Thank you...I have this controller for my 30cc buggy....I actually didn't realise it had so many adjustments....what an excellent tutorial ...great vid ...
@jordanpopo9693
7 ай бұрын
I look forward to mine arriving now i have this video to set it up perfectly 🎉🎉🎉 thanks bud
@eyal-carmi
11 жыл бұрын
Hi Angel, The radio-controller has 10 model numbers to choose from (Each model number lets you adjust the settings of each property and then save those settings to that model) . You can reset the values of all the properties of a specific model number by: 1. Turn on the radio-controller 2. Choose the model number whose values you which to reset 3. Turn the steering wheel right, and while doing so, press the back button. You should hear a high pitch sound (I had this sound).
@claudekim7876
11 жыл бұрын
This Is got to be one of the best hi tec controller on the planet .. It works well with any scale cars and it looks awesome with very good price .. My baja runs great with this and I love all the features as well as easy trim control .. Very fast response as well
@marknickells6097
2 жыл бұрын
I went through multiple Futaba systems, and paid "Through the nose, for long distance. " (About 1000 feet), and although cool. IT wasn't worth it. I was able to fine tune 4 models, with mixed results. I ended up paying $75.00 for a new receiver, after it got water logged. (FUTABA does not offer a water proof receiver. ) WHY? . If running boats; that's a must . Bottom line. FUTABA is a total rip off, and you're paying for the name, and a lot of stuff, you don 't need. NOW, that same 4 channel receiver, is selling for $119? THAT'S nothing short of theft. BUT, to the point. I have own 3 of the Fly SKY GT3B systems, and all have preformed flawlessly, and have massive range, and WATERPROOF Receivers , by Default, and depending on source, can be purchased for as low as $5. SO, what are the big names (Spektrum , and Futaba doing, to justify the extra cost? NOW on my second radio, I have had the inexpensive radio, linked to four boats, and a Dune Buggy. I don't understand , why people think, they have spend a fortune on a "Cadillac R.C system," when they can buy, a "Mini Cooper," that does the exact same thing? THE look on people's faces, is priceless, or almost shocking. (Can't believe it) ...... Anyways. I am going to recommend FLY SKY over any of the BIG Name systems.
@garyyohe7662
7 жыл бұрын
Thank you. The video is concise and very helpful. It helped to fix a problem I created by misprogramming ABS. ABS is very hard on the drive train for my electric cars, maybe is more useful on gas engines. For my electric car, I turned OFF. Excellent video !
@eyal-carmi
7 жыл бұрын
A real ABS system has sensors on each wheel to get rotational speed feedback. With that feedback it regulates the braking system of that wheel accordingly. I am not sure this remote control - receiver is that versatile. You need that ability in the RC car as well. As I understand, this abs function is simply pulsating the brakes with an option of 3 modes - slow, normal or fast pulsating.
@imakeitworst
10 жыл бұрын
A VERY well done video, as good as a manufacturer could do. Congrats and thanks!
@BOBANDERSON5150
8 жыл бұрын
Finally... Straight forward instructions. Thanks!
@anthonytoombs3115
4 жыл бұрын
Amazing!!! Best how to ever!!! Thank you 🙏 TRX 4 Sport and Traxxas Maxx.
@but531
7 жыл бұрын
Very nice video and smooth i can understand every word , very very good job. After this video i will buy this this flysky.
@alexandrossotiropoulos5621
8 жыл бұрын
Yes, it was a very good tutorial. I learned what the set button on the receiver.
@BOBBY-rr7nq
7 жыл бұрын
Thank-you for this video. It has helped me alot. I am a beginner and have watched it a lot.
@eyal-carmi
7 жыл бұрын
I am happy to be of help. Enjoy your car.
@tegbwoy91
10 жыл бұрын
Excellent tutorial!!!it helped me out a lot.
@afallenstar4u
11 жыл бұрын
Thanks a lot Eyal, I thought maybe that was it but wasn't for sure. That fixed my problem and I appreciate the help!.
@eyal-carmi
11 жыл бұрын
No problem, I'm glad it helped.
@squadleader2010
5 жыл бұрын
Very helpful, thank you.
@mooselarock5596
4 жыл бұрын
Great vid I know how to work my controller now !! Thanks
@eyal-carmi
4 жыл бұрын
👍
@eyal-carmi
10 жыл бұрын
Glad to hear. Thanks for your feedback
@hardyb311
8 жыл бұрын
+Eyal C Why when i push throttle down it goes in rev? When i push throttle up it goes forward
@eyal-carmi
8 жыл бұрын
+hardyb311 look at this video 1:19
@1200evo
7 жыл бұрын
To add to this, if you position your throttle trigger while pressing the set button, the failsafe will set the throttle to where you are holding it with the trigger. I have no reverse so I pressed the set button while holding the brake on. Now the brake comes on if I turn off the transmitter or lose the signal.
@maznim1268
3 жыл бұрын
If i buy the same receiver like in this video can i create a new model memory? Sorry for bad English
@heklik
3 ай бұрын
Can it use a rechargeable battery, and be recharged ?
@theaccelerator2068
8 жыл бұрын
This vid was vary helpful
@CliffordEdgley
2 ай бұрын
Excellent, thank you. Finally got my rc car going thanks to this tutorial. Much appreciated!
@johnrich1985
10 жыл бұрын
thank you... it helps alot
@kylelambo9202
8 жыл бұрын
Great Video!
@drewbriggs9168
3 жыл бұрын
If you turn off the receiver while the car is using throttle it will not to back to idle. It will stay fixed. So I need a kill switch for the receiver. On the transmitter it goes to idle
@grantfair240
8 жыл бұрын
Good tutorial
@duffyscourt
11 жыл бұрын
got it, tks again, its working!!
@allenmoore9848
6 жыл бұрын
I am helping a friend who has upgraded his radio. When the throttle on the transmitter is in the neutral position the motor turns. Throttle trim does not go far enough to cancel the motor. How do I calibrate the ESC to the radio so the motor will stop when the trigger is released? thanks in advance Allen
@eyal-carmi
5 жыл бұрын
Hi Allen, did your friend set the fail-safe function first ?
@allenmoore9848
5 жыл бұрын
@@eyal-carmi we found the problem. It was the ESC needing to be trimmed mechanically to match. All working good now
@sanchezcruz20
10 жыл бұрын
Excellent video. I am new to R/C. I am experiencing a small delay in the transition from reverse to forward. Is this an ESC or transmitter setting issue?
@eyal-carmi
10 жыл бұрын
First, please specify your ESC and Reciever/Transmitter models. If you have the exact same specification as presented in this video then it might be remote controller settings. What you describe seems like you have the EPA limited at the forward speed (unless your motor is reverse wired and then you would have EPA limited at the reverse speed). For checking, I would suggest you change the EPA for both directions to its maximum (100%) and see if it helps, but be carefull because the speeds can get fast. If it helps then this is your problem. I beleive this problem I described arise from the receiver+remote control which handle the braking syste according the EPA. Please let me know your findings.
@sanchezcruz20
10 жыл бұрын
Eyal C I have the Castle Creations Mamba Max Pro ESC and my transmitter is the same one in your video. I THINK the EPA is set to 100% in both directions, but I will confirm that when I get home from work. Thanks for your help!
@eyal-carmi
10 жыл бұрын
Steven Cruz Also check the ABS settings in the remote controller. If that doesn't help then it might be an ESC issue. I found this post about ESC lag. Maybe it can be of help: www.rctech.net/forum/electric-off-road/280957-mamba-max-pro-146.html
@raynman1989
11 жыл бұрын
hi. im a bit conffused about what to do with the reciever. do I just take out the old one currently in my car and place the new one in?
@hoone1d
4 жыл бұрын
I just started using RC cars and I cannot bind my flysky. I have the exact same set up as you do in your video. I can bind it but when I remove the battery from the receiver and turn off and back on the controller, I lose the binding and receiver starts flashing again.. please help me understand what could be wrong...
@eyal-carmi
4 жыл бұрын
Hi, first let's make sure things are done in the right order. Binding wire is inserted to channel 3. The receiver must get power in order to do the binding. This can be done by the proper external battery (if you have such) inserted to the Vcc socket OR the power can be given by the ESC connected to channel 2. You must not use both. BE CAREFUL when binding if you choose to use the ESC connected, because the car throttle can run unexpectedly, so be sure to hold the car safely. The directions in the video worked for me, but let's make a change (According to page 9 instruction F from the manual). Follow the instruction in the video with the following change - remove the Binding wire BEFORE you remove the battery (or ESC) from the receiver. Only then remove the battery from the receiver. Tell me if that solved the problem. The manual can be found here: fccid.io/N4ZFLYSKYGT3B/User-Manual/User-Manual-1769993
@RickysRcChannel
4 жыл бұрын
Is it possible for the throttle servo not to work, by pressing a wrong button on control thanks.
@eyal-carmi
4 жыл бұрын
Hi Richard Baker, the question is not clear to me. Can you please rephrase or explain what you mean ?
@garyhaynes9282
8 жыл бұрын
Thanks Mate!!!
@GoonClimbers
11 жыл бұрын
I can get it to steer but I cannot get it to go forward or reverse. How do i get it to move??
@johncyrus05
11 жыл бұрын
when putting the model and name on the controller is it alright not to put model or name in controller?
@alittleodd1
7 жыл бұрын
thank you
@xavierlim
9 жыл бұрын
hey, i have the exactly same receiver with yours. When i plug in a servo in channel 3 (for other purpose), the original servo that plugged on channel 1 not working anymore. when i trim it, it still can move, but i can't steer it. How should i solve this problem? Can i actually plug anything into channel 3?
@eyal-carmi
9 жыл бұрын
Hi,I haven't used the 3rd channel, but it seems strange to me that 3rd channel would affect the 1st channel. Regarding its usability, you can plug a servo or use it as a switch, but you might need some other accessories to apply it. Search for some videos regarding it. I found some mentions about people using a modified firmware to enable more capabilities including 3rd channel capabilities: www.rccrawler.com/forum/electronics/376715-flysky-gt3b-servo-winch.html Hope it helps.
@ThePigdoctor
5 жыл бұрын
Hi good video, helped a lot! But why is my car reversing when I want it to go forwards and forwards when I press reverse? Help!?
@eyal-carmi
5 жыл бұрын
Hi ,You might have reversed it accidentally. Look at the video at 1:19 (talks about reverse)
@johncyrus05
11 жыл бұрын
Hi eyal i just want to know is that alright not to put the model and name?thanks
@coldcrash83
3 жыл бұрын
How many volts your battery pack did you use while youre binding?
@eyal-carmi
3 жыл бұрын
4 AA batteries. These were rechargeable 1.2v each so you get 4.8v, but you can also use Alkaline 1.5v each to get 6v. .
@coldcrash83
3 жыл бұрын
@@eyal-carmi or can i use esc's cable ?
@eyal-carmi
11 жыл бұрын
Yes. Follow the instructions in my other video "Traxxas Slash Platinum 6804R recommended accessories ". In the "About" tab you will find the contents. Press "Installing the receiver 2:20". It will guide you through the process of how to install the new receiver (after you uninstall the old one offcourse).
@petertebo914
2 жыл бұрын
i have a little issue with my flysky when i pull trigger get notheng but when ki push it frorword i the motor runns
@petertebo914
2 жыл бұрын
but have a boat
@Shlomi_Azulay
7 жыл бұрын
Thanks, channel 2 and channel 3 are sets to failsafe, i want to keep channel 2 failsafe and channel 3 unfilesafe, do you know how to do this? thanks shlomi
@eyal-carmi
7 жыл бұрын
Hi, according to the manual, failsafe works on the throttle channel (channel 2). I have no idea about the other channels. But, why do you want to cancel the fail-safe on a specific channel ?
@MyAmin8
8 жыл бұрын
Lol. When i push throtle, my car goes reverse. If i turn right it turn left vice versa.. Help
@eyal-carmi
8 жыл бұрын
+aminol rasyid Hi, see the "reverse" episode of this video
@zubuxstein
6 жыл бұрын
FAIL, so negative expo is slower or faster...? On Futaba minus is slower, on JR positive is slower.... so which one is it?
@eyal-carmi
6 жыл бұрын
Hi, In regard to the transmitter- receiver given in this video, Please follow my other video "R/C Car Radio-Control Basics" at 5:35. You will find the expo explained there.
@zubuxstein
6 жыл бұрын
You could have just said, NEGATIVE is slower, POSITIVE is faster following Futaba expo values.
@abhajihadi
4 жыл бұрын
What is reverse function?
@eyal-carmi
4 жыл бұрын
It lets you reverse the direction of the channel. For example, if you use the reverse function on the throttle channel, then when you turn the joystick forward, the car would drive backwards. I believe that function is present in order to overcome compatibility issues between the receiver and the car controller.
@abhajihadi
4 жыл бұрын
@@eyal-carmi I have purchased this few days ago. Waiting for esc. Building totally hand made crwler. Your video helped alot to understand rc tx rx. Make more videos like this. The way you convey is best.
@eyal-carmi
4 жыл бұрын
Thank you abhajihadi. Good luck with your project.
@abhajihadi
4 жыл бұрын
@@eyal-carmi thanks
@FU420B
9 жыл бұрын
Thank you.
@dominickharding8278
9 жыл бұрын
GD VID N1 WELL DONE , ;0)~
@8181mike1
8 жыл бұрын
can't get the trigger to work
@eyal-carmi
8 жыл бұрын
+michael mcdade be more specific
@reconrcadventures2430
7 жыл бұрын
Haha the video ends at 911
@eyal-carmi
11 жыл бұрын
Hi Jose, I don't understand what you mean. Please explain to me in a private message.
@drakinclaq
8 жыл бұрын
Wow, this totally helped me! THANKS!!!!
@DanBuilds
5 жыл бұрын
This was SO HELPFUL! Thank you thank you.
@litonazad
3 жыл бұрын
Thankyou for the guide. Appreciated.
@eyal-carmi
3 жыл бұрын
Dear subscribers, I created a course about understanding Exponential / Scientific notation. It is aimed at pupils about the 7th grade or more. I made it available for free for a limited time. I invite you or your kids to try it out and would love to hear from you what you think. I would also appreciate if you rate the course in Udemy. The course is available through Udemy. This is the link: www.udemy.com/course/understanding-exponential-notation/?referralCode=7A561A2C1A3F4A9D0CC3 I hope you enjoy it :)
@catskinZ
9 жыл бұрын
actually enjoyed the very good tutorial .. no waffling on , just precise instructions . well done mate ..
@eyal-carmi
9 жыл бұрын
Daz Brown Thanks
@jordanpopo9693
7 ай бұрын
If only everyone culd get a point across like this. For some reason i struggle to understand more people every day. As if they are all turning in to the same robot or something. They open there mouth and out spills the nonsense. Surrounded by idiots i always say 😅
@kamalajayanthipdnf4867
Жыл бұрын
Heyy.... great video!!! It's really hard to find people who explain this well. I know I'm a bit late but- I'm making an electric go-cart as a project and was wondering if I could connect this receiver to something that powerful (500w-1000w). The usual throttles that are used to control the go-cart take a similar input of 6v so I thought this could work. They also have one negative, one positive and one control wire and output ~1v to ~4 v (no throttle to full throttle). Can you measure the voltage output range of the receiver? connect the negative pin of the receiver to the negative of a multimeter and the control pin to the positive of the multimeter and test the voltage range with no throttle and full throttle. This would help me out a lottttt!!!! Hope you read this.
@filipteplan8544
Жыл бұрын
best tutorial, thank you.
@eyal-carmi
11 жыл бұрын
Hi Corey, You are welcome, and thanks for your feedback; I made a lot of effort to make this tutorial as informative and practical as I could. I don't work for the company. I bought this radio-control for my R/C car, learned its functionality and liked it. Then I decided to pass on this knowledge, so it would be easier for others to use it.
@MoGoodMusic78
2 жыл бұрын
Very good video, very helpful..form that you get my sub. Thanks can't wait to get my new radio
@eyal-carmi
11 жыл бұрын
You don't need the AA battery box, it was just easier for me to show the binding process with it. The receiver that came with the remote-control is already binded. If you need for some reason to bind it, follow these steps: 1. install the receiver - channel 1 to steering wheel, channel 2 to the ESC 2. Follow the binding steps in the video, with the exception: instead of connecting the AA battery box to channel 2, connect the ESC to channel 2. Everything else is the same.
@stevemdelacruz5602
3 жыл бұрын
Love youre video but no captions ..disabled my heraing problem really puts me at a disadvantge when it comes to instructions
@chris147258
3 жыл бұрын
Can you explain how to change the ESC from a JJRC Q39 to GR3E with Flysky?
@kyleyoung2315
2 жыл бұрын
I've got one car setup on on receiver and now the second one once bound just flashes after I've bound it. Doesn't seem to work at all
@psychogameing
10 жыл бұрын
My car has no brakes it does when I go in reverse then drive but when I go forward then brake it goes in reverse??
@abhajihadi
4 жыл бұрын
Thanks alot
@22Tech
7 жыл бұрын
AWESOME tutorial! thanks so much
@eyal-carmi
10 жыл бұрын
Hi Full-Throttle RC, Is your car the Traxxas Slash ? The traxxas Slash (Platinum & Ultimate. Not sure about the sub-models) use the motor of the car also as a braking system. I think your problem depends what remote control you have and how you set the EPA in that remote. In my remote control, the braking system amplitude is related to the EPA, i.e, if the EPA of the backward direction is 20 % for example, my braking system won't be effective. Just for experimenting, try setting the EPA to 100% in both forward and backward direction and see if your problem is solved. Then adjust the EPA to your needs. BUT BE CAREFULL NOT TO HARM YOUR CAR BECAUSE THE SPEED IS GOING TO BE AT ITS MAXIMUM.
@duffyscourt
11 жыл бұрын
ok, so installed this reciever in my slash, confused about binding...i dont have a little power box with AA batteries...do I plug a nimh w traxxas connector directly into channel 2 to bind? excuse my ignorance
@Traqr
10 жыл бұрын
Full Throttle RC, did you switch the ESC / Motor when you upgraded the radio? It sounds like the motor is running backwards, but Channel 1 is also reversed, so "forwards" still goes forwards but braking is messed up. You need to reverse Channel 1 and switch the motor direction. Braking is handled in the speed control, not the transmitter.
@danateel
7 жыл бұрын
Thank you for making this and posting it. The instructions are very clear and easy to follow.
@ztarz26ify
3 жыл бұрын
Best tutorial Video on how to progam your transmitter and receiver I have seen. Thank you for the Vid.
@eyaleyal8441
3 жыл бұрын
Thanks for your feedback. I am glad it could be of help to you.
@afallenstar4u
11 жыл бұрын
Hi eyal i have a issue with my controller. When i got it the steering is backwards. I turn right and it goes left. Im new to this and was wondering if you would mind making a short video showing how to reverse it on the controller. A lot of people tell how online but when your new and don't know everything its still real confusing, thanks a lot.
@eyal-carmi
11 жыл бұрын
Hi afallenstar4u, I assume you have the FlySky remote controller ? If so, look at "Reverse 1:19" chapter in this video. This chapter demonstrate how to reverse direction on the throttle channel which is channel 2. The same idea applies to the steering wheel channel which is channel 1.
@BOBBY-rr7nq
7 жыл бұрын
Thanks for making this video. It helped me alot
@meatdogg101
11 жыл бұрын
i have this controller also,can someone tell me how to set my controller to idle my Jato 3.3.i can't get it started because it not idled up enough.thks in advance
@eyal-carmi
11 жыл бұрын
Hi meatdogg101, If I understand you correctly, the trim function should solve your problem. In the current video you can find how to set the trim function on channel 2 (throttle). If you are not familiar with the trim function, you should also look at my other video "R/C Car Radio-Control Basics" at the trim chapter - it demonstrates the effect of the trim function on the throttle channel (channel 2).
@hugh5400
Жыл бұрын
Thank You so much for making this video. I have been having trouble trying to figure out how to program this transmitter. 👍
@psychogameing
10 жыл бұрын
My car has no brakes it does when I go in reverse then drive but when I hit the brakes when I'm going forward it goes in to reverse??
@Fats-yg1jd
6 жыл бұрын
mine does the same thing
@MightyistheRCGamer
3 жыл бұрын
YOUR VIDEO IS THE BEST ON THIS TRANSMITTER
@edumacaco1696
7 жыл бұрын
Press enter to give a like in this vid....and give a like haha
@Geeko84
Жыл бұрын
Thank you! I struggled a lot with the E.point adjustment
@eyal-carmi
Жыл бұрын
Happy to!
@nazilahcheharon7568
3 жыл бұрын
Good job bro...it's very useful..very nice..
@johnsonjohns6328
Жыл бұрын
Thanks for the video, helped me out of simple jam. If you're set up is in reverse just do as he explains! 1:19...
@bobkids009
6 жыл бұрын
Very educational indeed..........can you conduct one on Radiolink RC6GS....?
@eyal-carmi
5 жыл бұрын
Hi Bob, I wish I could, but I don't have time or resources to do it for now. Sorry.
@dougwellman2444
9 ай бұрын
It helped me out a lot thanks a bunch
@costas4287
9 жыл бұрын
Is binding procedure the same for the King Motors rc Baja gas buggy?.How can I adjust my Baja settings with this transmitter?
@eyal-carmi
9 жыл бұрын
The remote controller in the photo is the same remote controller: www.kingmotorrc.com/buggy/ksrc-001-baja-buggy-26cc-4-bolt-wild-grey/ and the receiver should be similiar, the binding should be the same. Since this is a gas RC which I am not experienced with, I am not sure how the controller interprets the signals from the receiver regarding the failsafe and other settings. You can try to adjust the settings like in the video of this postings and see how it affects the car, but it might be dangerous and affect the car in a wrong way. If you decide to do it on your own risk, I would advise that you CAREFULLY place the car on a stand in a stable position firmly so the driving wheels cannot touch the floor and excidentaly move the car. Then you can experiment and find some answers. BUT, BE CAREFULL. VERY CAREFULL. Gas cars can have a lot of power. If you are not sure what you are doing, then don't do it. The first thing I would set is the fail-safe function. If that is good, the rest would be much safer. Good luck
@costas4287
9 жыл бұрын
THANK YOU
@Josee07081966
10 жыл бұрын
One of the bset explation video, if not the best. it help me a lot. thanks from Puerto Ric and Merry Christmas.
@eyal-carmi
10 жыл бұрын
Thank you and Merry Christmas :)
@robertowillis3921
7 жыл бұрын
Jose Fernandez i
@ajracingindo
6 жыл бұрын
There is hole charger behind it, can we charge the battery with it?
@eyal-carmi
6 жыл бұрын
The manual says you can, but I did not see any transformer specifications. I personally charge the batteries through a dedicated charger XTAR VC4. I believe dedicated chargers protect the battery overcharge better.
@jezzaclarkson5023
Жыл бұрын
Excellent quality presentation. Thank you.
@eyal-carmi
Жыл бұрын
Happy to!
@trapsta205
3 жыл бұрын
like listening to a fucking robot
@D3nn1s
7 жыл бұрын
Funny how many ppl comment before watching the first 10sec where every point in the video is mentioned :P
@2001pontiacta
7 жыл бұрын
I'm having issues with the steering. To turn my RC left I have to turn the controller dial clockwise and to go right I have to turn the dial on the controller counterclockwise??🤔
@eyal-carmi
7 жыл бұрын
Hi, That is easy to handle. Watch the video - Reverse 1:19. You are welcome to look at the content. Each section directs you to the right time.
@Moeledon
10 жыл бұрын
nice video bro . thanks
@mydc2200
4 жыл бұрын
i just burned my receiver and then i found your channel, have to get new receiver, thx
@nathanclaycomb2511
4 жыл бұрын
Thanks, great video
@Rarefighter7
2 жыл бұрын
Amazing clear tutorial
@robplotts9412
5 жыл бұрын
Is the receiver waterproof?
@OneCupOfCoffee204
4 жыл бұрын
Can I bind this receiver to a FS-GT5 controller?
@h4wk1e
10 жыл бұрын
Thanks very much fantastic video, needed this as instructions not clear enough
@larrydommer9109
4 жыл бұрын
I finally got around to setting up a second vehicle on this transmitter. I think I may have gotten duplicate receivers, or maybe it's supposed to work like this. I can control both vehicles with either profile. I assumed that switching from one profile to another would disconnect the transmitter from the previous vehicle. I purchased two extra receivers when I bought the Transmitter. Is it normal to be paired to two receivers on the same profile. It's not much of an issue since I would never be trying to drive both vehicles at the same time, but it can be an annoyance if I forget to turn the first vehicle off after the battery runs down, and then it recovers enough to respond to the transmitter when I switch to the second vehicle.
@eyal-carmi
4 жыл бұрын
Hi Larry, I would assume the same thing as you regarding switching from one profile to another, but different companies have different ways of doing staff, so you can never know for sure (unless they give that info). If you keep the following habit you won't have any trouble: ALWAYS TURN OFF OTHER RC CARS BEFORE TURNING ON ANOTHER. Just make it a habit :)
@eyal-carmi
11 жыл бұрын
The receiver size is: 37.6*22.3*13mm. If this size fits your model receiver chamber, then the next question would be if the voltages and currents your ESC works with fits the voltages and currents of the receiver. I don't think there should be a problem, but, since I don't have experience with 1/18 scale models,I think the best thing to do is contact flysky and ask this question. Their email is: flyskyrc@yahoo.com.
@eyal-carmi
11 жыл бұрын
4. Turn off the radio-controller. Settings have been reset for that model number. 5. Test it - turn the radio-controller on and see if values have been reset for that model number. I have tried that on my own radio-controller and it worked. Please let me know if this information helped you solve your problem.
Пікірлер: 206