I've just come in from fixing the bottom of mine as the person who had it before hadn't under the screw and broke all the plastics. Made four rubber washers 5mm hole and clampy clampy fix worked! I love the fact here you used a proper clip and the fact and you wanted it to be exactly central. Def one for my list of things to do now. Much easier than what I'df come up with! Thumb. And yes, useful.
@DriveWithAndy
3 жыл бұрын
Thanks man appreciate it and thought be good to share my idea so glad it's of help 😊
@maxdavies9958
3 жыл бұрын
Actually very useful, same exact thing I noticed with mine, might give this a go at the weekend 👍
@DriveWithAndy
3 жыл бұрын
That's cool so easy for such a little thing to do but does make a difference
@maxdavies9958
3 жыл бұрын
@@DriveWithAndy Definately, thanks for the idea haha.
@Robstacey82
3 жыл бұрын
Mine was the same. I did the same but used nuts and bolts on all three clips. Mine also had broken clips under the bumper so used some metal L shape brackets and it’s looking as go as new.
@DriveWithAndy
3 жыл бұрын
Yeh I think once my front bumper is resprayed I may do the two sides the same to make it as tight as possible
@craigirelandjade
3 жыл бұрын
Mine is the same and was wondering the best way to sort it out thanks for the video I'm going to give that a try 👍👍
@DriveWithAndy
3 жыл бұрын
That's great, hoped it would help 👍
@fanatbmx
3 жыл бұрын
Will do same fix for mine. Thank you
@DriveWithAndy
3 жыл бұрын
:) such an easy thing to do, thanks for the comment
@domkelly1972
2 жыл бұрын
There are also tabs on the bottom that you can add material to and clamp in place.
@DriveWithAndy
2 жыл бұрын
i thinkk ive heard that there should be clips. The bodyshop that smoothed the front bumper said this but not jacked the car up since to have a look.
@alextrim1342
2 жыл бұрын
Mines terrible so I was straight onto this lol
@DriveWithAndy
2 жыл бұрын
Hope it's helped 😁
@norm4260
3 жыл бұрын
To be honest the splitter you fitted to the bottom of the bumper probably exacerbated the problem by adding weight and wind resistance but good job fixing it
@DriveWithAndy
3 жыл бұрын
Oh you know that's a good point that and can see what you mean
@simner_alex8535
3 жыл бұрын
Looks good 👍🏻
@DriveWithAndy
3 жыл бұрын
Thanks man
@dchallam
3 жыл бұрын
Any help with closing up the gap either side of the lights where the bumper meets the arch piece
@DriveWithAndy
3 жыл бұрын
il have to check mine but dont think thats an issue with mine. maybe the brackets that hold them together have bent? i would take the hedlights out and see how they look. May need to adjust them or but some sort of little metal bracket, nuts and bolts and make it stronger
@RoryMacdonald1337
3 жыл бұрын
Have you got a link to those clips you used? My bumpers sagging too, and they look the same as the ones used underneath rear diffuser 🤔 which I also need 😂
@DriveWithAndy
3 жыл бұрын
Yeh sure this is the pack/kit I got, it's great for the price and so handy to have in the shed www.amazon.co.uk/dp/B0825WTPDH?ref=ppx_pop_mob_ap_share
@RoryMacdonald1337
3 жыл бұрын
@@DriveWithAndy thanks mate
@neurontechno
3 жыл бұрын
so typical mk6 problem, every single one out there has screws on bumper clips.
@paulevans4021
3 жыл бұрын
Good video.....Find us a solution for a cheap bonnet lip :)
@DriveWithAndy
3 жыл бұрын
Yeh have thought would like a bonnet lip or not sure if to keep the clean look
@RoryMacdonald1337
3 жыл бұрын
Could maybe get one off a Mondeo and cut it to size, lad at my work has one and I'm tempted to take some measurements of it and see if it's possible
@invernessramsay6061
3 жыл бұрын
sweet fix ty
@DriveWithAndy
3 жыл бұрын
😁 glad it's helped and thanks 👍
@Stickleback
Жыл бұрын
cool man, still own it? if so, how`s it holding?
@DriveWithAndy
Жыл бұрын
Yeh still good. I've been doing all kinds of mods since so had to take the headlights off and remove the plastic plug thing and replace a few times. Definitely helps the front bumper
@Fiesta_mk6_zetec
Жыл бұрын
Hey how are you
@U7449
3 жыл бұрын
Mine had the gap too, i just screwed in a small screw, no drilling or sort of that, and it was gone after that
@DriveWithAndy
3 жыл бұрын
I think the issue we or I have is having a front splitter on. As the air is hitting it and pushing it down so it's forcing the front bumper downwards. I need to secure it on each end as well
Пікірлер: 37