Thanks for you videos. I just found this radio. reviving a build of a Leinbach excavator I purchased years ago. This will be the perfect radio for my RC construction hobby.
@RCZby
2 жыл бұрын
This remote control is really awesome, rich functions.
@mitchib1440
11 ай бұрын
This is really useful! Thank you!
@scaccima
2 жыл бұрын
Great video, thanks!
@CarminesRCTipsandTricks
2 жыл бұрын
That's a clever Radio for sure! I hope to be able to get one at some point. ..... I'm almost disappointed that I found the Beier USM-RC-3 in your Store. 😖 I've been FIGHTING with the USM-RC-2 for SO long, trying to get it to do what I want... And the new USM-RC-3 DOES IT!! 😳 I don't even want to open the package on my last RC-2!
@notneilpeart
2 жыл бұрын
Dude, that's a raw deal
@CarminesRCTipsandTricks
2 жыл бұрын
@@notneilpeart Thanks, I'm used to it...
@jjrc9655
2 жыл бұрын
Muy bueno, me a sido muy util, suelo seguir sus videos, y le doy las Gracias
@raymondlee4640
Жыл бұрын
Very good jobs. Link for you set up for 2 motorboat maxing, Pls?
@tonygarcia1347
7 ай бұрын
I have one of these but the screens don't look anything like what yours do. I can create a model but there is no "model structure" option. What do I do about that?
@mrtyko
2 жыл бұрын
Thank you, please for this video
@haraldfriedemann6614
2 жыл бұрын
Hello, this should be an information for Bob from RC hobbyconcepts. I think there is a little failure in your video „Track Mixing with PL18Ev“ In your Video at 10:45 you push the right switch VRE fwd. When the right track is moving fwd your little robot chassis should do a left turn, In the video the robot is doing a right turn. Could this be the failure putting left track in CH 4 and right track in CH 3? Or is it only the mix of the aux 1 + 2 in the wrong way?
@monroyu9519
Жыл бұрын
Can you help me program my 1/14 dump rock truck with this radio?😊
@MobilJJN1080
2 жыл бұрын
seru mantap sekali mobil remot kontrol semngat terus
@ulungprabowo
Жыл бұрын
Why do you have to cut one of ESC power cable? I have mixed my ESC for my tank RC successfully but one of my esc power cable have not cutted out, and after few successful runs it doesnt work anymore. So I look on youtube find this video and kinda surprised that we have to cut one esc power cable and maybe that's why my ESC broken. Have I burned my ESC or receiver?
@HobbyconceptsLLC
Жыл бұрын
Generally one speed control feeds power to the receiver, that is what the red wire is for. If y9u have more than one speed control you do not need both to try to provide receiver power, that is what you pull the red wire from one of them. it is possible that having both esc's trying to provide power to your receiver damaged it.
@ulungprabowo
Жыл бұрын
@@HobbyconceptsLLC thank you for the answer. I have found the damage, it is happen to the ESC BEC. I bought UBEC, powering the receiver from UBEC and pull all ESC red wire and it works now. No damage on receiver. The damage seems happen because of I use all the power cable on ESC, I suspected this because I also just ordered 3 in 1 ESC for tank, and yes from the all ESC cable only 1 has complete 3wire, the other two only signal cables.
@sandman2495
Жыл бұрын
I never was able to get my track mixing to work using this video. Had to change settings in mixing on one channel to -100%. Now with the new Firmware1.0.28 June of 22 it's totally different. Track mixing is a mystery again.
@HobbyconceptsLLC
Жыл бұрын
Yes, I do need to do a new video since the software update.
@sandman2495
Жыл бұрын
@@HobbyconceptsLLC Would be appreciated, Flysky doesn't go into much detail and the menus have changed now. I'm still trying to figure it out. The issue is I can't get the tracks to turn opposite when making a in place turn.
@sandman2495
Жыл бұрын
Just wanted to follow up here. Track mixing is too simple with the latest firmware. As you described in your video before you had to set up two mixes with Master and Slave Channels. No longer required. Simply go into the Track Mixing Page, move the slider on the right side of the screen from X to Check and done. Of course you need to put the left and right tracks on the stick you want to move both. On mine I have the left stick moving the Left Track by moving the stick forward and aft. The left stick also controls the right track by moving the the left stick left and right. Then to mix, again just go into track mixing and change the X to a Check. Way too easy. There are other options such as using the levers to move the tracks AND one stick for track mixing but I don't have that set up.
@gilbertpun2120
2 жыл бұрын
Like your video and the track mixing fits well with my Warslug tanks, hence got a unit in and it works very well. Do you know what is the best sound unit that is able to syn with control unit ?
@HobbyconceptsLLC
2 жыл бұрын
Beier products are the best in my opinion.
@gilbertpun2120
2 жыл бұрын
@@HobbyconceptsLLC Thanks for the advice, got a couple of Beier USM-RC3 sound units from Germany, they work like magic with the Paladin PL18EV unit, especially nice is the remote volume control.
@standrew421
Жыл бұрын
Bob how do you change the color of the light on the joystick
@HobbyconceptsLLC
Жыл бұрын
It changes by itself and can't be set.
@standrew421
Жыл бұрын
Thanks
@RobertBulko
2 жыл бұрын
Hi nice video. 🙂 Have you tried conditions (move / work mode)? I can assign the switch to chose the work mode but have no idea how to actually get it working. I want to use sticks for tracks in move mode, and manage arms, bucket... when in work mode, Do you know how to do it, please? Thanks 🙃
@HobbyconceptsLLC
2 жыл бұрын
I have not tried mode that yet.
@RobertBulko
2 жыл бұрын
@@HobbyconceptsLLC Thanks anyway, there is not much written about it in the manual.
@gamerdominicano3949
2 жыл бұрын
One question If I have a truck with the mfc 03 or the mfc01 Can I also attached the inexpensive tamiya light unit ? On the same truck the same way ?
@HobbyconceptsLLC
2 жыл бұрын
Not 100% sure of your question but if you are asking can you use the wireless trailer lights with dual receivers with an MFC the answer is yes you can.
@184philip
2 жыл бұрын
Can you get Sind boards for this set up bud as I’ve got a hen long Abrams M1 A2 full metal tank just can’t stand the remote thay give you was thinking of up dating the board to a Clarke to 60 but can’t find them on eBay and flipping expensive lol
@HobbyconceptsLLC
2 жыл бұрын
Coming soon is the Beier SFR HL double esc board designed for Heng Long and Torro tanks. Use any radio and azaing sound and features. Better than the Clarke board and I will have U.S. support. Video coming in early 2022. See the board here: hobbyconcepts.net/products/double-sound-speed-controller-sfr-1-hl-for-heng-long-tanks?_pos=8&_sid=c381ebf57&_ss=r
@makewithmegma
2 жыл бұрын
🔥💕👌👍
@thomasosika5056
2 жыл бұрын
Using on 360L soon? :)
@HobbyconceptsLLC
2 жыл бұрын
Yes. I have a 360 coming for myself and will do a bunch of video on it in 2022
Пікірлер: 40