This is a quick demonstration of how I made my Horus (from Gods of Egypt) cosplay wing harness. Feel free to steal this design! This quick tutorial is mainly for the harness, not the wings themselves. You can use the same harness for multiple different pairs of wings, which can be swapped out easily as long as the wings have a PVC pipe skeleton.
Template and assembly instructions for the WINGS (not the harness) can be found at my Etsy shop: sakimakesthings.etsy.com/list...
Materials needed for harness:
- A4 or letter sized scrap plywood
- old foam exercise mat or other foam
- contact cement
- 4x 1/2" PVC brackets
- nuts and bolts (I think I used 1.25-inch long #3 screws (2.5 mm diameter) but I can't remember)
- 3x 1.5-inch metal O-rings
- cable ties
- drill
- seatbelt strap
- buckle closure for seatbelt
- paint (optional)
Негізгі бет Тәжірибелік нұсқаулар және стиль Flapping Wing & Harness Design | Horus Cosplay
Пікірлер: 5