Turned out great young lad. You seem like a very capable person. Your Dad must be proud.
@jetproject7955
Жыл бұрын
Thank you. That means a lot.
@BrutustheGladiator
Жыл бұрын
Dude put the break a way system back on this is suicide
@tcmits3699
Жыл бұрын
Nice job, looks good, but be careful those pretty decks get slippery fast. Sometimes a little rust isn't so bad.
@jetproject7955
Жыл бұрын
I know it. That surface rust acts like sandpaper sometimes. Thank you for the comment.
@johnsutcliffe9965
2 жыл бұрын
Looks great great, but please put that break away back on that trailer. It’s super important if that trailer comes off the ball it will keep going until it hits something or someone on the road.
@frankrester3727
Жыл бұрын
You did an awesome job!! 💪👍👏👊
@jetproject7955
Жыл бұрын
Thank you !
@cutweldngrind
Жыл бұрын
I bought a 24ft trailer and need to fix it up. I did put a winch and fixed a few cracks. Cool trailer
@jetproject7955
Жыл бұрын
Thank you!
@appelmac1
2 жыл бұрын
Whooops!! I saw some black paint get on those wheels!!! lol
@TheHomePros6221
Жыл бұрын
I subbed to your channel, you do good work and you remind me a lot of myself when I was younger. Keep it up! I would prob add some diagonal braces on the ramp jack arms and maybe add some more metal on them so it’s easier to drive up and the tires don’t fall in every hole. I like the property at your house nice and clean looking.
@jetproject7955
Жыл бұрын
Thank you for the comment. I’ll take note on those ramps for the next one I might work on.
@drich6816
Жыл бұрын
use a 3/8" hose with that impact as you'll get more power out of it.
@jetproject7955
Жыл бұрын
Somebody else recommended the same thing. I’ve already found another one, just gotta find a time to use it now. Thanks for the comment.
@mikehudick7074
Жыл бұрын
If the cutting disc on that angle grinder decides to come apart, you're gonna wish to hell you knew what face shields were. You DON"T wanna see what a piece of cutting disc can do to skin and bone!!
@jetproject7955
Жыл бұрын
I know it. I’ll have to get me one soon. At least I wear safety glasses most of the time.
@rcrtvtv7084
Жыл бұрын
That’s exactly what happened to me. Now am scarred for life a couple of centimeters loosing my eye. I was wearing only safety glasses. Now I wear a face shield and long sleeve when grinding.
@marcellopasini
Жыл бұрын
Nice and clean job!
@jetproject7955
Жыл бұрын
Thank you Marcello
@stevelawton818
2 жыл бұрын
Great job
@jazko
Жыл бұрын
Put a larger diameter air hose to the air gun, the current hose restricts airflow and reduces torque on the gun.
@jetproject7955
Жыл бұрын
I found another larger hose last week. Just waiting to find another project to test it out on. Thank ya for the comment.
@jazko
Жыл бұрын
@@jetproject7955 Good luck, the video was good.
@patrickmagee9374
Жыл бұрын
Why didn’t you paint the wheels while the tires were off?
@joshforman9438
2 жыл бұрын
Looks great! What do you do with the ramps when the vehicle hangs off the back and won't allow them to fold up?
@jetproject7955
2 жыл бұрын
That was one thing I would redo if I was going to do this project again. I would make the ramps removable. It also helps with loading on materials with a forklift from the back if the ramps are removable.
@MangoTangoJKU
Жыл бұрын
Nice job.
@jetproject7955
Жыл бұрын
Thank you Keith
@garyc4983
Жыл бұрын
Why didnt you pain the rims when you had the tire off?
@jetproject7955
Жыл бұрын
That’s a good question. The main reason is because it’s hard to not scratch the wheels when you are putting the new tires back on the rim.
@45AMT
Жыл бұрын
Your tire changer looks like mine. Bent bar and all. I need to get a new bar mine's about folded in half.
@jetproject7955
Жыл бұрын
I heard that. But for the money those things are hard to beat.
@georgecroney6168
Жыл бұрын
When you showed the tire changer I thought i might get one. Then I saw you climb on it which is exactly what I'm like and envisioned myself trapping my ballsack in the bead 😂💀
@jetproject7955
Жыл бұрын
Sometimes you have to risk it all to get your tires changed…
@skiz8848
Жыл бұрын
I bought one and the rod it came with immediately bent and I took it back. You can see in the video that his bent too and he's using his own pry bar with it.
@jpcheco
Жыл бұрын
Would have been a good time to check brake linings… and grease wheel bearings.
@jetproject7955
Жыл бұрын
You are right. I’ll try to remember that next time.
@joedoakes8307
Жыл бұрын
When you load a Heavy vehicle , Put your shift selector in NEUTRAL , and SET your parking brake !!! IF you don't you're Pushing against the parking Pawl in the trany and it wasn't made for that kind of force !!!
@jetproject7955
Жыл бұрын
I’ll do that next time. Thank you!
@luckygato8717
Жыл бұрын
Good video
@jetproject7955
Жыл бұрын
Thank you
@joedoakes8307
Жыл бұрын
The spaces between the 'rungs' on your ramps are to wide ! Might want to weld some xtra ones in between !!!
@truthality511
2 жыл бұрын
GREAT JOB I'M DOING THE SAME THING HERE IN BALTIMORE
@jetproject7955
2 жыл бұрын
Thank you. Good luck.
@southern_merican
2 жыл бұрын
Nice score !
@jetproject7955
2 жыл бұрын
Thank ya
@haulingit1793
Жыл бұрын
why didnt you paint the wheels when you had the tires off of them?
@jetproject7955
Жыл бұрын
That’s a good question. The main reason is because it’s hard to put the new tires on without scratching the new paint when you use the tire changer I have. Thank ya for the comment.
@BrutustheGladiator
Жыл бұрын
Why didn’t you paint the rims before mounting the tires ( doesn’t make any sense)
@jetproject7955
Жыл бұрын
I did that because when you go to put the new tires back on the rim, they usually get scratched in the process with the kind of tire changer I’m using.
@donaldcampbell5277
2 жыл бұрын
Looks good, but the hammer?
@jetproject7955
2 жыл бұрын
What about the hammer?
@kenclinton4881
Жыл бұрын
Very nice, what paint did you use that covered the rust?
@jetproject7955
Жыл бұрын
@@kenclinton4881 I used farm implement paint from Tractor Supply.
@livetoridecando
Жыл бұрын
I would have painted the wheels while the tires were off.
@jetproject7955
Жыл бұрын
I would have if I had a professional tire machine. I always scratch the wheels up really bad when I change the tires with my store bought tire machine.
@livetoridecando
Жыл бұрын
The jack and ramps are looking good.
@jetproject7955
Жыл бұрын
@@livetoridecando I appreciate it. Thanks for the comment Mr. Tom
@andyramz1705
Жыл бұрын
What is weight of the jack?
@jetproject7955
Жыл бұрын
It’s an 8,000 lb. jack
@GipDuece
2 жыл бұрын
Looks good, you gotta get that audio right though.
@jetproject7955
2 жыл бұрын
I know. I need to get a microphone.
@GipDuece
2 жыл бұрын
@@jetproject7955 I think on some programs there is the ability to level out the sound as well, so you talking is the same level as say grinding on metal.
@theboringchannel7685
Жыл бұрын
So using a f150 with other f150? Yikes ok
@georgegomez5654
Жыл бұрын
What kind of paint did you use to roll on trailer
@jetproject7955
Жыл бұрын
It’s farm implement paint from Tractor Supply. Thank ya for the comment
Пікірлер: 67