FYI Guys. There is a large "O-ring" at the base of that blue cylinder head and super important to check or replace if you are doing this job. In fact, for the 1900 there are 3 O rings there: SBA052310700, SBA052300900 and a tiny one SBA052100120. Cheers.
@DannysCam
Жыл бұрын
Hey thanks for the info
@TKM1951
2 күн бұрын
Now is the time to change the hydraulic fluid . Would it have hydraulic filter ?
@Tomcat71
Жыл бұрын
glad to see you getting the old girl back in shape.
@christinamoneyhan5688
Жыл бұрын
Your hydraulic oil needs changed, it has water in it . If I am not mistaken that oil also lubricates your transmission and differential. I know it is not cheap but if you want the tractor to last it should be done. Just saying.
@DannysCam
Жыл бұрын
I agree probably my next step plus there's a filter in the transmission you have to drain all the fluid to be able to get to
@christinamoneyhan5688
Жыл бұрын
@@DannysCam 👍👍👍👍👍
@donaldhofman5257
Жыл бұрын
The shifters have rubber boots around them that deteriorates over time and let rain water in and need to be replaced as well!
@christinamoneyhan5688
Жыл бұрын
@@donaldhofman5257 totally agree.
@philliphall5198
Жыл бұрын
Yep and it’s the main reason lower brg goes out and I make a lot of money because people don’t listen After 4or 5 grand they hear better
@Joseph-vh5fh
Жыл бұрын
We have a 1700 that was totally submerged in Katrina just flushed everything out still running strong.
@DannysCam
Жыл бұрын
That's awesome I keep this one as yard art until I get more land it sits 8 months but always fires right up
@johnandersson
Жыл бұрын
Nice work! Next time you replace a hydraulic seal. Drop it in boiling water before installation. It makes installing it 400 times easier! Great video!
@DannysCam
Жыл бұрын
Thanks for the info makes sense little heat would make it easier
@Watcohc
Жыл бұрын
Thanks! Doin one this weekend. That will come in handy.
@kerrysupporter
9 ай бұрын
Good job. Nothing fancy. Just get it going
@t.c.bowling1934
Жыл бұрын
Nice fix!
@jamesbailey7785
5 күн бұрын
Good find!! Would a piston ring compressor help ?
@Salemchevy
Жыл бұрын
My granddads old 1700 has the same problem it runs but the rear lifts don’t go up. I will have to try this and see if it works. Been scared to death to work on it since the parts as dam near impossible to get
@Joseph-vh5fh
Жыл бұрын
Could also be that the hydraulic filter is clogged up. It’s near the right rear tire 4 bolts this will also drain all the fluid.
@philliphall5198
Жыл бұрын
Charge hyd oil every year or two and filter you will never have trouble with hyd system, the tractor place I worked at would not buy antiz but the farmers bought it to me
@andrewhorsburgh2549
Жыл бұрын
Wouldn't let him work on any of my equipment.
@DannysCam
Жыл бұрын
The good news is id never work on your equipment either
@shaneliffin6116
Жыл бұрын
@@DannysCam Great answer....wish you lived near me. I'd gladly let you work on mine. Tough to find anyone anymore to work on these older models.
@SchnelleKat
Жыл бұрын
nice! odd that it is a CHN part. I'd love to see a detail on this !
@DannysCam
Жыл бұрын
That is odd sadly I think most are like that
@ajcz
Жыл бұрын
Ford tractors became New hollands which is also Case owned
@golfy808
Жыл бұрын
The SBA also designates a Shibaura part.. which these smaller fords were based off
@lowlayswarshrikant191
Жыл бұрын
Nice
@ElkoCowboy888
Жыл бұрын
WTF was that I just watched
@MrGerryoc
Жыл бұрын
What a bucther
@gbentley8176
Жыл бұрын
My thoughts exactly
@philliphall5198
Жыл бұрын
Don’t trust that flapper, put can over it and wire it down
@DannysCam
Жыл бұрын
Good idea I want to use her I'm amazing a good box grader or plow cost more then I paid for the tractor
@shaneliffin6116
Жыл бұрын
Can't seem to find this seal for a Ford Tractor, but I found one with same item number for New Holland Tractor. Will this work?
@DannysCam
Жыл бұрын
Should ford owned nh
@shaneliffin6116
4 ай бұрын
@@DannysCam Thank you!
@slackersteve2004
Жыл бұрын
good stuff man, whats next that needs fixing on her
@DannysCam
Жыл бұрын
I thinking about doing the transmission filter my fluid looks a little dirty don't want any trash to ruin my seal looks like it's a job, then one of my draw arms is bent, I bought a broken brush hog from a scrapper need to fix it up
@ajcz
Жыл бұрын
@@DannysCam you should service the trans, they frequently get water and such in them from sitting for long periods of time, just use a quality UTF. Not the Napa 303 or the cheap j20 fluid. Those are trashy oils
@barrygrant2907
Жыл бұрын
Don't use force, use a bigger hammer.
@DannysCam
Жыл бұрын
That's why my ex wife left me
@noahtheowl7107
Жыл бұрын
@@DannysCam HAHAHAHHA
@gbentley8176
Жыл бұрын
With respect you do not seem to have much affinity with machinery. Not sure what I have seen here
@DannysCam
Жыл бұрын
Haha ok
@windmillacres679
4 ай бұрын
Cool! I own the exact same tractor. I'm having a weird problem with my lift. After running for about 30 minutes the life quits lifting. Any ideas? Oh, I also don't have, and can't find, the dip stick for the trans.
@DannysCam
4 ай бұрын
You know mines acting like that to I might change fluid someone said there's a screen that gets plugged up
@billybarthol4768
Жыл бұрын
I've got 17 10 where can I order a lift kit?
@DannysCam
Жыл бұрын
Try Amazon first but also try newholland website ford tractors are now newholland basicly
Пікірлер: 54