHRINGER+USB+AUDIO+2.8.40/Behringer/d1689351.html)
@averageguyjo
4 жыл бұрын
Thanks for the link, it perfectly worked !
@joeschmoe6802
5 жыл бұрын
I clicked on the link for drivers.informer, where he said that the driver should be, but I found no way to download it. Can someone please clarify how to download it from this site?
@scottbailey1560
2 жыл бұрын
The link for the driver as of June 2022 is no good. I have a Behringer UCA-202 and it's not working for me with Windows 10. I need to find something more up-to-date to replace my Behringer UCA-202. I think Behringer is outside the United States. They sell alot of gear in the United States. I'm not sure how to get support for Behringer Products. If anybody knows if Behringer makes a device to replace the UCA-202, I need to know.
@TheZeroPhase
2 жыл бұрын
Did you find it? also looking something as this but that could work with new windows 10 update
@soulstealer29a
4 жыл бұрын
The link doesn't appear to actually lead to any drivers now.
@carolewheeler7667
2 жыл бұрын
Download link address is no longer valid. Could you email me the 2.8.40 version for WinXP (non 64bit) please? Thank you.
@movingsandsmusic1251
Жыл бұрын
Hello, I have the same problem as you with my UCA202, but unfortunately the driver is no longer available at that link. Does anyone have a reliable copy of this driver I could have please?
@charlesross2699
Жыл бұрын
The download has to be hunted elsewhere but it's still in some driver sites. The installer failed for me, but I went into Windows Device manger and found the driver under Other USB devices, and using Windows Driver update feature and selecting the local download folder were the behringer installer had run and failed from , it was installed.
@leonicoletti5946
3 жыл бұрын
Hi...now are no links for dowload in that page. Can you please help me to find that driver? Thanks a lot
@averageguyjo
4 жыл бұрын
Thank you Tim, i was about to throw it away. It's working perfectly now.
@johnstudiob2481
6 жыл бұрын
Hi followed your link but all drivers were greyed out can't seem to download
@tz8785
6 жыл бұрын
There is no list of links, you need to select the proper OS in the dropdown list.
@PaulRentz
5 жыл бұрын
I couldn't find the driver through the links but realized that I had that old driver on my old computer and it worked great.
@tenpoundsterlingtn7756
5 жыл бұрын
please upload this data.
@PaulRentz
5 жыл бұрын
@@tenpoundsterlingtn7756 The driver works fine that I have. I can email it to someone that needs it.
@tenpoundsterlingtn7756
5 жыл бұрын
@@PaulRentz I found it on mediafire. im definitely keeping this backedup
@Sojahsey1
6 жыл бұрын
A perfect fix. Wish I watched this video 3 hours ago.
@TooSlowTube
5 жыл бұрын
Sadly, there appears to be no way to download it from the linked page. Getting a driver from someone other than the manufacturer, seems incredibly risky, these days. Did Behringer replace it with a newer driver version, or just drop it all together?
@StevieMc23
4 жыл бұрын
If your having issues finding the driver its here, one in video info no longer works. workupload.com/file/7DeLMTz
@BenedictFargus
4 жыл бұрын
you are a saint
@backpackadventures8473
4 жыл бұрын
What a joke. Behringer should be on top of this
@LukaS-iy1gs
3 жыл бұрын
Thanks man! Really appreciate it!
@madgermadger330
3 жыл бұрын
Do you know if this driver will work with the ufo 202?
@peterjankowski3592
Жыл бұрын
Thanks so much. This just made my day. I've been struggling with this issue for so long. Working perfectly now :)
@wocket42
4 жыл бұрын
2020 update: I think a different driver is needed. "microphone" is fine as long as you change the window recording device setting from mono 16Khz to stereo 44.1 or 48 Khz. Please check, change and it's fine with the default driver.
@Mantees2
3 жыл бұрын
Thank you. This works fine, without the need to download drivers from unknown sources
@langeredward
6 жыл бұрын
I am using Audacity to record from an old tape drive through the UCA 202 and into a USB port. I am using the USB Audio CODEC microphone device driver that was automatically installed (or selected) when the UCA 202 was first plugged in. The levels and sound quality seem fine, so what would the advantage be to installing the driver you suggest? Thanks.
@nickcorston5422
4 жыл бұрын
Hthere. I'm having 2020 problems and on a deadline. Can you buy some advice/help from you?
@holgerweiland191
5 жыл бұрын
I had the problem, that I only could record a mono signal with the Mikrophone USB input. I find out that you have to change it manually to 2 channel 44,1 khz input. You find this item in properties tab of the mic adjustment. Before it was: 1 ch 16 khz. Change it! Maybe a message appears, that this process is busy. In this case you habe to deactivate the analog mic of the PC Soundcart. Than you are able to save the preset, mentioned above. Also look at the gain of the mic, in some cases it is at100%. That ist to much. Correct ist about 50%. Now i have a nice clean sound with this adjustment that look like „wrong“.
@jakeknox4341
5 жыл бұрын
what do you do specifically to deactivate the analog mic of the PC soundcard? I have the same problem, I cannot change the interface channel settings from 1 to 2 because i always receive the error message device is in use.
@djjohnnym4091
Жыл бұрын
Wheres the download link
@woodiwood7918
4 жыл бұрын
hi, i'm so glad i found your video. have already spent a lot of time in vain. now it finally works. many many thanks. have a good time. with a greeting, matze
@normannielsen6956
5 жыл бұрын
Thank you for your clear video on the UCA222. My system also could only recognize the microphone input until I installed the driver as you detailed. However, I still get extreme clipping when recording to Cool Edit 2000. (I know, it's old, but it does a fantastic job restoring old vinyl). I have used an Xtel INport up to this time, which has worked very well, but I thought a newer AD converter might be better. The clipping occurs at ALL settings of the volume control, just at a lower recorded level. I suppose I could try to potentiometer the level down when feeding the UCA222 but that seems wrong. If you, or anyone, has an idea, I would sure appreciate being made smarter. Thanks
@philmaness5983
6 жыл бұрын
When I added the UCA202 to my new Windows 10 laptop, the master volume was being bypassed. I tried the latest ASIO driver to no avail. I followed the recommendation here, going back to the 2.8.4 driver, now it works fine. I did have to unpack it before the install was successful, it would not install from the compressed folder.
@richardreid5479
Жыл бұрын
Hi Phil, can you talk me through how to unpack & install please. I can't seem to be able to do it for some reason.
@philmaness5983
Жыл бұрын
Sorry, that was so long ago. I think I just unzipped to a directory and ran the setup. I don't have that computer anymore. I now use it with a Macbook. No volume control on the Mac either. I'm feeding an old 2.1 system with SPDIF, so I just have the unit under my desk (sitting on the Sub) where I can reach the volume control.
@nickkeir8153
6 жыл бұрын
Lifesaver, Tim. Thanks!
@kondumer
3 жыл бұрын
No need to setup a new driver for me. System recognised the soundcard line-in as a 1 channel microphone. I changed advanced microphone settings from (default) 1 channel to 2 channel stereo. And problem solved, now i can get stereo recordings. settings>system>sound>input(microphone) device properties>additional device properties>advanced>default format
@retnicolae5527
3 жыл бұрын
My dude, thank you! This is why my setup wasn't picking anything up!
@abramsonrl
5 жыл бұрын
Link removed from site.
@hilow139
6 жыл бұрын
Thank you so much, sir
@muxerbaker4638
4 жыл бұрын
Thanks so much for this!! Why the hell haven't they included the driver in the files page on their website? Only for you I'd be sending this back. I have a direct link to the driver on behringers site, but I'll post it in a separate comment in case it gets removed.
@bollywoodshorts424
4 жыл бұрын
hello anybody have drivers ?
@Nieuwsitems
6 жыл бұрын
Error: Timeout - 0x0005
@turohabaneero
6 жыл бұрын
Did you find a fix?
@Deniz_1637
6 жыл бұрын
i need it too
@MrMintMouse
6 жыл бұрын
Me three. anyone got past this?
@Deniz_1637
6 жыл бұрын
Mr Mint. i just bought a focusrite scarlett 2i2 hardly recommend
@TheRyanator36910
3 жыл бұрын
man still nothing...?
@LS17EAGLE
5 жыл бұрын
Cheers mate
@snakemeatvgm
6 жыл бұрын
Worked for me, Windows 7
@johnstudiob2481
6 жыл бұрын
Hi google and found driver here behringer-usb-audio-2-8-40.drivers.informer.com/download/15810 thanks so much been driving me crazy
Пікірлер: 57