Have to just say, the true MVP in this video is Connor, i know he doesnt like the camera, but his efforts to date with the work on my car have been second to none. Also the way he explains everything on camera is nothing short of awesome. Need more connor on camera in the episodes to come. Awesome work fellas.
@mayhem1512
7 ай бұрын
One of the most underrated channels hands down
@cyclemoto8744
7 ай бұрын
Mint presentation Rich. I personally wouldn't mind some in depth "engineer talk" included. Just the right mix would be great. Thanks for the content. Cheers
@DesignedandBuilt
7 ай бұрын
Noted!
@timmyhasheart
7 ай бұрын
Love the tech aspect to this kinda shit so much man, such a good watch.. the tips for keeping it corner to corner when welding is awesome, people think that butting things up perfect with no gaps is the way to go, so showing that is mint. 🥵
@Franksssss
7 ай бұрын
As a Boily turned CAD guy, if you could touch base (for people that aren't in the know) of the hrs that go into the computer aspect of it.
@rtarrant1
7 ай бұрын
I’m amazed at the volume of work you undertaking…. love the technical explanation. Great work team.
@DesignedandBuilt
7 ай бұрын
Much appreciated! Glad you enjoy it.
@billybike57
5 ай бұрын
My first episode, love anything FJ!
@sirstevo
7 ай бұрын
This nerd wants you to break out the whiteboard! Love your videos mate. Keep up the great work. Wish I could do a collaboration with you!
@maverick9769
7 ай бұрын
I love cutting and welding and just landed on a Gem, ofcourse i was gonna subscribe.
@nickwalker147
7 ай бұрын
Me too, Id like to see the Whiteboard out :) and same for me too, I'm interested in the Engineering requirements too. When I investigated putting a 2002 Defender Coil Sprung chassis under my 1976 Landrover my Engineer advised that making my 1976 body comply with 2002 ADR's was going to be very very difficult so I'm interested to see how you guys do this build.
@DesignedandBuilt
7 ай бұрын
Hey Nick, this 80 series chassis is pre-97 ADR's so it will be much easier to meet than the 2002 requirements. Thats the reason we are using 80 series chassis and not 105/100/75/200 etc.
@mitchelllower8340
7 ай бұрын
awesome video mate i haven’t watched many fabrication videos that aren’t super boring but you have done well to condense it and break it up with the info on why. love all the info you can give if possible whiteboard for the win please even if it’s a seperate nerd video.
@DesignedandBuilt
7 ай бұрын
Thank you!! I'll see how it cuts up, ideally 2-3 mins of technical in a 25 min video would be good I reckon, but if it goes for longer I'll use your other video idea.
@benjaminjonholman
7 ай бұрын
Nice @EngineeringExplained shoutout at 17:20
@DesignedandBuilt
7 ай бұрын
Love that channel!
@judda14
7 ай бұрын
looks great guys also i love grinding too,,,,,,,
@KarlGreaves
6 ай бұрын
Go in depth as much as possible! The more details the better!
@VanDeanCustoms
7 ай бұрын
Loved this type of build vid! White board would be great too!
@DesignedandBuilt
7 ай бұрын
Thanks mate! I reckon we'll sneak it in!
@bengray_adventures
7 ай бұрын
Awesome vid.! Great to see how much actually goes into a chassis modification 👌🏼 More vids like this please
@MrSnellemelle
7 ай бұрын
Try using HRS (hot rolled steel) plate pickled & oiled for your plasma table. Welds nicer, read less spatter, and grinds so much easier then when you use steel plate which still has the mill scale on it. The grinding discs "slide" of the mill scale and wont bite anymore. You can see that the mill scale gets shiny like a mirror. Also the metal is already clean for paint so no need for shotblasting/ sanding if needed.
@DesignedandBuilt
7 ай бұрын
Thanks mate, I’ll have a look into it.
@rockcrawler31
7 ай бұрын
depending on how much more expensive pickled plate is, another way around it is to coat/paint the mill scale with pure phosphoric acid found in rust converters. It then comes off pretty easy with a strip it disc.
@richardwalsh5570
7 ай бұрын
So good having the table to work on. 🎉
@DesignedandBuilt
7 ай бұрын
It really is!
@lachywhite3069
7 ай бұрын
Awesome build. And definitely keen to see some more in-depth explanation to the engineering side.
@garynew9637
7 ай бұрын
Nice workshop, i extended my 91 jackaroo chassis to fit a rodeo d/cab in my shed.
@SHOCKcustoms
7 ай бұрын
Exceptional vid as usual. Thanks
@melbgrk6725
7 ай бұрын
Very very impressive .... 👍
@KoonceLyfe
7 ай бұрын
This level of detail was perfect. Enjoying the content brother
@DesignedandBuilt
7 ай бұрын
Much appreciated!!!
@JohneeB
7 ай бұрын
Nice work guys! Whiteboard Yes!
@BT_life2
7 ай бұрын
You guys are a top notch crew! Great build, great presentation! Your level of explaining is the bare minimum for explaining performance upgrades. I’d like it a little more detailed. Keep up the great work. Thanks for the content.
@DesignedandBuilt
7 ай бұрын
Much appreciated! Will get into some heavy detail in the suspension episode!
@VaughanMunro-js4nr
7 ай бұрын
Great Video Guys, easy to follow along.
@DesignedandBuilt
7 ай бұрын
Thank you 🙃
@gtrjudd86
7 ай бұрын
Love these videos mate keep it up
@jasonwishart6800
7 ай бұрын
whiteboard? yes!
@TheRitchieLeeShow
7 ай бұрын
Love this stuff. Tougher than nuts.
@MrHarryau
7 ай бұрын
Looking forward to this build.
@DesignedandBuilt
7 ай бұрын
So are we!
@87xfute
7 ай бұрын
Very cool build Richard, well done everyone. Seeya Rob
@DesignedandBuilt
7 ай бұрын
Cheers Rob!
@Suitmyselff
7 ай бұрын
Looking forward to this build very interesting
@DesignedandBuilt
7 ай бұрын
You and me both!
@Halfwheelhell
7 ай бұрын
love the video and explanation/ tech talk.
@iamdavidvitale
7 ай бұрын
Great work so far. Geek out! I think you'll smoke engineering explained with a worked example. And in terms of longevity of content...will be great to see how the design/engineering work is reflected in real-life execution.
@DesignedandBuilt
7 ай бұрын
Thanks mate, I think I'll start to put little snippets in before delving too deep. Seems to be the general feedback!
@callanrobison2674
7 ай бұрын
So gooooood
@DesignedandBuilt
7 ай бұрын
Thanks mate!!!!
@felixspiess
3 ай бұрын
Awesome content! Keep it coming, and show as much of the engineering aspects as possible, as project goes on. By the way I´m looking for a company here in Brazil to do a similar build (J45 Bandeirante).
@DesignedandBuilt
3 ай бұрын
Thanks mate, appreciate it!
@DCB1978
7 ай бұрын
Great episode, keep up the content and explanations 👍
@DesignedandBuilt
7 ай бұрын
Much appreciated!
@4x4ZOOK
7 ай бұрын
That's impressive but my hands hurt just thinking about having to do that much grinding 😂
@DesignedandBuilt
7 ай бұрын
🤣🤣🤣
@lawrencehendricks3347
7 ай бұрын
Good job. Keep it like this do you
@DesignedandBuilt
7 ай бұрын
Cheers Lawrence!
@liampoor9699
7 ай бұрын
Lesssss go!
@fugemlpriks1876
7 ай бұрын
How come you aren’t sweaty and dirty like Connor ?🤣. Keep it coming love it.👌👍
@DesignedandBuilt
7 ай бұрын
Hahaha, someone had to hold the camera.... My time will come no doubt.
@bennyjahmin3953
7 ай бұрын
Bust out the whiteboard for sure. Particularly on suspension geometry. Could you have triangluated the lowers more? Possibly then not needing to cut the bottom section out, along with increasing roll stiffness and having the chassis end mounts not hanging below the bottom of the chaissis rail? Only down side i can see is trying to package anything else inside the chassis rails like exhaust or fuel/water tanks.
@WhiteyNorge
7 ай бұрын
Awesome work! I'd really enjoy hearing about the geometrical advantages and extra travel compared to the OEM limitations. What droop/bump travel ratio are you planning, and will you be running a soft coiled compression biased damping setup for high speed off road?
@DesignedandBuilt
7 ай бұрын
Hey mate, we'll cover it all in a future suspension episode! 🙂
@garynew9637
7 ай бұрын
Whiteboard welcome.
@LifeInJambles
7 ай бұрын
Whiteboard sessions, please!
@GRUMPYOLDSURVEYOR
7 ай бұрын
Please bring out the white board. I love the explanations. How much of the original chassis do you need to keep to still satisfy the registration authority or engineer that it is still an 80 series?
@DesignedandBuilt
7 ай бұрын
I'm hesitant to say on here because I'm not sure if there are variations state to state, we haven't actually removed that much here although it looks like a lot!
@ratkillaummuguma420
7 ай бұрын
A 40 grit flap disc would cut that grinding time down significantly.
@DesignedandBuilt
7 ай бұрын
We used a 36 then a 50 mate.
@NoMatureContent
7 ай бұрын
Go full nerd, no one else really does. Even if I dont understand most of it, it'll still be more than we get elsewhere.
@DesignedandBuilt
7 ай бұрын
Thanks mate, might dabble into it a little bit - seems to be the consistent feedback!
@TylerBeckAU
7 ай бұрын
Love the finished product as well as the video's. Aside from the fact the 40 series is cool as hell, why not build an 80?
@DesignedandBuilt
7 ай бұрын
The 40 series body is nice and compact, it sits further in the wheel track than an 80 which is better for integrating barwork. We have also done a lot of development for 40 series cabs to make them serviceable, everthing is metal meaning its easy to customise and you'll see what we're going to weld in later on in the series. You hit the nail on the head though, we just love the look of the 40 series.... I do love the 60 as well personally, future series!?
@aaronnoyb
7 ай бұрын
60 series you say..... Do you guys make body mounts, to put a 60 on an 80 chassis??
@brendanm6360
7 ай бұрын
I’m all for showing more detailed eps in the future. Also my question is why use the 80 series chassis if you’re just going to redo 90% of it? Could the same just be done with a 75 series chassis or 60 series for example?
@barragu7189
7 ай бұрын
Hey mate, I think the reason for this is because of the extensive knowledge we have gained already with that proven chassis and because of all the great cad modifications/brackets/geometry they have developed to date with it all. I keep having to remind myself this isn't just an fj45/80 build, we are going all out and adding all the fruit that the boys have learnt/developed with the 80 chassis over the years.
@brendanm6360
7 ай бұрын
@@barragu7189 yeah that makes perfect sense mate. Cheers
@bafman
7 ай бұрын
Whiteboard!
@qdusen
10 күн бұрын
Given that you cut off all body and suspension mounts and changed the shape of the rails, it seems like it would have been a lot easier to have some rectangular tube mandrel bent to shape. Would have saved a ton of time on the welding, grinding and finishing too.
@DesignedandBuilt
10 күн бұрын
Fair point! There are a few ways to get it registered in Australia but we are opting for a way where we have to keep a certain % of the original chassis so its not an option unfortunately!
@ExpeditionExploreAus
7 ай бұрын
Wondered if this was the chassis on top of the container when I drove past LCS the other day (it’s near the tyre shop I use)! Must be another project in the works 😂
@DesignedandBuilt
7 ай бұрын
Haha just another donor chassis for a 45/80!!
@poraxtechnologies1013
7 ай бұрын
White board please for us diy guys
@henrya1051
7 ай бұрын
Lose the crappy background noise and you have made the perfect vid.
@DesignedandBuilt
7 ай бұрын
Haha no music you reckon?
@liamcan3262
7 ай бұрын
17:25 more details the better bud 👌
@DesignedandBuilt
7 ай бұрын
Cheers Liam!
@pedrofernando176
7 ай бұрын
👍🤙
@airakklein
7 ай бұрын
Will the files be available for purchase? for us overseas that can't pay LCS to do the job lol
@phillroo7871
7 ай бұрын
Just outta curiosity, with all that welding, welded in a fixed position, would it have been worth considering to stress relieve the complete chassis and frame together in an oven? I'm not an engineer and I'm sure you've done your homework. Just curious.
@garynew9637
7 ай бұрын
Do you clean inside the rails?
@hakie.
7 ай бұрын
Pardon my ignorance, as I'm not at all aware of laws and regulations in Australia, but with the amount of custom work needed for the chassis why not create your desired chassis from ground up? What would be the hassles associated with this route? Also if one was dead set on taking this route, what are the possibilities of success in terms of getting the ride registered, etc. Thank you and great video, looking forward to the series!
@DesignedandBuilt
7 ай бұрын
No worries - that would come with its own set of challenges. It would be an ICV in Victoria which has its own set of safety standards that have to be adhered to rather than this 80 series which is pre-97 Australian Design Rules. Basically a different set of hassles, this is the path of least resistance for us.
@hakie.
7 ай бұрын
cool thanks for the insight and good luck with the build @@DesignedandBuilt
@DesignedandBuilt
7 ай бұрын
@@hakie. thank you!!
@greatdane3343
7 ай бұрын
Good video and great work lads. Your use of cutting discs without disc guards nor face shields makes me squirm though 🤢
@jackmacmillan4907
2 ай бұрын
not sure if it has been asked before. have you weighed it before and after?
@DesignedandBuilt
2 ай бұрын
Negative sorry!
@jessehill1421
7 ай бұрын
Great job uncle Richie really enjoyed this video make me understand the work lcs do and love the fact you guys local to me. So by using the 80 series chassis means all your emissions and braking is based on that not the 40 series body ?
@DesignedandBuilt
7 ай бұрын
Glad you enjoyed it! Actually everything (in vic atleast) goes off the chassis regulations. 80 Series are a sweet spot because most of them are pre 97 ADRS!
@jessehill1421
7 ай бұрын
@@DesignedandBuilt thats interesting, thanks for the info got a few ideas floating around chassis swaps and custom 60 series / 79s might have to hit you up at some point keep up the great work
@DesignedandBuilt
7 ай бұрын
@@jessehill1421 60 on an 80 is a great combo and there is a lot of gear that already exists! Cheers Jesse.
@michaelnoyes4817
7 ай бұрын
are yous grinding all your plasma cut edges to remove the free carbon or just welding it up pretty much as is? love to see it all from start to finish
@DesignedandBuilt
7 ай бұрын
No we're not, sometimes we knock the dross off with a wire wheel when required and then blaze!
@michaelnoyes4817
7 ай бұрын
Check out As/Nz 1554 for guidelines on it
@DesignedandBuilt
7 ай бұрын
@@michaelnoyes4817 Checked with Conor, he has been taking back the edges before it's welded. I have been with Ally but not steel, but you learn something new every day cheers for that.
@derJackistweg
7 ай бұрын
8:50 why no plasma for that? A plasma should the the perfect tool for that. Especially as the frame is curved.
@DesignedandBuilt
7 ай бұрын
We needed to get the chassis cut to size for the plates, a plasma would have left 1.5mm excess.
@derJackistweg
7 ай бұрын
Right. @@DesignedandBuilt
@COSHAM77
6 ай бұрын
how do you go about getting something this modified registered? i hope you put out a video
@DesignedandBuilt
6 ай бұрын
It all had to adhere to VSB 14 at the end of the day! Hotrods do this sort of stuff all the time.
@brianb-p6586
7 ай бұрын
There's so little of the original frame left that using any of it seems pointless - why not fully custom-build a frame? It is just to have a original chassis number as a legal technicality?
@DesignedandBuilt
7 ай бұрын
Legal technicality!
@Equine_moon
7 ай бұрын
But how did you charge the batteries??? Someone had to ask!
@DesignedandBuilt
7 ай бұрын
Haha, charged at home which had power!
@Equine_moon
7 ай бұрын
@@DesignedandBuilt Ahh! That makes sense! Love your builds, I drive a 2006 VX100, and between us the wife and I have a HJ45, a BJ42, two HJ61’s and the 100, all in little Denmark🇩🇰
@DesignedandBuilt
7 ай бұрын
@@Equine_moon Haha that is awesome, sounds like a great collection - would love to see them rocking around Denmark!
@PeterHatch-mx7zc
5 ай бұрын
👍😄
@51roco16
7 ай бұрын
Can I ask, how come the centre section of the chassis doesn't get boxed in?
@DesignedandBuilt
7 ай бұрын
It's already quite strong as it is designed to deal with the load between the axles, no need!
@6226superhurricane
7 ай бұрын
you've made a copy of a jeep TJ/LJ chassis.
@ekdave1962
7 ай бұрын
Why the addition of patrol parts ?
@DesignedandBuilt
7 ай бұрын
The driveline and steering box are stronger!
@johnallen3555
7 ай бұрын
have a talk to your sound editor - stupid loud music volume - have to turn the volume up to hear your voice
@DesignedandBuilt
7 ай бұрын
Apologies, watched it back on my computer and wasn't bad but watched on a TV with surround and it was horrible. Will fix it up next time!
@ekdave1962
7 ай бұрын
Hmm its not really a80 chassis now , surprised engineer accepted so many mods to it
@DesignedandBuilt
7 ай бұрын
Hot rods & mini trucks can be fully notched, there is a certain percentage you have to retain to be able to register. We haven't actually removed that much % wise.
@macshop69
7 ай бұрын
Why not just get new tubes bent?
@DesignedandBuilt
7 ай бұрын
In Victoria we have to retain a certain percentage of the original chassis to register it which more or less rules it out unfortunately!
@macshop69
7 ай бұрын
Brutal! god speed@@DesignedandBuilt
@molotoboec70
7 ай бұрын
слишком много лишних слов , больше дела меньше слов , тогда будет интересно смотреть
@daviddunston43
7 ай бұрын
So your basically cutting and changing everything except the centre outer rails, instead of cutting up a good chassis why not just build a jig and start from scratch
@DesignedandBuilt
7 ай бұрын
As I mentioned in the video, that would come with its own set of challenges. It would be an ICV in Victoria which has its own set of safety standards that have to be adhered to rather than this 80 series which is pre-97 ADRS.
@prillewitz
6 ай бұрын
What the heck is a Barra?
@DesignedandBuilt
6 ай бұрын
Ford 4 litre I6!
@dannyconelly1454
7 ай бұрын
Drives me nuts when the brains come into the workshop and drop the old "we've done this" and "we've done that" Architects are the worst for it, they don't even bother with "We". Conner sitting back thinking. "yeah... We..."
@DesignedandBuilt
7 ай бұрын
Team work makes the dreamwork 😂not everything is captured on camera, but I'll be more mindful next time I'm editing
@shanevonharten3100
7 ай бұрын
Why not just build a new chassis from scratch, way less work and hot rodders do it all the time so its definitely legal
@DesignedandBuilt
7 ай бұрын
As I mentioned in the video, that would come with its own set of challenges. It would be an ICV in Victoria which has its own set of safety standards that have to be adhered to rather than this 80 series which is pre-97 ADRS.
@WDMTAdventures
7 ай бұрын
Great engineering feat Richo, but that montage altinating music is SH#T
@DesignedandBuilt
7 ай бұрын
How do you mean alternating music? Different songs or volume going up and down for the talking?
@WDMTAdventures
7 ай бұрын
@DesignedandBuilt volume going up and down, other than that, great episode 👏
@DesignedandBuilt
7 ай бұрын
What would you recommend out of interest? Hard to get the talking across clearly over the music. Very open to suggestions. Thanks mate :)
@WDMTAdventures
7 ай бұрын
@DesignedandBuilt sorry, the talking was fine, it was the first music that was a bit hard to take... all good, keep up the great content. Roger
@DesignedandBuilt
7 ай бұрын
@@WDMTAdventures fair, not as fitting as the rest. Cheers for the feedback, appreciate it and glad you enjoy the content.
Пікірлер: 155