well done lads my land lord is so cheap been making excuses for months about doing fascia's told him last night iv had enough ill figure it out myself with a youtube guide video.
@yvonne.stewart2745
2 жыл бұрын
Yes I'm thinking of doing it myself along with my daughter. My front and side where I can reach not to high. Scared of height. I've learn a lot watching KZitem. Me and my daughter changed the pipes to my the main drain cast iron by watching KZitem. Saved myself about 7,000.00 dollars. About 5 years ago and no more problems since.
@robertpilkington4442
5 жыл бұрын
How can you fix new soffit over rotten roof timbers, these should be replaced /repaired and treated with suitable wood preservative prior to the replacement taking place
@CurvedSlightly
4 жыл бұрын
TrADIES, THEY DO LITTLE AS POSSIBLE. i BET THEY CHARGED FOR REPLACING THE TIMBERS THEN DIDN'T BOTHER "yEAH LOVE WE REPLACED EVERYTHING..."
@Benzknees
3 жыл бұрын
It’s alright, the firm will be long gone by the time the householder realises the problem, and that the rest of the timbers have also gone rotten due to the plastic stopping the timbers breathing.
@ryanh3285
5 жыл бұрын
I thought the verge tiles had to be mechanicaly fixed now and was expecting them to use dry verge instead.
@stephenwivverp5599
Жыл бұрын
Good point. Verge tiles would have been mechanically fixed or nailed in layman's terms in days gone by but if a dry verge system is incorporated (now a standard practice) to the build the dry verge units or continuous dry verge system will hold verge tiles securely in place therefore eliminating the need to nail down tiles on the verge. And just who beds down and points verge tiles on a roof these days? CAVEMEN!
@sharicelopez5195
5 жыл бұрын
How much does something like this cost to do yourself?
@paw7110
4 жыл бұрын
Yo Haze £12.50
@TheSubpremeState
4 жыл бұрын
how is it going to be able to expand if its superglued on the joints??
@mde1953
4 жыл бұрын
The glue still gives and expands
@TheSubpremeState
4 жыл бұрын
@@mde1953 while you're there. Why are soffits not run parallel to wall? Would save a lot of cutting
@mde1953
4 жыл бұрын
@@TheSubpremeState Rafters protrude through the wall plus it allows tile overhang into all the guttering work if not it would just be wood anyhow
@TheSubpremeState
4 жыл бұрын
@@mde1953 yes but can I put a 5 metre length up in one peice ?
@TheSubpremeState
4 жыл бұрын
@@mde1953 I think u misunderstood my question. As far as I've seen the soffit is cut in to small pieces and fitted side by side. Why not run one peice with the grooves in the same direction as the wall?
@docmatt
5 жыл бұрын
Come on lads, don’t use hollow on a huge overhang like that, use a solid 150mm shiplap instead. That will bend all over the place when someone tries to clean it.
@timjones7370
5 жыл бұрын
What are you on about? Shiplap gets used for cladding. Not Soffits ahahaha
@taffytop
3 жыл бұрын
No it will not
@yvonne.stewart2745
2 жыл бұрын
Do you need a permit to do this work yourself on your own house?
@bobbycrispy5459
Жыл бұрын
No , the fact u need to ask says to me that you shouldn’t do it bye yourself unfortunately
@wiganer9912
11 ай бұрын
@@bobbycrispy5459 The fact that you spelt ''by'' as ''bye'' says to me that you shouldn't be giving advice.
@bobbycrispy5459
11 ай бұрын
@@wiganer9912 who gives a fuck how I spelt bye
@CurvedSlightly
4 жыл бұрын
"Eh, Dan. we need do a good job as we're on camera. No dodgy scam tradie jobs like we normally do then fuck off home leaving behind a shit job a mess and ripping the customer off..."
@andrejsarhipovs1542
6 жыл бұрын
Where are soffit vents??
@Landofhopeandglory575
4 жыл бұрын
They fitted strip vents on the tops of the fascia boards. It was in the video.
@taffytop
3 жыл бұрын
Not necessary
@fungames24
2 жыл бұрын
@@taffytop It is necessary. On my leaking roof, the roof felt is designed to drip water into the soffit and soffit let the water out from vents at the bottom.
@richgoodman5734
6 жыл бұрын
On top of the facial board
@amdistant5547
Жыл бұрын
Houses in Britain used to be rock solid but thanks to cheap American construction materials, they're now making more and more things of cheap grade plastic.
@jaggiguru3127
4 жыл бұрын
This pvc board not long life
@CurvedSlightly
4 жыл бұрын
Wipe it down, yeah right as if these scamming wankers would do that!
@Petertronic
4 жыл бұрын
Looks flimsy.
@criartoros
4 жыл бұрын
Let's see your video, see how good you are
@Petertronic
4 жыл бұрын
Ooooo meow!
@paw7110
4 жыл бұрын
ForestCat_Peter meow indeed 💅🏻💅🏻
@fungames24
2 жыл бұрын
Not only looks flimsy, it is actually flimsy. When the wind blows, it will be hard to get to sleep.
Пікірлер: 41