I recommend flushing your engine with this kit from BG before changing your VCT solenoids- amzn.to/2nsfvBT
@rachelejohnson1604
7 жыл бұрын
I just changed my VCT solenoids...can I still flush with this kit? Will it cause additional problems
@pattywalker7597
6 жыл бұрын
FordTechMakuloco what's your take on cam phaser lockouts, on a 4.6, 3 valve do they decrease hp or throw codes
@pattywalker7597
6 жыл бұрын
FordTechMakuloco please explain cam phaser lockouts, do or not good or bad I'd really appreciate your opinion on this topic. 4.6 3 valve
@haxxorsheep
6 жыл бұрын
I wish you lived by me. I'd pay you to work on my truck. Every shop I go do not fix it or they make worse and charge me way to much.
@gueroflores1467
5 жыл бұрын
FordTechMaculoco will bad vct selenoids cause some kind of bogg to your engine I got the 5.4 3v ..put new timing kit new phasers cams lifters too both sides and it's doing that bogging at 1600rpm or 2000rpm once I push on the gas pedal it will act normal I got no engine codes yet
@robertrpenny
Жыл бұрын
Ford should give a free 5.0l engine to everybody that owns 3V junk. And install for free. Them Tritons are nuff to make you loco.
@35ariman
2 ай бұрын
Amen!!! I have an 09 f150 and it runs great but I’ve had to do some work to it
@bobbyhempel1513
2 ай бұрын
I've got a 2010 F-150 with the 4.6 3v and it's got over 220,000 miles and just started having this issue. I've heard of worse problems with the 5.0 at less miles.
@Painnazzautorepair
26 күн бұрын
Here a free slightly less junk motor to replace the 3v major piece of shtt
@spelunkerd
6 жыл бұрын
How do you tell the difference between a vehicle that has a bad VCT solenoid compared to one that needs new phasers or timing chain? Do they present in the same way, with different trouble codes?
@HazardWolfCorp
Жыл бұрын
Can this cause a rough idle with NO code but when driving everything seems fine?
@MrFafolaktik
2 жыл бұрын
Thank you for the great explanations as always. Unlike many tubers who just show how to replace parts, you actually help us understand if it needs to be replaced in the first place and how as well. Thank you for all the help. 2008 F250 3v 5.4L owner.
@newcoyote
6 жыл бұрын
This is definitely something to look into before doing a full timing and phaser job. My truck was making the same sound and symptoms. I took it to a shop and they said cam phasers. "Oh yup! 100% for sure." and quoted me an absurd $4500. I looked into it more on my own and changed the VCT solenoids myself and presto! Solved. I'm not saying everyone will get lucky and have such an easy fix but it is worth looking at first. Be vigilant and get properly diagnosed before shelling out. There are a lot of unskilled shops out there and dishonest ones.
@DavidJackson-zg5my
5 жыл бұрын
newcoyote I currently have an issue and I was also thinking of changing the VCT solenoids prior to doing a full timing job. I was wondering what signs and symptoms you were having. I’ve got the classic where everything seems fine until warmup, then a miss develops, rough idle, then under load on the highway a miss is present as well. Codes I’m getting are bank 2 P0345 and sometimes P0349 which are all associated with the cam phasers as you know. Hope to hear back from you...
@SangheiliSpecOp
3 жыл бұрын
Even if it was the phasers, 4,500 is a number they are pulling out of their asses lol. I could buy four 4.6L engines (I drive a mustang) for that money lmao
@josephgarza2586
2 жыл бұрын
Most of em are fucking scumbags str8 thief trash they make me sick
@hunterprice287
2 жыл бұрын
@@DavidJackson-zg5my what did your issue ended up beingp
@kstevenson186
Жыл бұрын
Was your truck dying when you came to a stop
@_kvngmilton_5522
3 жыл бұрын
You are one of the Most helpful souls on earth I think u just fixed my 3 days of stress I don’t know yet haven’t tried this but I also have another vehicle reply and ile give you the details
@rockerbigjoe5711
2 ай бұрын
Why does mine only do It in reverse pushing a load.?
@187WCB
8 жыл бұрын
Seems like a really problematic engine given all the material you've posted on it.
@FordTechMakuloco
8 жыл бұрын
+MikeP47 this is true
@MrFerrill
7 жыл бұрын
I think it's a great engine, 270k on mine not one engine issue yet (well till now but counting on it being something small)
@michaelwerbick
7 жыл бұрын
Thanks for the informative vids. Well explained and has solved a few problems on my wife's 190k mile engine. Although there are issues, it's still reliable and better than new payments today...lol
@Mr.Beauregarde
5 жыл бұрын
Fucking engineers, amirite.
@Markomyt1
4 жыл бұрын
What are you talking about? This is the cornerstone of Brian's business! And Ford put this engine in everything.
@juanagudelo409
Жыл бұрын
This is exactly the same sound that my 2006 F150 5.4L is making. I thought i needed a new engine! Thank you so much for the video! You are a blessing.
@hoddy2001
11 ай бұрын
what's curious to me is that at the point where the VCT gets stuck advanced at 5:37, the sensors are sending VCTADV around 0 and VCTADVERR also around 0. Just prior to that you can see the VCTADVERR walking left and hits the O (out of limit) and then returns to zero. I would have thought the out of limit circle would have remained blue on VCTADVERR. Thanks for all your contributions my man we appreciate you
@grantrose3625
4 жыл бұрын
I have a Ford F-150 2006. I be changed the cam sensors and VCT solenoid last year it went smooth for about 2 months. The past it it’s been running rough and dragging when accelerating hard to get too speed. I removed the valve covered and timing cover. One of the guides and tensioner were broke. I changed the timing chain and guides the same way as in you videos but it runs but dies when I slow down. My truck has 202,000km on it.
@thuglivintv824
2 жыл бұрын
Did you fix it?
@MrMobileAutoService
Жыл бұрын
Excellent video and information. We did an oil change to one of these engines the other day. Our customer is really good about maintenance and we always add Rislone engine oil treatment to these engines as a safeguard. Even so he had a problem with one of his valves shortly after the LOF. We dispatched a tech to his home with two valves in hand. He's been fine ever since. Only 116,000 miles on the engine. Thanks for your video.
@johngoss5525
Жыл бұрын
Hey bud like your channel great stuff do the 2004 5.4 f150 have a pcv I'm having trouble finding mine
@MrFerrill
7 жыл бұрын
You got all the intel on these 4.6 5.4 engines 👏🏼... I got 269k on my platinum and starting to have some issues and a couple "mechanics" just want to start throwing 20 different parts at it. I have a huge loss of power, mpg dropped, slight ticking (maybe tick has always been there just notice more now), No codes, smooth start and idle, any ideas? Oil replaced about 3 months ago 10w-30 synthetic I believe, any help would be much appreciated
@GlossyLake
6 жыл бұрын
Alfred Ferrill did you ever get those problems taken care of? And if so what was the solution??
@michaelbefumo-qg7ji
Жыл бұрын
I unplug my solenoids and you just heavy wire from the battery post to their solenoid and shocked it even sending power the wrong way the song it's just click click the solenoid immediately started running smooth mine happens to be the driver side, I couldn't believe it cost me a dollar and I was about to do a timing😅 and it still running great and that was 6 months ago these 3-valve 5.4 Triton have to change the oil nv4500 miles at most with good oil
@riding2nowhere
Ай бұрын
I got a 2010 f150 I unhooked the vct on bank 1 and 2. Drove around a couple days. Hooked the vct back up, it started and then died. Unhooked them again, now trys to start but won't. What happened???😢
@ozzstars_cars
8 жыл бұрын
good video. I don't understand how the software is allowing you to see the data of both solenoids with them unplugged. Is the camshaft sensor data what we are actually looking at for the timing values? Thanks
@FordTechMakuloco
8 жыл бұрын
+Ozzstar yes
@moneymakin_ro9486
2 жыл бұрын
My 06 mustang gt has been doing that loud knocking noise after driving for 10-15 minunte!! And all of the mechanics kept saying my timing was good! Wow im happy as ever i seen this !
@michaelbefumo-qg7ji
Жыл бұрын
Yes especially when it's hot cam phasers will make more noise hot, a lot of people don't know about these what the cam phasers and the solenoids that controlling
@siliconvalleyengineer5875
3 жыл бұрын
I just change both of my 2009 Expeditions 5.4L VCT solenoids, per your recommendation I installed Ford VCT's. Getting the valve covers off was really a hassle because of all the hoses and electrical in the way. I took the Expedition for a drive after the new installations and it had excellent engine throttle response / power and acceleration. I had to redo the passengers side valve cover gasket, it leaked but now everything is good.
@UserUser14880
Жыл бұрын
Only symptom i have is after battery reconnnect and relearn process. Coming to a stop it down shifts hard and sometimes wants to die. I purchassd vct valve bc i too have a valve cover gasket leak on pass side lol. So if i replace 1 might aswell do both. And while im in there. Change the vct.
@bobbyhempel1513
2 ай бұрын
My truck started doing that but the code was for the bank2 cam shaft position sensor so I replaced it and about 30 miles later it did it again but never threw up a code and hasn't done it again. 225,000 miles on a 4.6 3v.
@nickad55
5 жыл бұрын
HI, i have a 5.4 engine with the code p0012, would this code be able to let the computer turn off the spark to one cylinder. i have been told the computer could save he engine by turning off , cylinder deactivation, to save the engine. than you jim
@smileyornelassr941
3 жыл бұрын
Complete Cloyes kit installed plus both cam p-sensors & vvt's: also pulled pan & cleaned out, including tube, changed oil w/Penn 5w20w full syn & filter. Does fine thru test drive until it reaches operating temp, then lacks power & stumbles/rough idle if @ all Codes PO012 & PO022. Any help appreciated. THX
@SamsAutomotiveS
2 жыл бұрын
Heloo there did you find out the issue
@madmodsgarage1179
4 жыл бұрын
hello! what is the vct solenoid frequency for a 4.6 3v from mustang gt 2005-2009? Engine runs on standalone ecu, I'm trying to run the vct system
@cotynietling2567
4 ай бұрын
I put two brand new vvt solenoids in and new oil and oil filter nd now my truck runs way worse violently shakes and you try to drive it and it bogs down has a metalic rattle at 40 to 45 it bucks and surges any ideas
@anadavidf6163
2 жыл бұрын
Thank you. This video confirmed that my engine does this because it sounds just like this.
@UQRXD
Жыл бұрын
Just when you think the engine can't be any more crappy. Oh yes it can. Never again a Ford for me. Never , ever never\ again.
@mick5740
3 ай бұрын
Im back again 4 years later. Need to replace the seals as they are leaking more and more !!
@18winsagin
6 ай бұрын
Mine does it low rpm and especially backing up slowly. It really raises hell til I rev it up .
@pauln2177
4 жыл бұрын
My 2007 f150 5.4 sometimes the engine will start shaking and hard knocking when backing up or come to a stop..us it vct or cam phaser
@Wolf-qy7ri
4 жыл бұрын
Paul N I have experienced the same problem on my 2007 did you find the culprit?
@blackstonshingaling
8 жыл бұрын
Does this mean in actuality that the unit needed to be cleaned and a new spring put in?
@randyragon
8 жыл бұрын
+Blackaboe With that many miles the magnets can also become weak and not move the piston correctly. I have rebuilt one before, as a temp fix back when there was a shortage of new ones. It made it three weeks before it started acting up again. And I have used after market generic that didn't last a year. Always replace and use the quality ones Brian is recommending.
@danielangeles4953
6 жыл бұрын
I did the chains two times with the same code p0022 i also replace the soleniods but i got them from the autoparts
@rrmech11
8 жыл бұрын
Excellent explanation of the operation of the solenoid Brian. How much is the IDS scan tool?
@landonblaylock7324
5 жыл бұрын
I had a question I did my timing and everything and it runs great but when it gets warmed up it gets a hesitating a cutting out then after awhile it gets a p0011 I believe it has a new dorman Vtc solenoid could that be my problem cause my timing set and cam phasers are from ford should I go with ford solenoids
@Metalbass1979
4 жыл бұрын
Exact same thing happening to me! Did you get the problem solved?
@agsolis37
3 жыл бұрын
@@Metalbass1979 did you figure out the problem? I’m having the same issues. Already replaced phasers chains and the guide rods. Running out of options. This is my second engine. The original only lasted 135k miles. The engine it has now is a crate engine purchased from a Ford dealership. It only lasted 65k miles.
@Metalbass1979
3 жыл бұрын
@@agsolis37 Unfortunately, no. The thing totally siezed up on me and I haven't had a chance to mess with it. I'm going to try again this Saturday.
@meanodustino9563
6 жыл бұрын
Love the channel I have a 05 f150 5.4. Ran beautiful had 200k miles. Just changes my oil from a 5/30 -5/20 for winter in Canada. Truck will hardly run the next day. Misfires. P0010 P0012 P0020 P0174 P0351-P0358 P2196 Plugs and coils I have changed 40k miles All plugs are clean. VCT? Cam sensor?
@maseton1367
8 жыл бұрын
are the F-150 5.4 3v vct solenoids different from a F-250 5.4l 3v super duty and if so what would happend if u do get them mistaken?
@seemeefalcon7160
3 ай бұрын
You the best man ❤
@jeremystewart2100
7 күн бұрын
Would I still have to time it if I change vvt ?
@KT-hz4oh
7 жыл бұрын
First of all thank you for your videos they have helped out so much! I recently had all the timing replaced on my 5.4. I have drove it around forty miles since it was replaced and today I got a p0022 bank 2 code. Where do I go from here? Oil pump, cam position sensor or something else?
@AB67
6 жыл бұрын
I did the same on a 4.6 and the same codes came back, P0010 and P0020, truck seems to runs okay, just has been worse on gas mileage. I have no clue what else to do now?! I need a solution!
@Dayalalito001
4 жыл бұрын
@@AB67 i junked mine
@reggienoble571
4 ай бұрын
When bench testing my original Ford VCT's and new Amazon VCT's neither open very far. I'm applying 12v. You can hear the solenoid actuate, but it just barely moves. In the opening, how far should I see the valve move?
@codyj7980
3 жыл бұрын
So can you just leave them unhooked instead of replacing them?
@daduze2
2 ай бұрын
This is what I am reading the comments for. I have mine unplugged now and it runs better. Just rough when sitting in park.
@DibroTeam
Жыл бұрын
I have one problem. After long driving in high rews when I stopped sometimes engine start working like diesel. After i turn off engine and start it again everting is okay. I don`t have engine code in few months I have P0340.
@josuepocasangre7583
2 жыл бұрын
Hey can you tell me what scanner are you used ????
@CTRLALTDayman1776
18 күн бұрын
He's using Forscan. It's a free Ford diagnostic tool on PC, iOS, and Android but you'd need a USB to obII or a Bluetooth adapter
@odin0425
4 жыл бұрын
Old video, but new question. I bought a 08 F150 with a V8 Triton engine. When i test drove it, everything was perfect. It drove fine for a few days under normal use. 4 days or so after owning it i was parking it, backing up, pulling forward, normal parking behavior. My engine started shaking badly when stopping, but gaining power again while advancing. I am trying to figure out if it is the VCT solenoid, or the Phasers going out. At normal Idol, i don't really hear any diesel noises. I have also noticed that this only comes up when the engine is up to temp, and that when i disconnect the VCT solenoids the engine purs just fine and there is no real problem. (just a lack of power). So agian, i must ask, is it the phasers or vct solenoid? Second question, If i leave the solenoid disconnected will i end up damaging the phasers, or timing system? This is my first "real" vehicle so im getting nervous about it. I've always just drove junky cars that would last a few years before i bought a new one. This one I actually have several thousand dollars to pay off. Any help from anyone would be apriciated.
@443red
4 жыл бұрын
How did you make out with your 08 f150?
@443red
4 жыл бұрын
Mine is doing the same thing with a code P0012,I am going to replace the vvt solenoid
@odin0425
4 жыл бұрын
@@443red I replaced the drivers side solenoid as my code was related to it, and I can still hear it although much reduced and may be from passenger side, but ya the truck runs much better. I plan on doing the passengers side next week. the 07+ F150's you HAVE to remove the valve cover gaskets, so drivers took me about two hours, passengers hopefully will take less unless I have to pull the AC lines. I also went to full synthetic 10-30, and filled to the top of the dipstick line hoping that more pressure can overcome some of this engines short comings.....I was just happy that no plastic or anything like that could be seen in the used oil. Good luck with yours!.
@ADHD_Gamer
Жыл бұрын
OK so I have a question, if they are disconnected and you can still drive normally. what is the purpose of them? I know mine is faulty, I just replaced both the CPS since the tool said those were both retarded - could this be because the VCT is faulty? It said bank 2
@clmkc5393
9 ай бұрын
I have a 2015 Ford Explorer Limited. I needed to replace the Variable Valve Timing Solenoid (VVT). The Solenoid was "stuck" in the housing. I was eventually able to remove the solenoid. However, in doing so, i broke off the flange ear on the VVT housing. This is where the bolt goes in that holds the solenoid in place. I need to purchase a new/used VVT housing bracket. Its a separate piece above the timing chain. Do you know what you call this VVT housing bracket or mount? I cannot find the proper name for the housing and need this to complete the job. Really appreciate any assistance here.
@giovanicoelho3772
8 жыл бұрын
Hi FTM. I hope you are well. First of all, I would like to congratulate you for this work. It's helps me a lot. Keep this work! Thanks to you I could change the spark plugs and vct solenoids of my 2010 Ford Edge with no issues. Thank you very much. Do you have any contact (email) that I can use for any questions/help? Take care! Cheers
@mrfixit9832
2 жыл бұрын
Your videos are very good! I Disassembled my solenoids and wet sanded the plungers with emery cloth, stretch the spring out so it would be stronger, oiled them and reassembled and runs great now, thank you!!!!
@rodhawkins5037
2 жыл бұрын
Interesting, how's that holding up?
@Chrisrobba
2 жыл бұрын
My truck starts and idles fine but after it warms up the worse it sounds and drives. Sounds similar to the noise here, is it a good possibility this is my issue? 200k miles 04 f150 5.4, can I clean these just to get a idea if they are sticking? I don’t have a scanner unit.
@hgallegos915
4 жыл бұрын
I have bank 2 over advanced. Replaced everything. Oem parts.. except oil pump. Updated Ford phasers. My engine has small vct sensor covers. :( Replaced just one.
@VitaminE-82
2 жыл бұрын
I have an 05 F-150 with 5.4 triton. I'm showing error codes P0349, P0345, & P0022. My truck has been having a rough idle so I after I researched I noticed VCT solenoid. I disconnected the solenoid it ran fine. I ordered a new VCT solenoid replaced it and now it back to the rough idle after slowing down. Is there a secondary VCT or could it be the sensor?
@hoddy2001
11 ай бұрын
another question: with the vct disconnected, what is generating the force to move the valve inside the solenoid against the spring? Normally it is the electromagnetic force from the solenoid that will push it down against the spring, but how is it moving down against the spring on its own? I could see if the spring was completely broken or missing that it could fall down by gravity. Is there oil flow within the vct valve body that moves it?
@ChrisCarlsonAntonio
3 ай бұрын
Great content. Thank you! Is it work removing everything else to access and service the housing while I’ve got the valve cover off, or is that unlikely to contribute to the problem?
@mr_j7274
2 жыл бұрын
Great video; always learn alot from them. My '05 5.4 Expedition is having all of the same issues as the vehicle in this video. The knocking and stalling starts after driving the truck for a few minutes. I hooked up my TOPDON Diagnosis Scanner and it is pulling a P0345 "Camshaft Position Sensor A Circuit Bank 2" error. Would replacing my VCT Solenoids fix my problem.
@isaacdepoe8157
Жыл бұрын
I've had the ame thing I replaced both of the sensors snd I'm working on doing the vct if not that it's gotta be the tensioner
@rocketmouse5361
2 жыл бұрын
Long story short.. I purchased a 2013 Ford Expedition EL Limited with 170000 miles on it 2 months ago and all of a sudden it started throwing misfire, camshaft positioning sensor codes, P0025 as well.. I finally got rid of the misfire codes by changing my fuel injectors. (Already changed Coil Packs, plugs, both camshaft positioning sensors and my VTC Solenoids. Now, the only code I am getting is the P0025 with a rough idle after it warms up and engine stalling.... Have taken it to two different mechanics and still no answers. First mechanic said VTC solenoids and the second mechanic said timing chain stretch or I need a new engine.... UGGGGGHHHHHHH. What else can I look for?
@j.r.6504
3 жыл бұрын
Please help my truck 2006 5.4l 3v have this code P0012 it started today engine light flashing when I bought it oil was coming out of the dipstick. That was 2 weeks ago I got the Vct selenoids replaced and that fixed the problem with the oil coming out of the dipstick. But now the engine light is flashing with code p0012 no clicking sound.. it drives good it only does it from time to time it vibrates at times during the day. And it also showing code p0430 Cat I was told it might need the timing chain replace. But I don’t heard no ticking noise. Truck shows 55,000 miles. With carfax history. I’m hoping they are original miles.
@jacobcarr3078
7 жыл бұрын
I'm getting both of these codes on my 2004 f150. I have done a engine flush and changed both vct solenoids and I'm still getting these codes. Not to sure but It seems to have p0012 at idle and p0011 while driving. Had the oil pressure checked and they said it had good pressure so not sure what to do next. Can you give me any advice. It has a really rough idle.
@thuglivintv824
2 жыл бұрын
Did you fix it?
@jacobcarr3078
2 жыл бұрын
@@thuglivintv824 yes I had to change out the cam phasers
@laschell59
2 жыл бұрын
My neighbor just told me this was my problem. I bought 2 new ones and DAM IT runs again 😁
@andrewwebb507
Жыл бұрын
Have you ever had one not run very well after it warms up? I have replaced everything plus the Mel high flow oil pump. I have a scan with HP Tuners from a cold start. When it hits 152° coolant temp, the timing goes crazy. Then stft’s go nuts also.
@panchovilla9820
3 жыл бұрын
Si podrías esplicarlo en español XF grasias saludos desde cdfdz SLP México
@GlossyLake
6 жыл бұрын
I just replaced all the spark plugs and the truck is running much better than when I bought it with 250,000kms (155,000 miles) on it. I don't have any codes but in Park, Neutral, and while stopped in Drive, the truck idles rough! Anything like this you've experienced? And would replacing the VCT solenoid help?
@rileycrowley7721
7 жыл бұрын
Thanks for all the great videos. I went through and did the complete timing on my 04 fx4. Unfortunately I still have an issue with some sticking valves. Do you have any cheap or easy ideas for that before I tear it all apart again?
@nfsking4826
Жыл бұрын
Did you put out the rocker arms on passenger side?
@MormonMustang_
8 жыл бұрын
Why is the Crown Victoria 4.6 bullet proof and the 4.6 F150's are crap. I've had both and beat the crap out of the CV. I was much easier on the F150 and it blew head gaskets etc. it was a crap engine. A friend of mine had the same issue with his truck. I want the 2.7 Eco really bad. I love my 5.0 Mustang. Beast of a car.
@jonathanwallace9976
4 жыл бұрын
04 f150 only code po022. Bank 2 replaced vvt solenoid with Ford vvt the truck runs good I flushed the oil with bg epr and changed to motorcraft 5w30 but code want go away and hear rattle in tail pipe especially when accelerating can a clogged cat cause this code to not go away when cleared are is it something else truck drives fine and accelerates fine just the rattle in pipe and the code I’m lost can’t figure it out
@hunterrieger7269
2 жыл бұрын
My f150 08 5.4L has a rough idle and low rpm. When I’m in reverse or going forward to parallel park it shakes and rattles and sounds like it’s going to stall. It sounds just like the issue in this video
@timbroom2328
2 жыл бұрын
I have a 2009 f150 with the 5.4. Had some issues leading me to believe it's bad vct. Took the one from bank two and found metal shavings. Does this mean my engine is shot?
@90srappowe93
5 жыл бұрын
Hello my name is Bam the barber I just purchase me a 2006 Ford F-150 King Ranch and I have that problem right now about the solenoid please get back to me and let me know what I should do
@marcaliz3841
Жыл бұрын
I have no check engine light but I don't like the slight ticking sound I get from thr engine
@Ken19700
8 жыл бұрын
What's the ford part number for these solenoids?
@FordTechMakuloco
8 жыл бұрын
+Ken MacMillan The latest parts are in the video description.
@TheMarky26
3 жыл бұрын
Dang i think thats what's going on with my 4.6 explorer..Will just replacing the solenoids fix the problem?
@chiefpipelayer26
7 жыл бұрын
FordTechMakuloco, I have a 2004 F150 new body style 5.4 3v, the VCT solenoids you reference says its not compatible with my vehicle. These appear to be the same only the updated version (8L3Z-6M280-B), will these fit my specific year or am I missing something and need 8L3Z-6M280-A?
@JLH_LetsPlay
Жыл бұрын
After I poured some thick engine treatment into my Edge, I guess it got into the valve and kept it from functioning properly because the engine light came on and it was shaking bad. After I drove it a while it straightened itself out and it runs great now.......no issues.
@matthewdickson213
2 жыл бұрын
I have a 2007 f-150 with the 5.4 3v the truck runs good and has plenty of power when cold as soon as it hits operating temperature it gets very sluggish and it is hard to keep a consistent speed without down shifting it is throwing a code saying that the timing is over advanced on both cams any idea what could cause that?
@BrFishWPB
3 жыл бұрын
I have a 2004 F150 with the 3V and when I follow you link to amazon, they say it will not fit my truck. i can't seem to find the OEM parts online for the 2004
@petemeraz3464
4 жыл бұрын
@fordtechmakuloco I changed out my vct solenoids. Now I don’t have any brakes also it’s is now shaking when it didn’t before. Could you give me any clues on what it could be. Thanks
@FordTechMakuloco
4 жыл бұрын
Brake booster hose fell off of the intake side
@petemeraz3464
4 жыл бұрын
@FordTechMakuloco yeah i found it thanks for the heads up and help, now I just need to put it back on. All I’ve read is I need to pull the intake to hook it back up please tell me that it not the only way.
@petemeraz3464
4 жыл бұрын
@FordTechMakuloco ok got it back on and the truck runs amazing never felt her have this much power. Thanks you are awesome
@mikepruett1745
2 жыл бұрын
how bout code 0021 these fazers go bad and make all kind problems??
@armyboy860
2 жыл бұрын
Hey sir! Is there an email I can reach you at? I have an issue with a 4.6 3v that I just can't seem to figure out and I want to run it by you with what's going on. Please let me know!
@geraldwalker2067
2 жыл бұрын
I have a 05 f150 with a4.6 and it lost all power it has around 240,000 miles they changed coil packs and spark plugs and still cannot get more than 5 mph out of it eve at full throttle and it also has no catalytic converters due to being stolen off of it plugged it into a scanner and couldn't get no codes to come up and also tried to reset the computer but taking off the battery terminal and no change trying to find out what to do next
@ashleyroberts4904
4 жыл бұрын
Great video helped me solve my issue
@MrVovapl
6 жыл бұрын
In my Navigator 06 I have Code P0012. Engine shake at all of revolutions. My mechanic check compression and oil pressure, both in norm. Ignition coil and spark plugs are new, vct solenoids too. Coul'd it be jumping timing chain? I dont have any missfire or something like that only one code on PCM. Any sugestion? Car have 114k miles. Check on carfax looks like original. I both it 3 month ago at auto auction, previos owner change all parts i sad beffore and get no results so i thing he sold it. Pleas help me with some ideas, im from Poland so hear is not so popular car and mechanic doesnt know enything about this engine.
@thewobblysender7048
7 жыл бұрын
I'm stumped. Got in my 06 expedition 5.4 started it up and it would barely idle. Pinged, backfired and knocked under load. Scanner showed bank 1 timing way advanced at idle. Unplugged bank1 vct no change. Replaced VCT and truck now runs and timing is normal but rough idle with no power. Getting 8mpg and the only code that comes up is p0171. Bank 1 lean. Changed intake manifold, bank1 injectors, plugs, coils, still no change. Cats check out fine. The darn thing was running perfect prior. I cant figure it out. Any help would be greatly appreciated. Thanks
@johncarden2823
5 жыл бұрын
Did a set of these today 2008 ford f150 the clip and the piece above clips are gone springs are still in both but everything else is gone ran a small camera in areas I could get to couldn't see anything anyone else had this happen
@iron4577
Жыл бұрын
Is it possible the new oem can be faulty? Cause I change mine when in a month and just started keeping tuck open but only when it’s hot and it’s happens once a while
@douglasvalverde3338
3 жыл бұрын
help me I have mazda cx7 year 2008 the engine was rectified and now the p0012 is not removed
@gingi801
3 жыл бұрын
When my truck is idle, bank 2 is right at 13degrees. should it be at 0 when idle? Bank 1 is at 0 on idle
@71manny89
4 жыл бұрын
Can someone give me some insight on this issue. I have a 2006 expo 5.4 3v. I got a code for p0012 and p0420. At first didn't feel much difference except for one time it felt shaky like it wanted to jump. I changed the both vct with ford parts. Surprising the bank 2 had a torn scene stuck in the port but never got a code for it. I changed oil and the truck drove great. Code p0420 went away but p0012 keeps coming up pending disappears then comes back. Truck makes no sounds from phasers. It sounds good idles at 750 with no problems. Although I feel like if I floor it it has a second of hesitation. Any thoughts?
@kinghulk4142
5 жыл бұрын
The most stupidest design ever!I've replaced the senors twice and the engine light still on and can't pass the inspection...they are brand new too
@Camelfacekamala
3 жыл бұрын
So do the 5.0 f150’s never have problems? I don’t think I’ve ever seen you do a 5.0 video
@Elvergalargax
7 жыл бұрын
what do you think on 2007 f150 5.4 . was running good and after replacing the vct on driver side I see those codes and engine shake and make noise like a popcorn w rev , and smell Very bad , what do you think , I might forget do something? (no codes)
@amtpdb1
8 жыл бұрын
I have a 5.4l 2004. Could these failing cause the mileage to lowering as the cams don't advance? The best mileage I see is 11-12 on the freeway empty! 9or 10 on the street. Thanks for the videos.
@amtpdb1
8 жыл бұрын
+amtpdb1 Forgot to say only 125,000 miles on it.
@FordTechMakuloco
8 жыл бұрын
+amtpdb1 if it is not advancing the timing you will know it as the timing is constantly monitored for emissions reasons. The most common reason for dropping mileage is a skewed input to the PCM, drag on the driveline and restricted cats.
@amtpdb1
8 жыл бұрын
+FordTechMakuloco Thanks for the information. Have a nice day.
@tedthornton7791
6 жыл бұрын
amtpdb1 on my 5.4 f150 lariat i get 13.5 anywhere. If i disconnect battery to reset computer, i get 16.8 hwy.
@pault4513
Жыл бұрын
We have a engine thats just been rebuilt Because the phaser came apart and jumped timing First time starting it up right bank cutting out we are not seeing any timing related code but evap codes this engine is in a race car
@anadavidf6163
2 жыл бұрын
Do you have a video where you have to remove valve cover on passenger side? I have to disconnect AC line as well and I'm no mechanic. I only see the easy replace or removed engine vids.
@erix7312
2 жыл бұрын
Does the 1998 cobra have a vct been searching around and there’s rarely any info on the sn95 cobras
@togodbetheglory9725
7 жыл бұрын
I have a ford f 150 2004 the engine light came on the code shows P0012 wich is the camshaft solenoid. But also Mecanics saying that it could be the camshaft
@wesleysmith6651
3 жыл бұрын
can i use 10w40 in my 1999 ford f250 with the 5.4 triton engine
@coyote50585
3 жыл бұрын
There are so many VCT solenoids on the market. Can I use aftermarket brand VCT valves like melling or gates and will it be ok? I know the Ford Parts are the best but I can get the aftermarket mentioned locally and half the price.
@mrc5098
2 жыл бұрын
Don’t do that
@telecommutejobs628
7 жыл бұрын
Could this cause a loud ticking noise if the VCT solenoid is bad?
@greenknuckle77
Жыл бұрын
Yes
@russellfoote3910
6 жыл бұрын
'98 F150 5.4 Aluminum intake manifold. I just changed heater core. Then the piece that the coolant temp sensor screws into (behind the alternator) and it screws into front intake manifold crossover, because the 1/4 tube that a coolant hose goes on was rusted and leaking. No more leaks, but Now the engine is shaking and no response on acceleration. Starts right up and no problem at stop light. Ran like a champ before I worked on it. Any advice? Also have a p0001 code
@partsbrothers7776
6 жыл бұрын
Do these solenoids act up when the vehicle is running at its regular temperature?
@stephenvilcot9208
7 жыл бұрын
First, Thank you for some amazingly informative videos. They have saved my butt more than a few times. But now I have a new problem that I haven't found a specific video for, unless I'm missing it. I changed my vct solenoids a year ago with oem parts, as well as cps at the same time. Truck ran fantastic up until this week. It idles rough, runs fine (although it seems underpowered), and then starts running rough again when it shifts into overdrive and runs about 12-1700 rpm. I'm getting a p0172 and p0012 codes. Is it time for phasers or could somethin else be causing these problems? Thank you again for saving me time and money. Stephen
@FordTechMakuloco
7 жыл бұрын
Check oil pressure first if it is low you can have erratic vct operation and these codes.
@SergioGomez-ki5sl
4 жыл бұрын
07 f150 p0022 n 22 replaced both vct solenoids disconnected them still rattles when up to operating temperature
Пікірлер: 410