Once again you've shown the difference between a Mechanic and a Fitter. A fitter just installs new parts but a Mechanic finds the problem and fixes it "Amen" Great couple of videos on the 6155m 👌👍
@masonmanesh6951
4 жыл бұрын
Technician vs mechanic
@canvids1
4 жыл бұрын
Happy for you Warren that you are getting the problems fixed with out high costs. I enjoy watching you repair things.
@leighriley6277
4 жыл бұрын
Man you know your stuff, excellent videos, I could watch you work all day 👍👍
@chascheess8470
4 жыл бұрын
Thanks Warren, for all the excellent information and your timeless video taping you do for all of us to learn from thanks again
@wesreeder6721
4 жыл бұрын
congrats on the new tractor Warren. I hope this turns out awesome for you and your Partner. Thanks for the grate video.
@conantdog
4 жыл бұрын
Interesting system 👀 glad I'm not having to diagnose and fix it , interesting to see the computer work to👍⚒️. You got good hands and and good mind 👌⚒️ good luck with the rentals .
@disturbedcarrot
4 жыл бұрын
Awesome video! Watching you figure stuff out is amazing!
@scruffy6151
4 жыл бұрын
Good to see it come alive, without costing a arm and half a leg lol. Sounds like a good running tractor. The pressure sensor for the three point may go away with the other arm back on. Good job trouble shooting. I hope things go well with the tractor rental. Next thing you will have a hay squeeze for rental, jcb tellahander and one semi tractor with a lowboy trailer. Just thinking forward for you Warren lol. Have a great day.
@sheldonserefine3808
4 жыл бұрын
We had international maxxforces we had to loosen the inlet pressure tube on the dpf, start the regen, and then tighten it up if it got over 50% soot level. Cheers to helping me learn about machinery when I can relate it to the fleet side!
@isaacgonzalez1536
4 жыл бұрын
Don’t you just love that i fixed it feeling ? Love the videos keep them coming.
@bryson1513
4 жыл бұрын
God bless you and your dogs!! Keep America running Mr. Warren!!
@rickinoakville1549
4 жыл бұрын
I am not in the equipment or truck repair business (I'm and electronic tech) but love watching Warren go through his troubleshooting process, and sort out all the issues!
@FB-tq5ln
4 жыл бұрын
Brilliant, great job. Brains only and no brawn needed. Experience pays off. Congratulations I am delighted you have it working.
@jounatherton7294
4 жыл бұрын
Best tractor engineer ever . love to you son and wife all be safe!!!! john uk london
@xaydemeyers3344
4 жыл бұрын
Great to see that the tractor is in good hands know! I love your videos I'm 15 and love to see how machanical stuff works and you explain things really well, thanks mate great video👍🏼
@wazza33racer
4 жыл бұрын
where I work, driving Petroleum tankers.......they had an 'older' truck with a DD15 that was doing a re-gen every few hours. All the drivers told management...........and were ignored.............until one day the re-gen went on for so long, the build up of heat MELTED all the air lines and electricals under the cab............. On another occasion a truck that was always doing prolonged re-gens drove into load gasoline at the terminal, and the severe heat on the muffler shield of the Kenworth set off all the fire alarm, infra red cameras!!! LoLz. Thanks again Warren for a really good detailed video on the system, its layout and how it works! ))
@canuckyank82
4 жыл бұрын
Really great lesson on DPF regent and the calibration trick. Interesting to learn about using injectors for regen vs that inlet or port or whatever it is. I would follow your advice about which system is better. But Deere engineers probably have a fairly good regent system with the injectors. Really an excellent lesson.
@NN072288
4 жыл бұрын
Panther piss. Man that reminds me of my grandfather. His piss of choice was wd. He retired from jd. Was a mechanic for them built our family a farm on the back of a 6030 I need to restore. Live the videos, keep em coming.
@grahammoore6386
4 жыл бұрын
Awesome job Warren. Good luck to you and your partner on starting this business. Anyone renting machinery of you will know they are getting a sorted out and good running machine.
@josdiepenbeek469
4 жыл бұрын
I agree. But HOW will they come back, after the job is done?
@robertbaker1914
4 жыл бұрын
You are amazing - brilliant - you should have your IQ done am sure you would be at gifted level. Really enjoy your videos, learn amazing things I never knew existed. THANKS
@ollie-lk5dx
4 жыл бұрын
Good job! Anxious to see hood repair.
@kerrygleeson4409
4 жыл бұрын
Always interesting Warren thanks for sharing 👍🇦🇺
@camshaftP16
4 жыл бұрын
Been pressure washing the doc and dpf's on the trucks for years and has always worked. This JD has the same fuel management as the Cummins Isc, Isl, and new X15 engines. The early ones use to coke up the turbo bad when they had regen issues.
@aaronbritt6498
4 жыл бұрын
I work at a school bus garage. I understand your pain with diesel emissions. Mercedes MBE 900 lockout for a forced cleaning at 150,000 miles and Cummins ISB at 200,000 miles or 6,000 hours. On the Cummins, we send out the SCR out with the DOC and DPF.
@markarmitage7411
4 жыл бұрын
Best of luck with the new venture Warren.
@markamcampbell6340
4 жыл бұрын
i got a 67 ford truck for free because the previous owner couldn't get it ti shift into gears. he put a brand new clutch on and installed it but it wouldn't shift so they took the transmission back out and put it in the back of the truck and forgot about it for a few years. i got it to get it out of his yard. i looked at the brand new flywheel and there was no pilot bearing. put a heavy duty one in and installed the trans and it works great.
@noseeum6385
4 жыл бұрын
Congratulations on solving that mystery. Not surprised you did. You usually have at least some minimal guidance from the owner's complaints or descriptions of symptoms they had encountered. Starting off with just your observations and constructing a likely scenario, testing your hypothesis, then narrowing the focus until the exact problem is identified and resolved is your forte. Almost always you prevail quickly, but you always prevail in the end. As for " how they get their money" question, I surmise they borrow it. They just can't borrow the brains.
@heavymachinery2843
4 жыл бұрын
Great work Warren
@jimdetchon3613
4 жыл бұрын
You know that completely slipped my mind Warren! Case has what you call a forced regen the Sam thing you did there. All the ones with out a doser have that option and some with dosers do to. The only think that’s bad about a forced regeneration is it can destroy the DPF. If it’s plugged bad but yours ran fine no derate problems. We both mist that one because I know you know about forced regen’s. I wish theses manufacturers would get together end use the same terminology. It was good to clean it anyway. It does clean the ash out and lengthens the life.
@dan_1003
4 жыл бұрын
nice work, looks like you may have a good runner
@chrisfarabaugh3235
4 жыл бұрын
Ive reset soot levels in "critical" levels before and done a regen. Just gotta make damn sure I babysat it to make sure it didnt overheat. Depending on manufacturer the soot level isnt always determined by differential pressure, but fuel usage and time/load calculation, so sometimes its not as bad as indicated. Usually a spec somewhere to get an idea if it truly is a critical soot level by seeing what exhaust back pressure or diff pressure is at WOT.
@cassiuspuckett8789
4 жыл бұрын
Well, come to find out, the regen was an easy fix. But damn, it was scary there for a bit. Not changing the filters and the oil, I'm thinking oh no, what did you get yourself talked into. But so far everything is kinda a okay. Nice video Warren.....
@robertstock9912
4 жыл бұрын
Hey Warren best of luck to you in your rentals hope it works out for you guys that would be a great
@harrykeel8557
4 жыл бұрын
Don't you love it when the plan comes together. Stay safe!
@donpetrey8007
4 жыл бұрын
An adjustable indexing pry bar works good for stuck t bolt clamps. Been there done that.
@jwjco
4 жыл бұрын
Awesome video Warren
@olspanner
4 жыл бұрын
Panther piss has always worked for me - never fails lol Haven't heard you mention cooling system , assume checked out OK?!
@briangarland9883
4 жыл бұрын
Great vidya Warren! Wanted to mention the turbo base looked kinda funny...might be a little loose? Anyway, love the content! Take it easy!
@timothyreed6054
4 жыл бұрын
You are the man Warren.LOL that nasty filthy steering wheel.
@ggcutter4098
4 жыл бұрын
In the Komatsu world we change them every 4500 hrs and yes you are right smaller engines use the injectors for dosing, and we tell them to run them like you stole it , and cut down on idle time this helps also sometimes if you tell the machine you put a new DPF in it will alow you to regen it and yes you do need to change oil at the right intervals and a low ash oil also , hope this helps , thanks for the video
@WBOS72
4 жыл бұрын
Warren, what does the exhaust look lime coming out of the exhaust pipe during regen? Great vid, thanks.
@johnerway7255
4 жыл бұрын
Warren very interesting, I know squat but, the way you detail shit, I am able to follow and understand the topic. lol that makes me a movie watcher. Thank you so muck for your video.
@conantdog
4 жыл бұрын
Your flying down the road 👍 my Kubota B 17 top speed is 12.5 MPH 🤭
@blacksmoke5009
4 жыл бұрын
Nice job bud thanks for sharing 👍!
@jakeyoung5324
4 жыл бұрын
On the newer john deere engines the 4045/6068 with SCR it uses in cylinder dosing via the injectors
@Ham68229
4 жыл бұрын
Never been a fan of this new stuff, too much can go wrong over a simple thing. Older equipment either it ran or it didn't and were always quite simple to work on. Cheers :)
@sheilaschepp5761
4 жыл бұрын
Small light duty diesels inject on the exhaust stroke to start a regen. It helps to take a metal marker and draw a line thru the clamps DPF and DOC for installation.
@westerntruckandtractorrepa1353
4 жыл бұрын
Not necessarily true. The 6170r have same engine and use a doser valve. Also the Duramax uses hci or doser valve.
@markamcampbell6340
4 жыл бұрын
i like the way you think. it must be a navy thing. instead of throwing parts at it you follow the chain of how it works and fix it accordingly.
@farwest571
4 жыл бұрын
More money than brains....a lot of that going around in this industry lately...many construction companies are only holding on to equipment for 5000 hours then trading them in for new ones....I only see specialized pieces hanging around for high hours
@dylansegato14
4 жыл бұрын
If it’s a high pressure common rail system it won’t have the extra injector to help heat up the dpf. The ecm will modulate the injector system to heat up the exhaust
@KevinJones-pj8kx
4 жыл бұрын
One suggestion on your hood. Get some West System epoxy and some of the additive fibers. Mix it to about a peanut butter consistency and reset the thread inserts into the hood mounting points. This is likely what your body guy would do but may use different materials. There is all kinds of information on their website.
@stuemany
4 жыл бұрын
I only work on Cummins and they fuel on the exhaust stroke. What I call the dosing valve is the injection valve after the DPF and before the SCR. It injects DEF.
@sealevel1919
4 жыл бұрын
Great video. All it needs now is soap, water and a rag.
@agmechanic94
4 жыл бұрын
I think this is starting to become common. I’m a field tech for Deere. Today I had this issue on a cane harvester with a 9 liter. Kept saying soot level high after I did a DPF recovery on it and the customer had done two parked regens on it before I got there but the differential pressure was 0.0 and it passed a SCR verification test. I fooled it with service advisor by going through the “DPF removed and professionally cleaned” reprogramming and the codes went away and the machine ran fine afterwards. Last month I had a 9510R still having high soot level codes after a service recovery with the same exact situation as the cane harvester. There was actually a DTAC solution for the problem.
@topixfromthetropix1674
4 жыл бұрын
I was in 6 different CAT dealer shops with problems associated with the REGEN cycle on a 3406 in the 2011 and 2012 time period. None of them could produce more than a temporary fix and I kept losing power, if I ran the REGEN cycle the engine would tell me it needed to REGEN 25 miles after a REGEN. Pulling 13 axle oversize limits the places you can comfortably break down.
@por15canada48
4 жыл бұрын
Only thing left to do now is to sit down and hammer out an agreement on paper re the rental business before going any further. It's not uncommon for partnerships to end poorly regardless of how long or well you think you know each other. Best of luck.
@davidspez7267
4 жыл бұрын
Same system as the VW TDI. Error Codes will stop the dpf regen sometimes also.
@2secondslater
4 жыл бұрын
The DPF system in these looks like it uses a similar system to a lot of the light auto vehicles, no doser or injector after the turbocharger to initiate a burn, just uses the injectors to add unburned fuel to the exhaust. The vehicles with these systems in light automotive require light throttle conditions at moderate rpm for 15 minutes or more to initiate a burn off. Usually this is a highway run above 80kph for 15 minutes to 1 hour. I can see equipment like farm vehicles that have this system falling foul to a blocked DPF because the are either at idle, under load or parked up straight after work is done, kinda like people that do only short trips in their diesel Audi. Luckily we have a company here in Australia that has a DPF restore product, you pulse atomise the product into the DPF through a temp sensor or differential pressure sensor port and then run the engine at 3000rpm for 20 minutes until all the soot is ejected from the exhaust. After that is done, a regen is done and you reset all the learned values to zero or conduct a DPF replacement function using a scan tool. Last but not least is an oil change as a heap of soot and fuel will pass the rings. It is soooooo much easier than remove and replace a DPF and whole lot less expensive.
@grumpyg9350
4 жыл бұрын
Good job!!!!!👍👍👍👍
@LBEGaming
4 жыл бұрын
Great video
@mfc4591
4 жыл бұрын
It is not like you tricked the machine, more like you did not let it trick you experience and asking good questions from those that know is always good.
@michaelkane732
4 жыл бұрын
i have always used thrust for over 30 years
@stevehill4615
2 жыл бұрын
Have you got a bit more info on how you cleaned the DPF as we've got a 6150r which won't regen and i'm hearing various ways of cleaning the filter (soap & water, pressure washing, solvents, heating gently with oxy propane etc) and is there any risks (damaging sensors) with these methods, also we have repaired thermo set plastic parts (john deere hoods, massey rear fenders etc) using a 2 stage method which is to V the crack or break (you can do both sides but isn't nescessary ----- we do hidden side if possible for the finish but rear fenders it's outside so we don't have to disassemble) clamp or tape parts together then run liquid superglue into the V and apply baking soda powder that'll immediately cure the glue (you can apply successive layers to build up material or even act as a filler ---- word of caution don't touch it as it's curing as it gets hot enough to burn skin) let it thoroughly cure for some hours, usually it's pretty strong but brittle so we follow this up with fiberglass tissue cut into little strips applied in a papier mache style which helps make the area more rigid and vibration resistent.
@sebastianciocan2157
3 жыл бұрын
Hello there. My 6115m just gives the ECU 3720.16 code and only does forced regen trough the dealer's computer but the code never goes away after 3h regen and is flashing yellow. Very frustrating that I cannot start the regen trough the OBD. Any chance you have the video where you actually cleaned the DPF? Pretty scared to pull it apart. Any sensors that can break inside or around that honeycomb? Great videos and really appreciate your work and patience with these highly "electronised" machines..best of luck! Seb.
@justintaylor6980
4 жыл бұрын
Do you recommend a diesel fuel additive if so what you see works best
@forumbezoeker
4 жыл бұрын
good evening . can't you reset the shoot level with your program and then start regeneration?
@squintin480
4 жыл бұрын
We have the same problem with the rental Kubota track skids we have. Always having regen issues because customers run them low and slow. Guy at Kubota told me to tell the to run em wide ass open😂
@michealmartin8565
4 жыл бұрын
That's a nice tractor
@eddygoodwin7089
4 жыл бұрын
How hard would it be to eliminate the dpf system if it is like the 6.4 wouldn’t it just be a recipe for disaster.
@robertbaker1914
4 жыл бұрын
Between you and "Squatch253" and Toby.............I have my daily fix of KZitem. Toby also very talented and a perfectionist that explains every detail as he restores an antique dozer.....hope its OK to make a plug on your page.
@dirtfireservices
4 жыл бұрын
If that regens like a 6.4 your oil is going to be full of diesel fuel. We all know how that story ended. I hope john deere did a better job then Ford and International with that type of regen system. I don't know how many engines I replaced on because of the fuel contamination in the oil. Theres a reason why I own a 7.3 lol. Great video as always.
@hellrazer4565t
4 жыл бұрын
7.3 same hear
@tonicetobegood1
4 жыл бұрын
I’m a John Deere tech Deere has the best emissions out there. We have very little problems with. The biggest problem is the customer.
@kevinoscarson2941
4 жыл бұрын
No issues as the 6.4, the biggest issues is john deere cant build an egr cooler to last. We will see if the lastest one last. Have there issues on the scr side but warranty has fixed most of it. Overall the deeres are far superior to the cats, but isuzu still has the best systems. I work on equipment side of deere.
@gcflower99
4 жыл бұрын
@@tonicetobegood1 How's that Kool-Aid, kid? Talk about "the company line"! You must have been a Chevrolet engineer--thinking that recirculating exhaust back through the engine to "try" and burn more exhaust the 2nd time around, which causes the engine to run less efficiently. Then, let's add some extra fuel to the exhaust stream to make the DPF hot enough to burn off the soot created from not burning the fuel efficiently in the first place.
@nspro931
4 жыл бұрын
@@tonicetobegood1 If you work for a Deere dealership how are you determining that they are the best? Not trying to start a fight here, just wondering. In my industry (small power unit engines) we kind of gave up on Deere a few years back because their aftertreatment was too clunky. We are taking a second look now. But also need to be able to service what we sell so we'll see how that goes.
@motocross4011
4 жыл бұрын
It seems when i use diesel laptop for John Deere it’s always kinda funny with the regen. I had the same issue with a jd 4046. The temps wouldn’t climb to where they should be. I took off the dpf filter blew out the doc and dpf with air. Installed. Level went from a 5 to 4 and the temps got around 1100. It worked. Sensitive bull shit .
@6point5by55
4 жыл бұрын
When you showed the display was in Spanish previously, I shuddered and thought...red flag...red flag right there!!!
@stevenm.2380
4 жыл бұрын
lol, same.
@moavic5087
4 жыл бұрын
Ein Felder chill its not racist! I’m Mexican I didn’t find it racist. You know damn well some of the raza working the fields only care about getting the job done and not stopping for regen 😂
@Jasonhb07
4 жыл бұрын
This machine wasn't a long-term investment and was abused as such. People could care less about stuff they don't own.
@JHruby
4 жыл бұрын
Yeah, never seen a white guy rig something to avoid proper maintenance. . .
@jimmyaber5920
4 жыл бұрын
I’m waiting on them to catch up with the true languages. The messages for Dixie should be “DPF plum full”, “fixin’ to perform regeneration”, and “check warning lahts”
@donniecoleman1324
4 жыл бұрын
Hey Warren, could you explain your acronyms, us that are not heavy equipment mechanics have no idea what a Dpm is,or stands for. Thanks
@jltcasper3
4 жыл бұрын
Yes deere runs in cyl doseing on there smaller engines The bigger engines have doseing injectors Deere has many problems with there egr coolers and burning coolant causing regen issues and plugging the dpf up also
@millyamp2214
4 жыл бұрын
That hard shifting transmission is caused by the front wheels turning backwards while the rear wheels are turning forwards. It's a very common problem on this model.
@alphonsotate2982
4 жыл бұрын
Thanks for the lesson I WONT buy any thing with DPF I WILL TRY TO FIND AND RESTORE OLD IRON
@williamlemaire9882
4 жыл бұрын
Nice country you live in Warren!
@sandy1653
4 жыл бұрын
For the hood, the folks that make that Fiberfix tape also make a Fiberfix flat patch lookin thing that might could be rigid enough to fix that part on the hood for ya.
@richmenaquale998
4 жыл бұрын
where do you get your coveralls? i would like to buy a set
@compactc9
4 жыл бұрын
Doesn't the 6.7 Cummins use the injectors for regen like that too?
@crazyjdkid
4 жыл бұрын
Most of the manufacturers have rules for there dealers that at stage 5 they must either send the DPF off to be baked or replaced. That's probably what the previous owners probably ran into, even though its not to expensive to have them cleaned.
@jwjco
4 жыл бұрын
Warren where did you purchased your software .
@mikpiece469
4 жыл бұрын
Maybe it is worth selling it? Or flipping it to a 250-300hp one?
@mumin1234567
4 жыл бұрын
Hello, what diagnostic equipment do you use?
@rbugbee5790
4 жыл бұрын
That's a great thumbs up.
@scrotiemcboogerballs1981
4 жыл бұрын
I agree fuel gets by rings if compression can leak bye then so can fuel
@dylansegato14
4 жыл бұрын
Scrotie Mcboogerballs all Diesel engine have blow by. Even brand new ones or rebuild ones
@jth1699
3 жыл бұрын
Man how fast do those tractors go in road gear??? It looks like it's making 50 mph??
@dandodds3681
4 жыл бұрын
Warren do an oil analysis on that sucker.
@Murphyslawfarm
4 жыл бұрын
G'day mate
@davidb.5807
4 жыл бұрын
Mid-range cummins does the same thing as far as no doser. Just uses the injectors to over fuel and superheat the exhaust.
@connorvelthuis2221
4 жыл бұрын
Hey warren, is there a difference between your laptops forced regen process versus the one I would do in the tractors menus? Apart from not letting me do the tractor’s on board one when the stop light is on, does it think differently when you plug into it or does it do the same routine?
@motocross4011
4 жыл бұрын
Farmer Connor it’s the same regen process. You just need the laptop when your locked out from to many failed regen attempts
@maxpacker5288
4 жыл бұрын
hood 4 dome head bolts paint same color
@717weston2
2 жыл бұрын
No issues with that crap where I live we repair that shit once never breaks again , lol
@adamtheede2575
4 жыл бұрын
thanks or showing this :)
@jimwesselman
4 жыл бұрын
As previously commented, it would seem like if you do a regen and not change the oil it could send the engine into a piece of scrap. Would it seem logical that they have you do the maintenance on the tractor to protect your investment!
@daleolson7205
4 жыл бұрын
Might want to pick up a new wiper blade at some point. 😉
@lukeoforcas
4 жыл бұрын
Could it have been one leg of your differential sensor was sooted up. Causing false bad readings
@bradanderson1627
4 жыл бұрын
I didn't see your fishing rods there Boy. 😅
@macbeth2354
4 жыл бұрын
More money than brains. Probably the number one cause of all sorts of equipment getting damaged all around the world.
Пікірлер: 210