Someone please post installation to aux switches... Noob here
@texasbradley
Жыл бұрын
Can you please make a more detailed video this? I know you may realize that it's already detailed in your opinion, if you could just elaborate more on the wiring part and show more visuals would be great. Thank you.
@FrankieBoy11-y2p
Ай бұрын
I imagine the lights will fall out with bumps and gravity over time as they’re not really secured in there other than pushing them in there with your fingers. Plus that install is a nightmare. Have to pass but I do love the look at night
@thebroncoandmustang
Жыл бұрын
Damn that’s a lot of wire for 2 strips of lights
@peterpandad5418
Жыл бұрын
Could easily just cut them, splice and shrink wrap it together.
@1018Tim
Жыл бұрын
I betting these could probably be tapped into the Bronco's factory ambient lighting if you have it. I believe there are factory connectors under the seats too.
@modernbassheads5051
9 ай бұрын
Can you guys make a fiber optic roof lighting package
@christianfuentes1138
11 ай бұрын
Lots of work
@4U2C-24
7 ай бұрын
I can get mine to stay in on the bottom
@chasejohnson2550
5 ай бұрын
Looks like it would be cool at night but look cheap during the day
@yaramus97
Жыл бұрын
Just installed the product and it shows no device connected. Any suggestions? I installed a cigarette adapter hardwired just like the video.
@yaramus97
Жыл бұрын
After months of the Oracle fiber optic lights being on backorder I finally received them and installed them. FYI I have a 2022 Badlands and I followed the installation video, the grounding bolt they use didn’t work for me so I had to choose a different location, they also ran fiber underneath and behind steering wheel I ran my on top of steering wheel. The major problems with installation is by the side grab handles, on the grab handles there is a small fin I’ll call it will pinch the fiber and block the light from coming thru it happened to me which caused me to route fiber on top of steering wheel which I like better. Also on bottom fiber run you have to cut or notch out the fin covering then goes in between the panels to go around the clips that hold panels together. Another tip don’t cut to the length they said just first install then cut as much access you want. Otherwise I like the lights very much. I just thought I’d post something to let you all know what I found. www.oraclelights.com/products/oracle-lighting-ford-bronco-colorshift-fiber-optic-led-interior-kit
@tannermiller3058
Жыл бұрын
Ordered mine over 3 months ago and haven’t received any updates… Y’all even check your emails?
@definitelyduse
9 ай бұрын
Have u received them yet???
@rdwoodw
Жыл бұрын
seems like these could pop out of the gaps easily.
@ORACLElights
Жыл бұрын
Surface tension keeps it in place, never had an issue with it popping out.
@akalduwais
3 ай бұрын
Why ford doesn’t do that
@forgivemylaughter
Жыл бұрын
Meh, that install, not worth it.
@twistedstyles
Жыл бұрын
I have this on my bronco rubicon
@SniperVIIUS
8 ай бұрын
Sweet, love those Bronco Rubicons
@StevenLe-c5t
9 ай бұрын
This has not been an easy install. They kept popping out. I gave up.
@spencerbrooks8931
2 ай бұрын
Cause this dumbass told pppl to cut the strop
@zincto3129
Жыл бұрын
I just installed these, not very bright. Unless I installed them wrong somehow.
@ORACLElights
Жыл бұрын
Fiber Optics are not visible during the day, be sure you are testing them in darkness or low light (as they are displayed in the video).
@TheGregh1977
Жыл бұрын
looks good at night. fiber is easily viewable in the day. not very professional fit
@Southern62
Жыл бұрын
If you had aux switches, it gets even easier using the wires running to passenger side.
@ORACLElights
Жыл бұрын
Yes, good point you can connect to the factory Aux switches if you prefer.
Пікірлер: 29