I respect that farmer for not lying about his yield that ticks me off when a guy says he gets more then he is
@drakedart9636
5 жыл бұрын
Maybe he is only getting 90 bpa
@billknoderer8202
3 жыл бұрын
This would be an ideal setup for our popcorn crop! A regular corn head has to have all of the stripper plates readjusted and there’s still head loss due to the small diameter of the ears.
@keithlawlor9993
2 жыл бұрын
Looks just like the adapters that are made to harvest sunflowers .
@robward6354
4 жыл бұрын
another genius idea from saskatchewan
@joescheller6680
5 жыл бұрын
one issue I can see is if your ears are low to the ground it will not work as well but in good standing corn with the ears higher no issues
@badlands555
Жыл бұрын
If you had more than one combine but only had 1 corn head these might be great if you got behind. A new combine today could deal with the extra material I think.
@troyp467
7 жыл бұрын
That's actually quite a neat idea.
@ih1206
7 жыл бұрын
I just seen this today at the Farm Science Review. It's pretty interesting and probably works well in lighter corn. I don't know how well it would work in 200 bushel corn just because of the amount of crop material coming into the combine that is usually pulled through the corn head.
@smylebutta7250
6 жыл бұрын
ih1206 kzitem.info/news/bejne/u46Cmo6AhKqrpaA
@harrythehermit3685
4 жыл бұрын
There is a video floating around and is attached below for 250 bushel per acre. However, the speed of the combine is 2.0~2.1 MPH. That translates to about 1/2 of a similar corn header combine at same yield. Edit: the slower speed is likely due to the crop material being pulled through. I would wonder about the wear and tear of corn fodder passing through such a combine.
@Commissar0617
4 жыл бұрын
@@harrythehermit3685 right, but you're pulling in more width
@harrythehermit3685
4 жыл бұрын
@@Commissar0617 40' for both. Processing all the plant material slows it down. Which is about 2,000 bushel less per hour. Which would depend on the individual farmer's needs, imo.
@Gettyrail
4 жыл бұрын
That is a lot of shaft running in to combine .
@dantecarlostrossero2555
4 жыл бұрын
hello, you can adapt to a conventional head, that is without canvas, thanks (soy de argentina)
@Ben-zh8bx
7 жыл бұрын
Have they tried these same pans in sunflowers?
@crazydog2580
7 жыл бұрын
the web site says Crop type: corn, sunflower, sesame
@wrightfarmshoffman8663
4 жыл бұрын
Great product
@conradodell9251
3 жыл бұрын
It’d be great for switching between soybeans or milo back to corn, except the concaves of course
@curtfunk3500
3 жыл бұрын
Is there a specific reason why he is cutting at an angle vs cutting along rows like normal corn headers do? Would you loose more cobs that way?
@_________________________9790
3 жыл бұрын
This guy games 7000 acres with one s670?
@conradodell9251
3 жыл бұрын
Slow is smooth ,smooth is fast
@farmermatt629
7 жыл бұрын
Try that in 260 bushel corn and machine would be overloaded with plant material... but ok for this corn I guess
@smylebutta7250
6 жыл бұрын
kzitem.info/news/bejne/u46Cmo6AhKqrpaA
@waskele.wabbit717
4 жыл бұрын
I can see it wouldn't work in down corn
@zoinks21
3 жыл бұрын
I believe if you have down corn they said you can mount their crop lifters on the front of the pan. Snaps in. That’s what they told me anyways.
@gr82bcrazy1
5 жыл бұрын
That's a good idea for farmers just wanting to get their feet wet. We could have used this on our swather when making sorghum hay.
@tf7274
4 жыл бұрын
140 bu is a good yield depending on what you have put into it. If you put down bare minimum N, lower seed rate and one pass of roundup...140 is good. If you put 400 lbs down, 34k seed rate and 3 passes of Roundup...you better get the rains...and hope for 220+.
@warrencorcoran9824
6 жыл бұрын
I,m missing some thing here, others are too, Corn header for shearing stocks, Correct yes, no ??? Thresher for wheat, grass seed, etc. Why in the world would you use a thresher on corn???? hello, anyone paying attention out there???
@deannelson9565
6 жыл бұрын
WARREN CORCORAN apparently you're the one not paying attention it literally says in the beginning of the video why he's using that header!
@warrencorcoran9824
6 жыл бұрын
Hi Dean, you are right, sort of, I cant hear well, I have hearing loss/ impairment, I watched the video over again, and listened intently, I understand now, heard every word,, great, very informative video,, thanks dean for bringing it to my attention,, I love agriculture, all of its applications,, learning new things,,
@dedrakuhn6103
6 жыл бұрын
for $12,000 he could have bought a very decent used corn header. john deere 843
@paulestrada3003
6 жыл бұрын
Dedra Kuhn exactly my thoughts
@douglaskattau9241
6 жыл бұрын
It didn't look like his corn was planted on 30" rows. May have been put in with an air seeder.
@schwazman1
4 жыл бұрын
Apparently you missed the part where he said a good used corn header is around $40k where he's from.
@vsisindri7968
6 жыл бұрын
how to buy India flexxfinger. how much cost flexxfinger. 12feet cutter bar how many flexxfinger required
@cashwolinski2828
7 жыл бұрын
Yvonne
@christianbabbitt3927
4 жыл бұрын
#downcorn #flatcorn
@blfarms1687
6 жыл бұрын
Why ?
@J-1410
5 жыл бұрын
Now you have a universal sunflower, corn, and other crops header
@conradodell9251
3 жыл бұрын
He really could have borrowed the neighbors header 😂
Пікірлер: 43