That was amazing. Probably the best 6 minutes I have spent on KZitem against the millions wasted. Thank you.
@glen1arthur
3 жыл бұрын
I must agree.
@abhainnbeag
3 жыл бұрын
Amen to that, no need for all those cedar strips now ! :)
@n1nj4l1nk
3 жыл бұрын
You wasted at least 4 solid years on yt?
@pyramidsinegypt
3 жыл бұрын
This has taught me absolutely nothing, despite the title saying 'how to', but glad you liked it.
@jefftucker4422
8 ай бұрын
@@pyramidsinegypt are you slow?
@donquihote6023
3 жыл бұрын
Little I respect or appreciate more than competent craftsmen. Well done.
@turboturtle9083
6 ай бұрын
A hundred dollars of wood, a thousand dollars of clamps and a million dollars of experience.
@otosjvantolerbok4177
3 жыл бұрын
This takes the meaning of woodcore to a whole other level. And no stitch and glue either. Very inspiring, congratulations with the result too!
@jorgeo4483
Жыл бұрын
This format of sheet is not easy to find in the warehouse, perhaps in the factory and I suppose that the quality is not either. It looks like he just used water. Maybe using a chemical to soften the fiber and steam will give even better results, because some dents are observed, I don't know if the cuts can be improved more for warping. On the other hand, I would like to try the method to use strips later, it would make it much easier, but I don't know if there would be some spaces, especially on the edge of the keel. Still well thought out.
@rraffaell73
Жыл бұрын
@@jorgeo4483 I think he used water whit ammonia or something like that... And then, the hot iron...
@jorgeo4483
Жыл бұрын
@@rraffaell73 After visiting the designer site I see that the plans are for a one or two sheets canoes glued. Yes the ammonia is commonly used in bending wood at home, there are other specific products too but I think that would be easer with a plastic bag and some minutes steaming, this is just 3mm. I'm going to do the test but it's a pity you can't find sheets longer than 3m aprox. for the final size, I think there will be some inconsistencies. On the other hand, the marine okume board according to British standards and UNE has the grain longitudinal to the longuest face and for this bending it would be better transversal.
@nunyabidness2143
Жыл бұрын
@rraffaell73 he only used boiling water and a steamer. I read the blog he linked in the description
@larryreid8562
Жыл бұрын
My first time Kayaking and this Kayak held strong. kzitem.infoUgkx4k5UrhC3v_Y4hIEaXLGvHcN5a5aBmZNB The water got pretty rough as a speed boat zipped by me, and the Kayak withstood it (I expected to be capsized). The Ores are very easy to put together, the pump worked beautifully. the seats are a bit hard to sit in after a while (I recommend sitting on the floor). after reading the reviews I was very scared it'd get a hole in it, the material is very strong and durable. The Air valve may need a small Phillips head screwdriver to adjust, other than that, it's well worth the money!(update)I've gone Kayaking in 3 Lakes and 2 rivers totaling about 40 miles. the kayak had two holes and they patched easily and no other problems can't wait for kayaking season this year!
@banjohappy
6 ай бұрын
oars, not ores. two different words with completely different meanings. spelling is important.
@jjpower6769
3 жыл бұрын
Ten out of ten for the canoe plus a star for the good videography.
@eugeneccampbell
3 жыл бұрын
I think the only reason he was able to finish this boat within six minutes is because he works so VERY FAST, wow! It would take me much longer...
@singharakesh04
3 жыл бұрын
He is as fast as his dog.,.
@joeferreira657
3 жыл бұрын
Really
@consequence8836
3 жыл бұрын
I wanna know where he got Fiberglass that dries in a 60 seconds. We dont have that in my state.
@n1nj4l1nk
3 жыл бұрын
Being able to teleport would help too I imagine.
@donchristianmusic9353
3 жыл бұрын
Its cool but calling this a how to is stretching it a bit.
@sparky7195
3 жыл бұрын
You have people building stuff and you have people know how too build stuff. Wauw!! One sheet of wood never know it was possible. Really nice....
@rossmilner6780
3 жыл бұрын
This is inspiring ! Couldn't take my eyes away for a second.
@vieroboy
3 жыл бұрын
This guy blows away 90% of the so called “master craftsman” on yt.
@heikkianttila6296
3 жыл бұрын
Wonderful! Been eyeing Flo Mo's plans for years. Great that people build them. Yours looks like a super successful one with very little kinks.
@johnhuebner2594
2 жыл бұрын
I built flo mos 15,8 canoe. Just had it out on the water for the first time today and I have to say it floats too well. I can't get it into the water deep enough to keep it stable. I'm trying to figure out why. I would rather not use outriggers for a family canoe trip.
@juliusmotocikli
11 ай бұрын
@@johnhuebner2594have you figured how to stabilize the canoe? I am thinking about the build for my family of 4 (wife, 3y, 10y, and me). Do you think canoe could take that weight and be stable, without some crack?
@tomthompson7400
3 жыл бұрын
thats just perfect , it looks like a great summer project , brilliant folding method.
@blueskybanshee8013
3 жыл бұрын
Always a pleasure to catch a master at his tools 🙂
@axelfroment4871
3 жыл бұрын
I did 2 kayak with the strip system but I’m learning something new today. Beautiful craftsmanship. Thank you
@pabloricardodetarragon2649
3 жыл бұрын
Absolutely magnificent. The cuts remind of the ancestor the birch canoe. The good old compounded plywood, a delicious method that asks for steel nerves and good eyeball techniques. This method needs first rate marine 3 mm plywood with 3 plies of the same thickness thus you get 2/3 of the wood fibers in the length and the only 1/3 in the core at 90 degrees so you can ploy with patience, hot water and sometimes steam. I made one 20 feet catamaran Tornado this way, only 135 kg in 4.2 mm selected okoume plywood and several catamarans 18 m2 (18 feet long, 10 feet wide, mast 31 feet) at less of 100 kg ready to sail; the best with carbon fiber beams was at 93 kg. The Gougeon bros made several race trimarans and catamarans in 6 mm around 30 to 35 feet long. A few Class C catamarans hulls were made this way, as Yellow Pages.
@hakkigoo
3 жыл бұрын
Absolutely ingenious idea. Risk is of course that the material somewhere gets a crack but with wetting and using spanning ropes and as basic principle the 90 ° to the length axis oriented cuts. The best innovation in small boat building since stitch and glue.
@RalphReagan
3 жыл бұрын
You can never have too many clamps!
@patprop74
3 жыл бұрын
I have a box that has no fewer than 60 of them I had used for a past project lol They might find use again, after seeing this inspiring build.
@TrapShooter68
3 жыл бұрын
Rule #1 of woodworking: Any job will require 2 more clamps than you have
@manin10
3 жыл бұрын
My wife says that about shoes!😁
@simonmanning1844
3 жыл бұрын
Fantastic. Can learn more here on 6mins than 6 weeks at school
@bryankautz826
3 жыл бұрын
Woodworker family: "So what do want for your bday? Woodguy: "clamps" Family: "how about Xmas?" "Clamps" "Your anniversary?" "Clamps!" "From the Easter bunny?" "Clamps!!" "You just won the lottery, what ya goin' do first, car, house, trip?" "Buy a lifetime supply of clamps!!!" 😅😅😅😅😅😅🖒🍻
@Yorkshiremadmick
3 жыл бұрын
Fantastic and made to look simple and effortless. Anything but. Beautiful craft.
@hendrikus94
3 жыл бұрын
This is an amazing video. It looks great how the canoe takes shape.
Really great! It reminds me of the construction of birch bark canoes.
@latelierdezeus9659
3 жыл бұрын
FRANCE. Very nice realization you must have had the stomach tight to bending, I agree with you the hot water and the iron have well help to accompany the layers of wood. Bravo!
@jeantheron2412
3 жыл бұрын
Absolutely stunning! A master at work!
@user-vp1sc7tt4m
3 ай бұрын
Amazing build and I love the design. Kudos to the builder and the simplicity of the design and to the awesome build execution. It's such a light and strong canoe.
@bobjones8864
3 жыл бұрын
Wow,I’d like you to do an instructional series with explanations and supply list. I’d bet a whole bunch would start building. Thanks for the entertaining video.
@peterrobinson44
3 жыл бұрын
There is more information and links in the full blog: www.songofthepaddle.co.uk/flyply-my-lockdown-torture-t58748.html
@dantallman5345
3 жыл бұрын
Yes please to an instructional video.This was amazing to watch.
@dougoutcanoe
3 жыл бұрын
A brilliant canoe build and such beautiful craftsmanship.
@geoffburrill9850
3 жыл бұрын
Amazing. From a flat sheet to boat.
@ronaldharris6569
3 жыл бұрын
It is amazing to see. those curves are hard to make even using fiberglass
@onogrirwin
3 ай бұрын
Beautiful. Flo-mo is a legend, and it looks like you did a stellar job.
@flomoflowingmotion
3 жыл бұрын
Peter, Congratulations on your excellent build and your own special version of a Gorewood canoe. Thanks also for taking the time to create this really informative video. If you don't mind, I will share the link to the video and to your bolg on my favorite boatbuilding forums. Best regards, Stefan
@peterrobinson44
3 жыл бұрын
Many thanks for your kind comments Stefan - and of course for your brilliant concept and design! Feel free to share the video where you like! Peter
@dontwobble
3 жыл бұрын
How is it informative? He didn't tell us one single step. This is not a how to video. Its a sped up video of a guy making a canoe.
@flomoflowingmotion
3 жыл бұрын
@@dontwobble I understand the criticism, as I expressed myself a bit clumsily. What I wanted to say is that the video illustrates in a very good summary the principle of construction, which I did not succeed so well with my photo journals of my builds. For more detailed information I recommend either to follow the link in the description below the video, or to study the photo series of the construction of my canoes: photos.app.goo.gl/drGSKxbNuzUfCjD3A photos.app.goo.gl/dPdZLvmggTVNqF4a9 goo.gl/photos/MWCVLV3hWnpxKiPd9 photos.app.goo.gl/jfA9LefUHZEgVsct7
@JosephJRyu
3 жыл бұрын
@@flomoflowingmotion thank you for sharing. I am very interested on building one and this is very helpful!!
@garygrinkevich6971
3 жыл бұрын
Beautiful design, excellent craftsmanship, succinct editing, and videography, pleasing audio, truly a master class of skills to behold. Thank you for sharing sir.
@patgleeson1825
3 жыл бұрын
I think that's bordering on perfect design. What an elegant and creative solution and such a beautiful realisation of your idea. Truly exceptional. Thanks mate
@peterrobinson44
3 жыл бұрын
Thanks, but the design is not mine, it was created by flo-mo. Details and links to his plans are here: www.songofthepaddle.co.uk/flyply-my-lockdown-torture-t58748.html
@benji.B-side
3 жыл бұрын
The only click bait title that has not disappointed me. Clever stuff and masses of clamps, great viewing!
@refisherdesktop
4 ай бұрын
Both impressed and depressed with/by the orderliness and cleanliness of that shop. Oh yeah; the boat building was on point, too.
@Tonyflags3323
3 жыл бұрын
What a great design and he made it look so easy! Well done sir
@Laiynnalaiynna
3 жыл бұрын
That is amazing! I would gladly watch the whole process, especially with any explanation of what you are doing and why. Super interesting and the canoe is gorgeous (and less than half the weight of the polyester one I have been using!).
@peterrobinson44
3 жыл бұрын
More details here www.songofthepaddle.co.uk/flyply-my-lockdown-torture-t58748.html
@debbiebramwell4522
3 жыл бұрын
so beautiful to watch and I cannot believe how lightweight the canoe is!
@abettermousetrap
3 жыл бұрын
I'd have thought building a canoe would take longer than 6 minutes but there you have it
@KelleyStrzelczyk
3 жыл бұрын
I can carve out a log in five. jk
@corneliusoutdoors
3 жыл бұрын
I took 6 weeks to build my 18ft stitch and glue canoe
@ronniekeates3349
3 жыл бұрын
It's amazing how quick it goes from "that's a strange shape for a canoe" to "would ya look at that: it's a canoe!"
@lorimcquinn3966
3 жыл бұрын
It always a pleasure to watch a Craftsman at work. What should be eye opening is the use of a respirator, even while using a vac system to sand wood, epoxy, etc. Just because Grandpa did wood working and didn't need any safety equipment, doesn't mean it was smart. Clean shop, clean build, beautiful canoe.
@rollingthunder277
6 ай бұрын
Fascinating. In the ancient past, I would portage a food pack, utility pack and a Grumman canoe. I could have used a lighter canoe like this one.
@philrobson7976
3 ай бұрын
I ran my Grumann over a few rocks enough times to dent it. I’m glad I didn’t have this canoe. But I’d still love to have it for lake and non-rapid traveling.
@jarodcrazyindian
3 жыл бұрын
An hour and 43 minute battleship should be next.
@mr.robinson1982
3 жыл бұрын
Excellent job Mr. Robinson
@philhewett1601
3 жыл бұрын
Remarkable. Seems deceptively easy but, I'm sure there is a certain amount of finesse involved in the tensioning on the ratchet straps. Weighing in at 30 lb (more or less) is awesome.
@Moisandranat
2 жыл бұрын
Amazing! ❤️❤️❤️ The best plywood canoe I've seen on KZitem
@terrenceobrien5271
3 жыл бұрын
Absolutely gorgeous. My interest would be using this method to build a velomobile. Also, perhaps a similar technique for aluminum. Saw a similar technique used by a sheet metal worker to build a very contoured sort of lawn chair like seat. You guys are magicians!
@s10m0t10n
3 жыл бұрын
What a great video. I wouldn't have minded if it had been a bit longer and shown more, but I'm glad I watched anyway. I'll bet that canoe handles like a dream.
@peterrobinson44
3 жыл бұрын
More information here if you are planning to build one! www.songofthepaddle.co.uk/flyply-my-lockdown-torture-t58748.html
@s10m0t10n
3 жыл бұрын
@@peterrobinson44 At my time of life and activity level, I think it's safer to watch and admire a craftsman than to undertake such a venture, but I nonetheless appreciate the information. Stay safe.
@Lazarus-aap
3 жыл бұрын
It's so simple, yet so brilliant! I love it!
@michaelfletcher6166
3 жыл бұрын
How cool is that... “inspired”, great video!
@robertbourke7935
2 жыл бұрын
Really lovely work
@EricFergusonCinema
3 жыл бұрын
This is wonderful work to watch. And such a clean shop!
@directorstu
3 жыл бұрын
I've built 3 canoes. The repeated filling of seams, sanding and taping takes a looooong time. Gonna give this a go.
@carloswheeldon2553
3 жыл бұрын
Lovely craftsmanship! What a nice canoe 👍
@heavyweather
3 жыл бұрын
Flo-mo is a genius. Great execution too.
@cana125dh7322
3 жыл бұрын
Excellent choice of music. God Bless.
@MohamedOmar-wh4zc
3 жыл бұрын
Fantastic. Thanks for sharing. I'm itching to make one.
@Squarepeg57
Ай бұрын
This was wonderful! You’ve inspired me to build my own!! Thank you so much!
@tylerdebbailey2855
3 жыл бұрын
This is a really cool project, would be nice too see a more in depth video about materials and dos and don'ts this seems like something I want to try. I saw your blog on song of the paddle and it had some helpful info
@daverodgers779
3 жыл бұрын
There is a link to more detail in the description I believe.
@garypeterson862
2 жыл бұрын
@@daverodgers779 Dave I don't see the link. Give me a hint wheretis.
@daverodgers779
2 жыл бұрын
@@garypeterson862 considering how long ago this was for me, sorry but I can’t help you. Google perhaps?
@franklinpenaranda8520
6 ай бұрын
Well done sir. Thank you for uploading the video. It's always refreshing to see an alternate construction method...👍👍👏👏👏
@larryfregin2859
3 жыл бұрын
Simply Beautiful
@leo150125
3 жыл бұрын
Really awesome work mate!! This is the real “know how”! Thanks
@billmarkelz
3 жыл бұрын
Wow, wow and wow! That was fun to watch!
@stevem7868-y4l
3 жыл бұрын
What an interesting vid, and real nice to see a clean build area
@francescologrillo443
3 жыл бұрын
perfect execution of an artist
@jantepas7511
3 жыл бұрын
This is craftsmanship! Great to watch. Thanks.
@kevintaylor791
3 жыл бұрын
FAKE!!! The video is sped up! No way that took you 6 minutes!! Hopefully youtube comment sections understand jokes still. Beautiful work!!!
@137bob3d
3 жыл бұрын
as a strip - method builder one advantage of your way stands out : the narrowness of the ends does not need any sanding . just seal the inner surface and let the outer glass layer provide the needed strength. smart of you too to show the scale reading at the end.
@SuperBarbaar
3 жыл бұрын
If I was him, I would start a company. Build 1 in 6 minutes, 10 in a hour. 80 in a day. Hmmmm big business.
@modelnutty6503
3 жыл бұрын
Flo-Mo ROCKS, his designs are definitely over the top brilliant.
@VdubjunkiesStuffandThing-fx8ig
3 ай бұрын
Absolutely mesmerizing. Seriously fine work.
@jeffreyfernandes2662
Жыл бұрын
This was almost as enjoyable as floating along with the Loons as the morning fog lifts off the lake, watching the trout ripples as they rise to sip the insects.
@dennisxu2790
3 жыл бұрын
Wow this is the best plywood canoe design I have seen! Can you please share the design ?
@peterrobinson44
3 жыл бұрын
It has been published by Flo-mo here: flo-mo.weebly.com/gorewood-14-solo-canoe.html
@dennisxu2790
3 жыл бұрын
@@peterrobinson44 thanks Peter !
@michaelbyrne8860
6 ай бұрын
Very Cool, A Great Design built by a True Craftsman!
@electrichospital
3 жыл бұрын
I am impressed. As you began curving the sides I got really excited thinking you were building a shovel nosed canoe.
@mishakolomoicev9701
2 жыл бұрын
I love work, I can sit & watch for hours.
@Lint_Julep
3 жыл бұрын
This was very cool! Some fine work there : )
@JLPryce
3 жыл бұрын
Excellent. Love the design. What was your inspiration for this canoe and do you think the technique could be applied to kayak building?
@peterrobinson44
3 жыл бұрын
Hi. The concept and design was by Flo-Mo and there are links to his website and designs on my written blog which has photos and much more detail: www.songofthepaddle.co.uk/flyply-my-lockdown-torture-t58748.html Flo-Mo's inspiration came from the original birch bark canoe concept. I think the same method could be used for a kayak (Flo-Mo has one on his website) but the sharper curves might be tricky and perhaps you might need to use even thinner ply.
@digitalcactus5452
3 жыл бұрын
Beautiful work.
@dennis6325
3 жыл бұрын
Wow! Wow! Wow! I have built a few boats in my time and my, my ,my I can't believe what my eyes are seeing. You have an amazing design there and excellent craftmanship!
@peterrobinson44
3 жыл бұрын
Thank you, very kind. All credit for the concept and design goes to Flo-mo, not me. Links to his website and design are in the full blog here: www.songofthepaddle.co.uk/flyply-my-lockdown-torture-t58748.html
@barryp4700
3 жыл бұрын
Fantastic! What type of veneer did you use for the canoe? You have a lovely workshop!!
@peterrobinson44
3 жыл бұрын
3mm okoume ply.
@barryp4700
3 жыл бұрын
Thank you.
@ThomasWilde3003
3 жыл бұрын
This video is so awesome and this music is so amazing. This man is so skilled :]
@fredbecker607
3 жыл бұрын
Great background music
@Microbex
3 жыл бұрын
Absolutely gorgeous. Thanks for sharing.
@johnhighstreet5199
3 жыл бұрын
C'mon, man, how is anyone supposed to watch a 'How To' video with a cute little Dingo in it?
@johnallison4688
3 жыл бұрын
Right country, wrong breed. It’s a Queensland Blue Heeler, bred for working cattle..
@johnhighstreet5199
3 жыл бұрын
@@johnallison4688 , well, that was a bit of tongue-in-cheek, but the cutest thing ever, I had to watch the first part twice!
@tzzogg
3 жыл бұрын
you are a freaking genius: kudos!
@aburgheim
3 жыл бұрын
I dont think i believe what iam seeing!!!!!! Astounding!!
@jackrabbit5047
3 жыл бұрын
That's amazing! Wonder what it weighs? Seems super light. I'm very impressed!
@Phoenixonesix
3 жыл бұрын
Scales at 5:55 said 13 kgs
@kristinesautter3529
3 жыл бұрын
That's like 29 lbs.
@jonhohensee3258
3 жыл бұрын
You're not sure if you wonder?
@dougtheslug6435
3 ай бұрын
That's a great technique......nice work.
@pawpatina
3 жыл бұрын
I hope the 50 people that hit thumbs down find something in life to make them happy because they clearly need it...
@andrewhoward7200
3 жыл бұрын
They did, they bred- there's now 58 of them!
@dw-yc6qb
3 жыл бұрын
Maybe if he did it in 5mins they,d be happy,, guess back to tik tok for them
@donnyo65
3 жыл бұрын
I have honestly never seen a boat built like that before. It all makes sense and I will be researching it further - great video.
@peterrobinson44
3 жыл бұрын
Links and plans in the full blog here: www.songofthepaddle.co.uk/flyply-my-lockdown-torture-t58748.html
@donnyo65
3 жыл бұрын
@@peterrobinson44 Brilliant, thank you.
@blanst01
3 жыл бұрын
Just wow!!!! Very impressive. Nice job 👍
@terrysanders2817
3 жыл бұрын
Wow! Thank you for the inspirational video!
@georgefisher1719
3 жыл бұрын
Light as a feather very easy to handle very impressive ...
@oldyeller9849
3 жыл бұрын
Beautiful!
@zeljkodejanovic8786
11 ай бұрын
Your canoe is great. I like it better than the complicated ones that they make out of slats.
@leonardsackett9568
3 жыл бұрын
I would say something but my jaw is on the floor
@jonhohensee3258
3 жыл бұрын
You might want to see a doctor.
@dimensionalidad9859
3 жыл бұрын
Nice job!!! Sprout rocks!
@theinspector1023
3 ай бұрын
13kg. Wow! And what a sexy shape! I got a bit overexcited watching this.Those are very tight bends up at the bows/sterns.
@JokerInk-CustomBuilds
6 ай бұрын
Cool build. Personally handling that big piece of thin plywood would have diven me insane! LOL I built my own canoe as well in a similar but different way. I made a frame out of thinn wood strips. I then cladded thet frame with more thin wood strips. Then I draped a big piece of burlap cloth over it and then proceeded to paint the burlap with 30 layers of oil paint. The first layers I thinned with terpentine to make sure it soaked into the burlap. Then I finished off with railings and interior cushins. and a top tent.
@steendful
3 жыл бұрын
Makes me think I can make one 😂🤣.
@MrSupersidewinder
3 жыл бұрын
That was easy, I barely feel tired!!! Great skill set. 😀
Пікірлер: 1 М.