Flat Roof Installation DIY on a Garage, Shed, or Commercial Roof. This method is for anyone with a slightly slanted flat roof who needs to recover it. If installed correctly, this rubber roof will last 20 -30 years.
#flatroofrepairs #roofrepair #chimneyrepair
Shopping list for Flat Roof Installation DIY, Garage, Shed
- Peel and Stick Rubber membrane Cap Sheep (any brand)
- Peel and Stick Base Sheet
- Karnak 81 or 66 Adhesive Trowel Grade
- 1 gal of Turbo Poly Seal by Bergstromm.com
- 1 Roll of Polyester fabric
- Lacquer Thinners where necessary
Tools Required for Flat Roof Installation DIY, Garage, Shed
- Disposable brush
Utility knife with straight and hook blades
- Small Propane Torch
- Bullnose Towel
- Scissors
- Stirring stick
- Garbage bag
- Dolly
- Rags for cleaning
Watch this video On how to Repair leaks on an EPDM Rubber Roof - • Why EPDM Rubber Roofs ...
Turbo Poly Seal at bergstromm.com/
Applications where Super Silicone Seal is used: • Use this Flat Roof Coa...
Application where Turbo Poly Seal is used: • Anyone can Repair a Me...
Videos on Repairing Metal Roof leaks: • Metal Roof Coating gon...
Repairing Chimney leaks: • DIY Chimney Leak Repai...
Skylight Leak Repairs: • Skylight leaking due t...
Channel: www.youtube.com/ @FlatRoofDoctor
1. Materials: Any roof brand peel-and-stick cap sheet and peel-and-stick base. Roofing nails, Karnak 81 or 66 Trowel grade adhesive.
2. Preparation: Sweep or blow the surface clean of dust and debris. Make sure it is dry.
3. Installation: Install over any surface. Starting from the bottom, install new metal edging, install the base over the entire surface, and then install the cap sheet starting from the bottom. Use Karnak to seal edges and end laps if the roof pitch is too low.
4. Tools: Utility knife with regular blade and hook blade, Hammer, Optional - small propane torch
Turbo Poly Seal - bergstromm.com/
FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post.
Chapters:
0:00 Quick, Cheap, Easy Roof
0:25 Roof Requirements
2:38 Installing the base
5:59 Installing the Cap Sheet
8:32 Welding membrane to the wall
10:59 Installing membrane around vents
17:00 Securing roof for the night
22:33 Flashing in vents and vent pipes
@FlatRoofDoctor @AllRoof.
Негізгі бет Тәжірибелік нұсқаулар және стиль Flat Roof Installation DIY, Cheap, Easy, Rubber Roof - Carport, Garage, Porch, Shed, Commercial Roof
Пікірлер: 431