Buy it on Amazon: ☑️ Focusrite Scarlett 4i4 (3rd Gen): geni.us/scarlett-4i4 If you don't need a lot of inputs and outputs, you might want to check out the cheaper Scarlett Solo instead: ☑️ Focusrite Scarlett Solo: geni.us/scarlettsolo-3rd-gen ✔ VST & Effect Plugins: pluginboutique.com/?a_aid=5d496680b59cd ✔ Premium Loops And Sample Packs: www.loopmasters.com/?a_aid=5d496680b59cd 🎹 Do you need professional feedback on your music or perhaps mastering? Check out my gigs on Fiverr: www.fiverr.com/firewalk -------------------------------------------------------------------------------- RECOMMENDED STUDIO GEAR: (Amazon links below) REFERENCE HEADPHONES: AKG 612 PRO: geni.us/akg-k612pro Beyerdynamic DT 990 PRO: geni.us/DT-990-pro REFERENCE MONITORS: 5": Yamaha HS5: geni.us/Yamaha-HS5 7": Adam Audio: geni.us/Adam-Audio-T7V 8": Yamaha HS8: geni.us/Yamaha-HS8 SUBWOOFER: KRK 10S2 V2: geni.us/krk-10s2v2 MICROPHONE: Audio-Technica Cardioid Condenser Studio XLR Microphone: geni.us/at2020microphone Vocal recording booth/stand for microphone: geni.us/microphonebooth XLR CABLES: TISINO 35 ft Balanced XLR cable for mic: geni.us/xlr3ftoxlr3m Monoprice 6 ft Balanced XLR Cable for monitors: geni.us/monoprice104761 SHORTCUT KEYBOARD: Backlit FL Studio Shortcut Keyboard: geni.us/flstudio-keyboard Get The Complete Idiot's Guide To Music Theory Here: geni.us/idiotsguidemusictheory As an Amazon Associate, we earn from qualifying purchases. ❤ Support this channel on Patreon: www.patreon.com/firewalkmusic ❤ Support us with a one-time PayPal donation: www.paypal.me/firewalkmusic
@aemythjensen
2 жыл бұрын
I also have a 2i2. Actually I have 2. The loopback option for the 4i4 is a convenience but you can accomplish the same thing and much more using Voice Meeter which is free.
@FireWalkMusic
2 жыл бұрын
@@aemythjensen The loopback function is a "nice to have", but as you say, you can do the same thing with software. The main difference between the various audio interfaces is mostly the inputs and outputs. When it comes to sound quality, they're all good and there's really no noticeable difference there. :) The solo for example is very similar, except that it has fewer in and outs, and a shared circuit for headphones and monitors in order to drive down the cost. :) I've seen some people find it annoying that you can't control the headphones separately on the solo, and in that case, a 2i2 or a 4i4 for example could be an alternative. :)
@LoneTinaja
Жыл бұрын
Thanks for the review. I’m considering the Focusrite 4i4 (3rd Gen) or Motu M4. Did you rule out that Motu or other Motu models for some reason? Are there reasons why you prefer the 4i4 over a Motu M4 or M6? I haven’t yet been able to find out if 1 is more reliable than the other to work properly for years without developing a major problem that pretty much makes the unit worthless. As we know, the Motu M4 & M6 have LED meters. An owner reported that right of the box some of the pixels didn’t illuminate on his M4. Do you know if that type of problem tends to get worse over time? Regarding the Focusrite knob for setting recording levels, do you know if the LED rings showing green, yellow & red tend to go out over time? Do you know what is the most common hardware problem that makes 4i4’s pretty much worthless because it would be too expensive to repair? A reason I am considering Focusrite is because the warranty is 3 years. Do you know if Focusrite has a good or bad reputation for standing behind their stated warranty? Thanks for your help.
@FireWalkMusic
Жыл бұрын
@@LoneTinaja Hi! Those two are very similar in terms of specs. The two major reasons I went with the 4i4 is because I have experience with Focusrite going years back, and I know them to be reliable over time. It's also cheaper than the M4, but still has the same features, except for the LEDs. However, I've tried the M4 before and didn't really find the LEDS to be particularly useful. It's more of a gimmick. The LEDS on the 4i4 work well and gives you all the info you need, and I haven't experienced them going out over time. I can't say anything about repairs because I wouldn't know, as I've never needed to have mine repaired. I did have some problems with a Focusrite SOLO that I tested a few years ago though. Turned out I had accidentally installed the wrong driver for it, so it was my own fault. Anyways, I contacted Focusrite customer support and they were very fast to reply, and really helpful in solving the issue, so their customer support was top-notch, which is another reason why I stuck with Focusrite for my latest audio interface. :)
@LoneTinaja
Жыл бұрын
@@FireWalkMusic - thank you so much for your reply. It is important for me to read that you didn’t find the M4 LEDs to be particularly useful, plus the 4i4 LEDs work well. So, I’m ruling out the M4. Thanks again.
@KE-nx2xg
2 жыл бұрын
Great vid! I had no idea about the loopback function. That could really change your sampling flow! Thanks for this
@FireWalkMusic
2 жыл бұрын
You're welcome. Glad you found it helpful 😀
@Chalisque
2 жыл бұрын
You can get something like Voicemeeter for capturing output no matter your audio interface.
@joinslayer
2 жыл бұрын
I have the 2i2 and i feel it's perfectly enough for my needs. I was a bit unsure if i would like to have an interface without monitors-headphones switch, but i soon realized how well it can be done by adjusting the volume knobs.
@FireWalkMusic
2 жыл бұрын
That is a good audio interface too. It gets the job done 😀👍
@kickasscorm
8 ай бұрын
Literally, the perfect review! I look forward to using mine. Thank you
@MetalDetailer
Жыл бұрын
I have the 1st gen 2i2. Learned about the clipping issue’s a little late. I read that since the gen 2&3 came out they rectified it. So now to expand more I’m really leaning towards the 4i4. I love the features it has. This video helped sway me towards it more. Thank you!
@FireWalkMusic
Жыл бұрын
Glad you found it helpful 🙂
@Eng202
Жыл бұрын
I switched from the 2i2 2nd gen to this 4i4 3rd gen because the 2i2 2nd gen has no midi connections. And YES, THERE IS A MAJOR SOUND IMPROVEMENT IN THIS AUDIO INTERFACE. I'm happy with it.
@ezmirkasmala3125
Жыл бұрын
Hi! Thanks for the presentation! Can we plug two mono hardware stuff in the line inputs behind, instead of one stereo synth? Like one drum machine plugged in 3 and another synth in 4 (both being mono then). I wanna be able to record 4 audio channels at the same time Thanks!
@Edgarcoste
11 ай бұрын
I have the same question. Could you figure it out ?
@ezmirkasmala3125
11 ай бұрын
@@Edgarcoste Yes, I finally bought the 5i6 I believe (4 audio front and 6 line behind). The Focusrite software is great to manage what you plugged into the interface. So if you buy the 4i4 make sure the instrument you want to plug in line (behind) has a volume knob so that you won't be limited (compared to the audio input front where you can adjust the volume directly on the interface). Hope that helps!
@claudioagmfilho
6 ай бұрын
🇧🇷🇧🇷🇧🇷🇧🇷👏🏻, Awesome video!
@YohhananMusic
2 жыл бұрын
Exactly I have the same audio interfaces (booth like you. :) My very big problem (but this is the only one) of the 4i4, that many times, and I don't know why, doing that, if I listening music on Winamp or KZitem, or using FL Studio, if it finds any "ghost" frequency (I can't describe it better :D ) that it perceives to be harmful to the speaker or what, it will suddenly switch off for a few seconds and then switch back on by itself. Very annoying, especially if I'm in the flow. Do you have any solution for this?
@FireWalkMusic
2 жыл бұрын
There's no built-in circuitry for that. It's probably being caused by something else in your setyp. I've found that in most cases when people have problems with playback in windows, or find that a track sounds different after being rendered out from their DAW, it's usually being caused by some third-party application like sound enhancers, 3d sound etc. :)
@SilvvaOfc
7 ай бұрын
I'm using Audiobox 96 presonus and honestly l can't use the interface driver because of that crackling sound regardless of the buffer size... What could be the possible issue maybe
@MidWestHustle465Grind
7 ай бұрын
bro how do I turn on the air on my interface? and how do I download the software that you're using in the video ??? ive been looking and you have the closest video to what im looking for but just not quite
@natearchuleta2003
9 ай бұрын
Your diction reminds me of the how it's made voiceover guy. I thoroughly enjoy it.
@opticalman6417
Жыл бұрын
you want rme or uad high end audio interface anything cheap wont cut it for decent sound that true to what your hearing
@jareddrogose1470
2 жыл бұрын
I have a scarlet solo. It works well for what I need, but thank you for this review as I expand with my music.
@FireWalkMusic
2 жыл бұрын
The solo is good too. It works well for most "in the box" producers, which is the typical fl studio user. The main difference is that the solo has fewer inputs and outputs compared to the 4i4, and no loopback function. The solo also has a shared circuit for the monitors and headphones, while the 4i4 has a dedicated headphones circuit and volume knob for the headphones. :)
@dMATb
4 ай бұрын
Can I use this on Logic Pro with different outputs about metronome listen cause?
@errepeoficial
10 ай бұрын
My friends and I want to start a podcast, there is 4 of us, could I connect 4 mics to this audio interface?
@FireWalkMusic
10 ай бұрын
The Focusrite Scarlett 4i4 has only two XLR/TRS combination inputs on the front, which means you can connect two microphones simultaneously. If you need more microphone inputs, you might want to consider a larger audio interface with more input channels.
@errepeoficial
10 ай бұрын
@@FireWalkMusic thank you very much !
@FireWalkMusic
10 ай бұрын
@@errepeoficial you're welcome 🙂
@supastylez
2 жыл бұрын
can we use this with OBS Studio to live stream with the Scarlett driver on with low latency?
@krisb853
Жыл бұрын
Yes. You should be able to live stream with it. I have a 2i2 Gen 3 and I use it to livestream. It is most likely that you would be delaying the audio anyway to match the video. I do not know the delay of the interface. Sorry for the late response. Our brains automatically fix the delay of sound up to a certain point.
@peanuttheamericanakita9485
Жыл бұрын
FYI: Everyone told me I can't hook this up to a TV, even the people at Guitar center where I purchased mines. I have a 2022 Sony tv and I got lucky and it worked and now I'm able to hook my new studio speakers to my TV.
@chazcarpenter1559
Жыл бұрын
Yeah i have a 2022 LG C2 tv and im trying to figure out how to use this with adam audio studio monitors with my xbox and TV
@it-is-I-here-2727
Жыл бұрын
great video - I JUST ordered one of these 4i4's a few days ago so learned lots already -
@FireWalkMusic
Жыл бұрын
Thanks! Glad you found it helpful :)
@JRD876
Жыл бұрын
Great Video Bro I had to subscribe
@FireWalkMusic
Жыл бұрын
Glad you liked it 😀
@funKdatFPV
7 ай бұрын
Can I run a older cassette recorder to the input 1 on the front of the unit using a dual RCA to single XLR? Im a bit confused about the front inputs.
@neovincibeats
Жыл бұрын
How can I route the audio from MPc 2000 INTO MY CARLETT AND HEAR IT THROUGH my scarlett for playback
@Step91
Жыл бұрын
Does Windows recognize 2 different lines out? Output 1/2 and Output 3/4? I want to plug speakers at 1/2 and subwoofer at 3/4 so I can EQ them separately in Equalizer APO. I don't care about software routing and DAW, I need Windows itself sees all 4 outputs to work properly in Equalizer APO. Thanks.
@henryijeoma
2 жыл бұрын
I have the 2i2, but I've noticed that it doesn't drive my monitors loud enough compared to my Apollo Twin X
@FireWalkMusic
2 жыл бұрын
I've tried many audio interfaces over the years, and there are always subtle differences in the output gain, but I've never found it to be really noticeable. I have both my monitors set at 50% volume, and even when playing quite loud, I never seem to go beyond 50% on the monitor knob on the audio interface. If I were to crank up both the monitors and the audio interface knob near max, I would probably end up with permanent hearing loss, or I'd blow out the speakers :) I find it strange that you're not getting enough volume. Sounds like there must be something wrong with your audio interface, or perhaps some of the settings in the software have been changed so that the output is too quiet. What kind of monitors are you using?
@mellivebrown28
Жыл бұрын
Very informative and well explained! Excellent work! Subscription done!
@FireWalkMusic
Жыл бұрын
Thanks, glad you found it helpful 😀
@sirvaant
3 ай бұрын
Note: when I first recorded in the loop playback 1-2 and two in my DAW, I got a really loud disturbing noise I figured out you have to hit mute on that track to avoid damaging your speakers or your ears!
@OhinSchlesner
26 күн бұрын
Thats whats happening to me. Did you solve the problem.
@sirvaant
26 күн бұрын
@@OhinSchlesner yes you have to hit mute on the track because it’s looping back to that channel causing feedback once you hit mute on the track you’ll be fine.
@eddieadonis9495
Жыл бұрын
There’s no factory reset. My interface is stuck/jammed with all light lit up and cannot be fixed. Not even the suggestions on the focusrite website was of any help
@nah7612
Жыл бұрын
do 250 ohm headphones sound good on this
@FireWalkMusic
Жыл бұрын
USB-powered audio interfaces have limited power frmo the USB port and they officially support up to 200-ohm headphones. I've used higher-impedance headphones than that in the past though, so 250 ohms shouldn't be any problem. It might be slightly quieter, but it will still be plenty loud. Once you get up to 600+ ohms then I would start thinking about getting an external amp.
@nah7612
Жыл бұрын
@@FireWalkMusic do you know any dac and amp combos that come to same price as scarlet ? I jus don’t wanna buy this interface and then it has the same problem as my current behringer u phoria umc22 we’re it’s all quiet loads of popping and distortion even at low volumes
@jgaming4x619
6 ай бұрын
how do i turn the air button on
@keychainzindigo
2 ай бұрын
Are you ready? Follow ✅
@lukogs
Жыл бұрын
Can it record all inputs individually or it'll combine it to a single track like in beginner USB mixer? My inputs would be 1 singer (1 🎤), 1 violin (1 🎤), 1 Indian percussion (2 mic - left & right side of the instrument).
@therealwolfspidertoo
Жыл бұрын
Honestly the 2i2 is enough. Also like the fact that the 2i2 allows you to switch the air setting by hardware rather than software. This is especially useful if you're a Linux user and using a third-party DAW.
@Fistful0fSteel
Жыл бұрын
I have a 3. Gen 2i2 + Fishman Fluence pickups + Amp Sim. These in combination will take all its headroom. Questions: 1. Should I upgrade to the Scarlett 4i4 that has a pad (or another interface with pad) 2. Should I get a DI Box to attenuate 3. Can I just turn down the Amp Sims input and output to stop clipping? Best regards!
@henryijeoma
2 жыл бұрын
Do you have any experience with the Apollo Twin X? I heard it works best with Apple computers and sucks on windows
@FireWalkMusic
2 жыл бұрын
I haven't tried it myself. It's supposed to be good but it's also quite expensive so I wouldn't expect anything less. :)
@FireWalkMusic
2 жыл бұрын
Regarding problems, I usually see people having various problems with most audio interfaces. It's usually due to some kind of conflict, using the wrong driver etc. In some cases the driver simply isn't any good, but this will usually get resolved by an update, and is usually something you risk if you buy a brand new product. If you buy something that has been on the marked for a while then at least you can rest assured that the driver is good (usually). As for the Apolli Twin X, I see some people praising it, and others talk about crackling sound. It could very well be the same thing I'm experiencing if the asio buffer is set too high. It might simply be a windows issue, because it does occur in the DAW, only in windows. Reducing it to default takes care of the problem.
@digimoz7788
2 жыл бұрын
Exactly what I needed, thanks!
@FireWalkMusic
2 жыл бұрын
You're welcome 🙂
@timfranklin6596
Жыл бұрын
I love the unit but I wish they added an ADAT interface. I had an old FireWire unit with similar features but had the ADAT interface. You have to got up to the 8i... to get ADAT. Kind of a bummer.
@twintornadoestravel1119
Жыл бұрын
Question. I want an interface that will allow me to insert outboard gear into the signal from FL Studio. Is that what the hardware inputs are all about? I don't need a lot of physical ins and outs, but I do need enough channels to allow for looping through my favorite hardware.
@nenadjovicevic3563
Жыл бұрын
Hello, does anyone have an idea how to remove the noise on my 4i4 interface when recording instruments. I don't have it on the microphone. Thank you so much.
@dyaaong6030
Жыл бұрын
Man I sick of this shit keep disconnecting and connecting now I cant get any sounds through my monitors.
@takeflightleakz8449
8 ай бұрын
Can i use this to connect 2 pairs of studio monitors both to play simultaneously?
@opticalman6417
Жыл бұрын
let get something stright her people get them like krk rockets becuase their cheap not becuase their good
@chazcarpenter1559
Жыл бұрын
Trying to figure out how to use this with my xbox, tv, and adam audio studio monitor. Not sure how to set it all up
@eriknagtzaam
5 ай бұрын
Thanks man
@negvey
2 жыл бұрын
I have Scarlett 2i2 & still get cpu lag when recording midi, whats a better option to avoid this problem?
@FireWalkMusic
2 жыл бұрын
Make sure you are using a USB 2.0 or 3.0 port, and that you are using the provided asio driver (Focusrite usb). Set the buffer as low as you can. Don't use the fl studio asio driver as it's a kind of hybrid driver. Usually, when people experience lag it's either the settings or the computer itself is simply not fast enough. :)
@negvey
2 жыл бұрын
@@FireWalkMusic omg I figured out my problem, I never had the drivers in the first place!!!! this whole time I was recoding with 100 ms, this video helped me out so much, thank you!!!!!
@FireWalkMusic
2 жыл бұрын
@@negvey Awesome! Glad you finally got it sorted 😀👍
@szastubeats
Жыл бұрын
And No direct monitoring knob
@doubledown4957
Жыл бұрын
Can you connect 2 mics and 2 instruments and record?
@GnosticXMusic
Жыл бұрын
How do I record with the inputs 3 and 4? They won't show up in my DAW (audacity and Mixpad Multitrack). Only 1 + 2 show up.
@doubledown4957
Жыл бұрын
Have you find the answer to this?
@GnosticXMusic
Жыл бұрын
@@doubledown4957 yes, ty
@williamrivera6818
Жыл бұрын
I’m having like a shhhhhhh sound like rain
@music_creator_capable
2 жыл бұрын
Nice !
@FireWalkMusic
2 жыл бұрын
Thanks 🙂
@joshbrolicwright
Жыл бұрын
I have this and I like it
@FireWalkMusic
Жыл бұрын
I'm using it myself now. It's a good audio interface for sure :)
@pinkaverse9468
Жыл бұрын
it is possible to have 4 guitars on 4i4 ?
@johnnyanko6051
Жыл бұрын
Good review, thanks!
@FireWalkMusic
Жыл бұрын
Glad you found it helpful 😀
@luissalazarweil9775
Жыл бұрын
Does this work on M1 Macs?
@JostSchwider
2 жыл бұрын
👍 - _also_ for the YT algo! 😊
@FireWalkMusic
2 жыл бұрын
Thanks! :)
@googleboughtmee
Жыл бұрын
Wait where's the Direct Monitor button
@JorgOnline1
Жыл бұрын
I was looking for that too, i don't see one.
@thomasfroland762
2 жыл бұрын
Thanks
@FireWalkMusic
2 жыл бұрын
You're welcome 🙂
@Fartinhalerr
Жыл бұрын
I got this thing a few months ago, I upgraded from the 2nd generation solo. I HATE THIS THING!!
@FireWalkMusic
Жыл бұрын
Hi, what do you hate about it?
@Fartinhalerr
Жыл бұрын
@@FireWalkMusic I hate that the control panel is so limited. I'm trying to reamp and I can't seem to control what is being sent to output 3. It's sending the main audio from the daw when I want to be able to just send specific things for reamping. For instance I'm trying to reamp bass but somehow my drums are being send to my amp. Just annoying
@FireWalkMusic
Жыл бұрын
@@Fartinhalerr I see. there's not much in terms of physical controls. Even the air button from the solo has been removed. It's probably to keep the price down. All the routing and such has to be set up from the Focusrite control software.
@BookyourSinger
2 жыл бұрын
Hey buy 1 for me too ..
@FireWalkMusic
2 жыл бұрын
😆
@BookyourSinger
2 жыл бұрын
@@FireWalkMusic Kidding ... Already have one 😃😃😃 but Thank you for sharing valuable information
@FireWalkMusic
2 жыл бұрын
@@BookyourSinger you're welcome 😀
@defeatconformity478
Жыл бұрын
Great review! My only issue with it is I get static when adjusting the volume knob. Was thinking of switching to one of the Apollo Twin/Solo
@juicyjay3338
Жыл бұрын
Sounds like you have dust in your pot
@theDanyaProduction
Жыл бұрын
Or a ground loop
@undercrackers56
Жыл бұрын
So close and yet so far. If only it had four pre-amps and two headphones. That would open up it's appeal to more organic music and not just the bedroom EDM people.
@XMetalChefX
Жыл бұрын
Luckily they have a model in this range for that!
@afridifacebook
2 жыл бұрын
Thanks!
@FireWalkMusic
2 жыл бұрын
You're welcome :)
@thorny7138
2 жыл бұрын
I do have one question. Am I able to listen through my computer headphones if I do not have 1/4" headphones? Like bluetooth headphones. Your video is great and answered all of my questions except that one.
@jasonreales3840
Жыл бұрын
Bluetooth wouldn't be all that recommended if your using them to mix your work due to the latency. The headphone input is recommended and listen through the monitors/speakers
@thorny7138
Жыл бұрын
In my current living situation I don't really have much of a choice so... I take that as a no.
@thorny7138
Жыл бұрын
Update: I got it to work.
@jasonreales3840
Жыл бұрын
@@thorny7138 what you end up doing?
@thorny7138
Жыл бұрын
I feel really dumb. All I needed to do was set it to playback through the software I'm using (Audacity) and I can use whatever headphones I want through my computer. Slowly figuring this stuff out, emphasis on "slowly". lol Thank you for the lightbulb moment!
@FriendlyNeighborhoodBallsack
6 ай бұрын
why do you use a robot voice for your voice overs? just talk yourself lol
Пікірлер: 124