The first time I clicked edit events was literally an hour ago, trying to find and remove a ghost automation. I looked at it for a second and thought to myself “hm. That’s interesting” and then I see this video! It’s a sign, I will learn and use this function. Thanks!
@premium670
10 ай бұрын
Just go to “current events” > “history” > “patterns” and you can find your automations and delete them
@BenFoilHat
10 ай бұрын
@@premium670 I haven’t produced any music since December of ‘21. I’ve been thinking about getting back into it for the last month. Your reply is a sign. Thanks!
@Music-tg5is
2 жыл бұрын
Nice tips. And I agree, Event automation is highly underrated and underused by many FLS users. My hope is that with the current automation improvements by the FLS team, that eventually, we could arrive at a hybrid system of the two currently separate automation systems. Offering the combined functionality of both, with the increased usability of the control point interface of the current Automation clips and Automation editor (in the 20.9 betas). I wouldn't want IL to drop the current Events system entirely, until at least complete feature parity had been achieved by any proposed replacement. i.e. full equivalent functionality of the Event LFO tool, and 'in place' Pattern automation within the Piano roll, etc.
@flstudiotricks6903
2 жыл бұрын
Let´s wait and see :-)
@AA-lq5pu
Жыл бұрын
Your tutorials are brilliant!
@DaveChips
2 жыл бұрын
I use event clips on regular basis and here is the trick I use. I automate fruity XYZ controller linked to a parameter I want to automate cuz it gives me more options with min and max values like with automation clips + u can connect more parameters to the same event lane + u can use smoothening of the XYZ controller if u have some obrut cuts caused by sample n hold artefacts.
@flstudiotricks6903
2 жыл бұрын
That´s a nice idea!! I´ll demonstrate this in the follow up vid!
@DaveChips
2 жыл бұрын
@@flstudiotricks6903 really hope that someone will find it useful :) Thank you for putting effort in making this videos and helping out community 😁
@Embrionyc
2 жыл бұрын
So you use the xyz controller as an attenuator? Thats very clever indeed!
@flstudiotricks6903
2 жыл бұрын
@@Embrionyc I like it better than the formula controller as it is graphically adjustabel...
@DaveChips
2 жыл бұрын
@@Embrionyc as an attenuator, declicker, randomizer (u can draw crazy tension shapes) and single control effects. For example linking riser volume, filter cutoff and filter resonance to a single slider. Adjust the tension and values for each too your liking In XYZ and enjoy clutter free riser with one event lane inside a pattern clip.
@misaanofficial
5 ай бұрын
Thank you for deep information in the video. The problem with events is deleting or undo what you have done like other parameters in FL when we use Ctrl key to turn them back. That is why it is a little frustrating for me and I try to use automations more.
@nerdexproject
2 жыл бұрын
Glad about your tuts man! It makes me giving it a try! :)
@AlexSeesing
2 жыл бұрын
Event editor is the only way to make human event edits.
@lhrider1312
Жыл бұрын
Thanks so much for clearing this up!
@ZeicoMusic
2 жыл бұрын
finally, I've asked so many youtubers about this... Thank you sir!
@amandembla7109
2 жыл бұрын
Thanks :) the community will give you back
@HazyJ28
2 жыл бұрын
This video came at a perfect time. Thank you!
@jokmenen_
2 жыл бұрын
Aside from the very useful information about events, I keep learning a lot of small tricks and shortcuts from you which is amazing!
@CelticStone
2 жыл бұрын
great as always, thank you
@gangsterdistrict1154
2 жыл бұрын
event editor is great for individual patterns. but Imageline should consider Automation clips per pattern same like events editor. automation clips in same way will be more easy and usable.
@flstudiotricks6903
2 жыл бұрын
I don´t know... I honestely like the 2 different methods... both have their advantages... I go over it in the follow up vid...
@georgereasonproductions
2 жыл бұрын
Very cool thank you
@93armel
2 жыл бұрын
Its a pity. Indeed this is forgotten because it is half of the usability and the other half is within the automation clips. The automation clips should have the possibility to edit like the pattern and it would be just as similar as other DAWs. For instante the lfos, the selection of a specific automation timeframe, and the time stretch...
@solo9334
Жыл бұрын
Wow, this video is amazing and so informative! Do you have any tips on how to delete event automation?
@RicoLee27
2 жыл бұрын
Classic feauture. Was good for oldschool dubstep wobbles
@GoutamSingh
2 жыл бұрын
thanks ☺️👌🏻👌🏻👌🏻👌🏻👌🏻
@NewMateo
2 жыл бұрын
my main gripe with event editor and the bottom editor in a pattern is I can't seem to snap anything to the grid - it's really really poor design and you end up having to freehand draw curves. I mean I SEE they have a grid...why can't I actually use that grid to set my points?
@dudedude5247
2 жыл бұрын
I prefer automating this way, lfo tool helps perfect it
@SongOfItself
2 жыл бұрын
How does one syunchronize event data with notes in a clip when notes are moved? An example: I recorded a short phrase where I moved the modwheel at some point. My recording started with a bit of silence, so I had to move the notes left, to the start of the clip. But the event data for the modwheel stayed in place, so the modulation was now at the wrong time. There seems to be no way to move the events the way we can move the notes, so a tiny mistake means I have to redo the recording. Is there a better way?
@flstudiotricks6903
2 жыл бұрын
The problem is that event data cannot be moved in a traditional way...i.e. you cannot select them and move them like notes... The best method would be instead moving the notes to select the time they are off in the PR Editor´s time ruler and use the command "Delete space" from the Edit menu... or to just trim the pattern clip from the left side... In both cases notes and events stay in sync...
@SongOfItself
2 жыл бұрын
@@flstudiotricks6903 Thank you!
@luciferianjesuslover9453
2 жыл бұрын
Is it possible to automate multiple things at once with one automation clip using fruity peak controller?
@ToT_music
2 жыл бұрын
👍 cool
@Bruno-xt5np
2 жыл бұрын
great tutorial, I have a question: Once you've already created an automation with "edit events" ¿how can I remove it or delete it?
@flstudiotricks6903
2 жыл бұрын
Open up the event editor by either rightclicking the parameter which is automated or by rightclicking the corresponding entry in the browser´s current project tab and say "Edit events"... When the event editor is in focus, select all by hitting CTRL+A and hit the delete button on your keyboard... Basically as soon as there is no automation events present for this parameter anymore the automation is deleted... Or if you have got the event automation in a seperate pattern, you could just delete this pattern and it would be gone too... Just be aware as with any type of automation in FL Studio that you would have to delete the inital value as well... this is not done automatically...
@Bruno-xt5np
2 жыл бұрын
@@flstudiotricks6903 Alright thanks! You'r the best
@vad1mcso244
2 жыл бұрын
Event edit introduced FL Studio 2
@deepak6529
Жыл бұрын
How to copy paste midi cc automations
@lhrider1312
Жыл бұрын
Is the narrator a real voice or generated😂
@yasinbakisgan
2 жыл бұрын
how can open this edit screen ?
@flstudiotricks6903
2 жыл бұрын
What do you mean with edit screen? The event editor?
@yasinbakisgan
2 жыл бұрын
@@flstudiotricks6903 ı m asking that automation piano roll 😑. Sorry i dont know its name😂
@flstudiotricks6903
2 жыл бұрын
@@yasinbakisgan There are several ways to open the Piano roll editor: - press F7 on your keyboard - Click on the button in your toolbar (2 buttons to the right from the Pattern selector) - doubleclick a pattern in the Picker Panel - doubleclick a Pattern in the Playlist - In the Channel Rack, rightclick a generator and say "Piano Roll" - View menu > Piano roll
@yasinbakisgan
2 жыл бұрын
ı m sorry for my bad english. I know piano roll. I am asking the panel in 0.36 second. :)))
@flstudiotricks6903
2 жыл бұрын
@@yasinbakisgan This is called the "Event Editor" In this video from 5:50min on I explain how to open it
@kalpesh9473
2 жыл бұрын
great tutorials.. will you guide me about .. Automation clip, click on left top and select --> Articulator tools --> Analyze audio File. actually like to make a automation clip for Delay on vocal for that i like to use it. after select the vocal file i will vertical the file for automation. i hope you understand my point.. not very well in English so..
@flstudiotricks6903
2 жыл бұрын
No sorry I don´t understand the last part of your request from the point where you select the vocal file...
@manthan_
2 жыл бұрын
bhai hindi aati ho to mein madad kar deta hu
@BenFoilHat
2 жыл бұрын
Do you mean make delay for a specific part of the audio clip so it only delays one spot, not delay all of the Audio?
Пікірлер: 51