This is the kind of shit that people need to be doing with motors experimenting is what creates innovation
@stevennagley3407
2 ай бұрын
Experimenting is a understatement it’s engineering, just adult Lego blocks
@qoph1988
Ай бұрын
I agree with you that more people need to be doing it, but all this kind of stuff was done every which way more than a hundred years ago. The cutting edge of experimentation isn't usually in the realm of the home garage (but there's always exceptions)
@winstonpratt604
11 күн бұрын
True Story 🤣
@Turbo4Joe363
9 ай бұрын
Making a low revving, bullet proof 'beast of burden' Ford 300 I6 into an aluminum headed turbo monster! I love it!!
@TheMrDarius
Жыл бұрын
I’m not a ford or mopar guy. I’m a Chevy guy but whenever I see videos of people modifying ford blocks to run ls heads or full custom jobs making ls heads work for a six cylinder I absolutely am intrigued and wanna watch and see if it goes successfully and I also hope it does work successfully. I absolutely love these oddball, mixing of different automakers parts. I’m absolutely fascinated by it and will support you all the way through.
@nohtgonahappen7314
10 ай бұрын
Not much to putting a LS head on a SBF or a 300 6 seeing the LS is basically a windsor and a Cleveland head mixed together.
@Pistonranch
10 ай бұрын
It’s more work than you think
@halseyknox
8 ай бұрын
@@Pistonranchthen keep you LS heads on Chevy straight sixes....bow tie hacks
@Pistonranch
8 ай бұрын
@robertsheppard3011 I’ll just keep doing what I want. My project my rules
@xptics
6 ай бұрын
@@Pistonranch i think it’s blasphemy, but it’s fuckin awesome, this is coming from a ford guy though so 🤷♂️
@Motor-City-Mike
Жыл бұрын
Just Golden! I grew up when Wally Booth was 'stacking' AMC head castings to get airflow and Bruce Sizemore was furnace brazing 351 Cleveland head segments together for his 300 Ford - I thought all of that became a lost art, thanks for bringing back REAL engine building skills!
@RChero1010
Жыл бұрын
Check out another skilled KZitemr by the name of Allen Millyard. He's done a number of awesome motorcycle engine builds, like turning two kawi i6's into a v12, or two inline 3s into a 2 stroke i5
@Motor-City-Mike
Жыл бұрын
@@RChero1010 I've seen them - they're impressive enough, - I have machined and built several inline four cylinder snowmobile engines over 1000CCs from two and three cylinder snowmobile engines - but the type of work required to develop both vertically and horizontally sectioned cylinder heads was just "magic" to watch, especially at that time (early '70s)
@daledavies2334
11 ай бұрын
Don't forget about Pete Ardema and his creations.
@firebug8460
11 ай бұрын
Yes this has been done before and gm 4200 stock ecu will work with that your doing .
@B0RN2RACE100
Жыл бұрын
That intake manifold is a work of art
@frontspring1
Жыл бұрын
That's what your mom said
@TrojanLube69
Жыл бұрын
John cena certified
@38unknownhinson
Жыл бұрын
I love how you can still see the efi words on there
@jdmtechllc6589
Жыл бұрын
The whole project is art
@Michael-cb1pr
Жыл бұрын
Don’t forget the Bluetooth charge pipes
@brianwills4398
Жыл бұрын
That 6 cylinder is an absolute beast. I had one in an old van and towed everything with it. Over 500k miles when I got rid of it.
@danielcarroll5667
Жыл бұрын
One of the coolest things I've seen in over 60 years of Hot Rodding ! Happy Birthday Man , glad you have a patient Wife like I do !
@katelyndomeier4682
Жыл бұрын
Thank you! 😊
@midixiewrecked7011
Жыл бұрын
Can you explain what part of this was "so cool" ??
@thinairdiesel3158
Жыл бұрын
@@midixiewrecked7011 the fact it’s a one off piece. No one makes a “conversion” kit to put Chevy LS heads on a 300 Ford. This is what true hot rodding is.
@midixiewrecked7011
Жыл бұрын
@@thinairdiesel3158 but it's not a "chevy LS head" .
@clydecraft5642
Жыл бұрын
@@midixiewrecked7011 do you know what a head is?
@robertwest3093
Жыл бұрын
When that thing fired off I was half expecting you to jump around the room like a kid at Christmas!
@zebdeming
Жыл бұрын
Awesome work! The world needs more inline 6's
@Pistonranch
Жыл бұрын
Yes they do
@ebinmaine
Жыл бұрын
YYYEEESSS
@ajtoofly7315
Жыл бұрын
@Jasen Vernor i know man and the worse part is, it’s all a scam or gonna be
@deckum23
Жыл бұрын
Well, dodge is ditching the v8 so you'll get more incline6's.
@cautloa
Жыл бұрын
@deckum23 no you will get more terbo inline 4s and v6s
@chrishansen7004
Жыл бұрын
I thought the day would never come, absolute genius my hat is off too you
@stewpidaso7145
Жыл бұрын
Shouldn’t you be out catching predators? Lol
@billswanson5708
Жыл бұрын
It's THE Chris Hansen I can't believe it
@_..-.._..-.._
Жыл бұрын
@@stewpidaso7145why don’t you have a seat and tell me what you’re doing here? There’s lemonade and cookies if you’d like them.
@edups1
Жыл бұрын
the little 4 cyl with an ls head and now a 6 with a ls head, in the same year, that's crazy cool man
@barryw5290
Жыл бұрын
I wish Edelbrock would make one of these for the good ol 300.
@dustinmoline3572
2 ай бұрын
The only thing I’m taking away from this is the possibility of a v12 LS
@SlidewaysMotion
16 күн бұрын
V12 LS's are a thing you can buy, just so painfully expensive and bespoke.
@jaysgarage4802
Жыл бұрын
Man, I just have so much respect for your work and craft. It's incredible that you've made all these parts speak together. I mean I'm just doing an LS retrofit in my old Camaro and I find that difficult at times lol. But man great work and keep up the videos The fact that you made all that stuff work is just incredible. Tolerances and all You keep up the good work man
@martinbeckmann9376
Жыл бұрын
Love it. Keep it up. Hopefully this becomes common as 383 stroker kits.
@_..-.._..-.._
Жыл бұрын
I have a project truck sitting for 5 years, stock engine, stock truck and I STILL haven’t finished it 😂 no excuses on my end!
@maxmorrel1820
Жыл бұрын
@@martinbeckmann9376 i have an inline 6 292 waiting for these!
@Pistonranch
Жыл бұрын
The 292 would have probably been a better candidate for this head, bore space is the same as ls
@MrMadkaw400
Жыл бұрын
I’m so impressed with this build and thank you for inspiring a old man that has lost touch with what it is to Hot Rod this build displays the true form of that This is Hot rodding at its finest
@zapa47
Жыл бұрын
Dude. Congrats big time. Normally KZitem series like this just stop waaay before the project completes. This is pretty special in a lot of ways.
@boosted0079
Жыл бұрын
That little jump scare you had at the end was priceless lol. I have been following this build, and I'm very excited that it finally fired. Can't wait to see what it'll do
@obssolutions
Жыл бұрын
Hell yes!!! I've been waiting for this video for a while, as a proud 4.9 owner trying to work out a turbo setup this is so exciting to watch! Great work brother 👍
@richardharrold9736
Жыл бұрын
Literally nothing about this project makes sense, and that's why I've been following avidly ever since I first found out about it! Glad to see it running! Congratulations from south-west England.
@joncountegan5782
Жыл бұрын
Flashbacks!!! 35 years ago when my dad let me start his f250. Pump it three times and roll it over, cold November morning, that straight 6 never failed..
@myleftthumb2294
Жыл бұрын
WOW, runs really quiet. I had never thought of the muffler effect of a turbocharger before. Nice!
@TheAnimal191
Жыл бұрын
Since I saw the one in the Maverick, Ive always wanted to do this. You might have had a much easier time with a MegaSquirt computer or even a Micro to just get it going, but man I'm glad to see more people doing this. This is the American spirit; innovetion, perseverance, success. The greatest nation in the history of the world.
@noahlyden17
Жыл бұрын
This has to be the coolest engine build I’ve seen on KZitem in a long time, awesome job man so cool what ur doing
@kolbyhoare8538
Жыл бұрын
She sounds so smooth, those components seem happy together 👌🏼
@jimmyjimbo61
Жыл бұрын
Love it! Wish that I had your skills. I've been building engines for 40+ years and I wouldn't know where to start with the engineering, design and making the concept come together. You my friend are the man! Kudo's to you! ...and something tells me that you'll have customers wanting one of these builds. Kudo's again! Jim
@barrie411
Жыл бұрын
It's never easy doing something new. Congratulations to you for sticking it out. And riding the roller coaster that's a real treat to hear runnin
@robinwood4433
2 ай бұрын
This is hot rodding. Making things that weren’t meant for each other work. Good job!
@Pistonranch
2 ай бұрын
Thank you for the kind words!
@iangordon2812
Жыл бұрын
You are awesome! I’ve been an in-line lover and racer for years. Edelbrock has a casting factory and all the design hardware needed to make the heads, cam, intake, exhaust, and control system. The 300 cu in Ford engine is so rad even with reworked stock heads. In the sixties, guys were chopping up ford Cleveland heads for drag racing.
@justin-sane713
Жыл бұрын
That’s the one big step every car guy looks forward too it the first time the engine comes to life! Pretty awesome accomplishment! Happy Birthday hope you have a good one!
@andrewwasson6153
Жыл бұрын
Happy Birthday! What a great engine. I’ve been waiting to see it run and it was well worth the wait. That sounds just perfect once you got it fired up.
@dvldrvr420
Жыл бұрын
How is this monstrosity not sitting in a booth at sema? I've seen some interesting things before, but this is mind boggling. Keep it up please.
@Hitman-ds1ei
Жыл бұрын
One of the sweetest and interesting builds to be seen I believe !
@dothethings
Жыл бұрын
Back fire scared me too 🤣 awesome work man . I have a huge appreciation for what it takes to mix n match and sort this stuff out . Keep up the good work
@stevenlaws8239
27 күн бұрын
The pop at the end 😂 Congratulations with your success on a very unique build brother
@thatautogarage3644
Жыл бұрын
Congrats man! It's so cool watching this odd idea turn into progress and then turn into reality, sounds amazing too. I've been checking the channel frequently to make sure I didn't accidently miss a notification.
@scrotiemcboogerballs1981
Жыл бұрын
Sounds like you are almost there can’t wait to see it done thanks for sharing happy birthday
@matthewsmotorsports
Жыл бұрын
I’m so stoked to see this thing finally running! Much respect!
@nextgen1939
Жыл бұрын
You have just made it to the next level! Congratulations on the journey.
@kskip4242
Жыл бұрын
This thing sounds so damn good exactly what I thought it would sound like really close to an INLINE 8! 🎊 congrats it's ALIVE!
@Mike-xt2ot
Жыл бұрын
I hope this gets millions of views. . Your dedication and talent is amazing to me. I'm a builder/ fabricator myself. I know the incredible amount of thoughts and labor to result in this accomplishment.
@Pistonranch
Жыл бұрын
Thank you!
@mypony7310
Жыл бұрын
Man, if you sold this as a kit.... Very cool!
@tthams73
Жыл бұрын
I’m blown away!! That’s fricken awesome! You took a rock solid foundation and totally unleashed a beast! Brilliant!!!
@rickyracer-aidanhenson1216
Ай бұрын
This is definitely the most unique engine build I’ve seen. Awesome work
@fugemlpriks1876
Жыл бұрын
Awesome stuff mate. Not a easy task to do what you have done. Looking forward to seeing it screaming and flying to bits.👌👍🇦🇺
@everydayirace
Жыл бұрын
man, this is gold, i like the raw video, no music, perfect
@ATomRileyA
Жыл бұрын
Wow that is a amazing piece of engineering, always loved the straight sixes for the noise alone :)
@christopherfowler1549
Жыл бұрын
That backfire was awesome, lol. You were like, nope leavin it alone.
@MFU.team.4367
Жыл бұрын
I have been so excited during this series! I cant wait to see more, it sounds fantastic!!
@cbredneck1252
Жыл бұрын
So excited man I've been watching forever waiting for this. Extremely good job.
@111000100101001
11 ай бұрын
True Hotrodding a one of a kind for yourself and the world to enjoy!
@jamesbennett5189
10 сағат бұрын
Ford 300 6 is one of the alltime best motors ever built. Now its even better.
@JeanPernicia
Жыл бұрын
There are cool things and that engine. Many people think that it is this is a very difficult project, but very few dare to do so. Congratulations!
@rosskrause3926
Жыл бұрын
You did a great job on that cylinder head and intake manifold..its really sounds good as well.
@yodasbff3395
Жыл бұрын
For a little bit that thing was purring like a kitten. 👍
@Str8sixfan
Жыл бұрын
Sounds great! So glad to see someone else out there embracing the desire to be different!
@outfitsgarage88
Жыл бұрын
Keep-a-hammerin man your almost there. It fired up and ran. That's a major accomplishment 👏
@calebwilkins7193
Жыл бұрын
Congrats dude. Always good to hear the fruits of yout effort for the first time. 👌
@katelyndomeier4682
Жыл бұрын
Way to go!!! Proud of your hard work!
@austin2791
Жыл бұрын
That’s killer! That thing sounds amazing
@Enigma-Sapiens
Жыл бұрын
It sounds great, it's good to see you making progress too!
@louiewiessv5756
Жыл бұрын
Happy bday ! Thank you for your hard work!
@chrismeyer8288
Жыл бұрын
Smoothest in-line motor I’ve heard in a long time, it’ll get rowdy in whatever you put it in 🤙
@masjuggalo
Жыл бұрын
I6 tend to run smooth just because of there design
@mikeweber5382
Жыл бұрын
Very cool! Good luck getting it all sorted out, can’t wait to see it singing that sweet six sound once you do! Keep us posted.
@eddieo7660
Жыл бұрын
This absolutely blew me away man !hats off to ya! I couldn't even dream of coming close to building something like that, just wow man, wow!🤯
So glad someone who has done this actually put up a video of it, sounds very interesting
@notaboutit3565
Жыл бұрын
Man this is cool as hell. Had this same idea years ago and ended up just building out a 2.2 ecotec for size and weight reasons, but I’d love to have a turbocharged 300 still. What a badass motor.
@justinanderson9126
Жыл бұрын
Glad to know someone actually tried to start the engine I heard bout like 8 years ago an even a 460. Big block head. Hopefully someone tries that one
@squarefour1
2 ай бұрын
The 460 head was put on a 4 cyl. Mercrusier tried to make them run. Big Disaster
@MikeOrkid
Жыл бұрын
Yessss! Stoked the concept is proven. Can wait to see it mounted and running
@picklefart
Жыл бұрын
this is the COOLEST engine on KZitem right now. You have some serious talent.
@evancox107
Жыл бұрын
Congratulations, I’ve been watching your build for a while and it’s really impressive what you’ve done
@anthonysgarage
Жыл бұрын
Awesome!!! Sounds really nice.👌🏻 Surprisingly quiet. I'm sure it's probably the turbo helping out with that. Good for you Man!
@ColbraBull
Жыл бұрын
This is awesome. Seeing all that wiring makes my brain hurt though, definitely took more patience than I have.
@bobteachesphoto6379
Жыл бұрын
Absolutely love it!!! Much respect keep going, the gear heads I hang out with all think this is one of the coolest engine builds ever!!!
@Arivera41682
5 ай бұрын
Its awesome and sounds well tuned. The run part of the video you showed, it sounded super smooth and cool.
@NightWrencher
Жыл бұрын
Ive been waiting for this video! This is awesome!
@jodydewey3516
Жыл бұрын
THAT IS SUPER COOL! I think its really neat that you made an LS head for the 300. I think that is the best inline 6 ford ever made
@skaldlouiscyphre2453
Жыл бұрын
Ford Barra has entered chat.
@halseyknox
8 ай бұрын
The best inline six period....typical Chevy hacks
@Landon-roling
4 ай бұрын
@@skaldlouiscyphre2453literally what I thought when I clicked on the video 😂
@Mereshot101
Жыл бұрын
This is one of the most bad ass projects on KZitem I love it
@jasonkruitbosch1224
Жыл бұрын
Hell yeah! Obviously, a ways to go still, bet hell, she'll run! Well done, sir. I've been watching for a while with anticipation as I'm building a 4.9 myself. Happy Birthday, congrats and big props!
@magicman_metal_fab
Жыл бұрын
Yesterday was mine. Excited to see this!!!! 😊🤙🏻 happy birthday bud
@markandersonvancerrail
Жыл бұрын
Sounds amazing Jaron!!!!!
@danpatterson6937
Жыл бұрын
Starts right up. Great project; keep us updated!
@marklowe330
Жыл бұрын
Love this project. The hard part is behind you. You got this.
@cromBumny
Жыл бұрын
I'd love to see someone do this to the 4.0 Jeep engine
@maxfastest
Жыл бұрын
Awesome ! Been watching for this .
@tylerwightman2315
Жыл бұрын
Truly amazing! Looks like your on the right path. You've come this far already, just a matter of time before you have all the bugs worked out and the thing is running like a clock
@LarryDon-kx1ez
5 күн бұрын
I had a 1966 F100, from 1970 until 1978, I did everything with that Truck, it had the 6 cylinder, three speed, when I saw that flame belch out of that in-line it brought back memories, I ran a straight pipe, no muffler, it sounded like a V8 with headers…..I’ve been driving Ford Trucks since, Old Fords never Die, they just look better…..
@loki244ti
Жыл бұрын
Great job! I recommend megasquirt as a fuel and spark management system. That will give you full control and won't break the bank.
@theone2028
Жыл бұрын
Absolutely mint 👌, can't wait to see the next update!
@timrobertson299
Жыл бұрын
Congratulations on the running of the engine, You had to sort of feel like Dr. Frankenstein when it popped and ran 😆 I like that throaty sound!
@theguy9234
Жыл бұрын
This should make some great torque and hp
@caseygentry698
Жыл бұрын
That thing sounds great.
@bobwhite4344
Жыл бұрын
Happy Birthday. congrats on engine running.
@David-yy7lb
Жыл бұрын
That's awesome two different great manufacturers coming together.
@shannonsisk
Жыл бұрын
I thought the 351 with LS heads was cool. This is even cooler
@bennyb.1742
Жыл бұрын
This is so exciting! I really want to do this on my '65 Econoline. Heaps of people just drop 302s into them, but I'm not into V8 swapping. I'm kind of thinking about doing a Barra, but they're HUGE and I'm not sure it would fit between the seats.
@jacobgriffin2500
Жыл бұрын
Atlas 4200 swap? My coworker has a 302 swapped exonoline pickup there definetly narrow!
@masjuggalo
Жыл бұрын
Is the barra wider then a 302/351? I think the v8 has a weight advantage but the Ford 300is fairly light for a us i6
@onedayiwillmakesomecontent
Жыл бұрын
Barra is really high from the DOHC setup. Look up skid factory barra powered Bedford. It can be done! Way more power and torque than a 302! I had/have both🇦🇺
@sav300
Жыл бұрын
Freaking awesome!!! Looking forward to more running videos and maybe a little spooling of that turbo!
@jamesmikesell5458
Жыл бұрын
Sounds great can't wait to see it in your vehicle and running great job sir
@jameseastwood4984
Жыл бұрын
I'm subscribed, anyone who can home build a cylinder head needs to be watched.
Пікірлер: 1,1 М.