I've included extra details here because KZitem hates long videos and I'm finding more and more I need to keep them short. Please let me know with a comment if you find this useful! Some tricks for working with spreading casting plaster: • I mixed small amounts at a time so it didnt set on me too quickly. • For the first layer I used a 2:1 mix of plaster to water, both to make it tougher and a bit thicker initally for filling up all the tin foil gaps. • When I went back with the second layer I used a 1:1 mixture, pretty watery because it'll set faster when contacting the layer underneath. This doesn't need as much brushing, it'll flow into the texture pretty well on its own, the main goal is just to make sure it doesn't pool anywhere. • It can sometimes separate a bit when left to sit while you brush a bit on, so it's worth stirring the pot each time you get a fresh bit on your brush. • Lather it over the tin foil as quickly as you can, thick as you like, and use the brush to spread it across the stalagmite until both the tin foil is covered and you can see the texture beneath. • Cleaning and drying the brush with a FRESH water pot after every few brushfuls is important, or the leftover plaster in the water seems to cause the new plaster to dry near instantly. This also stops the plaster from setting IN the brush. You only need a fresh pot every time you mix up a new batch, but you could use a new pot each time you wash the brush by having a row of plastic cups with fresh water in each - it can only help :) • Bear in mind that the second coat will set faster than the first because it's going over other plaster, so keeping the mix thin and working quickly is advised. Don't worry too much about preserving the texture completely once in the second stage, it will get lumpy and covered in places, but that's part of the stalagmite look, don't worry about it. Is this a bit fiddly to work with? Yes. But it gives awesome results. You can use BMCs caulking mix from his recent underdark terrain video, but I found I didn't like the texture as much, and honestly I found it fiddly in other ways. Like trying to get a thick enough protective layer without either leaving brush strokes or leaving it a formless blob. It's good stuff, but I personally didn't like working with it, at least without more time to experiment with its features. Props to BMC for the creation though, it's definitely interesting. More details on how to make bridge/edge pieces: • To make these I cut some shapes from foam, and trimmed them down to 3/8" thick with the hot wire table, so they line up with a floor tile. • For the corners I took some 3" wide foam, and sketched on a rough semicircle that doesn’t stick out too much, which I hoped would line up when connected to the tile at the top… • For the bridge I just took a 6" long, 3" wide piece of foam and cut wibbles into the edges. • For all of the wibbly edges I took an exacto knife and cut the underside down a bit, just like I did for the other cave tiles but more so. • Once that was done I used them as a stencil to draw and cut out two chipboard pieces to fit the bottom, cut a 1" wide, 1/2" deep slot out of the flat edge of one of them (on both sides, for the bridge), and tacky glued that to the bottom, with the other stencilled bit on top. Then you just need to trim the card down with a sharp knife. • I textured the flat tops with the caveman technique, and used tin foil on the underhanging bits of foam to make the cuts look more rounded and natural. • Finally I made more stalactites for the bottom, hot glued them in place firmly and used modelling compound to cover the card and hot glue on the undersides, and then casting plaster to cover the stalactites. They're pretty much a weird shaped floor tile with stalactites on the bottom, but hopefully this detail helps if you wanted to make them yourself and had questions :) Details on the leopard spot technique: In general: • Make sure the mix is thin and watery, you want the colour to be faded. This way you can dab over bits you;ve already painted for stronger colour. It's easy to add paint, impossible to take it off… • Cast up some text pieces, whether that’s plaster rocks or lumps of tin foil covered in plaster to test your mixes on before using them on your main piece. These mixes can be a bit like cooking, and you want to check you're happy with the result before using on your hard work! On the rocks: • I used a 50/50 yellow ochre to tan mix to get the base colour of more sandy stone, which is dulled down by the final colour and I used in fairly large patches on the less sharp rocks that looked more sedimentary. • I used some burnt umber ( a reddish brown) in the cracks of the sharper rocks, I was trying to imitate seams of iron or other minerals. This one I thinned down about half as much to get a much richer colour. • I coated the whole thing in a mix of 50/50 black and tan, over both of the other colours to blend, shade and tone them down, as well as across the rest of the piece that wasn’t yet painted. On the stalagmite • I used a 3:1 tan to yellow ochre mix for the whole thing. • I then gave the whole thing a wash of 1:1:2 black to tan to medium grey, which I layered on a few times at the bottom to blend it better into the tile. • I changed up the mixture here because the casting plaster seemed to get different colours (more brown) when layered over tin foil, so I adapted a bit. It still came out more yellow thanI would have liked, if I was going to do it again I might drop the yellow ochre completely and just do a layer of thinned down tan. Details on adding dirt to mountainblocks: • I generally tried here to sprinkle it into cracks from an above angle for the square blocks, and for the sloped blocks, at an angle from above that more or less worked whether it was on its side or standing upright. This is just personal taste! Matt varnish: • This won't seal in a thicker layer of dirt, but for the dusting I did it works well and darkened down the dirt and blended it a bit better too. • I would use some newspaper to cover the plaster bits, my rocks seemed to frost up quite badly, possibly something to do with how cold they are. • I just held up some newspaper curved around them for later pieces and sprayed piece by piece, which solved the problem. The paint is soaked into the plaster anyway, so it doesn't need a varnish in the same way.
@MarcusBeirne
3 жыл бұрын
I love the idea of using the bridge as a low level bridge with dark and spooky stalligtites. Very atmospheric!
@RPArchiveOfficial
3 жыл бұрын
I know right? I did that for the B roll footage and immediately loved it 😅
@DungeonMiser
3 жыл бұрын
I love the limestone color of your cave. It shows you did your research
@RPArchiveOfficial
3 жыл бұрын
Thanks man, I spent a while trying to get the look down, I think it was worth it though :)
@Hepabytes
3 жыл бұрын
Man this reminds me of the magic in those early youTube crafting videos that I haven't seen in a long time. Godspeed.
@RPArchiveOfficial
3 жыл бұрын
Wow, high praise :) thanks JP.
@WraithDesignz
3 жыл бұрын
When tabletop goes Neverwinter Nights, Life comes full circle.
@cheezunriceramen8995
3 жыл бұрын
Of all of the handcrafted tile types I've seen, yours are by far the best looking. As an engineer, I'm impressed with the construction and building. You're attention to detail while still maintaining flexibility and modularity is astounding. Once again, very well done.
@RPArchiveOfficial
3 жыл бұрын
Thank you so much man, if I'm impressing engineers I'm doing something right 😅
@pollytheparrot46
3 жыл бұрын
This channel needed to be in my life. Why was the algorithm force-feeding me Blackmagic Craft but just today decided to show me this? Totally bonkers.
@NatesMiniatures
3 жыл бұрын
Freaking amazing build mate!
@RPArchiveOfficial
3 жыл бұрын
Thanks Nate!
@norcalonline1
3 жыл бұрын
Pure evil genius. Thanks for sharing. Cheers, --Bo
@RPArchiveOfficial
3 жыл бұрын
Thanks Bo :)
@bom.6658
3 жыл бұрын
I've never seen someone with my name spelled in the same way - Also a Bo
@MattJames5627
3 жыл бұрын
Wow, just wow ... I'm probably sounding like broken record by now but your work is just breath taking :)
@RPArchiveOfficial
3 жыл бұрын
Hey, the comment is always appreciated Matt! :)
@Forinsyther25
3 жыл бұрын
This is out of this world amazing 😲
@RPArchiveOfficial
3 жыл бұрын
Thank you! :)
@RaiderAvian
3 жыл бұрын
GREAT TIMING! I planning on making a cave encounter. THANKS!
@RPArchiveOfficial
3 жыл бұрын
Happy to help 😅
@BillAllanWorld
3 жыл бұрын
Your work is amazing. You should be inducted as one of the Guildmasters of the Tabletop Crafters Guild.
@RPArchiveOfficial
3 жыл бұрын
Thank you Bill, honestly that's awesome to hear :) not sure if that will happen at any point but it would be cool!
@NorthoftheBorder
3 жыл бұрын
This stuff is awesome, and I love how modular this all is. However, having started making my own videos, I'm absolutely blown away by the production values of the video itself!
@RPArchiveOfficial
3 жыл бұрын
Hey thanks man! I try to make the most of each video :)
@AleksanderNevskij47
Жыл бұрын
Yeah, but there are a lot of black lines everywhere and that's very ugly, don't you think?
@xraystyle8893
Жыл бұрын
huh only 6 likes
@AleksanderNevskij47
Жыл бұрын
@@xraystyle8893 What did you expect?
@xraystyle8893
Жыл бұрын
@@AleksanderNevskij47 more I guess it is notb after all
@patrickmasse7159
3 жыл бұрын
I prefer short video (30 mn). I am always surprised by your creativity : stalagmites, bridge etc. Super !
@RPArchiveOfficial
3 жыл бұрын
Thanks Patrick! KZitem prefers them too, so it's likely they will continue and I'll find other ways to make the tutorial detailed :)
@conanthebarbarian4996
3 жыл бұрын
Another great addition to the system so many adventure ideas here I also split open tiles adding skulls bones and sometimes blood or small water pools to cracks which works well with all the stalagmites since its water that's what makes them.
@RPArchiveOfficial
3 жыл бұрын
There's something appropriate about your username and enjoying using the skulls of your enemies... 😅
@JeffDrennen
3 жыл бұрын
Awesome job on the stalagmite.
@RPArchiveOfficial
3 жыл бұрын
Thanks man, I'm pretty happy with how it turned out.
@MrFaide
3 жыл бұрын
That's brilliant! Thanks for posting this
@RPArchiveOfficial
3 жыл бұрын
Thanks for commenting :)
@rizen_89
3 жыл бұрын
Amazing, looks so natural. You're talented 😎
@RPArchiveOfficial
3 жыл бұрын
Thank you! I was definitely going for a more natural look so I'm happy it worked out :)
@juancarames2379
3 жыл бұрын
This looks nuts
@RPArchiveOfficial
3 жыл бұрын
Thanks Juan :)
@JohnSmith-qe6fb
11 ай бұрын
The stalagmites are amazing and really makes the caves come to life. You rock!
@ProfessorCharlesPorterfield
3 жыл бұрын
Simply amazing! What a fantastic set of builds and as always perfectly modular. You're a wonder sir! Cheers!
@RPArchiveOfficial
3 жыл бұрын
Thanks Prof!
@MrDmmagic
3 жыл бұрын
These videos are amazing! I can’t wait to see what’s next!
@RPArchiveOfficial
3 жыл бұрын
Thanks man! Keep an eye out, it won't be next week but should be soon after ;)
@DUBLEGAMINGIL
3 жыл бұрын
This looks so so good!
@RPArchiveOfficial
3 жыл бұрын
Thanks man!
@wrath3470
3 жыл бұрын
I am very happy to have discovered this channel, very helpful and inspirational as long as you don't eat the magnets!!!
@RPArchiveOfficial
3 жыл бұрын
Oh very true! I'm well aware, they come with safety labels where I live :)
@wrath3470
3 жыл бұрын
@@RPArchiveOfficial So I read on the comment section of another one of your videos!
@jakkopka
3 жыл бұрын
Great job sir. My game has gone digital and so my desire and drive for crafting has tanked. But your stuff sparks the inspiration for me.
@RPArchiveOfficial
3 жыл бұрын
Happy to help :) crafting can help with digital play too, you just need to be clever with the webcam placement 😅
@BGPHughes
3 жыл бұрын
Another good one - keep it up!
@RPArchiveOfficial
3 жыл бұрын
Thanks man, will do!
@cavemanworkshop
3 жыл бұрын
1:00 Alternatively, after you glue your chipboard squares into the corners, you could take the tile back to the Hot Wire cutter to cleanly cut out the remaining space between the chipboard instead of using the X-acto Knife. Great video & great improvement to the methods! I can’t wait to try this out myself!!
@RPArchiveOfficial
3 жыл бұрын
Also yes. The reason I didn't was to get a more ragged, natural, less square look. The hot wire would work great for the man-made style tiles like stone or wood though :)
@irongryphon
3 жыл бұрын
Nicely done mate, These are great. Was looking to do something like this myself for my own channel, but I'll have to find another way now 😅👍🏻
@RPArchiveOfficial
3 жыл бұрын
Haha thanks man 😅 Nice work on that rickety bridge btw!
@krgood9008
3 жыл бұрын
U can use nail polish to melt cracks instead of cut to give a smooth eroded look for puddles
@RPArchiveOfficial
3 жыл бұрын
True, but then I feel it looks more like melted stone than cracks, that's the main reason I didn't :)
@RollforDamageRFD
3 жыл бұрын
Very nice work!
@RPArchiveOfficial
3 жыл бұрын
Thanks man!
@ModellismoFantasy
3 жыл бұрын
Nice idea to use aluminum foil! Great work ;)
@RPArchiveOfficial
3 жыл бұрын
Thanks man! I really like some of your builds too :)
@FacilityD20
3 жыл бұрын
Hey, just found your channel though Reddit, and subbed as I also have a table top gaming channel as well. Great content. I will be taking notes, you have a great filming methods.
@RPArchiveOfficial
3 жыл бұрын
Thank you man :) it's always nice when the filming effort gets noticed.
@FacilityD20
3 жыл бұрын
@@RPArchiveOfficial Its very well done, I know that it takes a lot of effort to film that well, it's as much work as the project. I am trying to take more time to film my projects, but alas life gets in the way. Looking forward to more of your videos, not just for the awsome work, but also for filming inspiration.
@RPArchiveOfficial
3 жыл бұрын
Oh I know that feeling. I think time is my most limited resource...
@osareafallire
3 жыл бұрын
Amazing dedication to detail. I want to see some game play video with this stuff.
@lexzbuddy
3 жыл бұрын
This is really good.
@Nat1videos
3 жыл бұрын
Very cool 👍
@RPArchiveOfficial
3 жыл бұрын
Thanks! :)
@JeffDrennen
3 жыл бұрын
For your under dark theme you could always use UV reactive paints as well.
@RPArchiveOfficial
3 жыл бұрын
Very true, though that can limit their use in other environments if it messes with the colour scheme
@seangere9698
2 жыл бұрын
The connect one (big one) is called a column. Once a Stalagmite and Stalactite touch they become a column.
@FloridaManVal
2 жыл бұрын
Excellent work
@grafikal100
3 жыл бұрын
How the heck did I only just find this channel. Dang, these are so good.
@RPArchiveOfficial
3 жыл бұрын
Thanks man :) plenty more around the channel 😅
@bomberman64rodriguez41
3 жыл бұрын
Great job man wow
@RPArchiveOfficial
3 жыл бұрын
Thanks man :)
@cheeseymann
3 жыл бұрын
From the guy that brought you fully modular dnd tiles of all sorts and developed a magnetic fully modular tabletop/sector terrain design. We present. Scatter terrain permanently attached to your tiles
@lexzbuddy
3 жыл бұрын
Also, foam adhesive, and suggestions for something cheap? Gluing two bits of blue foam together for instance. Something that will also let you use your hot wire cutter with after it has set/dried. My wife does the foam crafting and I do the resin/FDM 3d printing. So, it's really for her use but she asked me and now I am asking you... because I really don't have a clue.
@RPArchiveOfficial
3 жыл бұрын
Black magic craft did a full video on this some time back, but I can't for the life of me remember the result! Might want to check that out :)
@lexzbuddy
3 жыл бұрын
Just had a look and found that video, thanks :) Everbuild Fill & Fix Expanding Foam 3M Super 77 Multi-Purpose Spray Adhesive Gorilla Heavy Duty Construction Adhesive
@Raycheetah
3 жыл бұрын
This was actually the second of your videos I watched (your most recent video, "Flat, Hovering Roads Suck," was the first to show up in my recommendations), and remains among my favorites. I love gnarly, free-from cavern decor, and I hope one day to recreate an area from one of my very earliest dungeons, a suspended bridge over a yawning chasm infested with pterodactyls. Great inspiration, here! =^[.]^=
@eiloccorb2797
3 жыл бұрын
This is how Wyloch does his tiles as well.
@RPArchiveOfficial
3 жыл бұрын
I credit him in a much earlier video :) I've since moved on from card tabs, though they are still an option. I prefer the ease of use of magnets 😅
@andytate5670
3 жыл бұрын
these are great! unfortunately, no one has ever asked me to do tiles, I would like to have a go ( although not keen on magnets much prefer the barbecue or cocktail sticks technique) I use that exact method to make stalagmites it's a great, you can also mix modge podge and baking soda into a paste it dries very quickly. I also use Luke's stuff it is great. I love all the hanging down stuff they look really good
@RPArchiveOfficial
3 жыл бұрын
Thanks Andy :) why not just do some for yourself? They make a cool modular background for mini display if nothing else 😅
@andytate5670
3 жыл бұрын
@@RPArchiveOfficial I will probably get around to it but I've got such a lot of projects on at the moment and I'm working from home too As our shop is closed until March So my kitchen and my spare room is full of terrain projects and my kitchen is my work shop which is not ideal.
@RPArchiveOfficial
3 жыл бұрын
Ah, fair enough!
@MR-on9yx
2 жыл бұрын
These look awesome dude! Can you please tell me how many tiles of each type did you make to build the scenes in this video?
@RPArchiveOfficial
2 жыл бұрын
I believe there's a list of recommended tile amounts in the recent getting started video? Either in the video or in the pinned comment probably :)
@kayura77
3 жыл бұрын
I love the column 💖 because that method of crafting them is awesome, and because: STALACTITES OF DOOM that one can hang off the top of the column. Because those can very easily be removed to show them "falling off" when the 7 INT bard inevitably talks someone into casting thunderwave in the cave system...
@RPArchiveOfficial
3 жыл бұрын
haha! brilliant idea!
@cheezunriceramen8995
3 жыл бұрын
@@RPArchiveOfficial not just removable, but you have a thin chipboard "tile" on top of the bridge section with magnets or possibly skewers that correspond to specific stalactites below, holding them in place. The party triggers them however you decide and you simply lift the chipboard holding them in place and the loose bits actually fall on the players. Now they have damage AND new scattered bits for rough terrain that literally wasn't there before.
@RPArchiveOfficial
3 жыл бұрын
I've been considering something similar (though not the same) for a while now, definitely sounds interesting!
@AzraelThanatos
3 жыл бұрын
Are those the new Wargames Atlantic spiders in the last part of the video?
@RPArchiveOfficial
3 жыл бұрын
Actually just wizkids phase spiders :)
@Failypso
2 жыл бұрын
How did this channel never get recommended to me until now? BAD ALGORITHM!….. Here now!
@RPArchiveOfficial
2 жыл бұрын
Hey, look at it like you've got plenty built up to explore 😂
@Failypso
2 жыл бұрын
@@RPArchiveOfficial True! (And you’re replying to comments to 1 year old video’s? Go you!)
@RPArchiveOfficial
2 жыл бұрын
I always try to reply to comments :) at least for as long as I can, it's getting harder 😂
@cazhalsey8877
3 жыл бұрын
What about melting small bits of wax for stalagmites? I would love to see the results of that
@RPArchiveOfficial
3 жыл бұрын
Sounds interesting! I'd imagine it would end up more or less like the hot glue technique, but maybe a little more subtle? Painting might be an issue though, durability too!
@eltrox1
2 жыл бұрын
The only thing missing on your builds are headmounted cameras for the PC minnies and VR glasses...🤯
@RPArchiveOfficial
2 жыл бұрын
Search 'probe lens' on KZitem. Someday... 😂
@Salazaris
3 жыл бұрын
there is a foamsave zapp!
@RPArchiveOfficial
3 жыл бұрын
Orly? I must investigate...
@Salazaris
3 жыл бұрын
@@RPArchiveOfficial its called Zap-O foam
@leonmckoy7632
Жыл бұрын
I’ve got to ask, what did you use to pile the cave tiles on for that stepped part? It add variety to the terrain that I just have to have.
@RPArchiveOfficial
Жыл бұрын
Just more floor tiles, the taller bits I used mountainblocks/eps 3" stacker blocks :)
@lexzbuddy
3 жыл бұрын
Where did you get the spiders at the end? I really like them.
@RPArchiveOfficial
3 жыл бұрын
Wizkids unpainted phase spiders :)
@lexzbuddy
3 жыл бұрын
Cool, many thanks :)
@jacobhope6164
3 жыл бұрын
😱!!!!!!
@RPArchiveOfficial
3 жыл бұрын
It's a good sign when I've reduced you to an emoji 😅
@iamerror7392
3 жыл бұрын
Where in the world can you buy 3" thick gray xps? I can't seem to find it anywhere!
@RPArchiveOfficial
3 жыл бұрын
There's a US link to an online store that stocks 3" foam in the equipment list in the description :)
@samsowden
3 жыл бұрын
Kiev terrain :D
@dubbydapanda7189
3 жыл бұрын
where do you get your spider minis?
@RPArchiveOfficial
3 жыл бұрын
Wizkids unpainted phase spiders :)
@aleksandrkuziakov9266
3 жыл бұрын
I came across this video and stole all the ideas. At least I left a like in return.
@RPArchiveOfficial
3 жыл бұрын
and commented ;)
@Dvinven
2 жыл бұрын
Aint nobody got time for that, use graph paper and a marker. :D
@stuartfarrell6729
3 жыл бұрын
step one make many 3 x 3 tiles step 2 make many 3x 3 x 3 cube bocks
@KevorkianDoctor
2 жыл бұрын
Can I commission these?
@RPArchiveOfficial
2 жыл бұрын
Unfortunately not, I'm perfectly happy to help you learn to make them yourself though :)
@MrDmmagic
3 жыл бұрын
It's been too long since your last video!
@RPArchiveOfficial
3 жыл бұрын
Basically these recent ones have been taking longer because there's more work in each one :) Well, that and I've been trying to work a healthy amount and not 80+ hours a week just to get a video out each week I was happy with 😅 At this point I'm leaning towards releasing videos 'when they're ready', but still aiming for several a month!
@andywolf3205
3 жыл бұрын
Where subtitle ? :(
@RPArchiveOfficial
3 жыл бұрын
Sorry man, I haven't quite got those sorted yet :/ it's on my to-do list, believe me. Should be easier with shorter videos. Problem will be how to do them for the notes built in to the video... Something I'm yet to figure out :/
@AleksanderNevskij47
Жыл бұрын
Your terrain is full of black lines! Have you noticed?
@trashymctrash5175
3 жыл бұрын
BMC has nothing on this guy
@MarcusBeirne
3 жыл бұрын
The new method you demonstrate for creating the locking mechanism on the base is very similar to how Wylock crafts his bases. Inspiration or coinkidink? I assume inspiration as there is a lot of cross pollenation among crafting DMs.
@RPArchiveOfficial
3 жыл бұрын
Oh it isn't new, I've been using it since the start where I credit wyloch properly in a video I always make a point of doing that :) I've been using it for a while now so the credit isn't in every video anymore or that would gets repetitive quickly!
@DokuroHeartvore
2 жыл бұрын
How i can buy those skulls?
@RPArchiveOfficial
2 жыл бұрын
Citadel skulls pack :)
@midnightishi1059
Жыл бұрын
I'm sorry but how does the tiles connect with those card tabs I wanna build using cardboard since it's by far the most materials I have currently
Пікірлер: 143