I just did the seals on my C6. Thanks for posting the info. Much appreciated!
@Spideyjb
Жыл бұрын
gained a sub. thank you. i got a 70' f250 with a 460 and c6 transmission. perfect channel for me. thanks again
@ST-gp8jh
4 жыл бұрын
Not bad for one hand holding a camera! I'm going to be changing out seals in my 1970 F100/C6 in a couple weeks and was looking for some good reference. I'm tired of cleaning drip pans. Thanks!
@thmain1253
2 жыл бұрын
Super the best video ever. Awesome! Thanks.
@driftfly1
2 жыл бұрын
Great video thank you
@TweezerAddict
2 жыл бұрын
I subscribed for the bird.
@eddominates
3 жыл бұрын
you got yourself a sub my friend. Thanks for posting this, really informative and helpful. Takes some of the terror out of servicing an A/T to be able to watch you do it first. My shifter seals are leaking and the filter needs changed, I was dreading it but now I feel like it'll be no problem.
@hmdwn
4 ай бұрын
All that, and then guessing on the 'band' torque adjustment👎 And should toss a magnet in the bottom of the pan.
@andrewgarcia2798
3 жыл бұрын
I have a question about my piston placement on my filter mine seems to go more forward to the front of the truck than yours does it matter
@bentleynut1648
3 жыл бұрын
Very very helpful. Thanks for doing such an incredibly clear video. Really great.well done
@richardmason8044
Жыл бұрын
I know you’re doing a C6, but I,ve got a C4 and I was wondering if the rear output shaft at the Governor is supposed to have movement. Thanks
@dalelester9620
3 жыл бұрын
am i seeing a crack in the case ? 7:15 /7:22 top left of video
@rdd014r
4 жыл бұрын
Just did my trans using your guide. Thanks for posting.
@robertclymer6948
3 жыл бұрын
Thank you for a very good detailed video! I am only replacing the inside filter and putting on a new lube locker gasket. Not draining the torgue converter of the two qts of approx fluid so looking at like 8 qts after start up/warmup of fluid, will top off if needed. Don't forget, the C-6 uses "F" type. Thanks again for sharing. Cheers from Motown.
@ramonvillasmil9090
Жыл бұрын
Mi caja falda un poco para canbial que me recomienda que puedecer
@Louis-kk3to
10 ай бұрын
That stupid seal ,,,just yse the 7 / 8 wrench as a pry tool viola 😀
@MrAirsoftKid98
10 ай бұрын
What do you do if one of the arms move?
@simplytk5251
3 ай бұрын
Great guide man. I've been working on my dad's old truck and learning as I go. Your video made this so much easier than the first attempt. Thank you
@SBellew75
3 жыл бұрын
At 21:21, I was expecting any second something to latch onto your finger.
@Lost_in_a_Lexus
4 жыл бұрын
Thanks for posting this video. Watched this video while drinking my morning coffee then tackled doing the seals on my 1972 C6 that've been slowly leaking for years.
@artm5583
4 жыл бұрын
Thank you for your time and effort. Amazing video showing all the steps. I’m going to try this my self
@charlielong262
6 ай бұрын
Thanks for this explanation! Particularly the section on how to get the park pawl back into place and then how to get the kickdown lever seated properly in the valve body.
@kevindossilva5586
2 жыл бұрын
AGREE WITH EVERYONE ELSE THAT YOU DID AN EXCELLENT JOB WITH EXPLAINING HOW TO DO THIS.THANK YOU
@Iamjohniwanna
4 жыл бұрын
Really helpful. Thank you for showing all the details. I feel much more confident about tackling this job.
@latamorewilliams6443
Жыл бұрын
Did you have to reset it after you rebuilt it? Is that hard?
@Nolley21
7 ай бұрын
I felt that "aww whatever" when you saw the pan LOL
@raymanning1064
2 жыл бұрын
Great explanation showing how to. Much appreciated.
@559truckin
3 жыл бұрын
I forgot to put gasket sealant leaked all the fluid out
@Rhomka
3 жыл бұрын
Hello, what kind of liquid are you using to refill ? Lot of different type/brands... Thanks in advance
@kirtrajen2317
3 жыл бұрын
Mine takes only Type F
@michaelevans1495
3 жыл бұрын
lol I’ll I pop up I ipzoooopoop pop out pop play with you p
@tobiasheilig7914
3 жыл бұрын
Thanks for the video. It was a good help.
@michaelknight2897
3 жыл бұрын
What should the transmission be in when you do this, neutral, park? Are the bolts holes marked for long or short, or do you simply have to keep track?
@smathet7766
2 жыл бұрын
Put it park. Take a picture of it is before you take it apart as reference.
@ooCHICOoo
Жыл бұрын
thank you for sharing my friend
@howardlovecraft750
2 жыл бұрын
Where was the solenoid located?
@thomasculp3414
3 жыл бұрын
Nice job. Very helpful
@rigodiaz01
2 жыл бұрын
27:49 🤣🤣🤣 Great Video!
@ericlyons11
5 жыл бұрын
Great video, very helpful. Is there a seal for the filler tube? If so do you know how to replace that?
@ericlyons11
5 жыл бұрын
Also, do you have a link on ebay of the gasket kit you bought? Thanks.
@MichaelJohnson-fi3kj
3 жыл бұрын
Damn great video!
@xtremecouture6969
3 жыл бұрын
You wouldn't by chance have a link to wear you bought that seal kit would you? By the way thanks for the video 👍
@simplytk5251
3 жыл бұрын
I need that too. Most places don't seem to have or even know what I'm talking about.
@kirtrajen2317
3 жыл бұрын
Bought mine off eBay, says for all c6 transmissions
Пікірлер: 50