Great video. That's the next step in my 1952 8N Winter project. Dad bought the tractor in '53 and I grew up driving it on the farm and in the woods.
@Jason1Pa
7 ай бұрын
Sorry for the late reply. I just noticed your comment. That's awesome to still have the old Ford. I have my grandfather's 1945 2N as well. Good luck on the repair!
@Glens1965
Жыл бұрын
Thanks for the tips.. I dread the day when my 51 needs this attention.
@Jason1Pa
Жыл бұрын
It's not too traumatic. Just take your time and plan for what could go wrong. Like most projects if you have plan and several options you won't need them. 🤣
@TractorHoarders
Жыл бұрын
Hey Jason - great video! I enjoyed the camera angles and editing. You make it look easy. Thanks for the great tutorial.
@Jason1Pa
Жыл бұрын
🤣 Thanks man!!
@rickolson9011
Жыл бұрын
Boy that was a test(s) of perseverance! Thanks for sharing the journey.
@Jason1Pa
Жыл бұрын
Yeah especially the small pin. It was extremely difficult. Not only was it rusted bad,but discovered it had a very slight bend to it.
@knuckle47
Жыл бұрын
It is 11:20pm and I was going to bed… my iPad lit up and posted a notice that your video is available on KZitem….you’re videos are all so good, I’m staying up to watch. 👍. Thank you for such great information and demo
@Jason1Pa
Жыл бұрын
😆 That's funny!! I'm fighting sleep just to get this video edited and uploaded! Hope it was worth it!
@knuckle47
Жыл бұрын
@@Jason1Pa 101% worth it. Going to check mine out in the morning
@ontariovintagetractor
Жыл бұрын
Your videos are always knowledge packed and informative! Great video! 👍🏻
@Jason1Pa
Жыл бұрын
Thank you Sir 😊 Maybe someday soon I'll have a Allis video! 😮
@steveaw5895
Жыл бұрын
Next time put the bushing and pin in the freezer over night. It will shrink them an make installation easier. I like your videos, they’re very informative. Thanks for posting.
@Jason1Pa
Жыл бұрын
I've yet to have that trick work. I don't even bother. I can see dry ice working, but don't feel like wasting time and money when I can just heat it up. The axle expanded way more then what that bushing would of shrank sitting in the freezer.
@GuntersGarage
Жыл бұрын
That sounded like it went about the way I was thinking it would go. Old rusty pins well rooted in their hole for decades, lol. Its those little things that make a good restoration and a solid tractor. I love my 8 N and cant wait to give it a solid resto.
@Jason1Pa
Жыл бұрын
Absolutely!! I hate sloppy!! 😆 So good to hear from you hope all is well!
@GuntersGarage
Жыл бұрын
@@Jason1Pa were doing good, I havent had the urge to post anything on yt. Ive been posting a little on IG. Its easier a couple pics, quick description and done.
@Jason1Pa
Жыл бұрын
@Gunters Garage That's for true. Sometimes YT videos will have me thinking what did I get myself into? 😆
@scottwalters9708
6 ай бұрын
Nicely done.
@Jason1Pa
6 ай бұрын
Thanks Scott!!
@terryhiggins9700
Жыл бұрын
Those pins, and the pins in the lift arm knuckles are usually buggers to get out. Nicely done ✔️ 👍
@Jason1Pa
Жыл бұрын
They sure are! They can give you a physical and mental workout!
@jameslester3861
Жыл бұрын
I have a '51 that one of the previous owners "welded" the support pin flange to the axle support assembly. I guess the bolt that holds it on must have had the head snapped off. The weld at some point broke because it was just dawbed and not actually welded. This allowed the pin to start moving and wearing. The radius arms have a really nice arch to them which they are not supposed to have. I got the pin out no problem as it was quite loose and much to my amazement the pin was worn badly but the bushing was not. I was expecting to have to take the center axle piece to the machine shop for some major work. fortunately I have the new pin and bushing for my '49 that did not require they be replaced.
@Jason1Pa
Жыл бұрын
Good to hear!! Sometimes these things can be a real bear. Sad to hear your arms got bent. I'm glad for you the welds were not good welds or that would be terrible.
@bugbomb8048
Ай бұрын
Excellent as always…..!
@Jason1Pa
Ай бұрын
@@bugbomb8048 Thanks!
@rockerpat1085
Жыл бұрын
You Made That Look Easy!!! I'm Sure Henry Needs The Same Love When I Fix His Engine!!! Keep Rocking It Out Brother!!!
@Jason1Pa
Жыл бұрын
Editing can make anything look easy!! 😆 Sure can't wait to see some Henry videos.
@dehavenfamilyfarm
Жыл бұрын
Well done on the video! I tend to talk to much during repair videos- as you will see in my video posting tomorrow 😂 I am still surprised that the pin isn't greasable. Great info!
@Jason1Pa
Жыл бұрын
It's so hard not to talk too much. I can't wait for your video!
@doylerabjohn3435
Жыл бұрын
Great job....Very instructional allways did like your videos
@Jason1Pa
Жыл бұрын
Thanks Doyle!! I'm happy you like them!
@farmall51
Жыл бұрын
Great video. People usually never properly maintain steering components ever .
@Jason1Pa
Жыл бұрын
They sure do get used and abused!
@SuperFcsmith
Ай бұрын
I’ve got a Ford 3610 and I’m trying to remove that axle pin to replace the broken bushing. I had to take off the fan & radiator because of a broken fan blade pierced the radiator. How do I loosen the pin using a 1-5/8 socket wrench?
@michaelduttry182
Жыл бұрын
Good video. I know all about those ten minutes jobs that takes hours. Murphy's law.
You can shrink a bushing by running a weld bead inside it.
@Jason1Pa
7 ай бұрын
I know. Already had the chisel out. I had it out faster then what it would take to get the welder out. Normally they about fall out our worn paper thin.
@andrewmantle7627
Жыл бұрын
Tell us more Jason. The real deal never hurt anyone. Put up the camera even if you're digging a drainfield.
@Jason1Pa
Жыл бұрын
😆 🤣
@andrewmantle7627
Жыл бұрын
Good to see you Jason.
@Jason1Pa
Жыл бұрын
It's good to be back! Thanks for checking this out!
@TheFarmacySeedsNetwork
3 ай бұрын
5:10 Notes to self: Never change this! 😂
@Jason1Pa
3 ай бұрын
🤣😂😅 Sometimes you have no choice. Just hope that you don't have a stubborn one.
@AntiqueCarsandStuff
Жыл бұрын
Excellent. Thanks for posting!
@Jason1Pa
Жыл бұрын
Thanks!!
@jeffgodsey2875
Жыл бұрын
finishing up engine in my 8n my king pen just fell out i thank the front bucket played a part in it
@Jason1Pa
Жыл бұрын
😆 Most definitely. Them loaders make everything loose!
@d.brownjr.4845
Жыл бұрын
I have a 50 model 8n ford that needs that very job done. Where did you find the pin and bushing? Them smaller pins is slop on mine as well. Can you get the whole kit? Probably wouldn't hurt to get king pin bushings also for both sides. Do away with the death wobble.
@Jason1Pa
Жыл бұрын
There is no kit available so you need to purchase the individual parts. When I'm working on Fords I only get parts from Just8ns. com or Dennis Carpenter. All though every part needs to to be slop free for the wheels not to wobble the large majority of slop that causes the wheels to wobble is in the steering gear box itself.
@MrVintageRestoration
Жыл бұрын
Great video! I'm sure these are pretty wore, especially on tractors with loaders!
@Jason1Pa
Жыл бұрын
Without a doubt. Loaders kill.
@mikirecords4243
Жыл бұрын
90 like,best wishes;-)
@delgriffith1
2 ай бұрын
Curious about the shim washers and spacer on this. My 860 doesn't have any of that and there's about an inch of axial play along the axle pin. The radius arms hold the axle longitudinally though and so I thought maybe that axial play is necessary for the radius arms to be able to swing one way or the other. (might pull the axle back or push it forward as they do.) Is there a set amount of axial play needed?
@Jason1Pa
2 ай бұрын
@delgriffith1 I don't have any hands on experience with the 860 front ends,but looking on the parts diagram it appears that I don't see any spacers listed which seems rather odd. On the 8N it does call for one spacer then a washer/spacer. I added more cause there was enough slop. I jacked up the front high and rocked the front end up and down and there was no binding. You do need some play for front to back movement, but it's not much. I try to keep the strain off of the radius arms where they insert into the socket near where you feet go.
@delgriffith1
2 ай бұрын
@@Jason1Pa Makes sense that it wouldn't need a lot of play back and forth to accommodate radius arm swing. The full inch of slop concerns me on my 860. Tempting to put in spacers but at the same time that was the design it seems.
@Jason1Pa
2 ай бұрын
@delgriffith1 Yeah I wish I could offer more help or even look at another one but I don't know anyone that has one. It just doesn't seem right to have that movement.
@timgiesin4025
10 ай бұрын
On your radius arm pins could you just use a 5/8 grade 8 bolt?
@Jason1Pa
10 ай бұрын
You could. I've done it before, but just be careful not to tighten it much. You'll actually squeeze the ends of the arms and kind of cause a bind when going over uneven ground. It's ideal to use a pin though.
@timgiesin4025
10 ай бұрын
That is what I thought but I wanted another opinion
@michaelmilner1863
10 ай бұрын
Where did you get the bushings?
@Jason1Pa
10 ай бұрын
All the parts in my Ford videos come from Just8ns. com or Dennis Carpenter
Пікірлер: 66