Thank you for the link. It brought me straight to it for another video as usual amazing content
@ATeePrint
6 ай бұрын
Thank you so much I'm glad it help you!!
@heatherreese6585
Жыл бұрын
Super helpful! I’ve been using a heat press but was wondering about swapping to a flash to make it faster- thanks for sharing this!
@ATeePrint
Жыл бұрын
My pleasure! 😁
@celtic1990k
2 жыл бұрын
Thanks for sharing your journey . I’ll be starting up my journey soon as well and this was one of the biggest questions I had and you helped me answer the question keep up the good work wish you the best your journey and thank you for your videos
@ATeePrint
2 жыл бұрын
That is awesome to hear! Just remember there's going to be bumps on the road but don't give up you will overcome them. I appreciate you for watching my video!
@billwatcher9321
Жыл бұрын
Thank you for sharing this. This will give you a laugh, I'm just getting into screen printing. I have been doing decorating / signage for years. Yesterday i was trying to cure a white plastisol print with my heat gun in one hand and my temp gun in the other while standing next to my 16 x 20 heat press !!! It never crossed my mind you could use a heat press to cure the ink.
@illy2066
Жыл бұрын
I totally understand this LOL Had a heat press sitting and wasn't even using . Stressing myself with the heat gun hoping it worked out
@ATeePrint
Жыл бұрын
Your welcome! That is too funny 🤣. I can literally picture you doing that🤣. But it's okay, that's why we are here to learn from each other. Now you know for next time.
@mdesiigns
Жыл бұрын
Thanks for this vid bro..i just started screen printing and needed to figure out how to cure FN Ink with a Heat press 🔥🔥👌🏽
@ATeePrint
Жыл бұрын
It is my pleasure! I appreciate you for watching 👊
@obstacleillusion808
2 жыл бұрын
We love curing with the heat press! Dope video fam
@ATeePrint
2 жыл бұрын
Thank you like always! 🙌
@PrettyLittleBrownie
Жыл бұрын
Amen brother
@bigdap100
Ай бұрын
Great videos brother.✅✅✅ APTTMH!
@sanasana2435
4 ай бұрын
This videos 🔥 thank u brotha
@ATeePrint
4 ай бұрын
Thank you for stopping by!👊
@niallgibbons1120
3 ай бұрын
Hey man love the content. Can you do a video about the line you have to line up your logos etc on your board and what you use to keep the tee down. Thank you
@VeniVidiVici444
4 ай бұрын
Thanks!
@ATeePrint
4 ай бұрын
You're Welcome!
@JohnnieIsBored
2 жыл бұрын
Can you get a better results if you were to use a higher mesh count and also doing more than one pass?
@ATeePrint
2 жыл бұрын
With the heat press it does not matter what mesh count you use because it will always flatten the ink and it will give you a softer feel. Now to answer your question? on the mesh count, The higher the mesh count it is the less ink will be deposited So yes you will get a softer feel. If you haven't seen part one here's the link And here you will see me cure plastisol ink using the flash, And I'm using a 156 mesh On this video. Also you can follow me on Instagram: @ateeprint and there you can go ahead and direct message me if you have any other questions? Thank you for watching!! kzitem.info/news/bejne/xWmZmKeDn5WCf6Q
@michaelkozia7275
2 жыл бұрын
Nice man. Much success.
@ATeePrint
2 жыл бұрын
Thank you for watching!!!
@kingkeex4008
2 жыл бұрын
Quality videos bro, your channel will be big one day
@ATeePrint
2 жыл бұрын
I appreciate that thank you so much 🙌
@mathewgow3804
Жыл бұрын
Thanks
@ATeePrint
Жыл бұрын
My pleasure!
@LupeGonzales-m8y
Ай бұрын
do you have to use a different piece of parchment pater for every shirt?
@angieramirez5642
7 ай бұрын
So which way do you prefer to cure? And why?
@ATeePrint
7 ай бұрын
I prefer to cure it with the flash
@teesprintandapparel
Жыл бұрын
hey! are you still in the business? you plan on making more videos?
@ATeePrint
Жыл бұрын
Yes I'm still in the business, And yes I'm planning to make more videos! Just been so busy I recently moved But I'll be back making content again 😁
@enionlinetv
2 жыл бұрын
Inbetween prints you used the heatgun. After second pass of ink did you heat it up before pressing it? OR you pressed it wet?
@ATeePrint
2 жыл бұрын
Again I appreciate you watching my videos! 🙌 Normally I used the flash, And what I do is a print flash and then cure. Not wet on wet.
@jocelynaragon2598
2 жыл бұрын
I’m using Fn ink plastisol ink I’m drying it with heat Gun for 2 min 4-5 Inches away and ironing it 260 5 secs are they cured the way I’m doing them
@ATeePrint
2 жыл бұрын
As long you don't see cracking on the ink you are good. But if you are going to be curing with the heat press, all you have to do is hit it a couple seconds with the heat gun and then do 10 to15 seconds on the heat press you should be good 👍
@jocelynaragon2598
2 жыл бұрын
Thank you so much 😊
@zachwhite9854
2 жыл бұрын
What for pressure is used for heat press
@ATeePrint
2 жыл бұрын
I'll say medium pressure. Thank you for watching!
@froger76
7 ай бұрын
Can you heat press straight from a print with wet ink?
@SamuraiUploads
6 ай бұрын
Do you use plastisol or water based ink? And if I use heat press to cure water based should I do 320 20 seconds or longer? Thanks!
@michaelkozia7275
2 жыл бұрын
Good morning m America. Hope am not disturbing....I rely wont to have a glucy look. With the parchment paper a did get indid a flat nice print look. If a get teflon sheet well it look more glucy. Does any teflon is good. Or there is a specific one.thanks.......Mike from Belgium
@ATeePrint
2 жыл бұрын
Yes I believe with the Teflon sheet you will get a more glossy look.
@socialillztv7084
2 жыл бұрын
What kind of heat press are you using?
@ATeePrint
2 жыл бұрын
I have the Ricoma 16x20. It is a great heat press. This he pressed Auto opens, it has a digital pad, You can set up your own presets and have them ready for different jobs, And the plate slides out. I have a link to that heat press here it is 👇 shop.ricoma.com/?referral=angel-santos
@maksymveres422
2 жыл бұрын
Thanks, good video! What about white ink on black t-shirt/ will the time of curing increase?
@ATeePrint
2 жыл бұрын
Thank you for watching! I do the same time for all inks.
@quantumprimate3700
2 жыл бұрын
Thx .... water based ink?
@ATeePrint
2 жыл бұрын
Plastisol ink Thank you for watching!👊
@esrhime305
2 жыл бұрын
Thanks mate! Good video ✨✨ Can I still press the t-shirt after being flashed?
@ATeePrint
2 жыл бұрын
Yes
@SereneRaye
Жыл бұрын
What pressure are you using for the press? And how long are you pre cutting with the heat gun before pressing?
@ATeePrint
Жыл бұрын
Medium pressure, And with the heat gun you want to do it for a couple of seconds until the ink is dry a little bit, And then you cure it with the heat pressed.
@nicholaslozado7861
Жыл бұрын
What did you get your screen print stand ? I can’t find any with good reviews.
Пікірлер: 60