was starting to get frustrated with binding😂 thankyou, you are very informative🙌🏻
@jbrubeljr
Ай бұрын
I have used this video 4 different times now, each time work great thanks for the instructional video!
@billytrissell1461
21 күн бұрын
Was a little hesitant to try but you dumbed it down for me looks pretty easy thanks for the video!
@badideang7334
3 ай бұрын
Big thanks to you from Thailand! I really love the internet
@jasonbecker4997
28 күн бұрын
Have a couple of these to try and when I searched for a how to video this was the first to pop up. Gonna give it a go! Thanks Mazz
@payneja
Жыл бұрын
You need to start a merch store with all your crazy sayings….”No dirty tips - Mazz Designs”. 😂😂
@mazzdesigns6929
Жыл бұрын
I have been told I have my own kind of vocabulary lol hope to have some merch soon!
@hpnc81
2 ай бұрын
Such a great tutorial!
@shawnrichardson118
Ай бұрын
Great video you should be a teacher you make it very easy to understand and everyone wants a clean tip😂😂😂🤘✌️
@stinknugget14
6 ай бұрын
You’re the man thank you for the badass video dude just got a handful of these receivers!
@mazzdesigns6929
6 ай бұрын
Thank you for the support!
@bcochener
Жыл бұрын
And make sure and plug it up correctly when you’re done! 😂😂😂😂 - Word Mazz!
@mazzdesigns6929
Жыл бұрын
Yes sir. Don’t worry I tried driving it without hooking motor up lmao
@bigdumbdad2226
5 ай бұрын
You can put a bit of heat shrink on your clips to cushion them.
@PSYCHO13GARAGE
Жыл бұрын
Nice tutorial on soldering up those micro receivers.
@mazzdesigns6929
Жыл бұрын
Thanks dirk I really appreciate it!
@zakers202
10 ай бұрын
Saved me a ton of time looking for a solution. Thanks 🙏
@mazzdesigns6929
10 ай бұрын
Great to hear! Happy Thanksgiving to you and your fam!
@Kpilato_21
Жыл бұрын
Thanks for these great videos always appreciated
@mazzdesigns6929
Жыл бұрын
Thanks for watching and taking your time to comment I really appreciate the support!
@payneja
Жыл бұрын
Hey Mazz, another great video! The “power cycle” tip is gold! I had to search the dark web to find that tip about a month ago. Thanks again for dropping the knowledge. Looking forward to the Furitek lizard pro / bec wire tutorial!
@mazzdesigns6929
Жыл бұрын
Always my man I appreciate all your support as always. Dig seeing everyone’s comments
@wingnutbert9685
7 ай бұрын
Great vid! Also good to do the connect and wiggle test, before you install the heat shrink. Testing is the function of each plug is working while powdered up. That way you catch any solder joint that didn't stick before you shrink wrap it. :) Any thoughts on if that power switch could be moved? Unsoldering it and add a couple wires to get it off the board. Might need a new mirco switch. But it be nice to get it outta the way to make it easier having the wire posts facing inboard. Yes/no?
@mazzdesigns6929
6 ай бұрын
Thanks for watching. We don’t recommend removing the binding switch as the button is not used but one time in most situations. The juice is not worth the squeeze for me. Definitely not a bad idea to check your work before heat shrink!
@hpnc81
2 ай бұрын
Yea boi!
@KurtsRCs
Жыл бұрын
Great video. You can put some shrink tubing on the alligator clips so they won’t scratch anything
@mazzdesigns6929
Жыл бұрын
Thanks Kurt! I like living on the edge tho! 😂
@gibsonlife573
Жыл бұрын
Thanks man
@mazzdesigns6929
Жыл бұрын
Yes sir anytime thank you for watching!
@keldonator
Жыл бұрын
Would be nice to have the wires go back over the top of the receiver. Thanks for sharing
@mazzdesigns6929
10 ай бұрын
🤘
@bestpokerrakeback
5 ай бұрын
great video, thanks for sharing ... will a Flysky GT3 (AFHDS2A) 2CH transmitter work with this receiver? thanks :)
@percivale6511
2 ай бұрын
Have you tried these with the RadioMaster MT12 4in1 by chance?
@rcaddiction1956
Ай бұрын
😂❤
@braddahdussifyoumuss596
4 ай бұрын
Man my receiver just shuts off whenever it gets a little hot 🤷🏼♂️ took heat shrink off and still shuts off
@anthonypaladino2680
10 ай бұрын
Hi there I have this same receiver can I use it for a drone build ?
@mazzdesigns6929
9 ай бұрын
I’m not sure my man I am not familiar with drone products
@4reelfishing635
Жыл бұрын
I used the bind plug on mine have same steps though. Have you seen the 5 channel or tried it
@mazzdesigns6929
Жыл бұрын
I have but I never use more than 3 channels myself so the 4 is adequate. Thank you so much for watching as well!
@robertperciballi4476
9 ай бұрын
I’m planning on running this with a Losi Mini B RC Car - anyone have any range issues?
@mazzdesigns6929
6 ай бұрын
You will not have range issues for running on a track
@PitterPatter93
Жыл бұрын
Is anyone having a problem with their servo lagging with this reviever?
@mazzdesigns6929
Жыл бұрын
No sir never encountered that problem. Hopefully someone can shed some light for you! I would swap parts and transmitters out first
@cardboardcrawlersrc8805
Жыл бұрын
You said bored
@mazzdesigns6929
Жыл бұрын
Did I?
@Shane_S.
Жыл бұрын
Great video man! Im going to be switching all of my 24's over to these receivers! 🦾🦾🦾
Пікірлер: 47