Stay tuned there will build patrol build coming out if my shed soon
@NorthOz
Жыл бұрын
Yes! Enjoy it mate!!
@NorthOz
Жыл бұрын
G'day legends! I'm so stoked it's up and running! If you are looking for the same mirrors, check them out here: tinyurl.com/sanhima
@mitchellsichter
Жыл бұрын
Do some digging on some forums and maybe consider running a little 2 stroke oil in your diesel. I know it sounds weird but there is evidence that suggests the move to Ultra Low Sulphur Diesel is affecting vehicles not designed for it. Adding the 2 stroke oil helps maintain seals and tolerances in the injectors and pumps that the sulphur would normally do. Big write ups on the 4WD Action forums. Just don't do it in common rail systems.
@NorthOz
Жыл бұрын
I’ll look into that. Very interesting. I wouldn’t have thought to do that 🤔
@The_KING24
Жыл бұрын
The Patrol is back 🤩🎉
@NorthOz
Жыл бұрын
Yes!! Ready for some budget camping!!
@user-rk9qj8bt9k
Жыл бұрын
I have two sets of front drive and passenger seats without rails from gq patrol 91 & 94 if your interested. We are in Cairns.
@NorthOz
Жыл бұрын
Oooh! Feel free to send me a message on Insta @northozphotography
@bertnelson4087
Жыл бұрын
In answer to your question; I like install videos that have quiet music with a voice over that explains what’s happening, or points out important parts. Obviously though, only works if you have enough to talk about to fill that space.
@NorthOz
Жыл бұрын
That’s great! Thank you for the feedback! I’ll incorporate a voice over next time too 👍
@TheJanope13
11 ай бұрын
Nice outcome mate. I must say i'm a little giddy i was right on the money with the crank angle sensor (cam angle sensor doesn't exist in a zd30di, essentially the same though.) My diagnostic process would be to look at the things could affect the symptoms you had run into. erratic rpm signal would defs suggest to look at the crank sensor and pulling that code would have pinpointed it too. I would highly reccomend learning how to extract CEL from the patrol if you plan to hold onto it for longer. Would've been disastrous to give it away for such a minor repair. So far my zd30 has had really scary issues of crank sensor, and a blown MAF that triggered permanent limp mode. I suspect the extra fuel pump could be a 'lift pump'. This is because that injector pump has to work pretty hard to suck the fuel all the way from the engine bay to the tank. Usually this lift pump mod is done as a way to hopefully prolong the life of the injector pump, but it must be done with other supporting mods like modifying the injector spill line (located on top of the injectors, under the valve cover) to deal with the extra flow.
@NorthOz
11 ай бұрын
I’m stoked it’s working well now and a few you guys helped me out with the diagnose which was great! The lift pump might not be the worst thing as the pump feels strong at the moment. I might not have to replace that any time soon 👍
@madcat4563
Жыл бұрын
Well, at least the repair wasn't too expensive/severe. Weird the inline pump install... Maybe they thought that it would reduce wear/"strain" on the mechanical pump..... No clue I can't remember if the patrol had any aftermarket gauges in. But if you plan on keeping it long-term, I would definitely look into it so you could keep an eye on the vitals. Boost pressure, EGT, coolant temp, maybe oil pressure..... It depends on what gauges it has from the factory. I'm not too sure if the ZD30 had issues with oil, but I would prefer to see it. The mirrors look tough as (I think that's how it's said).... gives it that pickup from the states look. What's nice is you don't have to drill any holes to fit it.... (70 series owners 😳)
@NorthOz
Жыл бұрын
Thanks for watching! Depending on how the engine goes for the next month, I may or may not get gauges. If I spend $1500 on gauges and gauge pods and installation then I have to replace the engine, It would be wasted money as I would be looking at a different setup which probably won’t require half of those gauges (boost etc). I like the mirrors too and the fact that it bolted on, made it easy as!
@brandonrigby6754
Жыл бұрын
I wouldn't raptor coat it only things id raptor coat would be bar work and the flares lose to much value keep it the paint job
@NorthOz
Жыл бұрын
I agree. I raptored the bullbar and even regret that 😆
@michaelhermans4753
Жыл бұрын
Great outcome I know how you feel My GU’s rough running was finally solved after months of frustration I lashed out and bought your mats and some new canvas seat covers Those mirrors look the part, they are on my list Sold out at vic off road Get rid of the 3 row of seats and put in a drawer system Steve from “Australian 4x4 adventures “ installed
@NorthOz
Жыл бұрын
Thanks for watching! I’m happy with the mats for sure. What seats covers did you get? I’m tossing up between a drawer system or just doing a false floor so I can chuck my boxes in there. Not sure yet 🤔
@michaelhermans4753
Жыл бұрын
@@NorthOz h Hi mark I originally wanted black duck however their pricing was over the top, so I went with the canvas seat cover company at half the price They haven’t arrived yet 12oz canvas they should do the job I will let you know how they fitted, I got front seats only as I regularly take the second row out to make room for stuff I actually use I built my own drawers 12 years ago had have done a great job Don’t get the kings ones they are heavy and too shallow False floor and tubs underneath are definitely a cheap option I built additional pieces that fit over the 2nd row when folded down and attach to the rear of the drawers giving a 2m long sleeping area The idea if your caught out in the torrential downpour you can throw up a small tent to put your stuff in and sleep in the car It also provides a big flat elevated are a giving better access to stuff
@michaelhermans4753
Жыл бұрын
The seat canvas company covers are well worth it, the quality is amazing
@TimTamsLOL
11 ай бұрын
great outcome there with the diesel mechanics! good to see it's running well
@NorthOz
11 ай бұрын
So well! Ran it for a while after this too without any issues
@healdy8990
Жыл бұрын
I belive with the lift pump most zd30 guys run them to help prolong the life of the injector pump so it isnt sucking fuel as hard But i belive there is more mods required. Such as spill return needs to be routed back to the tank instead of the pump but my knowledge on this is only from older di model not common rail
@NorthOz
Жыл бұрын
Makes sense but like you said, without the supporting mods it wouldn’t do much 🤷♂️
@jaysutton6307
Жыл бұрын
Nice, also music in install is good. Hey what work bench you got there? Wood top looks decent and back board is handy. You would recommend and where from?
@NorthOz
Жыл бұрын
Thanks for the feedback 👍 I got it from Bunnings. It goes okay. Some screws not lining up but I made it work and it’s a nice unit
@Sunderlanding_AUS
Жыл бұрын
definitely do yourself a favour and just check the connections on the factory snorkel. from factory they will come with a shoddy foam seal. before any big water crossings invest in some silicone and seal her up 😁😁
@NorthOz
Жыл бұрын
Oh for sure! This thing has enough problems as it is haha
@brentmcd12
Жыл бұрын
Timming chain ! and idler tensioner.. u can have a 14psi lift pump on the VP44 . it is a good mod ! Go the Patrol! 📹🛻😎🤙
@brentmcd12
Жыл бұрын
your revs n boost response is terrible also . factory solenoid must be blocked
@NorthOz
Жыл бұрын
Thanks mate! I’ll look into it 👍
@brentmcd12
Жыл бұрын
@@NorthOzhave you bought a ECUtalk yet ?
@Josh-jm2ci
Жыл бұрын
You should roptor coat it mate, you can do it yourself for about $900 to$1000. The paint on my patrol is getting a bit old so I'm doing mine next month.
@NorthOz
Жыл бұрын
I’m definitely considering it but the paint’s actually decent for now so I’ll leave that for when I chop it into a single cab 😏
@slothparade4184
Жыл бұрын
have you thought about reupholstering your seats? works out a lot cheaper and you can add more foam an stuff to. Could probably get your steerin wheel done as well.
@NorthOz
Жыл бұрын
Good idea but not sure how much it would cost. Less than $1000?
@richardwalsh5570
Жыл бұрын
I would rip the 7th seats out Mark. You won't know yourself camping with so much room 😅. Maybe look for a replacement steering wheel. That chip out of it would annoy me.
@NorthOz
Жыл бұрын
100% the seats are coming out. Not sure what to do about the steering wheel. I might just buy a cheap cover for it. A new wheel is like $500 🤔
@richardwalsh5570
Жыл бұрын
@@NorthOz wrecker for a wheel or Gumtree someone wrecking one?
@byronfanning2678
Жыл бұрын
It’s alive!! Survived WW3 yeww!!
@NorthOz
Жыл бұрын
Let’s go!! 🤙
@Repair-rookie
Жыл бұрын
awesome outcome!
@NorthOz
Жыл бұрын
Thanks mate! I’m absolutely stoked 😀
@craigparker4108
Жыл бұрын
Just do the trim & seat covers. Go out & use it & have some fun.
@NorthOz
Жыл бұрын
Sounds good to me 🤙
@AusMatt
Жыл бұрын
gunna put an egt gauge on anytime soon?
@NorthOz
Жыл бұрын
Good question. I might have to just to keep an eye on things. I might do egts and boost. What do you think?
@AusMatt
Жыл бұрын
@@NorthOz I wouldn’t be without my boost or egt gauges. Just gives you that extra piece of mind with the zd 🤙
@dijm8
Жыл бұрын
lol, do you realize what you said at the end? i think you meant mirrors not headlights 🤣🤣
@NorthOz
Жыл бұрын
Oh wow, must have been a long day completely missed it 😂
Пікірлер: 52