What kind of repair tools do you use to deal with FACE ID issues? Try to leave a comment below.
@zinxDpeace
4 жыл бұрын
To fix dot projector just transfer encryption chip?
@pr0xZen
4 жыл бұрын
@@zinxDpeace This I wonder too. Only that encryption chip, or must it be matched with any other components as with other complex transplants?
@vac_ban5972
4 жыл бұрын
Hello, if you see a message, please write. I am from Russia, an aspiring repairman. Your videos are amazing, but translation suffers, and older videos don't. I am ready to help with translating all videos into Russian and correcting new ones. Or you can try to make voice acting. At your discretion. Thank)
@niels9663
4 жыл бұрын
This. Is. AWESOME!
@ROKEY88
4 жыл бұрын
Finally someone came up with an idean of repairing face id...
@MacLabUA
4 жыл бұрын
Laughter Therapy look faetrain videos!
@ROKEY88
4 жыл бұрын
@@MacLabUA what??? Is it a channel ...?
@DasShineX
3 жыл бұрын
It's been around for a while. REWA has at least 10 videos on face id issues that was using microsoldering though. This is so much more efficient.
@360themaster
4 жыл бұрын
👏👏👏 awesome how they are finding ways to preform transplants of those key components to a new flex cable bringing back The functionality of FaceID! Great job 👍
@rewatechnology2008
4 жыл бұрын
Thanks for your watching and hope it helps you somehow :)
@Drew-Speare
4 жыл бұрын
I recently found this page and it as been a lot of help thank you
@rewatechnology2008
4 жыл бұрын
Thanks for watching :)
@rev_kous9275
4 жыл бұрын
Definitely, you are a genius to make some amazing tools for the repairs that are normally impossible.
@aqib2000
4 жыл бұрын
This is actually very well designed
@sharfazhameed6382
3 жыл бұрын
These guys are simply the best
@ashrafgtx687
3 жыл бұрын
THANKS FOR WRITE ARABIC
@MiguelAlvarezAdams
4 жыл бұрын
Very nice
@JAB227
4 жыл бұрын
I'm so getting this for my store
@eim6020
4 жыл бұрын
The price is awesome
@m21_edy
4 жыл бұрын
thaks for these infraction
@mehdijamali9197
3 жыл бұрын
awesome
@ThePawciohd
4 жыл бұрын
it is possible replace dot projector ?
@tech2new
4 жыл бұрын
I wish i can have this wonderful toy's
@yazanarmoush
4 жыл бұрын
Can they/someone try to just transplant the encryption/decription chip to a new Face ID sensor? It will make the repair way easier if it is possible!
@MacLabUA
4 жыл бұрын
Yazan Armoush faetrain did it
@iam.loopexx
4 жыл бұрын
i had watch REWA another video face id repair using hot air guns,iphone x earpiece speaker ribbon had a little torn..so i decided to change old ribbon to new ribbon...i followed all step to change flood iluminator and ambient light sensor but i stuck because the new ribbon soldered and glue it hard the ambient light sensor.. can't remove it easily,need more time to blow hot air guns but it also damage the ambient light sensor due to excessive heat.. can't force to pull it because it will tear it..i just success to change flood iluminator only.. ambient light sensor RIP..so,i just place it back and face id repair not success..
@mobilyphone88
4 жыл бұрын
Awesome
@VishnuVlogger865
4 жыл бұрын
Congratulations 🙏🙏🥰🥰🙏🍎🍎
@tronixfix
4 жыл бұрын
Pls try to develope a programmer for the face id... would be nice to just change it out and programm it like the true tone.
@kumarbhatia6566
3 жыл бұрын
I think the new tool from i2c does this. Called face id but trying to confirm with their factory.
@vac_ban5972
4 жыл бұрын
Hello, if you see a message, please write. I am from Russia, an aspiring repairman. Your videos are amazing, but translation suffers, and older videos don't. I am ready to help with translating all videos into Russian and correcting new ones. Or you can try to make voice acting. At your discretion. Thank)
@rewatechnology2008
4 жыл бұрын
Hello, thanks for your kindly support :) Can you contact us at marketing@rewatechnology.com ?
@vac_ban5972
4 жыл бұрын
@@rewatechnology2008 You are a little mistaken in the name of the mail)
@rewatechnology2008
4 жыл бұрын
@@vac_ban5972 Thanks for the notice and it has been corrected!
@vac_ban5972
4 жыл бұрын
@@rewatechnology2008 Already sent ;)
@pr0xZen
4 жыл бұрын
Does this heating platform come with temperature calibration ability? Also, is there an alignment jig available when joining separated dual layer logic boards, to make sure the top layer doesn't move?
@Wilson84KS
4 жыл бұрын
Yeah, definitely a clamp is missing, for desoldering you can press it onto the plate, but for resoldering you can't. REWA is amazing, no doubt about it, but this tool isn't that good and ways too expensive, you can simply make your own, just get a hair straightener, take it apart, bring it in a comfortable form and there you have two small heating plates with precise temperature control up to 250°C, if you know someone that has acces to a CNC machine, you could get some forms with clamps so it has an actual use and the deepening isn't just for looks.
@arvin2360
4 жыл бұрын
I'm still waiting until they found a solution to repair a damaged dot projector... I believe on them, why? . . . . . . Because they're not APPLE
@AAEAFF
4 жыл бұрын
It could be fixed in Huaqiangbei now.
@arvin2360
4 жыл бұрын
@@AAEAFF Oh really? I thought it's still impossible , thanks!
@MacLabUA
4 жыл бұрын
arvin kosasih faetrain did it
@KJFNCFJGF
3 жыл бұрын
can you send me catalogue of what you have..
@rewatechnology2008
3 жыл бұрын
Please feel free to contact us at sales@rewatechnology.com for any needs.
@twida9
4 жыл бұрын
how to ix earthquake sensor on nokia 3310
@negimobilerepairingkaranpa8004
4 жыл бұрын
How buy in india your other product
@rewatechnology2008
4 жыл бұрын
Hi, quicky ordering can be taken on REWA Shop and the shipping service supports the address of India. Welcome to visit shop.rewa.tech for more products. Please feel free to contact us at service@rewatechnology.com for any helps. Thanks :)
@techmobiletechnology8518
4 жыл бұрын
Please bro reparing video apply
@habeeb_ma_v
4 жыл бұрын
my iphone X is feldown and lcd cracked more nothing to lcd and face lock .i want repair my mobile how can possible ??
@takerouw
4 жыл бұрын
Go to china and bring it to Rewa.. 😂
@habeeb_ma_v
4 жыл бұрын
@@takerouw 🙄🙄😴
@takerouw
4 жыл бұрын
Habeeb Ma in my country there is one mobile repair shop chain that trained by rewa (certified by rewa) and they can repair what rewa can repair (rewa train them with newest technique). I don't know in your country.
@Wilson84KS
4 жыл бұрын
A couple of weeks or maybe even days ago REWA uploaded a video about it, you need a new display, grind down the identification chip on its flex cable, desolder this chip from your original display and replace the one you removed from the new display by grinding.
@Wilson84KS
4 жыл бұрын
m.kzitem.info/news/bejne/wp2nmHyGhF-IpI4
@navabhasan1900
4 жыл бұрын
Sir I want new mother board of Appo A 5s sir please reply it's important
@rewatechnology2008
4 жыл бұрын
For any demands, please feel free to contact us at service@rewatechnology.com Thanks :)
@navabhasan1900
4 жыл бұрын
@@rewatechnology2008 There is no mother board in your catalogue
@Wilson84KS
4 жыл бұрын
I don't think anyone can make lower prices for this repairs than Apple does, maybe in countries where people can live a good life from three dollars a day, but not in consumities, this work takes at least one hour and has big risks to damage something and this grows the price much higher than the actual repair costs. Just give up on Apple, stop buying it, stop repairing it and those who are stupid enough to throw money in those bottomless throats should also simply buy new ones on every little defect.
Пікірлер: 59