Great review, thanks. Just bought one for my sons 21st birthday...hope he understands more of it than I do. Subscribed 👍
@TheTechnologyMan
Жыл бұрын
Thanks for the support! I'm sure your son will love it!
@TheTechnologyMan
2 жыл бұрын
FLSUN Super Racer: geni.us/fZqn (Amazon affiliate link). Let me know if you want to see a follow up video with the upgrades I have planned. And if you have any suggestions please let me know! Timestamps: 0:00 Intro 0:39 What's in the box, assembly 3:39 Automatic bed levelling, inc adjusting Z offset 4:53 Loading filament 5:51 Printer overview, Delta style printer, speed, size and weight 6:48 Components, build volume, glass bed, touch screen 7:32 External control via Octoprint or Pronterface, USB port and microSD card slot 7:56 Printer performance. Updating firmware (new features) 9:17 First test print 9:34 Setup printer in Cura slicer 10:04 Failed print, diagnostics, 10:33 Clean nozzle and hotend 10:58 Lower temperatures hotend - not all-metal 11:08 Insert PTFE correctly into hotend 11:26 Connect wirelessly via Octoprint to calibrate extruder 11:36 3D Benchy PLA at high speed (41 minutes) 12:10 3D Benchy PLA at high speed slowed down 12:26 Super high speed 3DBenchy at 220mm/s test print 12:44 Dimensional accuracy test print calibration cube 12:55 Demanding long print - foldable A-Team van 13:22 Release from glass bed when cool 13:36 Vase prints (vase or spiral mode) at 150mm/s 13:58 Removing more stubborn prints off glass bed 14:08 Filament runout sensor test 14:29 Print resume feature test (power loss) 14:52 Printing PETG 15:28 Custom PETG profile in Cura 15:55 Test prints in PETG, warping 16:23 Printing Flex (flexible filament), custom Cura profile, test print 16:56 Heat up times, power use 17:14 Heated bed variation in temperature 17:23 Removal top cover to reveal 32-bit mainboard, silent stepper drivers, printer noise 17:41 Listen to printer noise 18:07 Conclusions
@stefanoa1756
2 жыл бұрын
A follow up video would be really appreciate! Thanks 🙏
@stephenhumble7627
Жыл бұрын
better review than many others - you actually measured the test cube most reviewers just look at it and have no idea why they bother printing it. for anyone doing technical work this is important well done.
@TheTechnologyMan
Жыл бұрын
Thanks! Yes I tend to print functional stuff so dimensions are important to me!
@DennisVris
2 жыл бұрын
Nice video! Just one note: You say you should heat for PLA (Nozzle 220 and Bed 60) when auto leveling. However, since the ABL probe is attached, the nozzle will burn into the ABL probe. Just heat the bed to 60, but leave the nozzle be.
@TheTechnologyMan
2 жыл бұрын
Thanks. Yes I have been watching out for that but it's far enough away to not cause any issues - and I've done it many times in testing. But to be safe you should probably just heat the bed, and then heat the nozzle for the Z offset.
@tjCooper88
2 жыл бұрын
FYI mine hasn't burnt the abl sensor but results my vary I suppose.
@jasonwu2758
2 жыл бұрын
I've just ordered mine like an hour ago. Would love a follow up on recommended upgrades and the options available! Thanks for the profession look at this! Update: After 500+hrs printing mainly pla and petg and and it's been mostly painless. I've upgraded the extruder (Recommend you stick with an Bondtech BMG style extruder/I'm using Trianglelab DDB version off Aliexpress), bowden tube/couples, Energetic Textured/Smooth PEI sheet (Bed seems to have adhesion issues without glue after 500hrs), spool attachment upgrade I made on thiniverse "Flsun SR Spool Glider", Narrow Fan Ducts S on thingiverse (saw instant improvements even with stock fan on 3d Benchy). Still going strong, it's built quite well. Just with a pei bed and a quality extruder upgrade is all you really need on this unless dealing with specific filaments
@TheTechnologyMan
2 жыл бұрын
Glad you liked the video and thanks for the feedback - if I get enough requests I will do a follow up video.
@fenderfreak86
2 жыл бұрын
I second a follow up video
@TheBlkraven74
2 жыл бұрын
@@fenderfreak86 I thirds that request. I just received mine over the weekend.
@mohankuru7760
2 жыл бұрын
Please do a upgrade video
@matthewjcroy
Жыл бұрын
So I have and ender 3 I have loved dearly for about 2 years . I was looking into buying this printer do you have links to the upgrades you made to it ? I will probably want to make them immediately .
@canicule10
2 жыл бұрын
Very high quality video, like always it was a pleasure to watch, thanks !
@TheTechnologyMan
2 жыл бұрын
Thank you canicule10 - glad you liked the video. Makes my day hearing feedback like that!
@skynyrdd1
2 жыл бұрын
Great video and very informative. Quite tempted by this printer as an upgrade to my Ender 3, I print a lot of RC plane parts and they can take hours so hoping this would cut back on that and save me some time. Did you test LW-PLA on this machine and if yes how was it?
@TheTechnologyMan
2 жыл бұрын
Thanks glad it helped! I've not tried LW-PLA - but can't imagine it'd would be an issue.
@dismaldunc
2 жыл бұрын
Hi Stuart! just ended up here coz of you
@skynyrdd1
2 жыл бұрын
@@dismaldunc always happy to take responsibility 😂
@abpetri
2 жыл бұрын
Very thoughtful video, thank you for sharing. Have you tried printing anything with ABS filament on the Flsun SR? Any advices? Upvote for follow up video with upgrades and such!
@TheTechnologyMan
2 жыл бұрын
Thanks! Yes - I've printed eSUN ABS+. Use some bed adhesive and for me 245C nozzle, 100C bed. It would be quite an easy printer to enclose if you're going to print a lot of ABS. I do hope to do a follow up video - thanks for the suggestion!
@schogaia
2 жыл бұрын
I like the super racer and haven't done any modifications other than switching to a capricorn bowden tube. I intend to upgrade the firmware and the extruder (OMG V2-S) but haven't found the time yet. Ok it's not the time I am reluctant because it works and I don't want to change a running system. But you're right the extruder is bad. I would be really interested in follow up videos on the upgrades you're about to make. I just discovered your channel and subscribed instantly - now I'm going to binge-watch your other videos 😁 Keep up the great work, greetings from Germany
@TheTechnologyMan
2 жыл бұрын
Thank you schogaia! Thank you for the support it means a lot to me! And if enough people want a follow up video I'll make one!
@bobwanmorgan9906
2 жыл бұрын
Love to see your upgrades for the FLSun
@TheTechnologyMan
2 жыл бұрын
Great thanks for letting me know. Have you got the printer - have you done any upgrades yourself?
@GladaTomten
8 ай бұрын
Very good and informative video. After you upgrade your SR, so it can print from USB. Can you still print or flash jour SR from the SD card? I bought my machine used, and can ONLY print from USB. Now I want to install Klipper on it, but can't get it to read the SD card.
@TheTechnologyMan
8 ай бұрын
It's a while since I did this - there's a convoluted procedure to switch between USB and SD card IIRC - check FLSUN's support site. If you can't find the instructions let me know and I'll try and find them.
@dguy-xk4fc
2 жыл бұрын
Is it me or is it kinda ridiculous that you have to screw open the whole thing to update some firmware and do some programming? I mean which average Joe is going to do that?
@TheTechnologyMan
2 жыл бұрын
Yes it is and I hope printer manufacturer's start to realise that these are no longer DIY machines - people just want them to work. You don't always have to upgrade the firmware but in this case the smaller Z-offset increments is probably worth it.
@dguy-xk4fc
2 жыл бұрын
@@TheTechnologyMan I agree. Well the funny thing is i was actually going to buy that SR. I made up my mind. Then i saw your video and that got me thinking.. am i looking forward to immediately having to tinker with it? Not Really. So i did not buy it.
@TheTechnologyMan
2 жыл бұрын
I wouldn't let it put you off - I show how it's done in the video. And you don't have to update the firmware. You could also check with FLSUN to see if you order now whether it would already have the newer firmware? I'm still using this printer over other printers I own just because it's twice as quick! Good luck with whatever you decide.
@Leahd_279
Жыл бұрын
Hi, could anyone tell me what kind of nozzles i need for the flsun SR - I want to experiment with different sizes - I'm assuming I need the longer, M6 Volcano nozzles and the shorter ones won't work?
@TheTechnologyMan
Жыл бұрын
Based on Volcano IIRC.
@slushyvolcano46
Жыл бұрын
I was wondering if you could post the custom Cura profiles used in the video such as the FAST (GMR), FINE 0.2mm, FLEX 0.2mm, and PETG 0.2mm?
@TheTechnologyMan
Жыл бұрын
I would use the profiles supplied with Cura now - the printer was not long out when I reviewed it.
@slushyvolcano46
Жыл бұрын
@@TheTechnologyMan Cura only has a fine and normal profile. Do you have any info or tips about the PETG and FLEX profiles?
@TheTechnologyMan
Жыл бұрын
Try using the recommended temperatures for PETG and Flex and slowing things down a bit.
@MRyansanayi
Жыл бұрын
pls someone tell me how to make flsun purge a skirt to the side before printing. i googled and the codes i found doesn't work in cura. I'm confused. i need help. i have qqs pro.
@TheTechnologyMan
Жыл бұрын
You choose a skirt in Cura under support settings.
@patrickhdsn
2 жыл бұрын
Would love a follow up, I'm considering picking one of these up.
@TheTechnologyMan
2 жыл бұрын
Thanks for letting me know will do my best.
@robertlopez9912
Жыл бұрын
Shit formatting the card sounds ridiculous in it of itself. Thanks to your very good review I will not be buying this one.
@TheTechnologyMan
Жыл бұрын
Glad you liked the video - can't even remember what I said about formatting the card!
@qozia1370
Жыл бұрын
Awesome review, in depth but very well structured and does not drag on
@TheTechnologyMan
Жыл бұрын
Glad you liked it thanks!
@fa-ajn9881
Жыл бұрын
Throwing in my bid for another video documenting modifications etc!
@TheTechnologyMan
Жыл бұрын
Coming soon hopefully!!
@lloydhigginbotham9127
2 жыл бұрын
Definitely interested in what upgrades you make!
@TheTechnologyMan
2 жыл бұрын
Should be coming next month with a look at the new speeder pad :).
@qozia1370
Жыл бұрын
Me too
@easy_3d
2 жыл бұрын
Have you upgraded the extruder? Have you used the magnetic print bed? And also can you make a video on octoprint? Can you provide the link for the flsun super racer upgrades video
@TheTechnologyMan
2 жыл бұрын
I'm going to try and make a short update video in the next month or 2.
@klavsvasilis
Жыл бұрын
bought it a couple of days ago, arrived today- its all metal :) but got one clog in~3hours of use... im really unfamiliar with bowden... my first mod will be sherpa i gues...
@TheTechnologyMan
Жыл бұрын
You mean it arrived with all metal hotend? Mine didn't I had to upgrade. If it is you need to reduce retraction settings otherwise you will get clogs - I use 2.5mm.
@princessa4223
Жыл бұрын
What is the best 3d printer aside its price for big project.
@TheTechnologyMan
Жыл бұрын
Not sure what size you're after - but I haven't tested any really big printers sorry.
@3liJawad
Жыл бұрын
Hello, really enjoyed your review. I am looking to get into the hobby of 3D printing and looking for my first printer. I have narrowed it down to the FLSUN Super Racer, Ender 3 S1 Pro and Ender 5 S1 (or if you have another recommendation around the same price range). It would be greatly appreciated if you could give your opinion on which one I should get as my first printer. Thanks
@TheTechnologyMan
Жыл бұрын
If you don't need a large print volume perhaps the Prusa Mini too? FLSUN if you'll mainly print PLA.
@rmphotographyfilm7754
Жыл бұрын
Is this a good printer for a first time user/ buyer
@TheTechnologyMan
Жыл бұрын
If you're going to print PLA mainly and want fast prints it's a good option. If you're not in any rush and want to experiment with different filaments I'd probably for something different.
@kalashin1529
2 жыл бұрын
Nice video, good review. But i need to say, nearly none of the the shown prints looked really good. Even for the speeds you show, the quality is poor in my opinion. I also got an FLsun SR and i like the printer. The hotend, and the Extruder are the weak points of the printer in my pov. Recommendation for update: Make this Printer work with Klipper! I think it will be a huge improvement! I didnt manage to get it to work with klipper at the moment....
@TheTechnologyMan
2 жыл бұрын
I find the quality pretty good - not much different to more expensive printers I have that print a lot slower. But if you need better qulaity you can slow down the printing and the results will look better. Most noticeable ringing as I mention in my review. I did put Klipper on but have gone back to stock firmware. Didn't like not having screen and didn't fancy having to buy / use another interface.
@beybiyon
Жыл бұрын
I just received my first 3d printer and this was the one I liked since the first time I decided to buy me one and thank's to your review I feel confident that I have a great printer for the long run.. I'm not afraid of changing parts as I already bought an extruder , bi metal hot end, better fans, capricorn bowden tube, and even a chihuahua lol...... I just forgot to buy the tools to change all this lmao...... any recomendations on the L's wrenches or keys!? great review...
@TheTechnologyMan
Жыл бұрын
I like Wera tools but have some nice PB Swiss Allen keys too. Good luck with the upgrades!
@chrisshaw451
Жыл бұрын
No mention of getting all three belts to the same tension.
@TheTechnologyMan
Жыл бұрын
My belts were already tensioned correctly so wasn't an issue for me. This was a review not a troubleshooting video.
@Nomadman4life
2 жыл бұрын
Excellent video ! Very informative. Made me subscribe and like would like to see a follow up of upgrades when you have time. Thanks again 👍
@TheTechnologyMan
2 жыл бұрын
Thanks for the sub! Just waiting on the FLSUN Speeder Pad and hope to get that upgrade video out.
@rubrikduck
Жыл бұрын
Hello, are there any other printers you would recommend more for printing PETG quickly, or could this be easily upgraded to do so?
@TheTechnologyMan
Жыл бұрын
I'll be playing the SR more soon when I look at the Speeder Pad upgrade - so will do some more PETG printing.
@dosso96
2 жыл бұрын
sorry I've used isopropyl alcohol and the bed left some yellow substance on my microfiber cloth... and now it doesn't sick anymore, at least not as good as before
@TheTechnologyMan
2 жыл бұрын
Yes I found you do get some yellow residue after cleaning with IPA - but I haven't found any issues with prints sticking. I would try revelling and and re-adjusting Z-offset. Also are you using different a different filament?
@gunlover7851
Жыл бұрын
For PLA, how would you compare this printer to the Ender 3 S1 pro with sonic pad for speed and quality?
@TheTechnologyMan
Жыл бұрын
Pretty similar - but the FLSUN is probably still a little quicker - and I've not installed their Speeder Pad yet!
@a.n.j.16
Жыл бұрын
thank you for the very thorough review.
@TheTechnologyMan
Жыл бұрын
No problem glad you liked it!
@tjCooper88
2 жыл бұрын
Hi thanks for this. I own two of these and the auto bed level is off. More so on one than the other. I don't understand what it's doing wrong. But there is always a spot higher or lower on the bed. I'd love to see a follow up to this with any upgrades you have done. As I'm considering changing the part cooling fan myself. I have a capricorn tube on mine, plus change the couplings for the extruder as it ends up messing up your ptfe tube after a while. I change to a bond tech extruder and pei sheet too.
@TheTechnologyMan
2 жыл бұрын
Looks like you've done some good upgrades already! Strange with your bed levelling - hope you get it sorted.
@MichelleGianni
Жыл бұрын
Coming from the Anet A8 and Ender 3 Pro progression I just got this printer and I absolutely love it. Blows away the Ender 3 Pro by a long shot and rivals the Prusa MK3 I use at work.
@TheTechnologyMan
Жыл бұрын
Yes definately a big step up from the Ender 3! Glad you're enjoying it 😊.
@swardjustin
2 жыл бұрын
Great video, very in depth and informative. On my way over to your channel to look for that follow-up video!
@TheTechnologyMan
2 жыл бұрын
Great glad you found the video helpful!
@BeFree0_0
2 жыл бұрын
Hi grate video. Where would I be able to find the A Team Van print looks like a fun print
@TheTechnologyMan
2 жыл бұрын
Great thanks! It's the foldable van from Fab365 😊.
@SEGnosis
2 жыл бұрын
At 7:00, white text on a white background is a bad idea
@TheTechnologyMan
2 жыл бұрын
Fair point - IIRC some of the background is black so had to make a decision! Black outline white would have been better but couldn't do that with the labels I was using.
@StevenDavisPhoto
Жыл бұрын
would love to see the followup video with the upgrades
@TheTechnologyMan
Жыл бұрын
Thanks - still in the pipeline sorry for delay!
@rbtmods
2 жыл бұрын
Nice video, I'd like to see the hotend upgrade :)
@TheTechnologyMan
2 жыл бұрын
Great thanks for letting me know!
@visioncorp5228
Жыл бұрын
Best review on KZitem hands down
@TheTechnologyMan
Жыл бұрын
Wow thank you!
@dennisgignac5103
2 жыл бұрын
Very good presentation. Great Job !!!
@TheTechnologyMan
2 жыл бұрын
No problem thanks for the feedback!
@ISetMyFriendsOnFire
2 жыл бұрын
Can you print stuff like masks with this size machine? I’ve been looking to get this or get the Creality CR-10S Pro V2 but I’m having trouble deciding. This looks like better quality but the other one seems like bigger stuff. That’s why I ask if it can still print masks. For instance an iron man mask or black panther one?
@TheTechnologyMan
2 жыл бұрын
I've not printed masks but your best bet is to find the sort of model you want to print and see what the biggest part is to see if it'll fit on the Flsun. You can even download Cura and load the machines you're interested and then open the 3D files. The CR-10S does have a larger build volume but with Cura also check the speeds. That may tempt you to put up with a smaller volume! If you're not in a rush a bigger build volume is always going to be handy for that sort of thing.
@crazytrutas
2 жыл бұрын
Greta video! I´m still on the fence. I would like to see the follow-up video.
@TheTechnologyMan
2 жыл бұрын
Glad the video helped - yes still hope to make a short follow up video when I get time!
@crazytrutas
2 жыл бұрын
@@TheTechnologyMan Please do that. 👍🏻
@SimX9000
2 жыл бұрын
Excellent video and chaptered. I really like mine
@TheTechnologyMan
2 жыл бұрын
Glad you liked the video and I'm glad you're enjoying the printer!
@VK3Dprint
2 жыл бұрын
Let's go! We need a video for upgrades! 🙋
@TheTechnologyMan
2 жыл бұрын
Thanks - hoping to do a follow up video next month - should have their speed pad upgrade too :).
@pixxure1
2 жыл бұрын
Good review! Very informative
@TheTechnologyMan
2 жыл бұрын
Glad it was helpful!
@3dcdp62
2 жыл бұрын
What is de size of the filament?
@TheTechnologyMan
2 жыл бұрын
Standard 1.75mm.
@DemonPlasma
2 жыл бұрын
what a great review, thanks
@TheTechnologyMan
2 жыл бұрын
Thank you I'm glad it helped!
@drusso66
2 жыл бұрын
Would you recommend this over the Ender 3 s1 pro
@TheTechnologyMan
2 жыл бұрын
I'm just reviewing the S1 Pro now but if you're printing PLA and impatient I'd go for the Flsun - it's so much quicker! The S1 Pro so far though produces very good prints, and can print a far wider range of materials.
@drusso66
2 жыл бұрын
@@TheTechnologyMan Thanks for your advice, might wait for your review on the S1 Pro before I decide. I think I would prefer quality over speed and I also would be wanting to print with flexible filaments like TPU .
@TheTechnologyMan
2 жыл бұрын
I use the SR more than any other printer at the moment because it's so fast. And I have upgraded it which I'll cover in a video soon so it's not far off the S1 Pro. It does do Flex - just not anything too flexible. But out of the box the S1 Pro can print pretty much anything theoretically - but still working through my tests to confirm this.
@tjCooper88
2 жыл бұрын
@@TheTechnologyMan I agree. I have a climber 7, three sovol sv01s, two srs, two qqs, anycubic predator (not currently working) and a hictop d3 hero. I ALWAYS use the SR if I can. Never mind the speed, it's just better quality overall as the bed is fixed.
@mohankuru7760
2 жыл бұрын
I have both of them, large pla models work like a charm on flsun, s1 pro for other filaments do a good job, I am planning to do a lgx lite ext and dragon hotend upgrade, for the cheap extruder you can do 2 things, one, a washer from a ptfe tube for the piece on the opening side wheel, two a thicker clip for the coupler downside, ultra narrow fans and just a thicker clip does magic.
@shanemcglade8832
Жыл бұрын
Hi I am a big fan and I am having trouble with my flsun super racer do u have whatsapp or snapchat
@TheTechnologyMan
Жыл бұрын
If it's a specific question you'd be better off asking FLSUN directly or on the Facebook forums.
@shanemcglade8832
Жыл бұрын
@@TheTechnologyMan I tried but do u have whatsapp or snapchat
Пікірлер: 125