I just got the go press and foil machine and your video was very very helpful!!! Thank you. I haven't seen the dies used upside down like this but that's great. This machine is even more versatile then I thought.
@rhondakennedy819
2 жыл бұрын
So cute. Love it. Thank you for the tips
@newkidfish
2 жыл бұрын
You are welcome 😊
@elizabethturnbull1537
5 жыл бұрын
Hi, another great use for dies! I’m loving your videos and ideas for the go press and foil machine especially the finished project made into a card, thank you. Regards.
@lindathrogmorton1427
7 жыл бұрын
I was so happy to find your video using the dies flat side down. I was amazed to see all the beautiful detail of the die actually foiling. Beautiful!
@chatgirlai
4 жыл бұрын
Love it. Beautiful! Thank you for the tips.
@kevindowney9514
7 жыл бұрын
Loved it Cathy. Thanks for show us a whole new way with the Gopress and Foil...it looks so easy, I might take up art again!
@newkidfish
7 жыл бұрын
Thanks Kevin, yes take up art again...good for stress relief!
@luv2gypsy
7 жыл бұрын
Beautiful Card!!!Thank you for showing the process of making your card. I am on the fence for the GoPress and Foil Machine, but you showed me even another way of how to use my dies I have to make it even a more much needed tool in my arsenal. :) Your coloring is beautiful!!!!
@newkidfish
7 жыл бұрын
Thanks Trish, it really is a versatile machine!
@IAMGiftbearer
5 жыл бұрын
Beautiful card!
@newkidfish
5 жыл бұрын
IAMGiftbearer thank you so much
@kckid68
6 жыл бұрын
Beautiful topper! Thank you for the technique.
@McDory
7 жыл бұрын
Hi Cathy, My machine arrived today so really looking forward to trying it out very soon. I have different thicknesses of dies so look forward to results. I really thought I had made an impulsive buy. Many thanks for giving me faith in myself😂😂
@newkidfish
7 жыл бұрын
Have fun playing with your machine, hope you like it as much as I like mine!
@sharonbessell6391
6 жыл бұрын
Great information... but I am wondering how you removed the splashes of foil that were in the centre before you stamped on it?
@paularae6324
6 жыл бұрын
Sharon, use an art eraser. Comes off easily. I erase my extra foil right after the initial foiling, as I think it comes off better while still a bit warm...
@newkidfish
6 жыл бұрын
Hi good question, I think this is covered in another of my videos somewhere... but to answer your question just use a soft eraser whilst the card is still wam and it will come off, any stubborn bits I use a grey pen eraser ( but lightly ) 😊
@jomorgan48
6 жыл бұрын
I have been attempting this method but am striking a problem. The foil is also adhering to the paper where there is no die, both on the inside and the outside of the circle. I am in Australia. I would appreciate your help.
@newkidfish
6 жыл бұрын
Jo Morgan the sandwich for the die machine can vary depending upon your machine, suggest running through your die machine but remove the lid of the foiling plate and use a thinner plate. Alternatively you can die cut the shape 4 x glue them on top of each other then use this as a home Made foiling stamp. Will do a video soon on this 😊
@annbailey7520
5 жыл бұрын
Thank you for showing us
@newkidfish
5 жыл бұрын
Ann Bailey you are welcome x
@paularae6324
6 жыл бұрын
To get rid of the extra foil in the center of the image, use an art eraser; the extra foil comes off easily while still warm...
@joylane5560
7 жыл бұрын
Thank you! Great demo, lovely soft voice that doesnt grate on my teeth!
@newkidfish
7 жыл бұрын
Thanks for such a sweet comment x
@darleneroach2848
6 жыл бұрын
Love Your Project. Foiling is an extra touch that makes our design layouts Pop. Is the Go Press and Foil V2 available in US Yet? I could not find it...
@newkidfish
6 жыл бұрын
darlene roach Hi I will ask the USA distributor and let you know when he responds, it may be a week or so as I believe he is on holiday with his children
@darleneroach2848
6 жыл бұрын
Much appreciated!!!
@newkidfish
6 жыл бұрын
darlene roach sorry for delay n response I have been unwell, I checked with Couture and was advised that the V2 machine was an exclusive product to Create and Craft and was not going to be rolled out to stores and other retailers, instead they are offering in the near future an upgrade kit which will consist of the thicker metal plate (available separately now) and the gridded lid. To be able to use the new cut and foil stamps all you would need is the metal plate, so recommend you just get this with the original machine, that is what I have done, I then plan to get a gridded lid in the future at some point.
@McDory
7 жыл бұрын
Hi Cathy, Just waiting for my machine to arrive and think I have perhaps purchased wrongly as the only die cutting machines I have are electronic for arthritis reasons. Can you please help me here. Many thanks. Jeanette
@newkidfish
7 жыл бұрын
hI Jeanette, I believe that the Go Press & Foil works with other machines too, so long as you can use your machine with the thicker dies then it should still work
@pamokgirl4894
7 жыл бұрын
Hi Cathy, I'm waiting for my machine to arrive and can't wait to try your technique. I noticed your metal plate got pretty dented with this first attempt. Has your metal plate been able to keep on producing good foiling as it got more dented? And do you feel the metal plate is protecting the surface of the platform from getting ruined? I'd love to use this technique a lot since I have a zillion regular dies but am afraid of ruining the base platform surface. Thanks for sharing and I'd sincerely appreciate your feedback!
@newkidfish
7 жыл бұрын
PamOK Girl hi Pam, I have only used the metal plate about a dozen times as I have had other non foiling commissions that I have been working on, but it seemed to still work ok for the ones I have done so far. I do believe you can buy the metal plate separately if need be so will probably keep one for foiling and one for cutting.
@pamokgirl4894
7 жыл бұрын
Hi Cathy, I actually saw your video a couple of weeks ago and based on it I bought 2 metal plates just in case. So I'm ready to go once my machine arrives. I'm mainly concerned about damaging the machine's surface but it doesn't seem to be an issue for you so I'm going to give it a try. You really opened up the possibilities for me, thank you very much!!
@shellysalzman3686
6 жыл бұрын
Quick question- I mistakenly bought the foil for this machine and am wondering if I can use it in the Minc?
@newkidfish
6 жыл бұрын
Shelly Salzman hi good question this is a special heat activated foil so won’t work in a minc machine as the minc uses a foil that works/sticks with toner medium which is totally different. Sorry maybe the shop you bought it from might consider exchanging or refunding you ?
@dlinton4870
7 жыл бұрын
Thank you for the video. I haven't been able to find many for the Go Press and Foil. The version sold in the US doesn't have the metal shim, so I'm going to have to look for one to use once I get my machine. Thanks for all the tips.
@newkidfish
7 жыл бұрын
Hi the metal shim doesn't come with the Go Press and Foil machine it is sold with the Go cut and Emboss Machine but I believe you can also purchase it separately
Пікірлер: 42