Episode I: Coal Extractor - Gear Box change: 0:00 Part I 19:52 Part II 31:20 - Part III 42:08 - Part IV - Final Excavator - oil leak issue: 6:32 Part I 23:56 - Part II 32:58 - Part III - Final Mining Roof support legs: 10:39 Part I 25:52 - Part II 35:20 - Part III 40:02 - Part IV - Final Dam 14:46 Part I 28:28 - Part II 37:56 - Part III - Final
@driesvanmullem4570
Жыл бұрын
😊😊nin😊😊nnininnininnn😊nn😊nn😊😊n😊😊nn😊😊nin😊😊n😊😊
@miroslavmajer5155
Жыл бұрын
What the fuck? why are you stealing my comment?
@GBlunted
Жыл бұрын
😊😊
@HaMoOoDiE462
Ай бұрын
Thank you
@carmatic
Жыл бұрын
"With such a straightforward task, what could possibly go wrong?" the segways between the segments are the most dramatic and ominous narration in any documentary I've ever seen
@johnrossman6679
Жыл бұрын
If they find something broken, better send it to Curtis at Cutting Edge Engineering Austrailia. :)
@mooglemy3813
11 ай бұрын
Was thinking that earlier on. Great comment.
@lueyR
Ай бұрын
Hes a beast of a machinist, but this gear is too big for that workshop
@davidcrosthwaite
Жыл бұрын
Love all the Aussie nicknames for people in serious positions. “Here is the leader of operations, Wazza”
@soggybiscotti8425
Жыл бұрын
That's just a normal thing here mate. In one of my jobs when I was a young fella, I was able to lift much heavier loads than the older fella's I worked with, and my name is Ryan, so they call me R Bucket, and ordered me a bucket hat through the company with it emblazoned on it. And thats how I got my name, That's just how it goes here haha. I head a large cyber security firm now, but I'm still called R bucket, and I still wear my hat 😀
@RichardAutry-b1d
6 ай бұрын
Why, I she your girlfriend?
@1186mattman
8 күн бұрын
😢😢😢😂I😂@@soggybiscotti8425you your 😢😂😢mom is so 😢and 😂🎉😂😢😂😢❤😢😂❤😂🎉😂😢😂😂😂😂😢😂😂😂😢😂😢😂😂😂😂😂😂😂❤😢😂😂😂😢😂😢😢😂😢😂😂😂😂😢😂😢😢😂😂😢😂😂😢😂😂😢😂😂😂😢😂😢😢😂😢😂😢😂😢😢😂😂😢😢😢😂😢😢😂😂😢😂😢😢😂😂😢😢😢😂😢😢😂😂😂😂😂😢😂😢😢😂😢😢😢😂😢😢😂😂😂😂😢😢😂😢😂😂😢😢😢😂😂😂😂😢😢😂😂😢😢😂😂😢😂😂😢😢❤😂😂😢🎉😢😂😂😢😢😂😢😢😢😂😂😢😂😢😂😢😢😢😂😢❤😢😂😢😢😂😢😂😂😂😢😂😢😢😢😂😂😂😂😢😂😂😂😢😂😢😢😂😢😂😂😢😢😂😂😂😂😢😂😂😂😂😢😂😂😢😂😢😂😢😢😂😂😂😂😂😂😂😢😢😂😢😂😂😢😢😢😂😂😂😢❤😂😂😂❤😂😢😢😢😢❤😢😂😢😢😢😂😢😢😢😂😢😢😢😢😂😂😢😂😂😢😂😢😂😂😢😢😂😢😂😂😢😢😂😂😢😢😢😢😂😢😂😢😂😂😢😢😢😢😢😢😂😂😂😢😢😂😢😢😢😂😢😢😂😢😢😂😂❤😢😂❤😢😂😂😂😂😢😂😢😢😢😢❤😢😢😢😂😂😂😂😢😂😂😂😢❤😢😂😢😂😢❤😂😂😢😢😂😢😂😂😢😂😢😂😢😢😢😂😂😢😢😢😢😂😢😢😢😂😂😢😢😂😂😢😢😂😢😂😢😢😂😢😂😂😢😢😢❤😢😂😢😢😢😢😢😢😢😢😢😢😂😂😂😢😂😢😢😂😢😢😂😂😢😂😢😂😂😢😢😢😂😢😢😂😢😢😢😂😢😂😢😢😢😂😢😂😢😢😂😢😂😢😢😂😢😂😂😢😢😢😢😢😢😢😂😢😢😂😢😂😂😢😢😢😢❤😂😢😢😢❤❤😢😢😂😢😂😂😢😂😢😢😂😢😢😂😢😂😂😂❤😢😂😢❤😢😂😢😂😢😂😢😢😢😂😢😢😢😢😂😢😂😢😂😂😂😢😢😂😢😂😂😂😢😂😂😂😢😢😢😂😢😢😂😢😢😂😢😢😢😂😂😢😂😢😢😂😢😂😢😂😂😢😂😂😢😢😂😢😂😂😢😢😢😂❤😢😂😢😢😢😂😢😢😢😂❤😢😂😂😂😢😢😢😂😂😢😂😢😢😢😂😂😂😂😢😢😂😢😢😢😢😢😂😂😢😂😂😢😂😂😂😢😢😢😂😂😂😂😢😢😂😢😂😂😢😂😂😢😢😂😂😢😂😢😂😂😢😢😂😂😢😢😂😢😢😢😢😢😢😢😂😂😢😂😢😂😢😂😢😂😢😂😂😢😂😢😂😢😂😢😂😢❤😂😂😢😂😂😢😂😢😢😂😢😂😢😂😢😢😢😢😢😢😢😂😂😢😂😂😢😂😂😢😂😢😢😢😢😢😂😢😢😂😢😂😢😂😢😢😢😂😢😢😢😂😂😂😢😂😂😢😢😂😢😢😂😢😢😂😢😢😂😢😢😂😢😢😂😢😢😢😂❤😂😂😢😂😂😢😂😢😂😢😂😂😢😂😂😢😂❤😢😂😢😂😂😂❤😢😂😢😢😢😂😂😢😂😂😢😂😂❤😢😂😂😂😢😢😢😢😢❤😂😢❤😂😢😂😂😢😂😢😂😂😢😢😂😢😢😢😂😂😢😂😂😂😢❤😂😢😂😢😢😢😢😢😢😢😢😂😂😂😢😢😂😂😂😂😂😢😢😢😢😂😢😢😢😢😂😂😢😢😂😢😢😂😢😂😂😢😂😢😂😢😂😢😢😢😢😂😂😢😂😢😢😢😂😢😂😢😢😂😢😢😢😢😢😢😂😢😂😢😢😢😂😢😢😢😢😂😢😢😢😢😢😢😂😢😂😢😂😢😢😂😢😢😢😂😢😂😢😂😢😢😢😂😢😂😢😢😂😢😢😢😢😢😢😂😢😢😂😢😂😢😂😢😢😂😢😂😢😂😂😢😢😢😢😂😢😢😂😢😢😢😢😂😢😢😂😢😢😢😂😢😢😂😢😢😢😢😂😂😢😢😂😂😢😢😂😂😢😢😢😂😂😂😂😢😂😢😢😂😂😢😂😂😢😂😢😢😢😂😂😢😂😢😂😢😢😂😢😢😂😂😂😂😢😂😂😢😂😢😢😂😢😢😂😢😂😢😢😢😂😢😢😢😂😢😂😢😢😢😢😢😢😂😢😂😢😂😂😢😢😢😂😢😂😢😢😢❤😢😂😢😂😢😂😢😢😂😂😢😂🎉😢😢😢😂😂😢😢😢😂😢😂😂😢😂😢😢😢😂😢😢😂😢😂😢😂😢😢😂😂😢😢😢😢😢😢😢😢😂😢😢😢😢😢😢😂😢😂😢😂😂😢😂😢😂😢😢😢😂😢😂😢😢😢😢😂😢😢😂😢😂😢😢😢😂😢❤😂😢😢😢😂😢😢😂😢😂😢😢😢😂😢😢😂😢😢😂😢😢😢😢😢😂😢😢😢😂😢😂😂😢😢😢😢😢😂😂😢😂😂😢😂😢😢😢😢😢😢😂😢😂😢😂😂😢😂😢😢😢😢😢😂😢😢😂😢😢😢😢😂😢😂😢😢😂😢❤😢😢😂😢😢😢😢😂😢🎉😂😢❤😢😢😢😢😂😂😢😂😂😂😂😂😂😂😢😢🎉😂😢😂😂😢😂😂😂😢😂😢😢😢😢😢😂😂😢😂😢😢😂😂😢😢😢😢😂😂😂😢😂😢😂😢😂😢😢😢😂😢😂😢😢😂😢😢😢😢😢😢😢😢😢😂😢😂😢😢😢😢😢😂😢😂😢😢😢😂😢😂😢😢😢😂😢😂😢😢😢😢😢😢😢😢😢😢😢😢😂😢😢😢😢😂😢😂😢😂🎉😢😂😢😂😢😢😢😢😢😂😢😂😢😢😂😢😂😂😢😂😢😢😂😢😢😢😢😢😂😢😢😂😢😢😢😢😢😢😢😢😢😂😢😂😢😢😂😂😢😂😢😢😂😢😂😢😢😂😢😂❤😢😂😢😢😢😂😢😂😢😂❤😢😢😂😢😢😢😢😢😢😢😢😢😢😢😂😂😢😢😂😢😢😢😢😢😢😂😢😂😢😂😢😢😂😢😢❤😢😂😢😂😢😂😢😢😢😢😢❤😢😂😢😂😢🎉😂😢😢😂😢😢😢😢😢😂😢😢😢😢😢😢😂😂😢😢😢😢😢😢😂😂😢😢😢😢😢😢😢😢😂😢😢😢😂😂😂😢😂😂😢😂😢😢😂😢😢🎉😂😢😢😢😂😢😂😢❤😢😂😢😂❤😢😢😢😢😢😢😂😢😂😢😢😢😂😢😂😢😂😢😢😂😢😢😢😢😢❤😂😢😢😢😂😢😢😢🎉😂😢😢😂😢😢😢😂😢😢😢😢😢😢😢🎉😂😢❤😢😂😢😂😢❤😢😂😢😂😂😢🎉😂😢😢😂😢😂😢😢😢😢😢😂❤😢😂😢😢😢😂😢😂😢😢😢😢😂😢😢😢😂😢😢😢😢😢😂😢😢😢😢😢😢😢😂😢😢😢😂😢😢😢😂😢😢😂😢❤😢😂😢😢😂😂😢😂😢😢😢😂😢😢😢😢😂😢😢😢😢❤😢😢😢😂😢😂😢😢😢😢😢😂😢😢❤😢😢😂😢😢😢😢😂😂😢😢😂😂😂😢😂😢😢😂😢😢😂❤😢😢😂😢😢😢😢😢😂😂😂😢😢😢😢😢😢😢😢😂😢😢😂😢😢😢😢😢😢😢😂😂😢😢😢😂😢😂😢😢😢😢😂😢😢😂😢😢😂😢😢😢😢😂😢😢😢😢😢😢😢😂😢😢😂😂😢😂😢❤😂😢😂😂😢😂😂😢😂😢😢😂😢😂❤😂😢😂😂😂😢😂😢❤😢😢❤😢
@1186mattman
8 күн бұрын
😢😢😢😂I😂@@soggybiscotti8425you your 😢😂😢mom is so 😢and 😂🎉😂😢😂😢❤😢😂❤😂🎉😂😢😂😂😂😂😢😂😂😂😢😂😢😂😂😂😂😂😂😂❤😢😂😂😂😢😂😢😢😂😢😂😂😂😂😢😂😢😢😂😂😢😂😂😢😂😂😢😂😂😂😢😂😢😢😂😢😂😢😂😢😢😂😂😢😢😢😂😢😢😂😂😢😂😢😢😂😂😢😢😢😂😢😢😂😂😂😂😂😢😂😢😢😂😢😢😢😂😢😢😂😂😂😂😢😢😂😢😂😂😢😢😢😂😂😂😂😢😢😂😂😢😢😂😂😢😂😂😢😢❤😂😂😢🎉😢😂😂😢😢😂😢😢😢😂😂😢😂😢😂😢😢😢😂😢❤😢😂😢😢😂😢😂😂😂😢😂😢😢😢😂😂😂😂😢😂😂😂😢😂😢😢😂😢😂😂😢😢😂😂😂😂😢😂😂😂😂😢😂😂😢😂😢😂😢😢😂😂😂😂😂😂😂😢😢😂😢😂😂😢😢😢😂😂😂😢❤😂😂😂❤😂😢😢😢😢❤😢😂😢😢😢😂😢😢😢😂😢😢😢😢😂😂😢😂😂😢😂😢😂😂😢😢😂😢😂😂😢😢😂😂😢😢😢😢😂😢😂😢😂😂😢😢😢😢😢😢😂😂😂😢😢😂😢😢😢😂😢😢😂😢😢😂😂❤😢😂❤😢😂😂😂😂😢😂😢😢😢😢❤😢😢😢😂😂😂😂😢😂😂😂😢❤😢😂😢😂😢❤😂😂😢😢😂😢😂😂😢😂😢😂😢😢😢😂😂😢😢😢😢😂😢😢😢😂😂😢😢😂😂😢😢😂😢😂😢😢😂😢😂😂😢😢😢❤😢😂😢😢😢😢😢😢😢😢😢😢😂😂😂😢😂😢😢😂😢😢😂😂😢😂😢😂😂😢😢😢😂😢😢😂😢😢😢😂😢😂😢😢😢😂😢😂😢😢😂😢😂😢😢😂😢😂😂😢😢😢😢😢😢😢😂😢😢😂😢😂😂😢😢😢😢❤😂😢😢😢❤❤😢😢😂😢😂😂😢😂😢😢😂😢😢😂😢😂😂😂❤😢😂😢❤😢😂😢😂😢😂😢😢😢😂😢😢😢😢😂😢😂😢😂😂😂😢😢😂😢😂😂😂😢😂😂😂😢😢😢😂😢😢😂😢😢😂😢😢😢😂😂😢😂😢😢😂😢😂😢😂😂😢😂😂😢😢😂😢😂😂😢😢😢😂❤😢😂😢😢😢😂😢😢😢😂❤😢😂😂😂😢😢😢😂😂😢😂😢😢😢😂😂😂😂😢😢😂😢😢😢😢😢😂😂😢😂😂😢😂😂😂😢😢😢😂😂😂😂😢😢😂😢😂😂😢😂😂😢😢😂😂😢😂😢😂😂😢😢😂😂😢😢😂😢😢😢😢😢😢😢😂😂😢😂😢😂😢😂😢😂😢😂😂😢😂😢😂😢😂😢😂😢❤😂😂😢😂😂😢😂😢😢😂😢😂😢😂😢😢😢😢😢😢😢😂😂😢😂😂😢😂😂😢😂😢😢😢😢😢😂😢😢😂😢😂😢😂😢😢😢😂😢😢😢😂😂😂😢😂😂😢😢😂😢😢😂😢😢😂😢😢😂😢😢😂😢😢😂😢😢😢😂❤😂😂😢😂😂😢😂😢😂😢😂😂😢😂😂😢😂❤😢😂😢😂😂😂❤😢😂😢😢😢😂😂😢😂😂😢😂😂❤😢😂😂😂😢😢😢😢😢❤😂😢❤😂😢😂😂😢😂😢😂😂😢😢😂😢😢😢😂😂😢😂😂😂😢❤😂😢😂😢😢😢😢😢😢😢😢😂😂😂😢😢😂😂😂😂😂😢😢😢😢😂😢😢😢😢😂😂😢😢😂😢😢😂😢😂😂😢😂😢😂😢😂😢😢😢😢😂😂😢😂😢😢😢😂😢😂😢😢😂😢😢😢😢😢😢😂😢😂😢😢😢😂😢😢😢😢😂😢😢😢😢😢😢😂😢😂😢😂😢😢😂😢😢😢😂😢😂😢😂😢😢😢😂😢😂😢😢😂😢😢😢😢😢😢😂😢😢😂😢😂😢😂😢😢😂😢😂😢😂😂😢😢😢😢😂😢😢😂😢😢😢😢😂😢😢😂😢😢😢😂😢😢😂😢😢😢😢😂😂😢😢😂😂😢😢😂😂😢😢😢😂😂😂😂😢😂😢😢😂😂😢😂😂😢😂😢😢😢😂😂😢😂😢😂😢😢😂😢😢😂😂😂😂😢😂😂😢😂😢😢😂😢😢😂😢😂😢😢😢😂😢😢😢😂😢😂😢😢😢😢😢😢😂😢😂😢😂😂😢😢😢😂😢😂😢😢😢❤😢😂😢😂😢😂😢😢😂😂😢😂🎉😢😢😢😂😂😢😢😢😂😢😂😂😢😂😢😢😢😂😢😢😂😢😂😢😂😢😢😂😂😢😢😢😢😢😢😢😢😂😢😢😢😢😢😢😂😢😂😢😂😂😢😂😢😂😢😢😢😂😢😂😢😢😢😢😂😢😢😂😢😂😢😢😢😂😢❤😂😢😢😢😂😢😢😂😢😂😢😢😢😂😢😢😂😢😢😂😢😢😢😢😢😂😢😢😢😂😢😂😂😢😢😢😢😢😂😂😢😂😂😢😂😢😢😢😢😢😢😂😢😂😢😂😂😢😂😢😢😢😢😢😂😢😢😂😢😢😢😢😂😢😂😢😢😂😢❤😢😢😂😢😢😢😢😂😢🎉😂😢❤😢😢😢😢😂😂😢😂😂😂😂😂😂😂😢😢🎉😂😢😂😂😢😂😂😂😢😂😢😢😢😢😢😂😂😢😂😢😢😂😂😢😢😢😢😂😂😂😢😂😢😂😢😂😢😢😢😂😢😂😢😢😂😢😢😢😢😢😢😢😢😢😂😢😂😢😢😢😢😢😂😢😂😢😢😢😂😢😂😢😢😢😂😢😂😢😢😢😢😢😢😢😢😢😢😢😢😂😢😢😢😢😂😢😂😢😂🎉😢😂😢😂😢😢😢😢😢😂😢😂😢😢😂😢😂😂😢😂😢😢😂😢😢😢😢😢😂😢😢😂😢😢😢😢😢😢😢😢😢😂😢😂😢😢😂😂😢😂😢😢😂😢😂😢😢😂😢😂❤😢😂😢😢😢😂😢😂😢😂❤😢😢😂😢😢😢😢😢😢😢😢😢😢😢😂😂😢😢😂😢😢😢😢😢😢😂😢😂😢😂😢😢😂😢😢❤😢😂😢😂😢😂😢😢😢😢😢❤😢😂😢😂😢🎉😂😢😢😂😢😢😢😢😢😂😢😢😢😢😢😢😂😂😢😢😢😢😢😢😂😂😢😢😢😢😢😢😢😢😂😢😢😢😂😂😂😢😂😂😢😂😢😢😂😢😢🎉😂😢😢😢😂😢😂😢❤😢😂😢😂❤😢😢😢😢😢😢😂😢😂😢😢😢😂😢😂😢😂😢😢😂😢😢😢😢😢❤😂😢😢😢😂😢😢😢🎉😂😢😢😂😢😢😢😂😢😢😢😢😢😢😢🎉😂😢❤😢😂😢😂😢❤😢😂😢😂😂😢🎉😂😢😢😂😢😂😢😢😢😢😢😂❤😢😂😢😢😢😂😢😂😢😢😢😢😂😢😢😢😂😢😢😢😢😢😂😢😢😢😢😢😢😢😂😢😢😢😂😢😢😢😂😢😢😂😢❤😢😂😢😢😂😂😢😂😢😢😢😂😢😢😢😢😂😢😢😢😢❤😢😢😢😂😢😂😢😢😢😢😢😂😢😢❤😢😢😂😢😢😢😢😂😂😢😢😂😂😂😢😂😢😢😂😢😢😂❤😢😢😂😢😢😢😢😢😂😂😂😢😢😢😢😢😢😢😢😂😢😢😂😢😢😢😢😢😢😢😂😂😢😢😢😂😢😂😢😢😢😢😂😢😢😂😢😢😂😢😢😢😢😂😢😢😢😢😢😢😢😂😢😢😂😂😢😂😢❤😂😢😂😂😢😂😂😢😂😢😢😂😢😂❤😂😢😂😂😂😢😂😢❤😢😢❤😢
@1186mattman
8 күн бұрын
😢😢😢😂I😂@@soggybiscotti8425you your 😢😂😢mom is so 😢and 😂🎉😂😢😂😢❤😢😂❤😂🎉😂😢😂😂😂😂😢😂😂😂😢😂😢😂😂😂😂😂😂😂❤😢😂😂😂😢😂😢😢😂😢😂😂😂😂😢😂😢😢😂😂😢😂😂😢😂😂😢😂😂😂😢😂😢😢😂😢😂😢😂😢😢😂😂😢😢😢😂😢😢😂😂😢😂😢😢😂😂😢😢😢😂😢😢😂😂😂😂😂😢😂😢😢😂😢😢😢😂😢😢😂😂😂😂😢😢😂😢😂😂😢😢😢😂😂😂😂😢😢😂😂😢😢😂😂😢😂😂😢😢❤😂😂😢🎉😢😂😂😢😢😂😢😢😢😂😂😢😂😢😂😢😢😢😂😢❤😢😂😢😢😂😢😂😂😂😢😂😢😢😢😂😂😂😂😢😂😂😂😢😂😢😢😂😢😂😂😢😢😂😂😂😂😢😂😂😂😂😢😂😂😢😂😢😂😢😢😂😂😂😂😂😂😂😢😢😂😢😂😂😢😢😢😂😂😂😢❤😂😂😂❤😂😢😢😢😢❤😢😂😢😢😢😂😢😢😢😂😢😢😢😢😂😂😢😂😂😢😂😢😂😂😢😢😂😢😂😂😢😢😂😂😢😢😢😢😂😢😂😢😂😂😢😢😢😢😢😢😂😂😂😢😢😂😢😢😢😂😢😢😂😢😢😂😂❤😢😂❤😢😂😂😂😂😢😂😢😢😢😢❤😢😢😢😂😂😂😂😢😂😂😂😢❤😢😂😢😂😢❤😂😂😢😢😂😢😂😂😢😂😢😂😢😢😢😂😂😢😢😢😢😂😢😢😢😂😂😢😢😂😂😢😢😂😢😂😢😢😂😢😂😂😢😢😢❤😢😂😢😢😢😢😢😢😢😢😢😢😂😂😂😢😂😢😢😂😢😢😂😂😢😂😢😂😂😢😢😢😂😢😢😂😢😢😢😂😢😂😢😢😢😂😢😂😢😢😂😢😂😢😢😂😢😂😂😢😢😢😢😢😢😢😂😢😢😂😢😂😂😢😢😢😢❤😂😢😢😢❤❤😢😢😂😢😂😂😢😂😢😢😂😢😢😂😢😂😂😂❤😢😂😢❤😢😂😢😂😢😂😢😢😢😂😢😢😢😢😂😢😂😢😂😂😂😢😢😂😢😂😂😂😢😂😂😂😢😢😢😂😢😢😂😢😢😂😢😢😢😂😂😢😂😢😢😂😢😂😢😂😂😢😂😂😢😢😂😢😂😂😢😢😢😂❤😢😂😢😢😢😂😢😢😢😂❤😢😂😂😂😢😢😢😂😂😢😂😢😢😢😂😂😂😂😢😢😂😢😢😢😢😢😂😂😢😂😂😢😂😂😂😢😢😢😂😂😂😂😢😢😂😢😂😂😢😂😂😢😢😂😂😢😂😢😂😂😢😢😂😂😢😢😂😢😢😢😢😢😢😢😂😂😢😂😢😂😢😂😢😂😢😂😂😢😂😢😂😢😂😢😂😢❤😂😂😢😂😂😢😂😢😢😂😢😂😢😂😢😢😢😢😢😢😢😂😂😢😂😂😢😂😂😢😂😢😢😢😢😢😂😢😢😂😢😂😢😂😢😢😢😂😢😢😢😂😂😂😢😂😂😢😢😂😢😢😂😢😢😂😢😢😂😢😢😂😢😢😂😢😢😢😂❤😂😂😢😂😂😢😂😢😂😢😂😂😢😂😂😢😂❤😢😂😢😂😂😂❤😢😂😢😢😢😂😂😢😂😂😢😂😂❤😢😂😂😂😢😢😢😢😢❤😂😢❤😂😢😂😂😢😂😢😂😂😢😢😂😢😢😢😂😂😢😂😂😂😢❤😂😢😂😢😢😢😢😢😢😢😢😂😂😂😢😢😂😂😂😂😂😢😢😢😢😂😢😢😢😢😂😂😢😢😂😢😢😂😢😂😂😢😂😢😂😢😂😢😢😢😢😂😂😢😂😢😢😢😂😢😂😢😢😂😢😢😢😢😢😢😂😢😂😢😢😢😂😢😢😢😢😂😢😢😢😢😢😢😂😢😂😢😂😢😢😂😢😢😢😂😢😂😢😂😢😢😢😂😢😂😢😢😂😢😢😢😢😢😢😂😢😢😂😢😂😢😂😢😢😂😢😂😢😂😂😢😢😢😢😂😢😢😂😢😢😢😢😂😢😢😂😢😢😢😂😢😢😂😢😢😢😢😂😂😢😢😂😂😢😢😂😂😢😢😢😂😂😂😂😢😂😢😢😂😂😢😂😂😢😂😢😢😢😂😂😢😂😢😂😢😢😂😢😢😂😂😂😂😢😂😂😢😂😢😢😂😢😢😂😢😂😢😢😢😂😢😢😢😂😢😂😢😢😢😢😢😢😂😢😂😢😂😂😢😢😢😂😢😂😢😢😢❤😢😂😢😂😢😂😢😢😂😂😢😂🎉😢😢😢😂😂😢😢😢😂😢😂😂😢😂😢😢😢😂😢😢😂😢😂😢😂😢😢😂😂😢😢😢😢😢😢😢😢😂😢😢😢😢😢😢😂😢😂😢😂😂😢😂😢😂😢😢😢😂😢😂😢😢😢😢😂😢😢😂😢😂😢😢😢😂😢❤😂😢😢😢😂😢😢😂😢😂😢😢😢😂😢😢😂😢😢😂😢😢😢😢😢😂😢😢😢😂😢😂😂😢😢😢😢😢😂😂😢😂😂😢😂😢😢😢😢😢😢😂😢😂😢😂😂😢😂😢😢😢😢😢😂😢😢😂😢😢😢😢😂😢😂😢😢😂😢❤😢😢😂😢😢😢😢😂😢🎉😂😢❤😢😢😢😢😂😂😢😂😂😂😂😂😂😂😢😢🎉😂😢😂😂😢😂😂😂😢😂😢😢😢😢😢😂😂😢😂😢😢😂😂😢😢😢😢😂😂😂😢😂😢😂😢😂😢😢😢😂😢😂😢😢😂😢😢😢😢😢😢😢😢😢😂😢😂😢😢😢😢😢😂😢😂😢😢😢😂😢😂😢😢😢😂😢😂😢😢😢😢😢😢😢😢😢😢😢😢😂😢😢😢😢😂😢😂😢😂🎉😢😂😢😂😢😢😢😢😢😂😢😂😢😢😂😢😂😂😢😂😢😢😂😢😢😢😢😢😂😢😢😂😢😢😢😢😢😢😢😢😢😂😢😂😢😢😂😂😢😂😢😢😂😢😂😢😢😂😢😂❤😢😂😢😢😢😂😢😂😢😂❤😢😢😂😢😢😢😢😢😢😢😢😢😢😢😂😂😢😢😂😢😢😢😢😢😢😂😢😂😢😂😢😢😂😢😢❤😢😂😢😂😢😂😢😢😢😢😢❤😢😂😢😂😢🎉😂😢😢😂😢😢😢😢😢😂😢😢😢😢😢😢😂😂😢😢😢😢😢😢😂😂😢😢😢😢😢😢😢😢😂😢😢😢😂😂😂😢😂😂😢😂😢😢😂😢😢🎉😂😢😢😢😂😢😂😢❤😢😂😢😂❤😢😢😢😢😢😢😂😢😂😢😢😢😂😢😂😢😂😢😢😂😢😢😢😢😢❤😂😢😢😢😂😢😢😢🎉😂😢😢😂😢😢😢😂😢😢😢😢😢😢😢🎉😂😢❤😢😂😢😂😢❤😢😂😢😂😂😢🎉😂😢😢😂😢😂😢😢😢😢😢😂❤😢😂😢😢😢😂😢😂😢😢😢😢😂😢😢😢😂😢😢😢😢😢😂😢😢😢😢😢😢😢😂😢😢😢😂😢😢😢😂😢😢😂😢❤😢😂😢😢😂😂😢😂😢😢😢😂😢😢😢😢😂😢😢😢😢❤😢😢😢😂😢😂😢😢😢😢😢😂😢😢❤😢😢😂😢😢😢😢😂😂😢😢😂😂😂😢😂😢😢😂😢😢😂❤😢😢😂😢😢😢😢😢😂😂😂😢😢😢😢😢😢😢😢😂😢😢😂😢😢😢😢😢😢😢😂😂😢😢😢😂😢😂😢😢😢😢😂😢😢😂😢😢😂😢😢😢😢😂😢😢😢😢😢😢😢😂😢😢😂😂😢😂😢❤😂😢😂😂😢😂😂😢😂😢😢😂😢😂❤😂😢😂😂😂😢😂😢❤😢😢❤😢
@theq4602
Жыл бұрын
finally a documentary on this topic and a nice fat juicy one too spark always delivers good content
@AgricultureTechUS
6 ай бұрын
Astounding heavy machinery innovations push the boundaries of possibility.
@craxd1
Жыл бұрын
"Weren't planned for removal." Yes, they were, which is why they're there. No matter how well-designed, all machinery breaks down on occasion, which is why things like removable gearboxes and motors are used. The owner of the machine might keep spares on hand as well. Then there is PM, and preventative shutdowns, where things are removed and rebuilt, to keep the machine running. Things, such as bearing housings in the large weldments, if they're worn out, are welded up, on site, and bored out by portable boring mills, where new bearings are then installed. Everything is designed to be repairable, especially on these multi-million dollar machines.
@joekeeling7690
Жыл бұрын
P of
@oidbio2565
Жыл бұрын
Obviously not designed (or poorly designed) to be repairable in the case of the coal scoop! Maybe repairable for non-gravity situations but that's not what we have here. But it was probably advertised as being easy to maintain long term.
@cybyrd9615
Жыл бұрын
@oidbio2565 its one thing to spend $1k on a device you can't repair but this isnt toloerated in the $1m+ range wtf
@oidbio2565
Жыл бұрын
@@cybyrd9615 Well, that's the thing, isn't it. It IS repairable. The question is, how well designed is it for a reasonably smooth repair process. That's what I'm talking about here.
@grizzlygrizzle
Жыл бұрын
I hope they brought along a good assortment of o-rings.
@someoneelse7629
Жыл бұрын
I used to work on heavy machinery, there was always something going wrong when working on them, something siezed needing cutting, something needing a sledgehammer or something breaking while demontaging it. It was always under time constraint, and everyone shouting about how much it costed them that I took an hour extra when shit was stuck. I was going to work long into the night on a machine, and the owner of the machine saw me cutting a row of rusty clamps that costed $5 each, and he told me they were reusable, so I packed up, went home in time, and restarted where I left off the next morning, unscrewing the clamps by heating them with a torch, wirewheeling them and repainting them, taking a good hour to save the last 5 clamps, at the end of the day, I had about an hours work left on the machine, I walked by the owner and said "Time to clock out, it should be done within an hour tomorrow morning" He then had to pay me cash in the hand to stay an hour extra and finish his machine, and I wasn't cheap. But it was always the same, and I had enough and quit soon after that incident.
@ВасилийБаранов-ь9с
Жыл бұрын
Рэдхг эш😊😅😅😅 Э 😊😅
@vardenfell971
Жыл бұрын
it was always relaxing watching those semi robotic welders
@mickeyfilmer5551
Жыл бұрын
Enjoyable film, shame it keeps jumping from one project to another then back, I would prefer to see a single project from start to finish. Very interesting all the same.
@PBMS123
Жыл бұрын
this is a TV show what do you expect.
@amoliski
Жыл бұрын
@@PBMS123 the KZitemr that uploaded it could do us all a favor and save us from a Mitchell and Webb "I'm looking for a gift for my aunt" experience
@beffjezos7701
Жыл бұрын
2 hours of pure heavy machinery heaven.
@Saiko_PATH
Жыл бұрын
I worked with one of these in Denmark. We use em for unloading the coal out of the ships aswell.
@roberttriner6242
Жыл бұрын
The most intimate description of outback lovemaking 25:23 - 25:28 Absolutely epic.
@roberttriner6242
Жыл бұрын
Even more nasty..... 25:23-25:51 Nice.
@TheOne-xu5oy
Жыл бұрын
I chuckled at 1:22:20 when he said “as this heavy weight rolls off the scales”. I was like if that A320 is a heavy weight then I’m built like the rock.
@detonationpyrotechnics4156
Жыл бұрын
Big Muskie has joined the conversation. I was at the bucket last weekend and it’s absolutely monstrous.
@epistte
8 ай бұрын
I wish it could have been saved. It was a beast to see swing and dig.
@FrankNitty-007
Жыл бұрын
Was a rigger for 10 years and now I'm old and in poor health, but I miss building and moving big iron
@markwentz8332
Жыл бұрын
“If you can’t fix it with a hammer . . . . you have an electrical problem” 💪😜👍🏻
@GuiltyOne
Жыл бұрын
If you have an electrical issue, call me I'm a Master Electrician 😜
@markwentz8332
Жыл бұрын
@@GuiltyOne red seal pipefitter 🙋🏼♂️
@GuiltyOne
Жыл бұрын
@@markwentz8332 I have wanted to be a pipefitter for awhile now but working outside in -30°c weather made me decide to be an electrician instead..... you probably make 3 or 4x what I make I bet
@biznessdial3754
Жыл бұрын
AAAH😎....!!, YEAH.......!!, YO.................!!, ℹ️ THINK💭......!!, YOU NEED A MACHINIST & FABRICATOR & WELDERS ON MAJOR JOB SIGHT LOCATIONS, BECAUSE MECHANICAL ⚙️ MACHINES BREAKDOWN ALL THE TIME, BECAUSE OF STRESSES OF THE CONTINUES WORK PAY💰LOAD WHICH IS ALWAYS STRETCHER-IOUS & DAUNTING PEOPLE😎🇺🇸
@TradieTrev
Жыл бұрын
Electrical faults are fun though! Hat's off to the fitters, mechanics & boiler makers that do the hard yards!
@goldslinger
Жыл бұрын
Hats off to all the Men who keep society running smoothly and take pride in Their work. They do it for Their families.
@grammerpolicedeputy6913
Жыл бұрын
They make really good money though and the jobs seem very fun.
@Pencil0fDoom
Жыл бұрын
That pentle pin bushing bore-out fix was a rare barbed-wire wild-west moment that would probably cause most FAA materials & manufacturing engineers to swallow their tongues.
@rustythecrown9317
Жыл бұрын
looks like they over-torqued the spindle router.
@katiebarber407
Жыл бұрын
I would have thought that they could have Frozen the pen to shrink it or something instead of for the whole
@mooglemy3813
11 ай бұрын
@@katiebarber407if it don't fit don't force it. As to aircraft precision perfect is the rule. Poor maintenance or lack of same has caused many plane crashes. I'd say the landing pintle needed to fit perfectly out of the box. A master Machinist honed out the bush. For me that would work on a motorcyle or car but not certain about an aircraft at all. That procedure would have to be recorded as it modified a part. Also - 40° is not an unusual temperature for an aircraft. That also must be factored into parts by the manufacturer. No mistakes is the rule I'd say.
@katiebarber407
11 ай бұрын
@@mooglemy3813 good point
@niconutz898
Жыл бұрын
When you literally just need to smell the oil to be able to tell which oil it is 😁
@masaharumorimoto4761
Жыл бұрын
Longwall mining systems are VERY cool, the miners that run them have balls of titanium, no way I'd ever go under one of them!!!
@michaelurban2815
Жыл бұрын
I used to do this type of work. I miss it badly, loved working with a good crew and chain falls and ener-pacs to remove and repair broken equipment. But once your health changes your heart breaks 💔
@larrypostma2866
Жыл бұрын
Man I felt this in my soul. I was a pipefitter but broke my back. I miss it badly every thing I used to complain about I remember fondly now lol. I don’t know if it was the mental or physical challenges or have a great group of people around constantly but life’s not the same stuck at home.
@richardharding7767
Жыл бұрын
Was a millwright for a few years in a press shop. Do miss the guys and the pride of getting some heavy stuff back in working order. Makes me smile every time I hear someone say “we don’t need men” and remember that’s all I saw keeping their BMW’s rolling to the lots lol.
@ok0_0
Жыл бұрын
@@booyeah his came first bruh
@saltysnail7454
Жыл бұрын
ino
@saltysnail7454
Жыл бұрын
nkíjií injííiiiiii jin8iií íií iin
@jonathanbates3529
Жыл бұрын
Good Ole Doug, Tha absolute best dam Operator I have ever seen!!!!
@dadgarage7966
Жыл бұрын
A follow-up series showing the insurance adjusters, physiotherapists and orthopedic surgeons treating these fellows as they age would be interesting.
@brucesorensen3252
Жыл бұрын
Work is a four letter Word
@rustythecrown9317
Жыл бұрын
@@brucesorensen3252 a word the rich can't understand.
@katiebarber407
Жыл бұрын
not to mention the radiologists considering all the coal they are constantly around
@oidbio2565
Жыл бұрын
Lol! Yeah, the work done here wasn't optional, but with an excellently designed machine, the process could have required a smaller amount of troubleshooting. But the RICH would rather pay these guys than pay for an excellent design. It's cost effective. They keep more of their money.
@rosslefave5877
Жыл бұрын
The mental health to
@hopester0217
Жыл бұрын
Wow Very interesting !!! Question. Thousand or so years ago what was the process used to separate the silver/gold. Was Borax and zinc used ? Thank you
@donaldvincent
Жыл бұрын
Just like they still separate gold in the Amazon jungle. They use mercury. It sticks to the gold and sinks because it is very heavy. Then it is put in a pan over a fire and the mercury evaporates leaving the gold behind. All the gold melts and runs together to form larger nuggets. Not very safe breathing in mercury fumes.
@joanlittle4235
Жыл бұрын
I just love all the work these men . I think I never stop learning Thanks so mycu for this video...Granny U S A
@Gibonsli
Жыл бұрын
As someone said "We learn till we die. Gibbon Amazon Forest
@amosbackstrom5366
Жыл бұрын
Do those hydraulic roof supports not have a mechanical locking system in case of a hydraulic failure?
@darinpringle5611
Жыл бұрын
I would imagine
@bartman8876
Жыл бұрын
Just dropped a part of the big excavator off in AZ pretty cool seeing the site and the actual size of the equipment
@SlithenTurtle
Жыл бұрын
To think some of us feel like this while working on your car at home and live in the rust belt lol
@derricktaylor470
Жыл бұрын
This guy really enjoyed his time being able to say Dam over and over again. 😂
@sunpeaksturner
Жыл бұрын
Scaffolding is key..! To all my high flying scaffold brothers..who have families to feed 🤘🏽
@blowndome
Жыл бұрын
Shout out to Spark TV for keeping me entertained in county!
@ChundomanX
Жыл бұрын
Some skilled mechanics freeze the bolt and heat up the whole piece and is way easier to change the bolts
@themightymutt5213
Жыл бұрын
"With such a straight forward task, what could possibly go wrong?" C'mon man! You NEVER say something like that before any kind of project! (Yes, I know it was sarcasm)
@walter9724
Жыл бұрын
Wivenhoe dam. My backyard. My dad and two uncles worked on the building the dam and mum and dad bough a big property beside the dam.
@reddwudd6700
Жыл бұрын
Why didn't you guys use heat or even heat and wax to get the large bolts out? Also, why didn't yall loosen the hydraulic hose retention clamps when you stretched the hoses apart? Couldn't what you did cause stresses and possibly premature failure? Just wondering.
@mickhunt66
Жыл бұрын
it, hard to tell just from the videos, in my experience when ever I come along to see what everyones struggling with and ask the obvious questions like that there's always a reason why on that specific job its not possible... so who knows is guess. but I'm curious to know as well.
@Idahomie
Жыл бұрын
Even the most conscientious repairman take shortcuts. You hope they really don't short -cut the safety...and their unions can hopefully protect them from the toe -tappeing- clock- watchers profit motivated bean counters.
@amosbackstrom5366
Жыл бұрын
I don't think the bolts were seized, it was just the side load and pressure I believe. Wax might help but heat would only expand them and make it worse IMO
@sillybusta
Жыл бұрын
Nope heat would cause everything to grow. A heavy wall sleeve over the bolts and hollow ram then the nut for ram to push against and grease the other end as jacking against the other end would even cause bolt to mushroom before entering the bore. Fitted bolts are a gentle exercise and metal no matter how high tensile can deform.
@sillybusta
Жыл бұрын
As well as something to support the weight of gearbox.
@j5jackson878
Жыл бұрын
He knows the dam damn well and is damn good at his dam job!
@rustythecrown9317
Жыл бұрын
dammit.
@OJHussick
Жыл бұрын
Dam operator.
@j5jackson878
Жыл бұрын
@@rustythecrown9317 definitely should've ended that sentence with a "dammit"!
@mohdfahmi8841
Жыл бұрын
..em..
@pkoji1
Жыл бұрын
I worked as a machinist for LeTourneau. This is super cool.
@jameslees7775
Жыл бұрын
I've built the reclaimer buckets for the wheel
@kingming869
Жыл бұрын
2:19:08 I wish my company has group warmup activities like this.
@marcomcdowell8861
Жыл бұрын
As a hydro guy, I feel the digger mechanics' pain. You go through a arduous task only to find it to be a simpler fix later.
@Thiccness_Is_Delicious
Жыл бұрын
Thats every diagnostic profession 😅
@technodrone313
Жыл бұрын
i love smoking hydro too!
@nbooker7504
Жыл бұрын
Amazing, keep it up!
@dbzlinkinpark99
Жыл бұрын
My dad would’ve loved this he was always watching things like this
@SerielThriller
Жыл бұрын
Now I can repair my Tonka trucks, great tutorial.
@bambambundy6
Жыл бұрын
Wow. I felt good about working on my old John Deer.
@iLoveBoysandBerries
Жыл бұрын
You never had a John deer
@bambambundy6
Жыл бұрын
Deere that's the one I had. lol
@stoopsartsunlimited
Жыл бұрын
Thanks, Don and team. Next time I want to blow my kid's mind, I'll point out that they're moving at the speed of light.
@noeleljah9857
Жыл бұрын
He's a damn engineer... Sounds Epic
@SuperCarsFromTheHood
Жыл бұрын
I'm over here trying to figure out why farm sim 19 music is playing in my room and its this video lol
@davidotto7666
Жыл бұрын
Hey hey y'all doing Happy New Years anyway anything to do with big mechanical machine you work like this or anything that nature I'm all for big trucks muscle cars anything that nature all for it you guys are awesome I like this kind of stuff thank you again for the content God bless you have a blessed day
@Megellin
Жыл бұрын
45 min in day shift says "it's raining so we are going to go home and leave it to night shift" yep get use to that boys, plus do be surprised when day shift gets the only celebration party if you do anything right...
@phatphap_taitam
Жыл бұрын
It was always under time constraint, and everyone shouting about how much it costed them that I took an hour extra when shit was stuck.
@scorn010
Жыл бұрын
Pays for Premium to remove ads... content creators: "Not on my watch!"
@RolandElliottFirstG
Жыл бұрын
They are not Bolts, they are studs. (21:50) come on guys get it right, people watch this and pick up the incorrect information, also we work in metric not Imperial.
@mooglemy3813
11 ай бұрын
Roland as long as you don't believe everything posted on KZitem folks will be ok. But usually if you have some knowledge of a subject you will overlook many things. I agree with your comment though 100%!
@exploreworldbirds
Жыл бұрын
Is Tedious watching Constant switching videos from 1 project to another, increases length by 1/3 as each is reintroduced, just for more $.
@skunkhome
Жыл бұрын
All this heavy repair is like dancing with a clumsy giant.
@ScottGostick
Жыл бұрын
At 24:50 worker has a lapse in judgement that could cost him a hand. Can tell his hand is a bit to the side, but absolutely no reason to put it there since it is his brain tricking him to think he is doing something relevant. This type of work only takes seconds of poor judgement to have devastating consequences!
@orangedream267
Жыл бұрын
With that telescoping lifter, jack up the front of it, pop the pivots out of the hydraulic cylinders (the bracers), and swing them out of the way. Roll the sucker out. Hydraulic pressure should be dead, if lines have been cut. If they haven't bleed the lines. Hell, that might solve the bracing issue as well.
@69uremum
Жыл бұрын
I know right!
@amosbackstrom5366
Жыл бұрын
Exactly what I was thinking and they eventually did pop the pivots out but only after craning it out. I would have bled the lines immediately.
@jcc2c22
Жыл бұрын
We won't see adoption of this technology in my lifetime. Or, given that I'm 70, most everyone else as well.
@kenc5156
Жыл бұрын
This show is a prime example of why we have phrases like yada yada, and bla bla bla. This 2 hr and 22 minute program could have been done in about 45 minutes without all the over sensationalizing and over dramatization and yada yada and bla bla bla.
@chuckkeeler1112
Жыл бұрын
weld lifting lugs on the base .much love and respect
@alexpiper9475
4 ай бұрын
great images. like the commentary.
@Wiseguy248
Жыл бұрын
I like the pronunciation of schedule lol. Sedual
@compresswealthdivideeconom3757
Жыл бұрын
I am lost from the first few words. What are 'tuuhn', 'dyye', and 'toff'?
@bruceb3786
Жыл бұрын
mechspeak.......
@UKinQ8Gaming
Жыл бұрын
Words men use who do men jobs. Keep worrying about papercuts, zoom meetings and ironing your shirt while men keep the world turning. Your wifes boyfriend must be proud of you after this comment. I hope he let you play his xbox in the basement.
@montra1422
Жыл бұрын
“The dam wall” “As a dam operator” “Dam safety engineer”
@bradleytenderholt5135
Жыл бұрын
Excelente video!
@agamazing102
Жыл бұрын
The way you present your content is professional and easy to understand.
@elijahplays3133
Жыл бұрын
Why is there a TV show on KZitem… it’s amazing😂
@FBISHOJI
Жыл бұрын
Educational purposes
@InservioLetum
Жыл бұрын
You must be confusing youtube with something else, youtube has always been tv shows. It's what 'tube' refers to in the name. Boobtube, for you... youtube.
@lennyforester8743
Жыл бұрын
LOL at "Engineers repair and maintain". I've never seen an engineer get his hands dirty
@statest8088
Жыл бұрын
At least they're not working in their flip flops sandals.
@Idahomie
Жыл бұрын
Like the Chineses Osha' officials.
@JuliaWhite-ge4tx
Жыл бұрын
Awesome job
@tanyaerskine7657
Жыл бұрын
Is there a specific reason why the aircraft mechanics are using hand tools only? I'm a diesel mechanic and I have cordless drivers and impacts. I haven't used a speed handle since school, and I thought it was interesting that one of the techs in this video was removing screws with one.
@vincentmckinnon9152
Жыл бұрын
Aircraft mechanics working under FARs provided by the Admin are not permitted to use impacts/power tools on aircraft. I’m in A&P school currently and we do everything with hand tools
@tanyaerskine7657
Жыл бұрын
@@vincentmckinnon9152 Thanks! I wondered if that was the case.
@irrelevantwaffles
Жыл бұрын
@@tanyaerskine7657 not exactly. Plenty of use of power tools. A lot of aircraft parts are designed with much slimmer load margins than other stuff, to save weight, and a lot of aviation applications frown up on impacts or explicitly ban power tools entirely. But for the most part it's pretty common and it would be pretty stupid to regulate that out entirely. Electric ratchets and bit drivers are by far the most common as most aviation torque isn't very high. And when it gets high you get a torque multiplier and a 5 foot torque wrench or breaker bar.
@theq4602
Жыл бұрын
I would imagine that there is too much risk in overtorquing or damaging the more delicate and thinner aircraft materials made from lightweight stretchy alloys and composites.
@philiphorner31
Жыл бұрын
Equipment failure happened at Oroville Dam. So yes, it happens. Some people didn't do something.
@Idahomie
Жыл бұрын
Short of malfiesance..Hard to design/engineer for several 400 year weather/flood events now happening more frequently. ? There some good archival footage of the Teton Dam failure too. True ignorant 'human hubris' there.
@robertfitzsimmons2507
Жыл бұрын
Right on. Smart girl. Never to young to learn gun safety she's definitely a talented shooter for her age. Awesome
@Nunya_Bidnez
Жыл бұрын
The video does not do due justice to how HUGE these machines are. The Bucket on that Hitachi EX5500 is massive. It makes the operator look tiny.
@decler-gt7nu
8 ай бұрын
All machinery is meant to be disassembled for maintenance, tight bolts are meant to be tigntend and loosened in a particular order especially when under exstreamly high torque, usually heating up the bolt or nut with OXY aceterlin torch helps,and making sure they are properly greased, and you need one or two qualified mechanics overseeing the job so that everything is done right ,Its only hard if you make it hard ,a job is a job ,
@donjaun540
Жыл бұрын
Very interesting. It just goes to show that engineers don't know everything. Great video.
@mooglemy3813
11 ай бұрын
I worked for a Japanese company and the engineers valued experience. We had to report a problem and basically teach them about it with all pertinent info and root cause if we could define it. They told us we were the experts until they could grasp the problem. Completly different I'd say to North American engineers in their approach and being humble. It took time to gain their full confidence, but one you did you could say I think or believe and they would listen. I would only give solid facts and any question I could think of I answered before sending a report.
@98karlh
Жыл бұрын
Cool to have a look behind the scenes of the country and the companies that lead the fight against the fight against climate change :D
@TheCosmicGuy0111
Жыл бұрын
Teamwork makes the dream work
@robert1589
Жыл бұрын
Coal makes the life and environment go down... Clean energy makes the global heat go down...
@Jdalio5
Жыл бұрын
Don't say that ever again please
@robert1589
Жыл бұрын
@@Jdalio5 hahahahahahaha
@Jdalio5
Жыл бұрын
@@robert1589 cringy af right?
@robert1589
Жыл бұрын
@@Jdalio5 You're right. I should support black-lung.
@WaterDR-tw8re
Жыл бұрын
Only way to fix this.....stop buying cars. BTW, the 4xe comments you made were entirely wrong!!!!! The batter never goes dead. It's always a hybrid and it's by far the fastest jeep sans 392. Fun as hell to drive.
@dingdongmagee
Жыл бұрын
Love the “one bolt one shift” bullshit.
@gtdetan
Жыл бұрын
Too many Ads! Really spoils the watching experience.
@Oneover_137
Жыл бұрын
Premium chief...
@D3nn1s
Жыл бұрын
@@Oneover_137 not everybody wants to pay for literally all their services at this point
@winmarie1195
Жыл бұрын
A trick I learned, 1. Start video, 2. Advance to the last 1 or 2 minutes, 3. Let the video play to the end, 4. Press replay symbol. Video will replay with NO ads. Note: If you want to support the creators, let the ads at the beginning play, advance to the end, let the ads at the end play, press the replay symbol.
@D3nn1s
Жыл бұрын
@@suhail8704 nah supporting the creators is the way to go. You work for free too i presume?
@mikerob2134
Жыл бұрын
@@D3nn1sthen shut up and watch
@ioanbota9397
Жыл бұрын
Realy I like this video so so much
@bricefleckenstein9666
Жыл бұрын
0:37 Ooo, down under got baby Baggers!
@cynicalrabbit915
Жыл бұрын
Airbus Landing Gear Pintle Pin R&R. I love the way they over dramatize the pintle pin nut problem. Nuts refusing to go on even new parts isn't really that big a deal. In this case checking the threads on the new pin is the first step in solving the issue. Threads on new parts can have small pieces of metal from the machining process stuck in the threads. Cleaning the threads is fairly straight forward using a thread file. This will also repair the threads themselves (if) the threaded are was bumped on a solid piece of metal creating a slight dent and burr. This could happen if the machinist was a bit distracted while removing the finished part from the mill. Yep they presented the nut stopping due to dirty or damaged threads as more complicated than it really was. That's reality TV for you, if they hit a boring part of the video, create some drama by making mountain out of a mole hill.
@theq4602
Жыл бұрын
Better they do that than not make the show at all because the execs say its too boring
@bigredc222
Жыл бұрын
I couldn't believe it took two shifts for someone to figure out to clean the threads, that was the first thing I thought of, and those guys are supposed to be at the top of their field, they probably make great money. I wonder if it really took to shifts or did they just say that for drama?
@cynicalrabbit915
Жыл бұрын
@@bigredc222 All for drama to "fill" time, plain and simple. When I was in the AF and we ran into this problem alot. First thing look at 5he threads and if they're not messed up, just spray WD-40 and clean with a wire brush. If the threads were damaged, then reach for the thread file to fix the threads, then follow that with WD-40 and a wire brush to make sure the threads were clean, and our shop did not work on the planes or any part that could potentially be attached to a plane. There is very little reality in Reality TV.
@bigredc222
Жыл бұрын
@@cynicalrabbit915 I collect antique tools, I got this little dead blow jeweler's mallet with a brass head, it was made in 1888. It had threaded 1" dia. caps that held leather under them. The caps had super fine threads maybe 40 tpi, and both caps had been cross threaded. There's no thread file that small, so I found a tap with the correct tpi and used the cutting edge of the tap to scrape the threads clean. They showed them doing something similar with a thread gauge in the video. It took a silly amount of time but I saved that 135 year old little mallet.
@cynicalrabbit915
Жыл бұрын
@@bigredc222 👍👍👍👍👍👍👍👍👍👍 Except for a few small screws most of the messed up threads weren't more than 20 tpi. Plus brass is very soft and easy to cross thread. I too have used tap and die kits to repair threads but wanted to keep comment to a small wall. Besides i thought that thread file might get a Q or 2 from newbies or uneducated.
@Max-ye9xg
Жыл бұрын
Worked in a mine for 10 years the executives act like they're going to go broke if a machine isn't operating they just want their hundreds of millions of dollars every single day anything breaks they want it fixed fast fast fast even though it's brutally hard
@UserNameAnonymous
Жыл бұрын
You'd feel that way too if you invested hundreds of millions of dollars in something
@mooglemy3813
11 ай бұрын
@@UserNameAnonymous well the way of the world is huge profits. But look at the machinery the mine has to deliver coal. Millions of dollars invested. High wages for all the mine staff not to mention training the same. I'm no fan of coal. But those workers are for living. My two grandfather's were coal miners in County Dunham England. They busted their ass for meager pay. My mom's dad was a pioneer for The Durham Miners Association 1869. Got his 50th anniversary cert on the wall. Lost an eye and his pension was a Big Brit Penny per month. Both grand fathers died of mining complications abd they could really only put food on the table Rambling a bit but mining and mining support is a hard job to this day. Good luck Aussie coal .ine employees.
@effoffutube
Жыл бұрын
it's always doug and his team showing up
@Wormweed
Жыл бұрын
So much footage of a stuck telehandler...
@carcas3d
Жыл бұрын
1:00:00 The plane hangar looks like a dude being pampered by his servants while the other machineries looks like theyre begging for repairs kekw
@Angel_Racecraft
Жыл бұрын
I’m so high rn, I learned more off this than I have in school✌️
@scottinWV
Жыл бұрын
Why didn't they weld the lifting point back on the long wall jack?
@glentaylor6825
Жыл бұрын
Good stuff.
@colesteven1123
Жыл бұрын
Imagine getting only a 1000hrs, off a probably $75k part. Plus labor for removal/install(twice) Yikes. Bet the boys who put the 1k hour part in got a serious talking too lol
@Chairman-Mao
Жыл бұрын
Anyone else notice there were no women? I wonder why? Men do IMPRRESSIVE things and really hard tasks...Excellent documentary.
@nannerpie6184
Жыл бұрын
One thing I wish they showed was the amount and variety of cursing in a heavy equipment shop
@bamcameback
Жыл бұрын
Good lord padding the runtime at it's finest. lets cut this down to just the work please... coulda been a 30 minute episode
@shubamnautiyal5711
Жыл бұрын
Very lucrative business development
@gbresaleking
Жыл бұрын
I thought everything was bigger in Texas.. seems like everything is much bigger down under
@ThiloNorris
Жыл бұрын
The only reason I clicked on this was because of Lisa Simpson in the thumbnail
@MaliaynShunai
Жыл бұрын
Shoutout to the mechanics and helpers who repair and maintain the Giant Machinery
@florianbischoff9764
Жыл бұрын
one bolt per 12 hour shift performed by 4 people? sounds ludicrous. looked way faster than they said it takes
Пікірлер: 524