Any readon why you think this wouldn't work with a budget planer?
@outlandishbottle9279
Жыл бұрын
@@_Damian_. probably doesn't know about them regardless though getting a planer is useful for projects so if you have the money its worth it
@moldprintsrl
Жыл бұрын
@@_Damian_. cheap planer needs to be adjusted on a daily basis ... salvage
@reistlin7776
4 ай бұрын
Я делал и на дешёвом, надо только доработать дешевый и вполне себе, вдруг фуганка нету, то норм метод
@Brangustx
2 жыл бұрын
Love it. This simple technique is 90% foolproof. With extreme twisted boards I usually let them re-acclimate for a couple days after flattening. Sometimes the board will bounce back to a twist. Some boards just can't be saved, unless they're cut down into smaller pieces.
@shroomatic
2 жыл бұрын
What a brilliant way to untwist. I never thought about this, thanks. I'll try it!
@JohnBuildsIt
2 жыл бұрын
🙌🏼🙌🏼
@nikdraven
2 жыл бұрын
Lowes should do this with all their lumber.
@freedomconstruction
Жыл бұрын
Actually ok believe they do, it just warps after they do it 🤷
@SEBTECHDIY
2 жыл бұрын
Nice trick, now i just need a planer! 😅
@iainarthur7713
2 жыл бұрын
Great simple demo demonstration, I also now just need the £5,000 for the planer ;)
@jbonegw
2 жыл бұрын
😃
@skythunder4413
2 жыл бұрын
You could do this with a hand planer and a good hand. Thank you for uploading
@dengshomeinvasions1273
2 жыл бұрын
@@iainarthur7713 get a thicknesser from Makita I thought they were only around $800?
@iainarthur7713
2 жыл бұрын
@@dengshomeinvasions1273 bargain.. ;)
@CenPapi
2 жыл бұрын
Sweet technique! How much overall thickness did you lose on that board?
@JohnBuildsIt
2 жыл бұрын
Just over a 1/4”
@charliejohnston5334
2 жыл бұрын
This technique is time-proven for lumber too big for jointer. Keep in mind you must have a dead flat workshop table and sled to make it work. Thanks for sharing.
@michaelbuchanan2662
2 жыл бұрын
Awesome
@john-paulsilke893
2 жыл бұрын
This man loves that board.
@JohnBuildsIt
2 жыл бұрын
Some expensive stuff right there haha
@johnwarwick4105
2 жыл бұрын
Clever. Never too old to learn a new trick
@anitapacheco8890
2 жыл бұрын
Some of the building vids are super and give you great ideas and info thank you.
@creation80graphics49
8 ай бұрын
Trying this tomorrow!!!
@countrylife9763
2 жыл бұрын
Genius man Very smart and fast
@AltexIndustries
Жыл бұрын
Wow! How awesome!
@dangrimes5078
2 жыл бұрын
This is a machinist technique. We do this all the time on a surface grinder or milling machine to get something flat.
@Historyprepares
2 жыл бұрын
Excellent idea
@joeortiz3455
2 жыл бұрын
Cool beans that is quite genius
@ZussieMakesit
2 жыл бұрын
Now, if I just had a planer! …
@louierivera871
2 жыл бұрын
Nice. Love it
@deanauguste544
2 жыл бұрын
Ok John you're the man!
@JohnBuildsIt
2 жыл бұрын
Haha thanks man!
@pierorepole4775
2 жыл бұрын
Ciao bravo good job 👍🤠
@josekacv0420
2 жыл бұрын
Just brilliant 👏 👌
@JohnBuildsIt
2 жыл бұрын
🙌🏼🙌🏼
@thepokelax
2 жыл бұрын
Genius!! Never thought of this
@JohnBuildsIt
2 жыл бұрын
👊🏼👊🏼
@jorge45497
2 жыл бұрын
Thanks for teach this trick.
@JohnBuildsIt
2 жыл бұрын
👍🏽👊🏼
@renecervantes6944
2 жыл бұрын
Great idea!!
@OR-sh5nf
2 жыл бұрын
8th grade woodshop tnx for the memories 👍
@JohnBuildsIt
2 жыл бұрын
Definitely a class they need to put back in schools!
@johnkovitch550
2 жыл бұрын
That… was sweet! I love woodworking.
@JohnBuildsIt
2 жыл бұрын
🙌🏼🙌🏼
@chevybigblock3311
2 жыл бұрын
Awesome 👍👍
@garydergut4741
2 жыл бұрын
Good job
@davidfredman1749
2 жыл бұрын
Interesting idea
@luispenarojas3440
2 жыл бұрын
Oh, Yes... 👍👍
@JamesJones-yt8df
2 жыл бұрын
Very nice 👍 like the way you think
@jtf2413
2 жыл бұрын
Great idea! I'm curious as to how much was lost during planing?
@JohnBuildsIt
2 жыл бұрын
.25”
@facts_people-n
2 жыл бұрын
Skills.
@alantripp6175
2 жыл бұрын
Nice tip.
@JohnBuildsIt
2 жыл бұрын
👍🏽👍🏽
@demarco916
2 жыл бұрын
Now that board is not the same dimension as the others. Great for single board. How much does it take off?
@JohnBuildsIt
2 жыл бұрын
They were all still needing to be taken down to final thickness anyway. How much depends on how bad it is
@jerrodbates8480
2 жыл бұрын
As much as that first shim he put under it
@zas5892
2 жыл бұрын
But does that make the board Square end to end top-to-bottom edge-to-edge at all corners or does it just make it smooth top and bottom no matter whether you flip it over or not on a flat surface
@JohnBuildsIt
2 жыл бұрын
The edges still need squared up on the jointer and table saw
@NIESYSTEMATYCZNY
2 жыл бұрын
Genius
@sloeryd
Жыл бұрын
How do you keep that sled flat? Every piece that long always warps on me.
@thomasznidericz6385
2 жыл бұрын
What do you think the longest you could put through the planer? I have a dw733 and am wondering if it would manage to do a 7 foot board this way 😅 I have a couple of rollers that could go each end to help with the weight
@JohnBuildsIt
2 жыл бұрын
As long as you have support, the length shouldn’t matter
@jefflashmett5505
2 жыл бұрын
Nice!!!
@cwood221
2 жыл бұрын
Very amazing
@Framer_Mike
2 жыл бұрын
Yeah... imagine that on the Frame! 🤣 🤣
@Framer_Mike
2 жыл бұрын
I can untwist it with nails.. 😆 🤣 get it... wall stud 5 nails... bdum tiss
@chrismudd9342
2 жыл бұрын
Thanks, I had always wondered about doing it that way!
@frankthetank8749
2 жыл бұрын
Nice..
@Scrambler85
2 жыл бұрын
I shop at the box lumber stores. What is a flat board🤔
@JohnBuildsIt
2 жыл бұрын
Man you gotta quit that! Haha find a local supplier
@andymaciver1760
2 жыл бұрын
I use a joiner for this but cool trick!
@Zcalicer
2 жыл бұрын
It’s probably best with longer pieces
@MrKevhead
2 жыл бұрын
Sweet
@Maxjr9292killer
2 жыл бұрын
Nice
@grabneverdied2004
2 жыл бұрын
👍👍👍👍👍
@ramonching7772
2 жыл бұрын
Did it twist again after a while?
@JohnBuildsIt
2 жыл бұрын
This one hasn’t. But definitely possible sometimes
@ramonching7772
2 жыл бұрын
@@JohnBuildsIt Mine did. So I now basically follow another YT advise. Cut it short and slender.... And use it as firewood. 😁😁😁😁😁
@ramonching7772
2 жыл бұрын
@@JohnBuildsIt Still, a great idea. I used this technique on metalwork. It worked. Thanks. 😊
@ramonching7772
2 жыл бұрын
@@JohnBuildsIt Now that we are talking about it. Maybe if it is ripped into narrow lumber, the problem would not be very evident. Ex: from 2x6 or 2x8, rip it into 2x2s. Thanks for the video. It's fun and leads to good things. 👍👍👍
@JohnBuildsIt
2 жыл бұрын
@@ramonching7772 ripping the board in half, squaring each one up and then glueing back together is another technique I’ve used a lot
@KyleS860
2 жыл бұрын
Was it too wide for the jointer behind you?
@JohnBuildsIt
2 жыл бұрын
Yea, and too long to get good results too
@PatHaskell
2 жыл бұрын
“Planing a twisted board.”
@JohnBuildsIt
2 жыл бұрын
Yea it was “flattening a twisted board” at first and got no views haha playing the KZitem game unfortunately
@zas5892
2 жыл бұрын
So is it perfectly an inch and a half thick at every corner
@JohnBuildsIt
2 жыл бұрын
1.75 but yea it’s all the same thickness
@cliffthompson4149
2 жыл бұрын
You know you can also make an adjustable cradle that you can use on any Twisted board.
@JohnBuildsIt
2 жыл бұрын
This is a rare situation. Don’t have to do this very much
@jodiyoung5578
2 жыл бұрын
Smart
@pinballjunky7117
2 жыл бұрын
It all depends on how bad the twist is. That looks like quarter inch. Any more, after it's planned down, you have a three quarter inch board..
@JohnBuildsIt
2 жыл бұрын
Correct, although a bit of an exaggeration haha
@dishinthkushal9233
2 жыл бұрын
Wow!!
@lindaburt6518
2 жыл бұрын
That is so awesome. Thanks for sharing.
@deplorable-0ne
2 жыл бұрын
Now that's some "NAPA knowhow"!
@JohnBuildsIt
2 жыл бұрын
😂😂
@jcluttrell
2 жыл бұрын
How much did you lose?
@luisgamez9941
2 жыл бұрын
Well yeah if I had a nice shop and planer like that.
@youssefamjad7279
Жыл бұрын
good
@sh115067
2 жыл бұрын
We had a joiner in our high school cabinet making shop. That thing was amazing at making a board square. Probably a $20k machine tho
@richardshermanjr1899
2 жыл бұрын
The machine was a planer. You can buy a portable one for probably $750.00 or less.
@bradmadeira6807
2 жыл бұрын
@@richardshermanjr1899 they BADASS too.. they even got BATTERY ones..
@scottspropertyservices6877
2 жыл бұрын
Finishes up then realises that the table wasn’t level in the first place🤦🏼♂️😅
@johnkovitch550
2 жыл бұрын
Lol!
@JohnBuildsIt
2 жыл бұрын
That’s why I flipped the board over to show both sides were haha
@johnkovitch550
2 жыл бұрын
@@JohnBuildsIt your comment made me watch it again and bam…as good as the first time I watched. Great job!
@SaintMcFoye
2 жыл бұрын
Imagine the old timers that grabbed Their hand plane, pushed you aside and were like Pfftt I got this...
@JohnBuildsIt
2 жыл бұрын
They have arthritis now😂 haha but yea I use a hand plane if it’s not quite this bad
@CampfireCrucifix
2 жыл бұрын
Why not just run it through a jointer first and then a planer?
@JohnBuildsIt
2 жыл бұрын
Too big
@chrisw7402
2 жыл бұрын
I’m sure you have a jointer, but showing folk how to do it if they don’t. Mind you, considering how big the board is it would be hard to use my small jointer.
@JohnBuildsIt
2 жыл бұрын
I do, and it’s still too big for my jointer as well👍🏽. Some people are having trouble understanding that! Haha
@jackopschmitt5262
2 жыл бұрын
in the past, a distinction was made between right and left turning wood Think aboud it
@colinstace1758
2 жыл бұрын
Don't buy lumber from Lowe's 🤣👍
@flysupertomcat1
10 ай бұрын
Now you tell me! 😒
@lukeb5372
2 жыл бұрын
I thought this was going to be a convenient and cheap way to plane a twisted piece of lumber but I don't have a $4000 piece of equipment
@JohnBuildsIt
2 жыл бұрын
Have done the same thing in a $300 planer. Or by hand
@sekritdokumint9326
2 жыл бұрын
Just.. use a jointer?
@JohnBuildsIt
2 жыл бұрын
Too big..
@gordonarneson2070
Жыл бұрын
Now your board's a half inch thinner
@JohnBuildsIt
Жыл бұрын
Quarter inch, but yea that’s the point of milling rough lumber.
@georgejungle2255
2 жыл бұрын
Plane and simple
@jondpiatt1
2 жыл бұрын
Why would you do that when you have a jointer right behind you looks like it's wide enough to handle that board
@JohnBuildsIt
2 жыл бұрын
Because it’s not
@thewidowmakergsxr3679
2 жыл бұрын
So just plain it!
@Golfexpertbelieveme
2 жыл бұрын
god i wish i could have you planer and jointer
@deanadidrick1191
2 жыл бұрын
Great job😁
@johncoops6897
2 жыл бұрын
Then simply go and buy them.
@Golfexpertbelieveme
2 жыл бұрын
@@johncoops6897 I’ll get right on that
@adamosantonio1499
2 жыл бұрын
😁. No planer no fun
@maidenlord6663
2 жыл бұрын
Yeah I think I'm just going to get the next board that's flat I'm on a time crunch I ain't got time to do all that
@JohnBuildsIt
2 жыл бұрын
5 minutes is faster than me having to drive an hour round trip and spend a hundred bucks on another 8/4 maple board 🤷🏻♂️
@mabrams8740
2 жыл бұрын
Ya need a board stretcher
@Woodworkingnurse
2 жыл бұрын
So all you need is a 6-10k planer. I’ll grab that from my money tree out back and straighten a whole bunch of boards. 😂🤣
@JohnBuildsIt
2 жыл бұрын
Yep, only possible exactly as I have shown
@Woodworkingnurse
2 жыл бұрын
@@JohnBuildsIt I know there’s many other ways. How about you show one of those. For us that don’t have the thousands of dollars worth of machines. Just saying. Unless you don’t know those ways, then I understand. Your sarcasm is unappreciated. That response kinda comes off as an entitled douche response.
@ratbagley
2 жыл бұрын
Love it.
@scottburnett3328
2 жыл бұрын
And now it’s a different thickness
@JohnBuildsIt
2 жыл бұрын
Yep, exactly the thickness I needed it to be 👍🏽
@dutch-boy
2 жыл бұрын
I just bring mine back to Lowes and get a straight one
@TankGunner84
2 жыл бұрын
Why didn’t you just use that high dollar laguna joiner behind you then run it trough the planner? That’s kinda what it’s for.
@JohnBuildsIt
2 жыл бұрын
Too big..
@eletricalaydner7006
2 жыл бұрын
Muito bom
@johnf3326
2 жыл бұрын
And now its thinner than you wanted it!
@JohnBuildsIt
2 жыл бұрын
What sense would that make? lol. It’s exactly the thickness I wanted.
@alexstrings
2 жыл бұрын
Look at that place! Every mens dream😵
@pinecedar7748
2 жыл бұрын
Or just use that nice jointer in the back.😁
@JohnBuildsIt
2 жыл бұрын
🤦🏻♂️
@heropsycodreamer
2 жыл бұрын
So I'll buy a surface planer and leave it in the back ground for aesthetics
@JohnBuildsIt
2 жыл бұрын
I used the planer. Perhaps you’re referring to the jointer, which isn’t wide enough for this piece.
@heropsycodreamer
2 жыл бұрын
Yes just looked again. I didn't realise how narrow the jointer is In England we use surface planers and they have a wider bed and usually double up as a thickness planer underneath. I see now. He's showing if you can't or don't have a wide enough surface planer. How to take twist out of a board with a thicknesser 👍
@rubenproost2552
2 жыл бұрын
Now without power tools
@RichardRecupero
2 жыл бұрын
What if you table isn't flat? Lol how can we be sure we are flat?
@JohnBuildsIt
2 жыл бұрын
Put a steel straight edge or level on it
@jamesklopotic8646
2 жыл бұрын
Why not run it on a jointer first?
@JohnBuildsIt
2 жыл бұрын
Too big
@Jason-ws3cd
2 жыл бұрын
Now it's a 1x 5 haaaaaaa
@JohnBuildsIt
2 жыл бұрын
Might wanna get to an eye doctor! Lol
@39FORTYWATER
2 жыл бұрын
😁🤭👍🤫ahhhhh
@hotrod76.
2 жыл бұрын
What if u don't have fancy tools.?
@JohnBuildsIt
2 жыл бұрын
Use not fancy tools
@ricklee827
2 жыл бұрын
It's sad that we buy boomerangs now and they cost so much
Пікірлер: 229