Find the items that are used on the Dave Sterl channel in the Amazon shop. www.amazon.co.uk/shop/davesterl
@ronanoneill4480
3 жыл бұрын
I think i have this issue but there loads of oil burning out the back aswell is that the same case ?
@evanlewis4857
Жыл бұрын
thank you for this incredibly detailed video, Dave! This has given me the confidence to try and sort this out myself. I've had a 2011 Ford Fiesta econetic since new, and this exact same injector is just starting to show evidence of carbon. I know a lot of people like to trash these engines, but mine has over 150,000 miles on it and until now has never had a single issue until now. All just regular maintenance and wear and tear items. Hands down the most reliable car I've ever owned, and that includes my Volvo 240. An old diesel mechanic told me when the car was new to just cut the service intervals in half, so the oil/filter gets done every 6 months or around 5000 miles. Seems like it's worked!
@JC-zi8qc
3 жыл бұрын
Dave, another excellent video as usual. I do most of my families car repairs, servicing, broken springs etc, but what you did in this video is demonstrate that are least 6 ways of getting this job wrong! This is one job I would leave to experts like yourself, with the necessary tools and a wealth of experience. Keep the videos coming, I always look forward to them!
@thpxs0554
Жыл бұрын
Best demonstration I’ve seen
@djdave6962
3 жыл бұрын
Thank you so much for showing how to clean a fuel injector for a ford tdci engine ... helped me a lot with my car and the injector problem and saved me 300 pound on new injectors
@davesterl
3 жыл бұрын
Glad it helped
@chriscodona1366
7 ай бұрын
Thanks Dave, very thorough explanation with clear guide... helped me get my injector from my volvo c30 repaired
@Golo1949
Жыл бұрын
That was a master class on how to change the seals, well done. 👍
@robturner7945
2 жыл бұрын
I’m late to your party however….brilliant! Very, very thorough (especially as I currently possess this engine on my grand CMax) 👍🏻
@vw_mods_4711
Жыл бұрын
Great video, just noticed a mountain of tar on injector 3 on the mrs C30 you have given me the confidence to tackle it, love the workmanship and effort gone into this video. Have subscribed 👊👊
@kennedysgarage3281
3 жыл бұрын
It is very nice to see someone who takes pride in their work and what they do, this isn’t around as much as it should be. And explaining every step in great detail. Brilliant Dave 👍👍
@davesterl
3 жыл бұрын
Thanks Peter
@piecetoyou8285
3 жыл бұрын
This is the best description of how to do and don`t ways to aprouch the job in hand, with clear close up with the camera, and great tips , You certainly are mindful to the viewers that they see what you see and this is how it should be illustrated, Thank you for taking up your time to show this work , Question what is the tool used for pollishing the cylinder
@davesterl
3 жыл бұрын
Cheers, polishing tools are in the amazon store
@falconpowerful2362
2 жыл бұрын
Thanks heaps for this. My Econetic is doing exactly this on #4. Once the kit arrives from the UK, I know what I’ll be doing :-)
@barrykimber
2 жыл бұрын
Excellent video, very clear & concise 👍🏼👍🏼
@mechanicmatt871
3 жыл бұрын
That leaking tar makes a real mess, great job on cleaning it up. The spanner work well getting the snap ring slid down the injector. Cheers Matt
@davesterl
3 жыл бұрын
Thanks Matt
@dannzx
2 жыл бұрын
great video very informative "there's no way no way you came from my loins" 😉👍
@fv7765
2 жыл бұрын
I really hated that PSA injection issue on my mum's 307SW, low mileage looks like this..... how bad design is this!
@Itemsbybizzare
2 жыл бұрын
Can a leaky injector cause an underboost problem I’ve already had the egr value changed and it still has an underboost
@Wiltshire-observer
2 жыл бұрын
Brilliant video !, I enjoyed that and very informative.
@kevinblackman9566
2 жыл бұрын
great video dave, very informative.
@davesterl
2 жыл бұрын
Thanks 👍
@EnricoPascucci
2 жыл бұрын
great and useful. Thank you man!
@ryanh3285
2 жыл бұрын
Good video i had the same issue and tightening the bolts seems to have sorted it out at least temporarily this video may be valuable if the problem returns.
@wonkylommiter6364
2 жыл бұрын
Tightening the nuts that clamp down the injector did help mine for a couple of months but the prob will come back. the only way to really cure it is to do what this guy shows in the vid.
@JockeyCake
Жыл бұрын
Thank you this video.
@builtstrongertolastlonger3158
2 жыл бұрын
Very good video and a high level of work standard. Very detailed video and shows the correct way it should be done . You have another subscriber 👍
@jerrydineen6819
2 жыл бұрын
I had 4 cars with this nightmare PSA engine..VOLVO s 40 Peugeot partner Citroën dispatch and a focus.
@michaelrobinson5592
2 жыл бұрын
Good job 👍
@FixItWithJon
9 ай бұрын
Great video Dave. 3 questions: what size was the “wiggle”bolt you used to remove the injectors pls? Looks possibly M12? What was the tool that you used to polish the injector seat (I get that you used a seat cutting set for doing the gentle seat cutting) and what was the pin that you used to block the injector hole into the cylinder while you cleaned the debris out with an air duster?
@brederasmussen3075
7 ай бұрын
Wondering the same about the bolt. The tools are linked in the description I believe
@FixItWithJon
7 ай бұрын
@@brederasmussen3075 got mine off in the end - didn’t need a bolt. In fact, I’m not sure quite how the bolt fits in. I’ve got mine off by wiggling with a 13 mm spanner. Found the sending discs that he used - unfortunately they’re not looked in the description, but are on Amazon
@iansworkshop
3 жыл бұрын
methodically brilliant Dave , and well explained, and demonstrated ,....a go to guide for me if I ever would need to do that on my diesel zafira 👍
@kevinpalmer7452
3 жыл бұрын
Very comprehensive explanation and repair there Dave Some good tips and procedures in there thank you.
@_Brad_D
2 жыл бұрын
Great video - very informative & more detail than we usually see on repairs such as this. Thanks very much for sharing.
@catharinacarroll7908
3 жыл бұрын
I would have more confidence bringing my car to your self ...comparde to my volvo dealer ship... I had the injection seals done by volvo, 25000km the back to □1. I have more confidence to repair it myself after your assembly video.
@mahamedbaciise1975
2 жыл бұрын
Hello, I am very happy with your work, but he has a question. How do you limp if the car can't start? Thank you
@jackmason7823
2 жыл бұрын
Hi Dave, I have exactly this issue with this same model car and engine. How much would I be looking at to get it fixed and are there any dangers to leaving it?
@Mr11ESSE111
Жыл бұрын
on Aliexpress package of seals for this injectors are 6-7 euro
@diella69
2 жыл бұрын
sei un grande fantastico complimenti.
@richardmarkham8369
6 ай бұрын
I have exactly the same issue! So Dave, did the high pressure lines come off easy? Thinking a bottle brush might help cleaning the bore. Great video!
@sergiikopchonov7137
15 күн бұрын
Hello. Could you please tell me how to properly adjust the valves on a PEUGEOT 3008 1.6HDI 2011 eight-valve. Thank you
@Coppice1
2 жыл бұрын
I replaced my injector seals on a 1.6hdi yesterday but i'm now doubting myself that they were covered in oil and not diesel. The car had no symptoms but I'm sure when I 1st saw the fluid it was clear
@PendingNitro
11 ай бұрын
Hello mate so I done all this and when I reconnected the injector up. Car started then died and now won’t run. It’ll tick over but won’t kick in. I Have a Volvo c30 1.6d. Can you help?
@rutendochigama4283
Жыл бұрын
👋 i removed my tank for tdci fiesta 2009 model and also changed fuel filter thenvi started to have airlock the car was not starting then I drove the car without a filter for week then I fixed the airlock now I connected the new filter the car started after putting air from the tank to push the fuel. Now I drive the car but there is small nock sound and smoking dark. When I switch off the engine it doesn't start again
@JerryOneill-ve6fx
Жыл бұрын
Great video Dave. Loved your explanation and the attention to detail. Just did this on our 2009 Volvo C30 1.6D. Couldn't have done it properly without you.
@thedivinetoe
Жыл бұрын
Thanks so much...Best video on this I have seen on KZitem
@benstratford2798
2 жыл бұрын
Great video Dave, thank you! My left-most injector seal is leaking for the 3rd time in as many years... is this down to driving habit or due to it not being done properly the past 2 times?
@mufasa238
2 жыл бұрын
do everything he did, but add this : unthigh the two studs, clean the threads as well as the hole. torque them at the good spec (I can search if you want), for more safety, I recommend adding some loctite 243 (it will stop the oil to leak from the studs, yes it does). then pursue the procedure described by our friend. torque specs are more than important tho, for every bolt.
@gurprabhjot7335
Жыл бұрын
Hello I have Citroen berlingo it’s same problem what expenses you think the reason to ask some of them just try to rip you off that’s all thanks
@grahamlangston2101
2 жыл бұрын
VW ones arnt much better and at 250 pounds each the inpulse coils fail and guss what they are not available separately
@brederasmussen3075
7 ай бұрын
What grease or lubricant did you use to catch the cuttings? Will Molybdenum grease do the job?
@FixItWithJon
9 ай бұрын
Great video Dave. 3 questions: what size was the “wiggle”bolt you used to remove the injectors pls? Looks possibly M12? What was the tool that you used to polish the injector seat (I get that you used a seat cutting set for doing the gentle seat cutting) and what was the pin that you used to block the injector hole into the cylinder while you cleaned the debris out with an air duster?
@ianhill20101
Жыл бұрын
Just had a look at my 2012 mk3 and theres no carbon but i do have a small amount of diesel not sure what seal is dodgy
@maxv146
3 жыл бұрын
i had a oil leak problem, it ended up comming from the injector studs. Replace those and put some liquid gasket on the flat side of the stud.
@johnherron8254
Ай бұрын
Really solid work. Great method of instruction. Fair play to ye!
@OTOKAYAChannel
2 жыл бұрын
Video tutorial bagus,nambah wawasan d otomotif bosku👍
@p.s.7396
Ай бұрын
Der Dichtring war Ausschussware bei der Produktion. Ungleicher Flächendruck, da Loch nicht in der Mitte. Da hatte der Monteur im Werk wohl schlechte Augen oder es war Montag. 😢
@GeorgeBuchan
Жыл бұрын
Hi mine are leaking between spacer and the lock down plate, I’ve replaced seals and cleaned twice?
@evansmarts775
3 жыл бұрын
Did not even watch it yet, but I know it's gonna be good 😎
@littlereptilian7580
2 жыл бұрын
What size is that bolt at 10:00?
@jf5212
Жыл бұрын
Would of liked to have seen the full removal of parts. But helpfull.
@MrMaster2262
5 ай бұрын
can the rocket cover gasket being bad also cause this leakage ?
@Genakrul_93
2 жыл бұрын
Hey, loved your video, followed every stepped and i got rid of "chuffin", could swear that engine is not as loud as before too, but I have new issue, on injector 3 and 4 i have slight diesel leak, have I screwed up something ? :D
@FranciscoArteaga-g9l
Жыл бұрын
Hola Dave te felicito e visto muchos videos de este tipo pero como el tuyo ninguno muchosimas gracias creo que la linpieza y el tapar los injectores es primordial lo que en muchos videos no se ve sige asi me encantas si los mecanicos fueran como tu tendriamos los coches sienpre nuevos. De nuevo muchas gracias
@aziztitouan6487
8 ай бұрын
Hola
@Propolizei
2 жыл бұрын
Hello, can you tell me if I replace all bad diesel injectors with new, in my engine (Ford Focus 1.6 tdci), will it already improve obvious weak power I feel every day, or does't- perhaps if turbine pump is also demaged (during driving with bad injectors maybe). Does setting new injectors with old pump is good solution with no worries in future? Thanks
@فوائدالمعرفة
Жыл бұрын
My friend has a Ford Focus, its speed does not exceed 140 km. After I did the diagnostic , I found that the injecteur number 1 and 3 had a pressure of 0.96. Can you clean them up and get them back to normal?
@Individjual
2 жыл бұрын
Hello, what are the symptoms of this fault, my car 2012 ford focus mk3 1.6 tdci has started to chugg or cough on start up and white light smoke appears from the back side topside of the engine, my engine is clean and there os no symtoms of head gasket white residue, my injectors have been cleaned using liqui moly injector cleaner and i only use shwll V power diesal, i have no idea what the issue is but my hunch is leading to injector seals or maybe fuel pumos or fuel filter, my fuel filter was replaced back in 2020 June time and car has only coversed about 6k miles since then and i have just serviced it about 2k miles ago in August 2021 with v good parts and Mobil 1 3000xe ford focus recommended. Some help would be apreciated thank you feom any engineers and Mechanics.
@piecetoyou8285
2 жыл бұрын
Dave I have chuffing sound but all my injectors have oil around them, When using a listening stepperscope I can`t pin point which one is chuffing, The noisy diesel engine is masking which one is chuffing, May I ask why place microphone around the back if the chuffing comes from the front around the injector? a little confused on that part,
@allonpretorius3874
2 жыл бұрын
Hi There. Is the engine in the video an 8 valve diesel Duratorq engine. My 2013 Ford Fiesta 16l diesel is a Duratorq motor. The egine started making a noise after on of the injectors started over fuelling. Mechanic found that one of the cam journals had scored the cam shaft and recommends that I replace the engine. The pistons are a bit loose in the sleeves but no scoring or ridges. any recommedations
@falconpowerful2362
2 жыл бұрын
To clean the shaft out, would a gun barrel cleaning rod for a shotgun work?
@mikeberry304
3 жыл бұрын
Like the special bolt tool Dave, carb cleaner certainly melts the clinker, sometimes its like bakelite, did same job on a mini diesel , absolutely covered in it , kept spraying it , andxscraping it over a couple of days , but it came out eventually, recut the seat and edge of injector seats, nice and quiet , great video as usual , had the 2nd jab today , stay safe 👍👍
@davesterl
3 жыл бұрын
Aye Mike, need a bit of patience with these jobs, as you say over a couple of days, don't rush it. My 2nd jab in a couple of weeks. Take care
@antonello7349
Жыл бұрын
Hello beautiful video and very clear. I wanted to ask you something if you can help me please .. I replaced everything (oil seal and copper washer) 10 days back. After having cleaned and reamed the base well. As soon as it is reassembled the leak continues but I think it is the pins because I see oil coming out of them. If I reassemble everything, do I also have to replace the copper washer or can I also leave the one that can practically be said to be new? Another question... Can I apply black paste sealant on the pins or do I have to buy new pins? Thanks in advance to those who help me.. 🙏
@davesterl
Жыл бұрын
If you do not replace the crush washer then do not be surprised if it doesn't seal
@antonello7349
Жыл бұрын
@@davesterl So even if I've already changed the copper washer, once it's tightened, do I still have to replace it to tighten it? On the other hand, for the oil leak on the pins, is it solved by applying a silicone sealant on the thread or do you have to replace them? Grazie
@davesterl
Жыл бұрын
@@antonello7349 the copper washer is a crush washer so deforms when tightening it. Replace the stud with new with loctite on it
@antonello7349
Жыл бұрын
@@davesterl ok thanks you were kind to help me thank you could you just show me a link on amazon to buy pins and loctite? maybe good quality pins thanks again..
@davesterl
Жыл бұрын
@@antonello7349 you need to find that yourself. I have already explained simple concepts that i wouldn't normally do
@bryanfitzgerald8046
Жыл бұрын
Great video - many thanks. Just followed this for my 2009 Volvo V50 1.6 diesel. I fitted remanufactured injectors with the original part number. No injector coding was required.
@wackey3455
3 жыл бұрын
Hi does a leaking injector cause smoke to come out from the exhaust. My daughters ford focus 1.6 tdi 2010 failed on emission. Nct guy told her could be a bad injectors
@ronanoneill4480
3 жыл бұрын
Did u find an anser i have the same problem i reckon
@wackey3455
3 жыл бұрын
@@ronanoneill4480 the machanic said bring the car up to him a day or to before retest he said buy diptane fill your tank half way.. he said that you have to put the right amount in. Put to much in he said make it worse. I let you know if he right.. 0 nearly forgot have to drive it 100/120 km a hour so i think what he means drive about 30 km to 40 km one way and then the same back home i going to try that.. i let you know its my daughters car cheers
@wackey3455
3 жыл бұрын
He going to put the diptane in i tell you how much he puts in
@wackey3455
3 жыл бұрын
He puts 4 lines in green mark on the bottle for1/2, tank going to get nct on Monday 18 October 2021 drive in 4 gear about 3500 rev about 20 miles10 out ten back and bring it for a run before nct i let you know. One thing put to much in will cause emissions to fail
@kenh3344
2 жыл бұрын
I know its 11 month ago. Did you get it fixed? 1st what colour the smoke? 2nd was garage looking to do work and charge the world?? Could be the egr valve needs cleaning? Or injectors need service.?
@fightingcockcoglan
11 ай бұрын
Can you tell what size is that bolt tool is please, excellent video.
@PendingNitro
11 ай бұрын
Do you need to recode the injectors if I’m pulling the injector out cleaning and replacing seals to put the same injector back in? I’ll just be removing it cleaning it replacing seals then refitting it
@davesterl
11 ай бұрын
No
@cejs3273
Жыл бұрын
Hey Dave. How about you make a ring shape that fits over your swivel bar. Then have your slide hammer threaded into the ring to help you thump upwards at the same time. Great vid BTW 😀👍
@scouse1967
8 ай бұрын
Brilliant and extremely helpful video. Dave.I've got the exact same engine in my 2008 Focus 1.6 Tdci. It's my number 3 injector that leaking diesel (as you look at the injectors from the front of the car, it's the 3rd one along from the left) I'm not hearing any "Putt Putt" or "Chuff Chuff" sound/noise coming from the injector but i'm really hoping it's just the injector seals or the copper seal/gasket that have failed on mine. Going to have a go at sorting it myself rather than face a BIG garage bill. Please can i ask though if my injector is okay and it's just the seals or copper seal/gasket, dose the injector need re-coding or anything else doing it ?
@annettegifkins-xl8ul
Жыл бұрын
I've got an oil leak on the camshaft housing above the exhaust manifold, is this a common fault on the 1.6 hdi engine and is it expensive to fix? It's not losing a lot of oil but I'm worried because of oil being around the hot exhaust.
@LocalJunkRemoval2189
2 жыл бұрын
What would u say todo ? I have a ford fucus 1.6 Diesel leaking diesel on the top of injectors and engine shaking while in tick over and noise coming from clutch area but when u push the clutch in the noise is gone
@geninedoyle2316
2 жыл бұрын
Thanks for ur help I've had this problem with 1.6 tdci fiesta and garage men made me buy new injector and now still leaking as it's the seals :)
@fiasco1965
2 жыл бұрын
Excellent work 👏👏👏👏👏
@tonyrice3348
2 жыл бұрын
I just bought a 1.6 hdi and the third from the left is barely visible, black death! I need to find someone as handy as yourself up the North coast of NI that does as thorough a job as you, subscribed!!
@CORRIGEEN71
Жыл бұрын
Great video 400 for a newToyota injector
@malekamouri8897
2 жыл бұрын
Hi scotish from .I like good explicación the best from Spain ,that PSA motor thank you
@UsualYaddaYadda
2 жыл бұрын
Thanks, that was great. Don't have the right equipment so I'll head to a mechanic; I only hope that I find one half as diligent as yourself.
@fredscratchet1355
2 жыл бұрын
Terrible engine. This is a common fault on them. The injectors usually seize in with all the baked carbon.
@edgarsmaskals3132
2 жыл бұрын
my injector moving same as yours but still not coming out. even with my injector pulley broken and still not coming
@davidnewman7014
2 жыл бұрын
1.6tdci been best car ever owned but labor required for such a simple job just out for my common sense
@missg3188
2 жыл бұрын
I actually found this quite interesting but i don't have any mechanical experience or tools to do the job.if i did,i think I'd be tempted to give this a go,off the back of your video 👍
@GWAYGWAY1
2 жыл бұрын
Do not forget to clean the turbo banjo bolt filter, the black gunge.It will block it and bugger the turbo bearing
@notwhereyouthink
Жыл бұрын
This is how it should be done. Excellent guide even for experienced wrench monkeys.
@Genuineallmetalbutcher
Жыл бұрын
I won’t be letting wife watch this. One minute of listening to your accent and I risk loosing her ;)
@samisam4535
2 жыл бұрын
Hello from France. Good job,your tutorial is perfect 👍👍👍👍👍👍👍.
@Aar0n5Aml
3 жыл бұрын
Similar job on a 2012 smax? 2.0ltr diesel, or if you want to come down to fermanagh you could do it for me lol
@dajazu
Жыл бұрын
This is how I imagine, if some mechanic will clean my injectors. Job in 120%❤
@TheAurimss
2 жыл бұрын
Im thinking about buying used mondeo 2011 with 1.6 tdci engine, are they reliable?
@Batesandrw
Жыл бұрын
Wiggle wiggle wiggle and EGR plus WD is the answer. Just took mine out for a new seal kit to go in.
@stuartcotterill9475
Жыл бұрын
Hi Dave, i have a stuck injector im trying to get out. What size nut and bolt did you use?
@giorgio14333
4 ай бұрын
Sorry what torx key number ?? 🙏
@hfraat25
2 жыл бұрын
Nice video. I have the same issue. been looking for a bolt. it seems it 1mm pitch x12mm dia.
@martindonald6219
Жыл бұрын
fantastic video thank you very much you explain it very well cheers Martin
@gabrielpefcik570
Жыл бұрын
Good job Dave, well explained and easy to understand video, I enjoyed it and I love your sense of humor too. Thanks for sharing your knowledge, tips and tricks plus video upload. 👍
@robertleeftink19
11 ай бұрын
Thank you for your clear explanation . It worked for me to get the job done! 😃
@richardmarkham8369
4 ай бұрын
Great video. Just done mine. Paint thinners works good on the tar.
@mentals555
2 жыл бұрын
Hi there, I've bought a 2007 Focus with the 1.6tdci. Unfortunately it is leaking at the injectors and creating the black tar like you show in this video. The previous owner told me he had done one of the injector seals already, but only one. All of them have the tar buildup, and it also has diesel fuel pooling around the injectors. What could he have messed up? It isn't leaking fast enough for me to visually see the diesel leaking. And the pools don't seem to appear immediately. I guess a nice side effect of this is the diesel softens the tar substance
Пікірлер: 276