💯🍻 appreciate it. Went from no backwash function to working perfect after watching. Somehow a small pebble or shell got stuck INSIDE the housing. Talk about needing pre sediment filters for wells... now it works like new again and I dont have to drop hundreds on kits or complete replacement.
@ditttohead
Жыл бұрын
In all reality you only have to know if you have a filter valve or a softener valve. The softener was available with a "high flow" piston which was nothing more than the standard flow piston machined for two more seconds on a lathe.
@chris.willm5
Жыл бұрын
Hey there, nice video! So I have a 6-yr old 7000 SXT and for the piston assembly, the manual shows three part numbers: a 61452-10, a 61453-10, and a 61452-20. Nowhere on the external valve assembly do I see a part number. Do I need to take this thing apart to figure out which piston model I have? Same issue for the injector assembly…many part numbers shown in manual.
@billyg720
5 жыл бұрын
Thank you very much. Very helpful.
@jmarianu3976
7 жыл бұрын
Thank you for making this.
@GreenMountainDIYGuy
5 жыл бұрын
Excellent video! When replacing all of the O-rings as well as rubber spacers, should one use silicon grease on the these fittings? Thanks!
@WarrenBergstrom
10 жыл бұрын
Very nice video!
@bobreynolds454
10 жыл бұрын
Great video
@kimmie7379
8 жыл бұрын
thank you for this tutorial :o) Very informative.
@manibtech
11 жыл бұрын
good vedio
@aquatell
10 жыл бұрын
Hello - I'm trying to learn more about water softener design and I've read many of your comments on the epic online battles you wage with other water 'professionals'. You seem to know your stuff, and I like your style. I'm interested to get your thoughts on how I can deepen my technical understanding. Thanks!
@smojovi
5 жыл бұрын
What spacer tool did you use? I can only find the $60 one for Fleck 2510, 2700, 2750, and 2900. It didn't say not to use it on the 7000 and it looks the same.
@scotthanrahan4524
9 жыл бұрын
My 7000sxt has "boot' on the screen any idea what this is?
@ditttohead
5 жыл бұрын
12763-10
@MM-sb1gd
3 жыл бұрын
Let's all Pray for Rush!
@danielkishagrissom6910
3 жыл бұрын
Thank you for making the video. Pentair has a video of how to take it apart but not how to put it back together. Answered my question of how to put it back in service by lining up the "s" with the arrow. I did not know what to do until after watching your video. Thx again!!!
Пікірлер: 16