Buenas noches desde Venezuela ya hice el desmonte de la bomba y los brazos hidráulicos quiero saber cómo colocar todos los sellos y otras cosas para almar eso
@Nitroredneck199
Жыл бұрын
Got a question for ya, there’s an adjustment bolt & jam nut on the clutch side of the tractor just ahead of the PTO lever. Any ideas on what that is? Seems to be related to the PTO, as someone (maybe me) unthreaded it all the way out thinking it was a fluid level check hole. Come to find out that bolt has a pin on the end of and now the tractor won’t engage the PTO….rookie!!
@Nitroredneck199
Жыл бұрын
I’m thinking it has to be a retention pin of sorts for the internal PTO linkage as everything was fully functioning before it was removed. Any thoughts would be appreciated otherwise I might have to break out the horse-drawn hay baler
@danielaltman9945
Жыл бұрын
@@Nitroredneck199 that is exactly what it is. You'll need to remove the lift cover to put it back in. @1:20 you can see the oil supply assembly for the PTO clutches on the inside of the case next to the outside PTO handle. Sorry I got back to you so late on this. It's a pretty simple fix. I'd recommend a new pickup screen for the hydro pump and lift cover filter while your in there. Use an engine hoist to pick straight and down as there are alignment dowels. Also going to be an o-ring on the hydro pump side where the pieces are bolted together. You must change that o-ring out or it will leak. I'd even change out PTO clutches if it was me. The Israeli Made clutches are the best in my opinion.
@sproket168
Жыл бұрын
What is the lever for on the right-hand side just above the ring spanner and plastic cup
Пікірлер: 10