They're all "definitely" 390's when you're a seller, and all assumed to be 360's until proven otherwise when you're a buyer. FACTS. lol
@richardbates2367
11 ай бұрын
In my experience every single one that someone told me was a 390,was in fact just the normal 360fe oh well decent dependable and durable motors
@lordmarshall5239
6 жыл бұрын
My father had the 76 with a 360 as a plow truck. He gave it to me in 89 when I got my license. So simple, tough and cool. Such character, such a feel on the bench seat holding the steering wheel and stick shift. Good luck. So many memories
@T0YCHEST
5 жыл бұрын
Does a 67 gt have a 390 or do people fake it with a 360? Idk I'm curious I was searching what is the best transmission I can swap to it, and this video showed up.
@chuckwhitson654
4 жыл бұрын
My papaw left me a 76f250 4wd 360 with headers, glass packs r.v./ towing can ( former local pulling truck) and 3.90(or Ford equivalent) with 38" monster mudders. Yep it was a papaw truck and he was damn cool... My mamaw made me sell it to buy a more" efficient" car. Only damn vehicle outta Camaros darts dusters and 30 different trucks that I regret selling. It sounded like the baddest thing on the road. He taught me from 3 or 4 yr old that the right pedal is the " loud pedal" I can still hear the poppety crack sound it made coming down the mountain. Best memories
@chuckwhitson654
4 жыл бұрын
Cam damnit, rv cam
@chuckwhitson654
4 жыл бұрын
Yeah it was slow Even then but it would drag anything hooked up to the back
@phillipmackenzie8087
3 жыл бұрын
@@chuckwhitson654 RIGHT ON
@2ndamendment495
6 жыл бұрын
You can also put number 1 piston to top dead center and pull the number 4 plug out to measure the stroke.
@ThunderHead289
6 жыл бұрын
That makes sense - Iv always just done this on whatever engine to measure the stroke. That would be 2 minutes vs 5 !!!
@Loan--Wolf
6 жыл бұрын
i never thought about that lol good idea
@xmo552
5 жыл бұрын
Now that's a great idea. It's so simple and genius. Thanks.
@bartjacobs3394
5 жыл бұрын
That's the same way I checked my engine stroke it turned out to be a 390 guy I got it from said it was 360.🙂
@piratecat4519
5 жыл бұрын
Sounds easy til you go back there to pull that #4 plug.on my 67 fairlane that was no easy task.
@tomswinburn1778
6 жыл бұрын
I worked for a company in the 70s that bought all their trucks from the Tennessee Valley Authority. F-250s with auto and the 360 CID engines. We had our own shop mechanic and he was pretty much an expert on the 360 engine. When we got one he immediately pulled the heads and took them to a machine shop for the machine work then reassembled the heads and reinstalled them. Those old trucks ran great, and forever, but the fuel consumption was a killer. Still cheaper than buying new, and they did everything asked of them with ease. We put utility bodies on them, and bed winches, so with the tools, and equipment we carried they had a HARD life. A lot of weight, even when not carrying equipment. Those trucks are what sold me on Fords for work trucks. Nothing else came close. And I STILL like carburetors and hate electronic fuel injection, sensors and computers for trucks. Flat out GUARANTEE our trucks spent less time in the shop than ANY modern vehicle. And down time costs money in the service business.
@abolishguncontrollaws5689
5 жыл бұрын
except a modern truck compared to an old dentside (73-79) 73-76 for FE engines, will be outperformed by a modern truck and last longer.
@joshdenham8404
5 жыл бұрын
My family owns a landscape company, and we are all Ford for the fleet trucks. In the last 20 years or so, we've had every generation the f150-f350. As far as the newer trucks, (by new I mean 80's to early 2000 lol) they gave us constant problems. Always something engine related and constantly breaking down. The Tritons were the worst. With everything going okay until it shot a spark plug out the head at the worst possible time. Our longest lived vehicles, that took the least maintenance and repairs were the 70's trucks with the FE blocks. I still have two that are driven almost daily. No substitute. I guess the only exception is the 99 with the 7.3 power stroke. It's performed great. But diesel is a different animal all together
@ty2010
5 жыл бұрын
Guessing they got the 4bbl, I had a 73 with the 2bbl and it got fantastic mileage, at least compared to the GMC 400 I had at the time.
@feelingsogood6073
4 жыл бұрын
Sensors and fuel injectors should be a option for performance minded people with big wallets for engine work . I prefer carbs .
@danieljonhson6367
4 жыл бұрын
I found that the 360 and 390 engine both run longer if you over load the truck once in a while .
@JunkyardDigs
6 жыл бұрын
That is the official shirt of working on FE engines, never the less in an old blue f250
@Pedrofitbulls
3 жыл бұрын
I got a red on
@richardc7721
6 жыл бұрын
I was a Ford tech back when the FE ruled the power line-up at Ford. The 360 truck engine was a sturdy engine, that with a cam swap, 4 bbl manifold & carb, with dual exhaust would definitely haul the mail. People often got into trouble by swapping out the cam without changing the exhaust valve set-up, they had exhaust valve rotators which would bind much above .400 lift. I replaced scores of bent push rods because of that and overreving the engine. Stock lifters would pump up leading to coil bind and bent push rods. If a customer didn't want to invest in a set of springs and keepers with the new cam/ lifter set then I would use a C6,OZB cam from Ford. It was used in 390 GT 4bbl apps. It would really wake up a 360 without the need for valve spring change out because the lift was below.400.
@casey360360
5 жыл бұрын
The stock cam overlap is insaine. I just picked up a 73 360 and am putting long tubes on her tonight and tomorrow. I wanna find that load of torque the FE lost going from my 72 to 73
@jonhisey6412
5 жыл бұрын
Wish I would of known that info 20 yrs ago... I used to bend push rods on my 390 weekly... it had a good size cam in it... could never figure out why it would bend them all the time... good to know...
@NoMissOutdoors
6 жыл бұрын
And everyone in California is screwed now with the straw test.... guess they will have to use a dowel.... lol
@100texan2
5 жыл бұрын
That’s what happens when you let liberals run government.
@dangerousfreedom4965
4 жыл бұрын
Mech Anon but your drinks all taste like cardboard
@kd5ozy
4 жыл бұрын
welcome to Wakofornia
@jesse75
8 ай бұрын
I've had both engines in several Ford trucks. Because they are low compression, I couldn't tell the difference between a 352, 360 or 390. But one thing. All of them are good solid performing truck engines. If you live in cold climate area, they do take along time to warm up. Get a block heater.
@smokeskull
5 жыл бұрын
I found a 428SCJ in an old lifted F250 one time. I bought it from the guy because it had capscrew connecting rods. I assumed it was a HD truck engine or something. I tore it down and the pistons said 428 SUPER on the sides. The heads were 4 bolts hole CJ heads and the block measured correct dimensisons bore and stroke for 428. It was a very good day. Paid $300.00 for the motor. I put it into a 1957 Ranchero with a big spline top loader and 9 inch N locker. I towed my friends VW Bug powered Hemi to the drag races and never had to shift from 4th thru the entire journey over the mountains.
@drd1924
3 жыл бұрын
MPG ?
@Axeman428
Жыл бұрын
MPG wasn’t much thought about since gas was 28 cents a gallon or less when the FE engine was first built but I have been able to get about 18 mpg with a 68 390 GT fairlane and four forward with 3.25 rear but with a 2.70 rear in my 428CJ falcon I got about 20 as long as the right foot wasn’t too heavy.
@robbyjones7631
6 жыл бұрын
Set the choke closed cold. Set the fast idle warm. Set the idle and timing warm. Replace the choke thermostat. Replace the distributor cap and rotor. Get the distributor on #1 TDC on the compression stroke on 0. Turn the engine in normal direction. Lift the distributor and point the rotor at #1 terminal. Turn the distributor way back opposite normal rotation. Lower the distributor and turn the distributor to normal. Put everything back and set the timing. If the distributor won't go down, use a oil pump primer shaft or old distributor with the gear removed to align the oil pump shaft to distributor. This compensates for timing chain wear. Test the choke pull off, vacuum advance, EGR for leakdown, heat control valve vacuum control, transmission vacuum modulator for leakdown, heater/ a/ c vacuum motors, charcoal canister purge container for leakdown, and other vacuum parts. Set the transmission kickdown at full throttle to spec. Adjust the bands using the factory tool and sockets.
@ericouellette5293
3 жыл бұрын
Dad had a 75 f100 4x4 with the 360 in it. He had the truck for 20 years plowing snow and hauling firewood. In the early 80s he needed a valve job done. The guy who did the work for dad had a set of 390 heads and a 4 barrel intake and carb he put on it. After 20 years of plowing snow and hauling firewood it went to the junkyard with 213,000 miles on it. It still ran and drove even with a busted t-case. A buddy of mine knows who bought the engine and ran it for years after that.
@mromatic17
2 жыл бұрын
they junked it over a bad t case? if so thats shitty its a pretty easy fix. you could get it fixed for less than 1000 today!
@kellykonoske91
6 жыл бұрын
You mean it doesn't have leaking exhaust manifold? Amazing
@sleebbie
4 жыл бұрын
That's call the 1:10,000 ratio
@kevinwright754
5 жыл бұрын
I have a 69 F100 it has a 390 in it.It came with the 360 in it originally.But Mom was driving a galaxy that had the 390 in it.When she got a New Monty Carlo I got the Galaxy.Dumb kid hot rodding the car and wrecked it.So dad made me replace the 360 in the truck with the 390 out of the Galaxy.Its still in it and recently rebuilt to Ford factory specifications.After me it goes to my oldest son.I grew up in it and learned to drive in it.The clutch is a beast gotta have a strong leg.Its not perfect.But I love it.
@WilliamMunny-d8s
Ай бұрын
you can do a QUICKER easier test by measuring the point on the straw in #1 cylinder like you did BUT also measuring same thing on #4 piston which will be at the bottom of stroke at same time. so the difference will be stroke length
@magicdaveable
6 жыл бұрын
Lots of 390's had 2 barrel carbs. Mercury station wagons had 390 fe engines. I rebuilt lots of them back in the early 80's. I always searched the boneyards for 4 barrel intake manifolds. They weren't easy to find and the 4 barrel got much better gas mileage plus made much quicker hot rods. My F-150 4x4 390(4 barrel) 4 speed (granny low) could pull down trees.
@VeryOddTimes
6 жыл бұрын
David Bennett May I ask what year? I have a 76, basically the same set up. I was told in a forum once that the 4x4 390 set ups were not available for the F-150 and were only available for the f250. I already had a couple of mechanics check it out and confirm it is a 390. So either the trucks did come up with this setup or it probably had an engine swap at one point. I’ve looked around all over forums and what not but get conflicting results.
@magicdaveable
5 жыл бұрын
@@VeryOddTimes I built mine from "bones." It was originally a 360 that had a hole through the block. I had a very low mileage 390 from a Merc station wagon that had been crunched in an accident. Most of my pickup trucks came from the boneyard. It helps knowing the boneyard owner really well. I wrenched on his Pan Head regularly so he always called when he had Ford "stuff" I was interested in finding. I got a Boss 302 for $200 from him. 😎
@VeryOddTimes
5 жыл бұрын
David Bennett Goddamn. That’s badass man, congrats! Idk I love my FE but I want to make the truck into something with a whole lot of grunt. Where I live everyone (and I mean everyone), has cammed up chevy’s and think they have the fastest shit out here. Some guys have serious trucks though, but I want something that’ll blow the doors off most of them. It’d be neat to find an old 406, 410, 427, or 428. I found some builders that sell some pretty hard-hitting turn-key FE’s but for the same money, I can get a built 460. Or I can just try and do what I can with my 390, it already has a little cam and some decent grunt, but I want more.
@christinamoneyhan5688
5 жыл бұрын
My father bought a 69 F250 with a 390 Granny low 4 speed 4x4 it too was a beast. Loved gasoline. Might have got 6 mpg. on a good day.Good thing gasoline only cost 32 cents a gallon back when gasoline was good fuel.
@BareRoseGarage
Жыл бұрын
Like you said, I don't know if they are "Stock" but I have come across a few 4bbl 360's on the "T" intake manifolds. Lot of people say all you have to do is look at the tag on the coil bracket, but I've found two of those 360's that they swapped the tag on to make them "look the part". Good stuff man!
@jesse75
Жыл бұрын
Most of the tags are long gone. When I had my shop in the 80's and 90's, I used to collect them. I had a couple of hundred of them. Wonder if they are worth anything.
@jmangi6221
6 жыл бұрын
Good tip. I have a 75 HiBoy 4X4 and the guy I bought it from said it's a 390, so it can't be the original engine, since they only put 360s in the 4wd trucks.I'm gonna do this test just to confirm, thanks for the great trick.😁
@jimrhoads9810
6 жыл бұрын
they put lots of 360's in 2 wd trucks.............
@mromatic17
2 жыл бұрын
@@jimrhoads9810 yeah but they only put them in the 4x4’s is what hes saying!
@s.curtis2914
6 жыл бұрын
Good video, unless I’m mistaken, the easiest way to telll if it’s a 360 or 390. Look at the water pump. 360’s are smaller than 390’s.. I’ve got a 66 galaxy with a 390, 69’ f100, w/ 390, 71 f250,&75 f350 both have 360’s Between these years the water pumps are the easiest way to determine 360 or 390..
@boogieshmurda36
4 жыл бұрын
S. Curtis it is. When working on my truck, I just assumed it was a 390. Bought a water pump for a 390 and I didn’t fit. Went back to auto zone and got a pump for a 360 and it fit perfectly
@drd1924
3 жыл бұрын
@@boogieshmurda36 I thought the only dif between the 2 was stroke and pistons? Why would not a 390 pump fit on a 360?
@danielc5205
6 жыл бұрын
All 360s were 2V engines. If you know the engine is original to the truck and hasn't been converted, the fourth letter in the V.I.N is what the factory motor is/was. Also, as you should know, the 390s were only used in 4x2 trucks and passanger cars. And, a interesting fact is, the FE 360 uses the same crank and rods as the FE 352. The only difference between the 352 and the 360, is that the 360 has .05" bigger bore than the 352.
@opeelmr4800
6 жыл бұрын
Most 390's have a hanging down oil filter adapter and the 360 comes straight out dead give away if you see it. Just had Lordco Machine Shop out of Mission BC build me a sweet 390 357 hp 419 lbs of torque engine. Edelbrock heads and matching intake. I bought a Steve Christ FE book a long time ago with all kinds of good info on these engines. Sez 390 right on the fender of my 69 XL convertable! You want the 390 crank which has a notch at the flywheel end 360 has no notch. If you have a good block keep it safe as I lost 1 to rust over time. Cheers
@justinw.2376
5 жыл бұрын
Pretty hard to tell if engine is the original sometimes because most cases the engine was replaced years ago
@cammontreuil7509
2 жыл бұрын
352 used a longer rod.
@lisawanderess
3 жыл бұрын
I’ve got one of these! Mine’s an all original 1971 F100 Ranger XLT with the 390 and I love it!!! 😍
@mark_osborne
6 жыл бұрын
I am going to sit down with a fresh cup of coffee and enjoy every minute because I have NO idea how to tell the difference - externally :-) I was surprised to learn a 4 barrel is standard equipment in 1976 for a 390 !
@robertdavis6708
5 жыл бұрын
Glad you saved the truck. My dad had one just like that.
@tonypickrell4281
6 жыл бұрын
I had a '72 F-250 Ranger that had a 390 4spd , that truck had alot of power , I got 9 miles to the gal. loaded or empty...! Wish I still had that thing...! Had the 16.5 tires on it , was one hell of a work truck...! Had the factory air , power steering , power disk brakes...! Problem with it was the cab mounts and the inner fender wels was rusted out , I came across a 1970 f-250 for $100.°° from a farmer and switched everything from the 72 to the 70...! Took the whole front axels and put on the '70 as it had drum brakes and no power steering on it...! It turned out to be a better ride...!!!
@erich6150
5 жыл бұрын
I just picked up a 68' F-250 390 4spd, Still working on getting it running but i'm glad to hear your truck was a work horse. I'm only 19 so i know very little about trucks.
@78mrdad
4 жыл бұрын
After you get your top dead center measurement If you have a way to hook air up to the cylinder and pressurize it it will force the piston all the way to the bottom
@jamesbascombe8274
6 жыл бұрын
Hay man good to see your back. You have been Mia for a bit. Just got a 73 f-100 for free. That gives me two old trucks now.
@garysimonson9593
3 жыл бұрын
The 352 is also a 3.5" stroke and they also used the same block casting. The 360 has the 4.05 bore of a 390, the 352 has a 4.00" bore. 390 stroke was 3.780, so your straw test looks right. There were a *lot* of 352s produced, measuring a 3.5" stroke doesn't guarantee a 360 - last year of the 352 was '67.
@p51dman
5 жыл бұрын
The easiest way to tell, pull the dust cover, ( most often missing), look at the very end of the crankshaft where the flywheel attaches. Slowly rotate the engine, and look with a flashlight, a 360 will have a "half moon" cast into the end, where a 390 will not and will only have a "keyway" cast into the end. If it is needed, there are only 4 bolts that hold the dust cover on. A 390 crank will have a 2U stamped into it where a 360 will have a 2T.
@fredthegraycatt
2 жыл бұрын
Not accurate. I have a 390 with a 3.78 stroke, part C4AE-B, and it has a half moon cut in the rear crank flange.
@TBullCajunbreadmaker
4 жыл бұрын
Talk about a good deal. You have way more value in the drivetrain in that truck than $1,000. The engine alone is well worth at least $1,500. I have had a few vehicles with the 390 and the 406 as well as the 352 and 351. I've had 289s and 302s as well and the 390 is by far the best big block of all of Ford's big block engines. They are easy to put a lot of extra power into them and that engine can really throw it's weight around.
@dalet1808
5 жыл бұрын
It's a 360 when u bye it and 390 when u sell it. How ever when I bought mine the old man told me it was a 360 i found out when I pulled heads off she was a 390 so yeah needless to say I was very happy😁
@coolbreeze5561
2 жыл бұрын
I had a 360 in a 68 F250 loved it. That's a nice truck you have there
@brianchisnell1548
6 ай бұрын
Ahh. I miss my '68 F-250.. 360 2 bbl. Manual choke. Camper Special.
@Tadjuel11-11
5 жыл бұрын
I thought marking the straw with the 360 and 390 measurements was easy but checking cylinder 4 when cylinder 1 is at TDC is the bomb way to do it.
@ThunderHead289
5 жыл бұрын
Due to dwell, you can know true tdc without a piston stop - I agree with you, but that’s easy to mess up 👍
@jhmonthetube6339
2 ай бұрын
One easy visual way to tell…the 360 has a smaller water pump than the 390, at least for the 71 and 72 F250 pickups.
@curtisvonepp4335
3 жыл бұрын
Ford did put a metal tag on one of the intake manifold bolts rear passenger side look for it .
@johnparrish9215
5 жыл бұрын
The 360's get a bum rap. They are all forged cranks that are fully counterweighted. If you ever wanted to build a wicked boosted FE engine, the 360 might be a good way to go.
@fk4515
3 жыл бұрын
that's the difference between an FE and a FT engine
@garysimonson9593
3 жыл бұрын
The 360 was built with low compression and a cam profile made for pulling things, being a truck engine and all. A 360 can warm right up with more compression and cam.
@sirtango1
5 жыл бұрын
Good looking truck. She will probably pass about everything on the road except a gas station. They like to drink! :)
@christophersnyder3241
5 жыл бұрын
390 got a 3.783 inch stroke. same as 427.
@neil6212
5 жыл бұрын
Back when I was in my 20s, I bought a new Mustang convertible which had a 390 4V, 4 speed and "dapco" rear end in 3.25:1 Looked like a regular Ford 9", which at the time was as plentiful as one could want. After a year or so, I decided to warm it up a bit, and installed a 427 cam, along with the solid lifters and appropriate push rods and adjustable rockers. When I was finishing up the install, I found that new valve covers were needed, too! Fortunately, the local dealer had a pair on the shelf! So, the 390 was rated at 335 HP and had a 10.5:1 compression ratio as I recall. Any guess as to the difference in horsepower? It surely felt faster, and the killer idle was awesome! BTW...I'm now in my mid seventies, and still am again buying new Fords, since 1986 after a hiatus of several years. Marriage does that to you sometimes!
@ThunderHead289
5 жыл бұрын
I bet it was 390 horsepower at least with a good 4 barrel set up!
@mromatic17
2 жыл бұрын
ive heard that the old 390’s especially in the old 60’s thunderbirds were about 400ish and they were rated at about 390 if i remember right.
@steveh7108
3 жыл бұрын
As I understand it, the rule of thumb is: if it's four wheel drive it's more likely to be a 360. I guess trucks that required more torque got the 360. Can't claim I know for sure but I believe I remember doing some research a couple years back and that was the difference between the 390 and 360 applications from the factory.
@TheRoadhammer379
2 жыл бұрын
Ford absolutely never used 390 in the 4x4. None of the Ford literature ever shows 390, though a dealer could install a 390 as a dealer option
@user-ee4pc3fu1d
6 ай бұрын
Find top dead center on one take the spark plugs out of one and four one will be at top dead center and four will be at the bottom of the stroke
@whitestratman3158
6 жыл бұрын
OR you could take the valve cover off and look up the numbers on the head on the internet to get the engine size, year, and specifics.
@ThunderHead289
6 жыл бұрын
Didn’t work for the 360/390. Literally the same engine except for crank rods and pistons
@devondewes5239
6 жыл бұрын
thanks man i am looking at an old ford right now and i was having trouble , Thank you.
@devondewes5239
6 жыл бұрын
Thank you, good to know i'll keep that in mind.
@microgamer54
3 жыл бұрын
Also if number one cylinder is tdc number four will be all the way down u can stick the straw in both of them and measure the difference
@red58fury
2 жыл бұрын
I honestly need to do this. I bought it in 2012 and owner said it’s a 360. Vin says truck was 360 from factory but you can tell someone has been into the engine before. So maybe it was rebuilt to a 390 who knows.
@BoundANDDetermined88
2 жыл бұрын
Gotta love low tech solutions for difficult questions.
@desertmonsoon1
3 жыл бұрын
A dial gauge will tell you exactly how much the piston has moved. No stupid straw inaccurate markings, etc.
@ThunderHead289
3 жыл бұрын
You don’t have to be exact - a 360 to 390 is enough difference to visually see if making arbitrary markings. Also, anyone has a straw.
@jamesford2942
2 жыл бұрын
360, the lack of power of a 352 and the bad gas mileage of a 390 combined to be a lackluster engine. Last good Ford truck came off the line in 1979. Love my old Ford trucks.
@harrypotter4309
3 жыл бұрын
Wow, I'll take one for that money. (it would cost about 7 times more here in U.K., if you were lucky) they are here, but they're dear !!. Love FE's I've got two.
@gadsdenviper7149
6 жыл бұрын
When I do this I run number 1 up till my wooden dowel wont go any higher and mark it at the top of the spark plug hole then run down to BDC and mark it again at the spark plug hole and measure. Very similar to what you did.
@gsallison1
6 жыл бұрын
My old F250 came std with a 360 and was way worn out. picked up a 390 out of a Galaxy 500 and then it ran like a at out of hadees, super strong running work truck.
@salvadordollyparton666
6 жыл бұрын
Jerry A I had a 76 f100 4x4 that came with a 360 and got a 390 from some 72 car. It was a factory 4 barrel and damn was it a beast. It'd cruise at 80 no problem all day getting better mileage than my 00 5.4, with a granny 4 speed and no oberdrive. Get there in a hurry too.
@jimrhoads9810
6 жыл бұрын
when i was lookin for a work truck years ago i would buy a truck with a worn out 360 there were a lot of them. put a 390 in and be ready to go...........
@salvadordollyparton666
6 жыл бұрын
Yep, I'm ready for another F.E. powered truck. I always wanted to build the 332 or whichever is in my grandpa's old '67 600 wrecker. But I'm kinda thinking dt466 or some other medium diesel. Be nice to have another short bed 4wd.
@gsallison1
6 жыл бұрын
hey Nick, I used my F250 (w/390 @ about 300HP) to haul firewood, One time it hauled HICKORY which is one of the heaviest woods, the load was piled level with the top of the cab. even put some where the passenger sits, My buddy had to ride on top of the load, but didn't have just a couple of miles to get home. Now I drive a Tesla model 3 and its a wild beast in sheep's clothing for sure. Take care budd.
@mandelaeffect3521
5 жыл бұрын
I'm a proud owner of 390 fe
@fordnut4914
4 жыл бұрын
I'm proud owner of 460 gasaholic 😆
@petedongara1935
6 жыл бұрын
I heard the late 70s on the Fe engines Ford put a lot more Nickel in the cast-iron and those engines will last a lot longer than the previous Fe engines
@johnhutchinson7306
5 жыл бұрын
Never used nickel.
@williamallen7836
4 жыл бұрын
Mid 1970's is when they started reducing nickle in the blocks. The fe's kept until the late 1970's
@MitzvosGolem1
6 жыл бұрын
Ford made 331, 361 and 391 HD truck motors also. 377 and and 429 HD came later. Issues with exhaust manifold burned valves rear main leaks and starters on Fords these years.A also a huge 534v8 which is a collectable today.
@jimrhoads9810
6 жыл бұрын
i had a 538 in a dump truck, gas guzzling damn thing..............
@tonywright7319
5 жыл бұрын
429 was a different block. 331 through 427-428 were FE blocks and 429-460 were lima blocks.
@sspeedy2859
2 жыл бұрын
I have a 390 that came with a 4 barrel, it's out of a 1962 T bird.Going into my 1969 XL.
@jamesrodriquez2863
6 жыл бұрын
Part it out?!?! Um, Hell to the double naw!! It's a damn good running truck with lots of life in it. Glad you changed your mind. Save the parting out for the ones that aren't worth rescuing.
@normadams6296
3 жыл бұрын
Just a scoch,that's classic ,that's a standard in are old shop back in the days of racing
@redram5150
5 жыл бұрын
It’s not an easy thing to notice, but the angle of the mating surfaces between FT and FE engines are not the same. Learned that the hard way when a friend tried bolting an aftermarket manifold he pulled from a 360 and tried mounting it to his 390. Same issue on a 352 as well.
@gregsilveira6808
5 жыл бұрын
The 352, 360 and the 390 are all FE engines. The FT engines are 361, 391, etc. 352, 360, 390, 406, 410, and 428 heads and manifolds are fully interchangeable.
@codyandrews6611
4 жыл бұрын
Just bought a 1976 F350 Super Camper Special with the 390 FE 151K miles
@jasonmushersee
6 жыл бұрын
bent push rod issue, vibration damper goes bad alot, low oil pressure, rocker tick noise, hard starting on cold mornings and at high miles these spin rod bearings. when doing heavy pulling like hay wagons, gravity/chopper boxes the exhaust manifold gaskets blow out start to leak. my dads '69 3/4 ton 2x4 had a 360 that burned oil like crazy so we dumped in all the tractor waist 15w40 & 85w even hydraulic oil. when i was 16 i drove it to church every sunday and i reeked like ford. thing had no brakes at all so i'ld shut then engine off on the hwy while turning into the church parking lot and slowly coast into a spot. that damn truck could pull 3 minnesota 250 gravity boxes of shelled corn! i sure miss that truck
@farmalmta
6 жыл бұрын
LOL... pulling 3 gravity wagons of shelled corn at once may explain the rest of the story you told.
@briana3467
5 жыл бұрын
The good old days.
@olmoe1167
6 жыл бұрын
You got a Great deal on this if you got it for a Grand... From what I can see of her,,, She's got some rust around the wheel arches,, but LMC sells patch panels that can take care of that...(noticed your Ball cap)...lol I'm partial to short wheel base trucks, but they're getting harder and harder to find... Besides if you need a work/Farm truck an 8 ft. bed is much better for hauling.... My daily driver is an all Factory '76 f-100 swb, 302 2 barrel A/T, with Factory A/C... Have people asking if I want to sell it all the time...lol Sure would love to have that sliding back glass you got in yours,,, The old original ones like that are getting impossible to find.... Looking forward to seeing more on this one....keep up the great videos....
@ericbuff5888
6 жыл бұрын
Don't forget the 352 FE. My 67 f100 had a 352 with a fmx/c5 auto. Set up as a camper special. Fast no, power to haul all day YES.
@johnkendall6962
5 жыл бұрын
My fathers F-250 was his work truck and my go where I wanted truck on the weekends or if he didn't need it 352 cu 2 barrel 3 on the tree and no power brakes no power steering Clutch so heavy my leg would start to shake at red lights . Wish I still had it.
@tnaccountability7455
3 жыл бұрын
The FE is the family engine block is what gm copied for the LS. And their ford valve placement
@ct9827
5 жыл бұрын
I had a 68 LTD interceptor 390 4 bbl headers cam not a bad engine at all very smooth power.
@fk4515
3 жыл бұрын
Ah but technically the 360 was a FT engine (Ford truck) as opposed to a FE engine (Ford-Edsel) another FT engine was the 391 but I don't think they were used in any light trucks. IIRC Ford offered no 4BBL carburetors stock during that era. We bought a new 1972 F350 crew cab and a New 75 F-100, both with the 361 FT engine. We spun a bearing in the F-100 and it got put back together with a 4BBL intake from a 1966 vintage 352 (FE) and a Holley carb.
@justskinnot2seriously71
3 жыл бұрын
Love love love my 1976 camper special f250
@Mcleod0000
6 жыл бұрын
I didn't think you could handle a 390 engines power, till I heard that music at the end
@danieljonhson6367
4 жыл бұрын
I had a 1970 Ford F100 with a 360 in it and several friends had 390s they are good motors , but if you value your life don't put either one in a mustang.
@errolpoxleitner7901
3 жыл бұрын
No don't do that put a 428 in it like I did
@cammontreuil7509
2 жыл бұрын
I put a 427.
@jesusisalive3227
3 жыл бұрын
I just did this a couple weeks ago on my new to me 1971 f100, the truck has a 360 sticker on the air cleaner 😞 but it ended up being a 390 😁 it does have a 2 brl on it but I have a factory original 4 brl intake waiting to go on it!
@piratecat4519
5 жыл бұрын
Mine actually had a metal tag on the distributor hold down bolt that was stamped 390.
@chrisadam8103
6 жыл бұрын
Easy way check VIN numbers or block numbers. Through Ford they can give you the info. Easer.
@ThunderHead289
6 жыл бұрын
You could check the vin. But a lot of guys sell engine not in a vehicle. Can’t check the block casting numbers because a 360 and 390 are the same block
@randymelendez7803
4 жыл бұрын
Or somebody puts a 2U crank and 390 rods in the 360 block. Gotta measure to be sure
@tbjtbj4786
3 жыл бұрын
My dads 74 4x4 f100 had a 360 with a factory 4 b. You know the way ford used parts any thing can happen.
@georgebonney90
6 жыл бұрын
I dnt think I'd have he heart to part out this truck,I'm glad u changed ur mind
@jesse75
Жыл бұрын
Side by side. In a pulling driving comparison, there is no difference in a stock engine. But now if you were to compare and put a 390 out of a 68 car, now there's a difference. Like any engine, the 360 responds well to adding a good old cast iron 4 barrel intake. Now if I had the choice of a high compression 360 over a stock compression truck 390, I'd take the 360. What both engines need is compression. But with today's garbage gas, you can't expect good performance from these leaded beasts.
@joealbert7773
6 жыл бұрын
Would you believe that you can put a 390 crank in a 360 with all 360 parts and the engine will run? Traded for a Ford truck at the dealership that had a bad rod bearing. Got a new crank from the local NAPA. When we started it, it sounded like a diesel, but it ran. The technician thought it might be the wrong crank, but I was sure that the pistons would hit the head with a 390 crank. They didn't, but the compression ratio was out of sight.
@timc2346
4 жыл бұрын
Good tip but if it's original you can identify with the VIN.Provided it's is original.
@dennisschell5543
6 жыл бұрын
If it ends up 3.98" stroke you have a 428 crank in there.....like me! 😎
@rmo4222
5 жыл бұрын
which would be factory 410 mercury which was only made in 66 and 67.
@chuckwhitson654
4 жыл бұрын
With what piston+ rod combo to be level deck height? I'm not sure myself and if you aren't please don't answer but you are saying 390/428 are same bore? Please do tell
@Terminxman
4 жыл бұрын
which you can't accomplish with a 360/390 block
@Terminxman
4 жыл бұрын
@@chuckwhitson654 They aren't the same bore, and you won't have enough of cylinder wall to bore a 360/390 out to 4.135 in
@garysimonson9593
3 жыл бұрын
Or a Mercury 410.
@redtailhawk289
Жыл бұрын
Never put the butterfly fastener on the open carb stud even though its plastic if it falls in the eng. you will have a bad day .
@rickchambers73
Ай бұрын
I would have mark the straw at TDC then again at btc. Then meaise between
@robotseattrees9386
2 жыл бұрын
I have a 77 took out the 300 and put in a 69 360 I want to bump it up some though
@chrisduhaime5689
4 жыл бұрын
390 are rare in trucks most were 360 . Camper and trailer special 250 good chance to have 390 . For what ever resons they put more of them in the car's than the trucks . Galaxy cars were good doner finds for up grades for those late 60s years. Eye went with the Lincoln 460 AC compressor all . 72 4x4 250 4 speed NP 435 witch is a trick because 460 did not come with manual . 5 /8 spacer plate 400 m bellhousing cut down bronze bushing into the next step down in the crank and re use the same fly wheel it can be done . Lincoln's were ever where . But the motor craft carburetor had to go! And stock distributor. After that hang on !
@vernonknight8611
6 жыл бұрын
I had a 1972 390 2V rated at 265 hp. After 1973, the 390 4V was rated at about 175 hp
@ronniecarroll3929
5 жыл бұрын
What happened why did they drop power
@typrus6377
4 жыл бұрын
@@ronniecarroll3929 Emissions. Compression drop. Change in rating methods. Plenty of reasons.
@JohnnyRebKy
4 жыл бұрын
Why do people avoid the 360?? I had a fresh one in a 76 Ford and it would haul the mail! Of course all the smog stuff was gotten rid of and it had long tube headers w|glasspacks. For basically stock it was pretty impressive for a truck
@netrioter
3 жыл бұрын
The bottom end goes out too easy. Bad oiling
@JohnnyRebKy
3 жыл бұрын
@@netrioter ok...not saying your wrong. But it's a truck engine for lower rpm torque. I never saw one loose a bottom end BUT they weren't being raced either. I reckon everything has a strength and weakness. 360 is a good truck engine but prob not good behind a 4 speed and lead foot lol. My brother in law blew the lifters plum out of their holes on a 460 I had. It had a crane torque cam and 410 gears behind it. Would have ran 40 years with me driving and lasted one night with him. It was a stump puller not a drag car. But it was fast for 2 city blocks LOL 😂.
@MattsRageFitGarage
2 жыл бұрын
@@JohnnyRebKy The 360 isn't any weaker of a bottom end than a 352 is, and they put those in millions of cars from 58-67 and you know damn good and well lots of kids screamed them to the moon. I know I did, 6000 RPM and it didn't blow up! mostly the reason why people avoid them is terrible piston to deck clearance and they usually suck a lot of gas.
@danieljonhson6367
6 жыл бұрын
I owned a lot of old Fords and I've had the 360 and 390 I prefer the 360 it seemed to have a quicker take off at least the one I had did
@Terminxman
4 жыл бұрын
That would most likely be because of the smaller 2 barrel carb (at least stock)
@haroldchase4120
6 ай бұрын
I know my engine in my 68 F 250 is a 360 . She does everything I require
@the_hillbillytransportatio3143
5 жыл бұрын
Look on the block driver side front the number stamped will tell u what the block was originally built as by ford
@ThunderHead289
5 жыл бұрын
Michael Locher it doesn’t on a 390 - shares the same block as other engines.
@the_hillbillytransportatio3143
5 жыл бұрын
@@ThunderHead289 352 360 390 406 were all originally stamped by ford I can't justify what happened to them in the past 60 years. We've got several fe engines around they all have a number stamped on them its how ford marked them idk as for the 427 428 429 460 even tho experts say there fe engines to idk
@ThunderHead289
5 жыл бұрын
Michael Locher there are numbers stamped, but you can’t tell from the block numbers if it’s a 360 or 390. It’s just the way it is. - that’s why this has always been a debate. Why when someone is selling, it’s always a “390” and when buying it’s a “360”
@the_hillbillytransportatio3143
5 жыл бұрын
The ford manual shows 352 390 406 427 428 has 2 digit number n three digit number under it that for the factory engine size On the driver side front right below the cylinder head
@the_hillbillytransportatio3143
5 жыл бұрын
@@ThunderHead289 I was just trying to point out there's several ways to tell apart On the outside the fe n 385 share a lot but there's a difference between the two 360s n the top oilers side oilers the year they were built. I know what u mean I bought a couple old motors that were supposed to be 390 but blocks say 360 so I gotta discount but the average person wouldn't know the difference between them
@youngestson6537
2 жыл бұрын
Very informative video 📹 👍
@Zib187
6 жыл бұрын
My uncle would use the coffee cup test instead of the nickle test.
@slimjim119
6 жыл бұрын
360 sits about 1/2 an inch down the hole if I removed the head with a flat top piston
@Drinksalotobeer
6 жыл бұрын
Thanks! I've learned alot from your videos.
@user-tn1hk6zm2freedom
Жыл бұрын
When number 1 is at the top number 4 is at the bottom.
@DHAW10
6 жыл бұрын
Great tip and a cool truck. How about a quick tour?
@markvanleeuwen6678
6 жыл бұрын
pretty slick idea.. i just learned something.. thanks,
@davetrenholm7291
5 жыл бұрын
There is no appreciable difference between the two in stock form. The 360 only came stock with the 500cfm toilet bowl Ford used on everything. The 390 came 2 or 4 BBL. Get a 428 Crank, Balancer, Flywheel and pistons of course for 412 CID, 418 with a .30 overbore. .
@thomasfroberg1294
3 жыл бұрын
Why didn’t you use a bump start and use a pushrod and dial indicator?
@KayakTN
6 жыл бұрын
Check the VIN? My '73 came with a 360.
@willb5272
5 жыл бұрын
"Came with," and "what's in it now," are two very different things lol. In the endless pursuit of power and reliability, everyone and their dog did an engine swap back in the day
@dandunning4409
3 жыл бұрын
My father had a 1974 F-100 came with the 360. He said it burned to much oil so at 30K he took it out and put a 390 2 bbl in it. Couldn't talk him in to leaving the 4 bbl on it. He put the intake from the 360 on the 390 so he could run a 2 bbl. Still ran way better then the 360.
@garageworm17
6 жыл бұрын
The 4th number should be an M if it's a 390 the 360 would be Y and the 390 2bbl is H
@ThunderHead289
6 жыл бұрын
On the block or the vin
@garageworm17
6 жыл бұрын
@@ThunderHead289 srry friend the vin
@mikeevely2930
5 жыл бұрын
4th number where sir?
@liveandletlive2894
4 жыл бұрын
@@garageworm17 where is the vin on the engine
@garageworm17
4 жыл бұрын
@@liveandletlive2894 it should be on the passenger side of the block were cylinder 2 is friend if the motor is stock the vin number on the body or door if they are original should have it in the vin code
@georgebonney90
6 жыл бұрын
This is a great test thx for making a vid on how u did this
@MSG4LIF3
2 жыл бұрын
I have a 390 ford galaxie 500 1967 with a Camshaft, Hydraulic Flat Tappet, Advertised Duration 274/286, Lift .562/.565, Ford, Big Block FE. And wanted to put a torque storm single supercharger and can i run it with out doing any work to the steal heads? Or do anything else to engine?
@graysonkremeier
Жыл бұрын
How do you tell this when buying one though?
@chuckwhitson654
4 жыл бұрын
Wait wait wait. Cubic inches= bore x stroke. So the shorter stroked o e will always be smaller cubic inch if bore is equal
Пікірлер: 359