A very interesting video Peter looking forward to the maiden flyte.
@All_things_RC.
9 ай бұрын
Many thanks for watching and responding. The video is on its way in the next couple of days.👍😊 🚁
@PeterQuinn-n5n
8 ай бұрын
Thanks for another great video Pete, I have bought a Trex of Ebay second hand and when I can afford it I would like to build a scale heli so thanks again for the info 👍.
@All_things_RC.
8 ай бұрын
Hi I have a new series starting this week of my Align T-Rex 450L converted to a scale MD500. I bought this second hand and the series shows the strip down, check over and rebuild. I have yet to fly my maiden on the heli but hopefully there will be an opportunity as the last of the re build videos is posted next week. Thanks for your support and watching the channel. Happy flights Pete
@PeterQuinn-n5n
8 ай бұрын
@@All_things_RC. thanks for that info Peter keep up the good work. 👍
@ThomasGreenlaw
3 ай бұрын
Pete, great video.I also am doing to build a Bell 206 like yours, should be in the first of the week. But I would like to know where did you placing the GPS in the body?
@All_things_RC.
3 ай бұрын
Hi Thomas, I left the H1 controller where it was originally mounted on the frame. I bought and installed a longer cable so I could have the GPS mounted on the wooden mounting tray in the fuselage. I bought the cable new from Ebay at a cost of £8 posted. Stop the video at 11.05 minutes played and the GPS unit is mounted on the wooden frame next to the mechanical frame. Unfortunately the image is dark and difficult to see the GPS unit but in the 30 seconds before as the camera pans round the heli you will see the H1 controller and the cable running around the frame to the GPS unit. Good Luck with the build
@All_things_RC.
3 ай бұрын
Thanks for the kind words and watching my video. It means allot to me that you have interacted and asked questions this makes my efforts worth while. Please don't hesitate to contact me if you have any further questions. Good luck with the build.
@jeffkraus1457
3 ай бұрын
I would love to see a mechanics install into a UH 1. I have one that I want to install a FW450 into a Bell UH 1.
@All_things_RC.
3 ай бұрын
Hi Jeff, I have sent some photos by mail.
@shelleibach20
8 ай бұрын
FYI everyone.....the mechanics of the Bell 206 can also be plugged into the UH-1 fuselage with very little change.
@All_things_RC.
8 ай бұрын
Hi and thank you for your contribution to my channel. I bought my 450L V2.5 GPS stabilised heli just before Fly Wing released their Bell 206. A bit disappointing to me but wrong time wrong place. I would just like to clarify this is not a Fly Wing Bell 206 fuselage but an after market product. I could not find the Fly Wing fuselage anywhere to buy and Fly Wing didn't respond to my mails asking where I could buy only the fuselage. A worthy note here is a 470 size fuselage is required for the 450L V2.5 mechanics. I also bought the Roban 450 Bell 206 fuselage but this would have require significant modifications to get the 450L V2.5 mechanics in.
@adilsondejesus6694
9 ай бұрын
Então amigão estou querendo comprar uma más quero saber se teve que fazer muita modificação debaixo já vêm as peças na fusilagem?
@All_things_RC.
9 ай бұрын
Se requieren muy pocas modificaciones en el kit de fuselaje adquirido. El kit estaba completo con todas las piezas necesarias.
@adilsondejesus6694
9 ай бұрын
@@All_things_RC. Obrigado então já vêm né?
@All_things_RC.
9 ай бұрын
@@adilsondejesus6694 Boa sorte com a construção
@adilsondejesus6694
9 ай бұрын
@@All_things_RC. Faz um vídeo dele pronto voando gentileza
@All_things_RC.
9 ай бұрын
@@adilsondejesus6694 Isso será postado no meu canal em 20 de janeiro 👍
Пікірлер: 19