Thanks for this easy torturial. I've just flipped my 30 ton jack in maybe an hour, including welding the new plug etc. Way beter for a press than to use all those clumsy return springs etc when using an bottle jack in its original setup.
@TheHomecrafter1988
7 ай бұрын
Nice work brother and thanks
@michaelbyron1166
Жыл бұрын
I love the way you think outside the box to overcome the challenges of not having the exact tools.
@olevo3332
2 жыл бұрын
I love the creativity involved here. Instead of having machines perfect for every type of machining problem, you use standard tools that everybody has to solve problems. This is on the other scale of all the high-gloss high-class stuff you see around youtube where people seem to want to show off all their tools. Well done and thank you for taking the time to document the process!
@TheHomecrafter1988
2 жыл бұрын
Thanks for your kind and motivating words
@MASS1866
7 ай бұрын
Agreed. I get a kick out the “DIY” guy who are all like well first we’re go over to the lathe that everyone has in their back pocket , the well go over to the CNC…. This gentleman is real. At least. I make my own stuff all of the time and still learned a couple things.
@scroungasworkshop4663
Жыл бұрын
Hi Home Crafter, there is a company in Australia that sells hydraulic presses with an up side down jack that they modify themselves. They also change the small pump around so that the pump works on the down stroke not the up stroke like yours. The seals at the top of the ram and the top of the pump need to be in good condition as normally the oil flows down away from them and so don’t leak much but when you turn the jack up side down they are immersed in oil all the time so they can leak. I have had to replace the seals in mine but it’s an easy job. Excellent video and I love your creative solutions to problems. Cheers Stuart 🇦🇺
@TheHomecrafter1988
Жыл бұрын
Good day brother .that is better then my system i will remake my press in the future and i will separate the pump from the ram to use it like yours. thanks 👍
@Ntwadumela1
7 ай бұрын
You don't need to modify anything, just insert the lever from the other side and your pump will work on the down stroke. The Polish company SKAMET also makes such presses with bottle jacks in the reverse position.
@cuttersgoose
2 ай бұрын
You do genius work …I love watching your videos
@TheHomecrafter1988
Ай бұрын
Thanks brother
@oscarvogel2140
6 ай бұрын
I like how he solved the problem of air going to the top. Where the pickup usually is.
@TheHomecrafter1988
6 ай бұрын
Thanks
@MASS1866
8 ай бұрын
This is a great video. I’ve always wanted to open up a hydraulic jack. It’s amazing what you can build out of your own stuff when you have the time and or need for it. Thank you.
@TheHomecrafter1988
8 ай бұрын
Thanks brother
@Hogslice
2 жыл бұрын
I looked for a way to make hydraulic press and your video appeared. Your explanation of how to do things and why you do them is excellent. Your workmanship with limited tools shows your creativity. I like people who troubleshoot and find a less expensive way to do things instead of giving up and buying a tool. Great video! I subscribed and will share.
@TheHomecrafter1988
2 жыл бұрын
Thank you for this kind words 😊🙋
@mehdikaanine-sj7tt
7 ай бұрын
Mm😊
@mehdikaanine-sj7tt
7 ай бұрын
L
@ypaulbrown
5 ай бұрын
great video, thank you for sharing your knowledge.....Paul in Florida, USA
@TheHomecrafter1988
5 ай бұрын
Thanks Mr Brown Mohamed from Algeria
@karmicmessenger
Жыл бұрын
I made a press with this kind of jack but I left it upright; all I did was weld a plate to the top of the jack and mounted it like that. In my opinion, why risk the leaks? It has worked without problems for over 20 years.
@zhookeeper
Жыл бұрын
Yep, I love the detail in the video, but I'm a bit lost as to why it needs to be inverted to use as press?
@TheHomecrafter1988
Жыл бұрын
Thanks. This way I don't need other parts to use it.
@bourbonbeertractorsandprep9335
Жыл бұрын
Next time instead of holding the jack in the vise to remove the large nut just use the vise to grip the nut in the upside down position and just turn the entire jack instead. Much easier that way brother. But don't get me wrong you did great on the jack!
@GR-uy1hx
Жыл бұрын
Really Good, Great Work. Love it.
@TheHomecrafter1988
Жыл бұрын
Thank you brother
@jacquespoirier9071
Жыл бұрын
you made 2 errors in that conversion, the first one is to not seal the pressfit of the copper tube in the base of the jack, the second one is to rely on the Oring on the jack cover gland to insure the oil tightness when the jack is in reversed position, a spring loaded oil seal is a must. I learned it the hard way. good video.
@cristianpopescu78
2 жыл бұрын
Great work,very good explaned! 👍
@TheHomecrafter1988
2 жыл бұрын
Thank you 🙋
@Z-Ack
Жыл бұрын
So you drilled a hole, put a pipe in a different hole, no addition of any check valve? And only other thing was drill an oil fill hole?? Confused
@aussiesmoko
Жыл бұрын
It's amazing what you can do with a piece of wire, a sheet of corrugated iron and some imagination... I liked it when you said the hammer is a very useful tool... You don't use brute force or muscles you just get a bigger hammer Is there anyway of connecting a pressure gauge to the jack or press to show how much pressure is being created 🤔. Just an idea Great work . Giday from Australia 🇦🇺
@TheHomecrafter1988
Жыл бұрын
Thanks Andrew your brother from Algeria
@patrickhenigin4805
2 ай бұрын
Nice job man. I think I'll just use the press upside down.
@abnad2827
10 ай бұрын
Good video,👍👍👍where did you buy the seals? Thank you in advance. From France
@TheHomecrafter1988
10 ай бұрын
Thanks. It's car engine sealer from any car part seller
@ar.al.7780
Жыл бұрын
good job. but I have a question what is the point in inverting the jack. it can be used in it's original position
@TheHomecrafter1988
Жыл бұрын
Thanks I did this so I dont use more steel then I need and use directly the piston of the jack
@khimsophacarfixing
Жыл бұрын
This is a good technique 👍!
@TheHomecrafter1988
Жыл бұрын
Thanks 👍
@andreascarlberg3998
Жыл бұрын
Good work, skillful man.
@TheHomecrafter1988
Жыл бұрын
Thanks
@pitmaster4860
Жыл бұрын
The hammer next to the crowbar are the best tools ever.
@patrickhenigin4805
2 ай бұрын
Old muffler man's motto, "don't force it, get a bigger hammer".
@naoufel7676
4 ай бұрын
Good job, nice video and great explanation, I like your way of doing things. Thank you and vive l'algerie❤
@TheHomecrafter1988
4 ай бұрын
Thanks weld bladi 1,2,3 vive l'Algérie
@asslam11
Жыл бұрын
Tbark allah 3elik a khoya,
@Gar99
Жыл бұрын
You must fit a one-way valve in that long pipie to assist with flowback
@stephenspreckley8219
8 ай бұрын
Very clever.....yet why not just install the jack the right way up? That's what I did to make a press.
@TheHomecrafter1988
8 ай бұрын
Thanks.This way I will use less steel and i can slide it from side to side
@michaelnelson9140
4 ай бұрын
I have tried inverting hydraulic jacks before, and they never work! Like the fluid in them drains to the other side, and they won’t pump. But they have enough fluid in them, because they always work just fine the right way?
@TheHomecrafter1988
4 ай бұрын
I'm using my hydraulic jack on my press inverted for two years and I found out that I need to keep the return valve closed and the pump handle down 👇 ready to pump .Sometimes I don't use it for months but when I do it always works
@jackrichards1863
Жыл бұрын
Nice job Mr.👍👍👍👍👍👍😎
@TheHomecrafter1988
Жыл бұрын
Thanks 👍
@alitn588
2 жыл бұрын
Nice job
@TheHomecrafter1988
2 жыл бұрын
Thanks
@estrelaprestadora6758
Жыл бұрын
Top, já fiz e ficou bom
@naingmoehtet8995
2 жыл бұрын
Is it enough one 9mm pipe? What about other ?
@TheHomecrafter1988
2 жыл бұрын
You can use a smaller size even 6mm it will fit without drilling
@naingmoehtet8995
2 жыл бұрын
@@TheHomecrafter1988 I mean other drain hole, close or open?
@luckyj13k8
4 ай бұрын
Question! why can't you just mount the jack facing down on a steel frame and use as is? Great video though!
@TheHomecrafter1988
4 ай бұрын
Thanks. I flipped it so I use less steel in the press
@RustyInventions-wz6ir
4 ай бұрын
Very nice work
@TheHomecrafter1988
4 ай бұрын
Thanks brother
@nunesmotos351
Жыл бұрын
No preço que ta uma prensa é muito válido a idéia super top
@pinocolada4254
Жыл бұрын
Yes it is. I wanted to buy a press last year, didn't do it. Looked this week, price had doubled. So, 30 tonnes bottle jack and the trick from this video it is.
@jimmybritt9537
Жыл бұрын
" nice conversion 👍👍🇺🇸 "
@TheHomecrafter1988
Жыл бұрын
Thanks brother
@thrustprop67
Жыл бұрын
you make a first rate video ,,, like the music too
@TheHomecrafter1988
Жыл бұрын
Thank you brother ❤️
@dennisw7350
11 ай бұрын
really enjoyed your vjdeo
@TheHomecrafter1988
11 ай бұрын
Thanks 😊
@KarasCyborg
5 ай бұрын
Using your impact hammer punch tool to open it.
@woodennecktie
Жыл бұрын
if there is any improvement to be made , than its having the press work from underneath , a million more possebilities ... so turning the jack upside down is loosing strategy
@antoniomontana2232
Жыл бұрын
Пробку надо было хотя бы на 16 мм приварить, чтобы со шприцом не заморачиваться . А идея и исполнение- достойные!
@brianleduc2244
6 ай бұрын
After all this !!! Should took 10 mins more and finish the jack probably so the Handel will pump the sameway it did befor the chang over ,,,, does lifting the handel and press easier 😮😮😮
@emailtour
2 ай бұрын
आप lock plyaer से भी फिक्स कर सकते थे होल क्यों किया?😮
@JamesHawkeYouTube
Жыл бұрын
I have big piston. It has large diameter.
@readthebible1958
Жыл бұрын
Liked the video but not the music.
@TheHomecrafter1988
Жыл бұрын
thanks I'll not use it in my next video
@readthebible1958
Жыл бұрын
@@TheHomecrafter1988 Thanks. I will subscribe.
@user-ds6qf2mv1q
2 ай бұрын
правильно, что сделал отверстие выше бывшего заливного, иначе не качает
@ezwa9979
13 күн бұрын
I heard these dealing balls work on gravity?🤔
@TheHomecrafter1988
12 күн бұрын
They work under pressure and there is a thin washer that acts like a spring to keep them in place
@mastourabderrahman694
Жыл бұрын
الله يحفضك وين راهم فيديو نتاعك بالعربية نحتاج فيدو منهم
@TheHomecrafter1988
Жыл бұрын
amin akhie supremethom
@josephsaucedo8691
Жыл бұрын
It would of been easy to just cut off the piston off the 3ton and get square like tubing weld a small channel iron on each side and weld the 3 ton piston in the center and weld a plate for base to mount the hydraulic straight up you can also put return springs if wanted. 👍👌✌️💯🛠️
@user-sr7nv8iu2j
5 ай бұрын
عالی
@lelearmi6186
7 ай бұрын
Greetings . for technical questions; do you have an email address?
@TheRealCheckmate
Жыл бұрын
*Hmmm, used motor oil inside the jack. Let me guess... Russia?* 😁
@TheHomecrafter1988
Жыл бұрын
Hhh too far Algeria
@howardosborne8647
Жыл бұрын
I've seen plenty of the same bodge work in Britain also. Cowboy work and bodging isn't unique to Russia.
@abdeljalilabdeljalil9022
Жыл бұрын
الرجل الحرفي
@Global7774
Жыл бұрын
Слишком много масла залили))
@tpep1693
8 ай бұрын
Every bottle jack I have turned up side down, would NOT work, Hmm.
@engan7417
Жыл бұрын
Wor
@salihxojaumarov9345
Жыл бұрын
З ru malikam sevgilim w
@hunterburrell5430
Жыл бұрын
I love you meth
@TheHomecrafter1988
Жыл бұрын
Thanks
@charlesball1308
Жыл бұрын
Upside down jack don’t work
@TheHomecrafter1988
Жыл бұрын
yes they do work if you did this modification and i have a press build on my Channel and I'm using it for a year now this way without a problem
@scroungasworkshop4663
Жыл бұрын
Yes it does. My press has an up side down jack for many years and works perfectly.
@ianrobertson3419
Жыл бұрын
You have to make sure that it's a multipositional jack. You are correct in that the cheap jacks won't work upside down. The labour in this video isn't worth it, just buy a press or build a frame type that takes a bottle jack without the hassle.
@howardosborne8647
Жыл бұрын
It works just fine if you modify the oil reservoir pick up point as he has here.
@whitefox9
Жыл бұрын
That table you working on is not suited for what you doing
@doughunter3967
Жыл бұрын
good vid, thanks for sharing, if you get a thumbs down it is because my computer and boobtube are acting up...thanks again friend...doug
@TheHomecrafter1988
Жыл бұрын
Thanks Doug for stopping by
@bartstewart1807
Жыл бұрын
It will not work upside down you must have a mechanical jack the fluid will be at the top of the jack and the pump will run dry
@TheHomecrafter1988
Жыл бұрын
I made my press and I'm using it for more than a year with no problem watch the video of my press
Пікірлер: 113