Learn to sew your own Flora Diagonal Zipper Pouch in this detailed sewing tutorial.
If you have any questions along the way, you can direct message me on instagram (@torieandren) and I will try my best to answer as soon as possible. For pattern updates or corrections visit my instagram and check my story highlights.
For written instructions visit: torieandren.et...
Instagram: @torieandren
The seam allowance for this project is ¼” and ½". Seam allowance is indicated at each step.
Materials:
Directional fabric is not recommended for Prints B and C, but is optional for Print A. See video for details 04:37.
Faux suede vinyl is recommended for Print B. Other materials such as quilting cotton, cotton linen (55% linen and 45% cotton), 21 wale (21W) cotton corduroy, and other lightweight opaque vinyls (faux leather, etc.) can also be used for Print B. The stability and structure may range.
The Print C Fat Eighth will be for the lining. It will have the same diagonal as the outside. If you would like to use two colours/prints inside instead of one, you will require a Fat Eighth of each print or two pieces measuring at least 8½” × 9½”. You will cut (1) Top Half Template from one print and (1) Bottom Half Template from the other print. You can decide which print to make the remaining zipper tabs.
Materials (Yardage)
Print A (Quilting Cotton): Fat Eighth
Print B (Faux Suede): Fat Eighth
Print C (Quilting Cotton): Fat Eighth
Fusible Fleece (Pellon 986F or similar): ¼ yard
Continuous Nylon Zipper #3 or No. 3 or Size 3: ¼ yard with 1 Zipper Pull Cut to 8½”
Materials (Scraps)
Print A (Quilting Cotton): 8½” × 9½”
Print B (Faux Suede): 8½” × 9½”
Print C (Quilting Cotton): 8½” × 19”
Fusible Fleece (Pellon 986F or similar: 8½” × 19”
Continuous Nylon Zipper #3 or No. 3 or Size 3: 8½” with 1 Zipper Pull
Cutting:
Making your own template is at 00:47
Print A (Quilting Cotton)
(1) Top Half Template
(2) 1” or width of zipper × 1¾” Zipper Tabs
Print B (Faux Suede)
(1) Bottom Half Template
Print C (Quilting Cotton)
(1) Top Half Template
(1) Bottom Half Template
(2) 1” or width of zipper × 1¾” Zipper Tabs
Fusible Fleece - Cut glue side up.
(1) Top Half Template
(1) Bottom Half Template
I am affiliated with and have personal ties to Sewers Club and Owl Be Sewing, but do not make a commission off the products I recommend or share. My opinions are my own and I share products because I love them. I do get items at a discount unrelated to Torie and Ren videos and patterns.
Thanks for stopping by, I hope you love this project just as much as I do.
with love,
torie and ren
Негізгі бет Flora Diagonal Zipper Pouch | Detailed Sewing Tutorial
Пікірлер: 41