I actually did mess up on whether or not it was gonna work with this ASI I knew it was Can Bus but thought I could figure a get around to grab a speed sensing baud rate wire off the pin out I thought I saw one but its a 2 wire tx/rx so naw no go on ASI but anything else it will work THAT DOES NOT USE CAN BUS! If your stock will work plug and play
@Fixedgearr
27 күн бұрын
Hey bro quick question! You’re the only person I’ve seen go in depth on the XION bike. I bought a used one for the motor and battery. How do I remove the motor pulley? Any help is appreciated bro🙏🙏
@andyfumo8931
28 күн бұрын
Sounds like a Fallout video game style radio station from GRAND THEFT AUTO
@andyfumo8931
28 күн бұрын
Man getting so close, i can't wait to see the new motor on and controller and HIGH AMP battery 🔋, bout to be on the starting line of the moto GP
@ChrisCrossingWires1212
28 күн бұрын
Not as close as you think cuz the Pack Im planning to make is a Monster but as long as im healthy wont take too long at all definitely trying to catch the end of the season I hope!!!!
@ScientificLee
29 күн бұрын
yeah got mine with my fardriver...it reads off by 5 mph..( fardriver still to go in and will change the pulse speed when I do )..its a great display.
@nogasdash
28 күн бұрын
Yessirr welcome to the club
@ChrisCrossingWires1212
28 күн бұрын
yeah Bro only prob is not gonna work with my ASI that thing Can Bus only I thought it had line out smh still made for good content most people can use it plug and play
@nogasdash
28 күн бұрын
@@ChrisCrossingWires1212 go fardriver lol jk ok damn ...I def know the other one I have has that shoulda told me bro
@ChrisCrossingWires1212
29 күн бұрын
First person say anything about my ass being fat and looking rough getting Blocked, I been sick bitches Peace!
@ChrisCrossingWires1212
26 күн бұрын
Thanks!
@ScientificLee
29 күн бұрын
I had to take the whole fucking headlight system off lol..massive pain.
@powchainsamaniego6744
29 күн бұрын
You should make video of install new motor
@ChrisCrossingWires1212
29 күн бұрын
Bro did you not hear what i said I gotta do first lol
@IGNITETHEMIC
29 күн бұрын
I recently got an emoto with a fardriver and a 5k motor. It appears to have the factory screen and doesn't show the speed. I was just about to order what appears to be the same screen you have in this video from AliExpress.
@ChrisCrossingWires1212
29 күн бұрын
Dam i did a long answer and didnt save it just make sure the line wire is connected from the farderiver or it still may not read speed on dsiplay Fardriver will definitely work hast line out this BAC maybe not
@IGNITETHEMIC
19 күн бұрын
Hey I just got my display. Which line wire are you referring to? I'm not getting speed everything else seems to be working though.
@IGNITETHEMIC
7 күн бұрын
@@ChrisCrossingWires1212 I got the screen I just can't figure out how to connect the ONE -LIN Speed wire to the N7 display. Not sure what to connect it to on the display wires. Thanks for the informative content by the way.
@IGNITETHEMIC
7 күн бұрын
My current colors connected. Orange to Orange Blue to Blue Black to Green __________________________ Red to Yellow Purple to Purple Light Blue to Light Blue
@IGNITETHEMIC
Күн бұрын
@@ChrisCrossingWires1212 I figured it out. The 'Purple: One-Lin' on my display needed to be connected to the light blue one on my controller.
@andyfumo8931
28 күн бұрын
Holy shit bro, i thought you was in your late 30s early 40s, #forever young . Your motor running on p50b's 😅
@ChrisCrossingWires1212
28 күн бұрын
Naw Im old fuckker normally passes but i look old now
@XXHellBig125XX
29 күн бұрын
hey what up bro just purchased a qs273 8000w and im installing the back whhel right now and listen couple video where there some people who had problem with the big wire who come out of the qs273 was making a shortage cause the wire with time seem tu rub somewhere and short the engine who can i avoid that is there a spacer already made for the to avoid this whole problem ??????
@andyfumo8931
28 күн бұрын
Zip tie that bad boy
@ChrisCrossingWires1212
28 күн бұрын
a few large washers inside the swing arm to give it a few extra mm i just used one its enough but do you have the right drop out that will make it extra bad so make sure
@XXHellBig125XX
25 күн бұрын
@@ChrisCrossingWires1212 got the same bike as you with qs273 5t with fardriver 72680 bms 380 amp with battery 20s 12p samsung 40t
@bmwmpower8440
29 күн бұрын
Do you have any idea how to change km to mph on the factory screen of these RZ bikes
@ChrisCrossingWires1212
29 күн бұрын
Nope couldnt do it
@ScientificLee
29 күн бұрын
be careful of the screen ..it scratches like its made of butter...bit shit really.
@andyfumo8931
28 күн бұрын
Stock or the DN7
@ScientificLee
28 күн бұрын
@@andyfumo8931 Dn7...mine scratched using a cloth ffs.
@ChrisCrossingWires1212
28 күн бұрын
@@andyfumo8931 that stock one scatched easy too but i notice in removing it had a plastic lens you could pop off when you see it here its off looks clear as I had velco on the scratch plastic for myy cellphone screen
Пікірлер: 32