Boy lil d out there moooovin, that thing is a rocket yo can't wait to finish mine
@Spudstrodamus
4 жыл бұрын
Glad to see a video from you been a while. The make me more motivated to finish mine
@joealfaro9862
4 жыл бұрын
What kind of clutch that beast running. 💪
@hatchbackturbo93
4 жыл бұрын
ACT HD 6 puck
@SoFLaZ06
4 жыл бұрын
On #QuarantineDay3, we got videos
@hatchbackturbo93
4 жыл бұрын
Lmao
@nolimit12
4 жыл бұрын
D legend is back! yesssss!!!
@wiz_lsv2600
4 жыл бұрын
Ive been following ur channel dude. Ay man "You Mean Business"!! Big props to u.
@casink
4 жыл бұрын
Hey man just please be careful with that welded diff. My old set up with welded diff ran low 11s couldve went 10s but had no cage. I almost died because a axle let go and the car went straight into a power pole breaking it in 2. If anything check your splines regularly. Mine were sheared. I drove mine often on the street.
@ballsoutperformance
4 жыл бұрын
I was about to comment the same warning. Welding the diff is not worth the risk. Either run open diff or buy an lsd
@hatchbackturbo93
4 жыл бұрын
I pulled it out, it was awful to drive on the street.
@BoostedPastime
2 жыл бұрын
This is actually a very good point I had a very low-power naturally-aspirated d-series build and I used the original axles with had almost 300,000 miles on them I would do burnouts and pulls constantly and there were actually a couple occasions where my axle popped out thankfully nobody got hurt
@mauriciomejia1436
4 жыл бұрын
Very good video !! Thank you!
@rwright_sk8031
4 жыл бұрын
Man nice to see a new video ! Luv seen the beast !!
@HeROsiNhEaVeN
4 жыл бұрын
Welcome back ! 💪🏻👍🏻
@pabloariasgarcia2569
4 жыл бұрын
I wish you were my neighbor lol
@savethecivic96
4 жыл бұрын
Bro it’s been FOREVER since you made a video. Lol
@TpAcinC
Жыл бұрын
I weld my d16 trans in my eg5 476whp its working great 😃😃
@LatinoAD
4 жыл бұрын
Heck yeah it's been a while papi!. Been thinking where you been at?.
@brendonmaurer3947
2 жыл бұрын
Awesome video
@theedge5584
3 жыл бұрын
1:40 That's new.. lol......DO NOT GO THE LSD BLOCK ROUTE LOL..Damn Rattles...WELD IT
@armdrop1oh177
4 жыл бұрын
Beast mode
@noel8313
4 жыл бұрын
Day after Christmas for you...... How longs your Christmas you lucky S.O.B.
@abdullaali3735
4 жыл бұрын
hello, good job on fixing the trans no big issues, i want to know if the small bearing break what the reason for welding the diff? your car sound strong and fast, nice car for midnight runner not to street race could be dangerous fast engine
@ericdeco3661
4 жыл бұрын
hey merry christmas man
@alcobuilt2225
4 жыл бұрын
Killing it💪🏻
@erbringas
4 жыл бұрын
Been thinking of welding the diff on mine too. Since i cant afford an lsd. Is the car that much harder to control under WOT? I imagine it could steer really hard to one side if the road isnt even.
@hatchbackturbo93
4 жыл бұрын
Didn't notice any difference under power. Slow turns was awful. I actually took it out about 2 weeks after I put it in. I wouldn't recommend it on a street car.
@jockobo
4 жыл бұрын
@@hatchbackturbo93 glad you took it out. It's so dangerous
@zoemartinez2171
4 жыл бұрын
am trynna look bak there see wth is making all that rattleing my self lol good vid,
@hatchbackturbo93
3 жыл бұрын
haha, its my exhaust hitting the control arm
@ToolBoxTour
4 жыл бұрын
Rippin!
@v36vhr
3 жыл бұрын
I wish you could rebuild my transmission!!!
@euryellocotron
4 жыл бұрын
Sorry for my questions but what does it do to a FWD car if u weld the diff? What are odds of any? What are your intentions to do so?
@89hybrid88
4 жыл бұрын
Eury Salas both wheels have power as opposed to one.
@aexiy
3 жыл бұрын
hope you're doing well man with all this covid stuff going around
@manuelmunos5674
4 жыл бұрын
You could have used a phantomgrip lsd. Hurd those perform good.
@hatchbackturbo93
4 жыл бұрын
Yea, I've installed one In a friend's car and it worked decent.
@manuelmunos5674
4 жыл бұрын
I being thinking of installing one in my car. How is your friends car doing so far with that phantomgrip.
@hatchbackturbo93
4 жыл бұрын
@@manuelmunos5674 he doesn't have the car anymore but it was working good for 2 years or so before he sold it
@drtalon1668
4 жыл бұрын
Dude, who cut your o-ring grooves in the block? No machine shop in my area or a 100 mile radius has the circular CNC bit with the carbide that adjusts to cut perfect circles in diameters smaller than 3.75". I REALLY want to get my block o-ringed after going big stud, but I can't find anyone in NC to do this because they only ever specialize in big bore V8's engines or performance diesel stuff. Just curious who did yours. Before you went o-ringed on your big stud setup, how long did your head gaskets typically last at 500whp with small studs and no o-ring out of curiosity?
@hatchbackturbo93
4 жыл бұрын
Total engine Concepts in Riviera Beach FL. The head gaskets were holding no problem before I pulled it apart it wasn't until I pulled it apart that I had head gasket issues probably due to how hard I torque the head but I decided to do the big studs and o-ring the block so that I could turn the boost up
@drtalon1668
4 жыл бұрын
I want to do the same! But my power level goal isnt anywhere near as high as yours, 375-400whp at most. My block is CSS'd and big studded, but I really just wanted to knock out o-ringing and go copper head gasket in a reasonable time frame so I could mess around in higher power levels if I wanted and not worry about blowing a gasket. It doesn't look like it's going to be the case though. SCE gaskets who make the solid copper D series gaskets has no demand for o-ringed D series engines (lol), so each one is custom built and they advertise a 6-7 week turn around time. Everything else is ready to be put back together, except the final decision on cylinder sealing! I'm probably just gonna say f it and put a Cometic MLS in there, torque the studs to ARPs SRT4 spec and call it built. I'd love to take a drive down there in mine (family in FL) and check out your car sometime! Post on your youtube page if you ever decide to go to any car meets in the future! I'll drive down to check it out!
@yudelvyfuentes5607
4 жыл бұрын
💪🏻D💪🏻👌🏻
@c.g.4195
4 жыл бұрын
Testing in Mexico😁😁
@singlestickhero
4 жыл бұрын
Badass
@carmanworks1761
4 жыл бұрын
Hi cool video, are the synchromesh d16 s20 rebuild kits good and do do think the carbon syncros are worth the extra money? Thanks for any suggestions 👍🏻
@ragingowlbear524
4 жыл бұрын
is 3rd and 4th straight cut gears? could you tell me the pros and cons to that im building a turbo d15 ef for the mountains and have been looking into straight cut gears!
@hatchbackturbo93
4 жыл бұрын
Yes. 3rd and 4th straight cuts from MTM close gear. It's a lot strong because the base of the teeth are wider. Only real con is maybe the wine when in those gears.
@gsperformance2029
4 жыл бұрын
I have idle issue my d15b VTEC . Please help me to fix . I also checked idle Air control valve.vacume
@hatchbackturbo93
4 жыл бұрын
Message me on IG @turbokenny87
@gsperformance2029
4 жыл бұрын
@@hatchbackturbo93 okay brother 🙂
@Thomas-ql7ml
3 жыл бұрын
How has this welded diff held up? have you had any issues with the diff at all? would love to see more content!
@hatchbackturbo93
3 жыл бұрын
I took it out about a week later. it was rough to drive on the street
@meateaterwhitetail7291
3 жыл бұрын
@@hatchbackturbo93 how does it run from point A to B. Any maintenance issues. I want to weld my diff on my fwd lifted 1st gen highlander with 265/70/16 bfg km3 mud tires for offroading. But don't know how reliable it is??
@hatchbackturbo93
3 жыл бұрын
@@meateaterwhitetail7291 its pretty rough to drive, steering at low speed is very difficult. I took it out about a week later.
@meateaterwhitetail7291
3 жыл бұрын
@@hatchbackturbo93 even with powersteer???
@I-Human
4 жыл бұрын
Are your 3rd and 4th gears staight cut?
@hatchbackturbo93
4 жыл бұрын
Yes
@I-Human
4 жыл бұрын
@@hatchbackturbo93 oh, that's cool
@ambidexstress
4 жыл бұрын
What nrg seat is this one?
@hatchbackturbo93
4 жыл бұрын
I honestly dont remember let me see if I can find out.
@isitgoodtodo2834
4 жыл бұрын
do you know if the d15z8 has 3 stage vtec? if its worth doing some upgrades on it
@hatchbackturbo93
4 жыл бұрын
Yea, they still can get down
@pabloariasgarcia2569
4 жыл бұрын
Dserious🤙🤙🤙
@2_2_4_3
4 жыл бұрын
Should get the adapter for a B series transmission.
@shanemoneymaker
4 жыл бұрын
Do you understand what a cheap build is?
@michaelstoker5553
4 жыл бұрын
D2b is cheaper than rebuilding a trans every video🤷
@low-budget-racing
3 жыл бұрын
do you have power steering?
@hatchbackturbo93
3 жыл бұрын
no, car came with a manual rack. 93 VX
@low-budget-racing
3 жыл бұрын
@@hatchbackturbo93 is it possible to move the car around without running it?
@hatchbackturbo93
3 жыл бұрын
@@low-budget-racing yea, its easy to steer
@low-budget-racing
3 жыл бұрын
@@hatchbackturbo93 interesting - right now i have my diff welded and got power steering and it's nearly impossible to move the car around a corner in the workshop (without running engine)
@hatchbackturbo93
3 жыл бұрын
@@low-budget-racing i took the welded diff out about a week after I installed it. it drove like crap.
@officialvalencia9074
3 жыл бұрын
How does your trans hold up ?!??
@bastyviado5767
4 жыл бұрын
What axle are you using?
@hatchbackturbo93
4 жыл бұрын
Autozone axles 💪
@bastyviado5767
4 жыл бұрын
@@hatchbackturbo93 how much power it can handle?
@defserg
4 жыл бұрын
Why not go d2b?
@hatchbackturbo93
4 жыл бұрын
Cuz I'm stubborn
@defserg
4 жыл бұрын
@@hatchbackturbo93 fair enough lol i dont have the patience you do
@@hatchbackturbo93 I have d15b vtec all motor , mi final drive It is very bad, 4.05 and I can not find a power distributor anywhere, the d16y8 is not compatible with my d15b vtec😕
@edgarpizano823
4 жыл бұрын
Where do you work?
@hatchbackturbo93
4 жыл бұрын
I work for myself
@johnegvtec4910
4 жыл бұрын
Do i hear vtec on the background?
@hatchbackturbo93
4 жыл бұрын
Maybe, it opens just as the turbo really starts to spool.
@imreeflexx1878
4 жыл бұрын
D-Serious i think he meant @10:03
@hectorvazquez3303
4 жыл бұрын
Is that trans is a B series trans
@singlestickhero
4 жыл бұрын
It's a d16z6 transmission
@hatchbackturbo93
4 жыл бұрын
No, d16z6
@hevertpacheco7870
4 жыл бұрын
D2b bro
@brentiaconelli6484
4 жыл бұрын
Bro! You're a very intelligent guy... I can't understand why you keep pushing the d series platform way past somewhat reliable... You constantly have catastrophic failures... You have outgrown th d series reliable limits... Imagine what you could do with a k24 tsx and dc5 ..... You just gotta change 1 letter.... Kserious! Lol
@hatchbackturbo93
4 жыл бұрын
Haha, I've had a B18c ek and an 06 Rsx-s. The D-series is pretty cheap and I dont mind pushing the limits.
@89hybrid88
4 жыл бұрын
Funny !! You tell him he’s an intelligent guy. Then you proceed to tell him what he should do. Lol
Пікірлер: 105